B-TECH BT7017/B Datasheet

BT7017

SETTING THE POLE

VERTICAL

50MM POLE I-BEAM MOUNT

PLEASE KEEP THIS PARTS LIST FOR FUTURE REFERENCE

DRILL 5MM

HOLE HERE

PIVOT PLATE

PARTS LIST

No PART NAME QTY

1 PIVOT PLATE ASSEMBLY 1

2 M16 X 300 STUD LENGTH 2

3 I-BEAM U-CLAMP 2

4 M16 SPRING WASHER 4

5 M16 PLAIN NUT 8

6 M10 X 30 HEX BOLT 1

7 M10 OD19 T1 PLAIN WASHER 2

8 M10 NY-LOCK NUT 1

9 CLAMP TUBE ASSEMBLY 1

10 M10 X 10 GRUB SCREW 2

11 M8 X 60 ALLEN SAFETY BOLT 1

12 5MM ALLEN KEY (PART 10 + 11) 1

13 PLASTIC TAPER TRIM 1

14 M5 X 20 DOME HEAD SCREW 1

15 M5 OD12 T1 PLAIN WASHER 1

16 M5 NY-LOCK NUT 1

ASSEMBLY

CLAMP TUBE ASSEMBLY

WHEN MOUNTING HEAVY EQUIPMENT AN OPTIONAL LOCKING BOLT (PART 14) MAY BE USED TO SET THE POLE VERTICAL AT ANY INCLINATION.

- ONCE SECURED TO THE I-BEAM, ALLOW THE CLAMP TUBE ASSEMBLY TO NATURALLY HANG PLUMB.

- DRILL A 5MM HOLE THROUGH THE PIVOT PLATE ASSEMBLY USING THE SLOT IN THE CLAMP TUBE ASSEMBLY AS A GUIDE.

- PASS THE SCREW THROUGH BOTH ASSEMBLIES AND ADD THE WASHER AND NUT AS ILLUSTRATED.

- ENSURE SAFETY BOLT (PART 11) IS IN PLACE BEFORE ANY AV EQUIPMENT IS FITTED.

B-Tech International Limited, Croydon, CRO 9UG, UK

www.b-tech-int.com

B-Tech International, its distributors and dealers are not responsible for damage or injury caused by improper installation.

Specifications and Main Features