Heating & Cooling Systems
COOL
AUTO
74
72
Heat Pump & Heat Cool
HEAT
72
USERS INFORMATION MANUAL
MODEL TSTATBBNB001
PROGRAMMABLE DIGITAL
THERMOSTAT
NON-PROGRAMMABLE DIGITAL
THERMOSTAT
Dual Setpoint
Thermoglow Backlight
No Batteries Required
Auto Changeover
Locking Keypad
Meets California Title 24 Residential
Table Of Contents
FRONT PANEL
DISPLAY
BASIC OPERATION
ADVANCED SETUP
ABOUT ADVANCED OPERATION
WARRANTY
CAUTION
Follow Installation Instructions before proceeding.
SET THERMOSTAT TO MODE “OFF” PRIOR TO
CHANGING SETTINGS IN SETUP OR RESTORING
FACTORY DEFAULTS.
Residential Light Commercial Systems Carrier Corporation 04/01
2
3
4
6
10
13
TSTATBBNB001
Page 1
Front Panel
3
4
1
COOL
AUTO
74
72
1
Liquid Crystal Display
HEAT
72
5
with Thermoglow
Up/Down Buttons
2
Mode Button
3
2
Fan Button
4
5
Heat or Cool Indicator
Heat = Red, Cool = Green
Page 2
Display
1
AUTO
COOL
88
2
HEAT
88
1
1
Mode Indicators
Selects the operation mode of the equipment.
HEAT - indicates the heat mode.
COOL - indicates the air conditioning mode.
AUTO - indicates the system will automatically
changeover between heat and cool modes
as the temperature varies.
OFF - indicates the entire system is turned off.
Page 6.
2
Room Temperature Display
Indicates the current room temperature.
3
Desired Set Temperature
Indicates desired room temperature(s). Page 7.
4
Fan Operation Indication
Fan On - indicates constant, continuous fan
operation.
When Fan On is not lit - indicates the fan will
only operate when necessary to heat or
to cool. Page 7.
OFF
Fan On
4
88
1
3
1
3
Page 3
Basic Operation
Select Mode
The HEAT setting indicates the
temperature the room has to
reach before the furnace will
turn on to heat the room.
The COOL setting indicates the
temperature the room has to
reach before the air conditioner
will turn on to cool the room.
72
72
HEAT
74
COOL
72
MODE
AUTO will automatically select
heat or cool based on room
temperature demand.
OFF indicates both heating
and air conditioning
systems are turned off.
Page 4
AUTO
72
72
OFF
COOL
74
HEAT
72
MODE
MODE