Bryant TSTATBBBAC01-B, TSTATBBBHP01-B, TSTATBBSAC01, TSTATBBSHP01, TSTATBBNAC01-B User Manual
...
THERMOSTATS
TM
THERMIDISTAT
BUILDER’S MODEL THERMOSTAT
* Models (AC, HP)
STANDARD PROGRAMMABLE THERMOSTAT
CONTROL
MODEL
TSTAT
The Bryant electronic thermostat product line consists of programmable and non-programmable air conditioner, heat pump,
and 2-speed models; a programmable dual fuel model; and a
programmable/non-programmab le Thermidistat
also offers builder’s and standard programmable thermostats in
both air conditioner and heat pump models. These units feature
non-mercury based electronic controls built into a subtle, slim
plastic enclosure. They require no battery back-up.
FEATURES/BENEFITS
BUILDER’S THERMOST A TS
COMPLETE OFFERING —Non-programmable air conditioner
and heat pump models available.
EASY TO USE —Rubber push buttons provide easy changes to
heating/cooling mode operation, fan operation, and desired temperature setting.
MANUAL CHANGEOVER —Allows manual switches in system
operation when both heating and cooling are needed on the
same day.
TM
Control. Bryant
* Models (AC, HP)
NON-PROGRAMMABLE THERMOST A T
* Models (AC, HP, 2S)
PROGRAMMABLE THERMOSTAT, DUAL FUEL,
AND THERMIDIST A T
TM
CONTROL
STANDARD PROGRAMMABLE THERMOSTATS
Bryant Standard Programmable Thermostats posess the same
features as the Builder’ s Thermostats plus:
COMFORT AND ENERGY SAVINGS —5-2 Day Programming
with four temperature changes per day means comfort for the
family.
EASY TO READ —Large LCD with clock.
NON-PROGRAMMABLE THERMOSTATS
CLEAN DESIGN —Features soft, responsive buttons and an
easy-to-read backlit Liquid Crystal Display (LCD).
ACCURATE, RELIABLE TEMPERATURE CONTROL —LCD
shows current room temperature at all times, and desired temperature prompts upon demand.
AUTO CHANGEOVER —Switches system operation automati-
cally when both heating and cooling are needed on the same
day. It can be disabled if not necessary in certain areas of the
country.
OUTDOOR TEMPERATURE DISPLAY —Allows a check of the
temperature outside before leaving home. (Optional on heat
pump and 2-speed models.)
CLEAN FILTER INDICATOR —Tells when it is time to clean the
system’s filter.
BATTERY FREE —Non-volatile RAM chip requires no battery
backup.
EQUIPMENT ON INDICATOR —On all non-programmable mod-
els, HEAT ON or COOL ON indicator is displayed when the
heating or cooling equipment is operating.
PERFECT COMPLEMENT —Completes your Bryant total com-
fort system needs.
LIMITED WARRANTY —Standard 1-year warranty available on
all parts.
* Models (AC, HP, 2S)
* Dual Fuel Model (DF)
* Thermidistat
TM
Control Model (RH)
PROGRAMMABLE THERMOSTATS
Bryant programmable thermostats possess the same features as
non-programmable thermostats plus:
Form No. PDS TSTAT.0.4
COMFORT AND ENERGY SAVINGS —
Seven day programming, with 4 temperature changes provided per day, means
comfort when the family is at home and
savings through reduced energy usage
when the family is away or asleep.
EASY TO USE —Simple instructions are
located inside the thermostat’s door .
DUPLICATE PROGRAMMING —Copy
the comfort schedule from one day to the
next using the copy previous day function.
OVERRIDE CAPABILITY —Hold function
allows the regular schedule to be bypassed with a temporary setting.
BATTERY-FREE —Non-volatile RAM chip
requires no battery backup. Program is retained in memory so reprogramming is not
required after power loss.
SMART RECOVERY —Provides consis-
tent heating right on time as it gradually
adjusts indoor temperatures before a
scheduled change.
TIMEGUARD —Equipment protection.
DUAL FUEL MODEL
The dual fuel thermostat can be used to
control a gas furnace and a heat pump.
This thermostat eliminates the need for
an interface control kit. The outdoor temperature sensor is included.
THERMIDISTAT
TM
CONTROL
Bryant’s Thermidistat Control can be used
to control any equipment application except zoning. It possesses all the features
and benefits of Bryant’s non-programmable and programmable thermostats plus:
ENHANCED COMFORT —Allows the
homeowner to accurately maintain the
desired temperature and humidity settings in the home. By combining the
functions of a programmable/nonprogrammable thermostat and a humidistat, the Thermidistat Control provides
temperature control, humidity control,
and dehumidification.
HUMIDITY CONTROL —The Thermidi-
stat Control accurately controls humidity.
It controls humidification during heating
and dehumidification during cooling.
AUTOMATIC HUMIDITY ADJUSTMENT —When used with the outdoor
temperature sensor, the Thermidistat
Control automatically adjusts the humidify setting, reducing excess condensation from forming on the windows.
VACATION MODE —With a single touch
of a button, vacation mode adjusts all
comfort levels for optimum efficiency
while the home is unoccupied—or restores the settings to normal upon return.
SMART RECOVERY —Provides consis-
tent heating and cooling right on time as it
gradually adjusts indoor temperatures before a scheduled change.
EQUIPMENT ON INDICATOR —When
the cooling system is operating, the word
COOL preceded by a small triangle is displayed below the cooling set point. When
the heating equipment is operating, the
word HEAT preceded by a small triangle
is displayed below the heating set point. If
the equipment turn on is being delayed,
the triangle and the word will flash.
NON-PROGRAMMABLE OPTION —Offers
the same popular humidity control benefits to consumers who do not need the
added benefits of programming. Nine
functional buttons, along with the UP and
DOWN buttons, mak e it easy to enter the
temperature and humidity set points. The
LCD is the largest display on the market
for a non-programmable thermostat.
T STAT
THERMOSTAT
BB
BB – BRYANT BRAND
MODEL NUMBER NOMENCLATURE
ELECTRONIC THERMOST A TS
ACN
AC – AIR CONDITIONING
HP – HEAT PUMP
2S – TWO SPEED/TWO STAGE
DF – DUAL FUEL
RH – RELATIVE HUMIDITY (THERMIDISTAT CONTROL)
B – BUILDER'S MODEL
S – STANDARD PROGRAMMABLE
P – PROGRAMMABLE
N – NON-PROGRAMMABLE
01
QUANTITY
–B
SERIES
A99046
As an ENERGY STAR® Partner,
Bryant Heating & Cooling Systems has
determined that the programmable
thermostats and programmable
Thermidistat Control meet the
ENERGY STAR® guidelines for
energy efficiency .
—2—
DIMENSIONS
2 3⁄4″
Builder's Model Thermostat
31⁄2"
4 1⁄4″
3
⁄4″
3
⁄4″
3 1⁄2″
4 3⁄8″
51⁄2"
Standard Programmable Thermostat
1 3⁄8″
5 13⁄16″
Non-Programmable Thermostat
1 3⁄8″
7 3⁄8″
Programmable Thermostat and Thermidistat Control
A99224
—3—
Loading...