BLUETOOTH® DIGITAL ALARM CLOCK
WITH USB PORT FOR PHONE CHARGING
USER MANUAL
Thank you for purchasing a Buddee Bluetooth® Digital Alarm
Clock. For optimum performance and safety, read these
instructions carefully before connecting, operating or adjusting
this product. Refer to this manual for future reference.
INTRODUCTION
Wake up on time with the Bluetooth® Digital Alarm Clock from
Buddee. This product features a large digital clock with alarm,
FM radio and snooze functions so you will be up and ready for
any occasion.
Wirelessly stream your music via Bluetooth®, play via 3.5mm
auxiliary cable, or insert a TF / microSD card for playback. The
large LED display makes checking the time easy no matter
where you are in the room.
FEATURES
• Bluetooth
®
audio
•10m wireless range
• USB charging
• AUX input
• Alarm
• TF card playback
• USB port for phone charging
• Large LED display
• FM radio
• Dual speakers
PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging
and make sure the following items are contained in the shipping
carton:
• Bluetooth
®
Digital Alarm Clock
• Micro-USB charging cable
• 3.5mm AUX cable
• User manual
© Buddee Gear 2016. All rights reserved. The Bluetooth®
word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Buddee
Gear Pty Ltd. is under license. Other trademarks and trade
names are those of their respective owners.
Made in China
1 2 3 4 5 6 7
8
9
10
11
12
13
14
15
16
17
18
19
20 21 22 23 24
FUNCTIONS
1. Increase volume
2. Decrease volume
3. Play/pause and answer call
4. Previous button
5. Microphone
6. Mode (Toggle Bluetooth
®
,
AUX line-in, FM radio and
clock modes)
7. Next button
8. Alarm sound indication
9. Alarm indication
10. TF card indication
11. Month indication
12. Date indication
13. Day indication
14. USB mode indication
15. AUX mode indication
16. Bluetooth
®
indication
17. FM radio indication
18. Power display
19. Charging indication
20. AUX line-in audio port
21. USB port
22. TF card slot
23. Micro-USB port
24. Power switch (ON/OFF)
POWERING ON
1. Slide the power switch to the ON position and the display
will light up. The alarm clock will activate into Bluetooth
®
mode.
2. Slide the power switch to the OFF position to power down
the alarm clock.
CHARGING
1. Connect the micro-USB end of the included cable into the
charging port on the back of the alarm clock.
2. Connect the USB end with a powered USB source such as a
computer, laptop or USB wall charger. The charging indicator
will flash red. A flashing charging indicator light means the
alarm clock is low on battery.
3. Once the device is fully charged the charging indicator will
turn off.
NOTE: Please fully charge the alarm clock prior to first use.
ANSWER PHONE CALLS
1. To accept a phone call, firstly pair your mobile with the alarm
clock via Bluetooth
®
. Once paired, simply press the play
button located on the top of the alarm clock to accept an
incoming call. Your voice will be delivered through the built in
microphone.
2. To end the call, press the play button once more.
NOTE: You can also use the controls on your mobile phone.
BLUETOOTH® MODE
PAIRING A DEVICE AND PLAYING AUDIO
1. When activating Bluetooth
®
mode the LED display will flash,
indicating the alarm clock is waiting to be paired. When pairing
remain within one metre of the device.
2. In the Bluetooth
®
settings menu of the device you wish to
pair, select BD-ALMCLK-1 in the list of avaiable Bluetooth
®
devices. If your device requires a password, enter 0 0 0 0.
Refer to the manual of your device for specific instructions on
pairing and connecting Bluetooth® devices.
3. Once pairing is successful, the LED display will stop flashing.
Audio played through the connected Bluetooth
®
device will now
be heard through the alarm clock.
4. Use the controls on your connected device to select and
begin to play audio. To play/pause audio, skip songs or adjust
the volume use the controls on the top of the alarm clock. You
can also use the controls on your connected device.
TF / MICRO SD CARD MODE
1. Insert your TF or micro SD card into the slot located on the
back of the alarm clock. Press the mode button until you reach
the TF card mode. The TF indicator will light up on the
LED display.
2. Use the controls located on the top of the alarm clock to
play/pause, adjust volume or skip songs stored on your
TF card.
AUX LINE-IN MODE
1. Connect a 3.5mm AUX cable to your alarm clock in the AUX
port located on the back of the device. Press the mode button
until you reach the AUX Line-In mode.
2. Begin playing audio through your connected AUX device
and it will now be heard through the alarm clock speaker.
FM RADIO MODE
1. Press the mode button until you reach the FM radio mode.
2. Press the play button to search through radio stations
automatically. The alarm clock will then save found radio
stations as presets. You can skip through these preset stations
by pressing the previous button and next button.
NOTE: For radio operation, ensure one end of the 3.5mm AUX
cable (included) is attached to the back of the unit via the AUX
Line-In port. The other end of the AUX cable does not need to
plugged in an acts as an aerial.
SETTING THE TIME AND DATE
1. Press the mode button until you reach clock mode.
2. Press the next button and the LED display will begin to
flash. Keep pressing the next button again to sort between
changing the hour, minutes, month and weekday information
displayed on the alarm clock.
3. Use the increase volume and decrease volume buttons to
set the time and date.
USING THE ALARM
1. Press the mode button until you reach clock mode.
2. Press the previous button and the LED display will being to
flash. Keep pressing the next button to sort between setting
the hour and minutes for your alarm time.
3. Use the increase volume and decrease volume buttons to
set the time. Once you have set your desired alarm time do not
touch any buttons for approximately four seconds and the
alarm clock will display the current time again. This means it
has set successfully.
4. After setting your alarm, press the play button to toggle the
alarm from ON and OFF.
TECHNICAL SPECIFICATIONS
Input: 5V
Output: 5W x 2
Speaker size: Φ52mm
Impedance: 4Ω5W
Frequency: 100Hz - 18KHz
FM Frequency: 87.5 - 188MHz
AUX input: 3.5mm
Bluetooth
®
Version: 2.1+ESR
Battery Life: 4 hours at 80% volume
Loading...