Bryant HRVBBSHA, HRVBBLHA, HRVBBSVA User Manual

HR VBBLHA, HR VBBSVA, HRVBBSH A
HEA T RECOVERY VENTILA TORS

Produc t Data

HRVBBLHA

The Heat Recovery Ventilation (HRV) system offered by Bryant
is the finest on the market today. The HRV provides efficient and
cost effective heat recovery during the heating season when
needed most.

As temperatures drop below 23_F(--5_C), indoor air is
recirculated periodically through the heat exchanger core to
prevent frost from forming. Competitors’ methods of
supplementary electric defrost waste energy. Unlike rotary wheel
heat exchangers which mix air streams, these cross--flow or
counterflow heat exchangers ensure that there is no mixing of the
stale air stream with the fresh outdoor air stream.

A filter installed on the incoming outdoor air stream removes
large airborne particles from the intake air stream before they
enter the heat exchanger and reduces the maintenance required.
The units’ acoustically engineered design makes the Bryant HRV
the quietest on the market and ensures that comfort is felt, not
heard.

Unlatching two (2) suitcase style latches allows easy removal of
the filters and core for cleaning.

NOTE: The HRV should not be installed in an attic or
unconditioned space unless provisions are made for drainline
freezing and condensation.

HRVBBSVA

HRVBBSHA

STANDARD FEATURES

S Energy saving defrost cycle
S Cross--flow, counterflow heat exchangers
S One filter on incoming air; one filter on outgoing air to

protect core

S Acoustical design
S No-- tools maintenance
S Polypropylene heat exchanger core

1

Model number nomenclature

HRV

Equipment Type:

Heat Recovery Ventilator

BB

Brand:

Bryant

LHA

Descriptor (A Series):
LHA --- Large Horizo ntal
SVA --- Small Vertical
SHA - -- Small Horizontal

1

Electrical Supply:

1 --- 11 5 V o l ts

150

Maximum Capacity:
100 CFM
150 CFM
250 CFM

HRV

Climate Map for Energy and Heat Recovery Ventilators

Edmonton

Vancouver

Calgary

Helena

Salem

Sacramento

Honolulu

Boise

Salt Lake
City

HRV Recommended

ERV Recommended w/HRV or ERV Wall Control

Denver

Regina

Winnipeg

Bismark

Austin

Minneapolis

Des Moines

Topeka

Oklahoma City

Green Bay

Madison

Springfield

Baton Rouge

Timmins

Milwaukee

Chicago

Indianapolis

Nashville

Detroit

Atlanta

Ottawa

Harrisburg

Washington D.C.

Columbia

Orlando

Montreal

Syracuse

Boston

Hartford

Raleigh

ERV Recommended

2

Controls and accessories part number nomenclature

K

K --- A c ce ss o ry Ki t

V

V --- H e at
Recovery
Vent il a to r

B

A--- Original Series
B---Seco nd Series

CN

A C --- Ac c es s o ry
CN--- Control
FL---Filter Media
TM---Timer

01

0 1 --- Pa r t N u m b er

01

0 1 --- Si n gl e P a c k

BAU

CONTROL DESCRIPTION

BAU ---Bryant Automatic Control
BBS---Bryant Basic Control
BST---Bryant Standard Control

ACCESSORY DESCRIPTION

6 F M --- 6 i n. Fl o w me t er s (2 )
7 F M --- 7 i n. Fl o w me t er s (2 )
8 F M --- 8 i n. Fl o w me t er s (2 )
EXH--- Exhaust Hood
HOD--- Intake Hood
KIT---Balancing Kit

TIMER DESCRIPTION

20C--- 20-Minute Timer Kit
60M--- 60-Minute Adjustable Timer Kit
FILTER DESCRIPTION (in. )
112--- 11-1/2 x 12-3/4
116--- 11-7/8 x 16-5/8
123--- 12-15/16 x 13-1/2
145--- 14-3/8 x 15-1/2
713--- 7-13/16 x 13-1/2
810--- 8-1/8 x 10-3/4
812--- 8-7/8 x 12-3/4
916--- 9 x 16-5/8

HRV

Kit Number Description Where Used

KVBCN0101BBS Basic HRV Control Used with all HRVs

KVBCN0101BST Standard HRV Control Used with all HRVs

KVBCN0101BLT Bryant OneTouch Control UsedwithallHRVsasamainwallcontrol

KVAAC0101HCO Intake and Exhaust Hood Used as a single intake/exhaust for HRVBBSVA1100, HRVBBSHA1100 only.

KVAAC0101HOD Exterior Intake and Exhaust Hood 2Required

KVATM010120B 20 Minute Push Button Timer Used with all HRVs when 20 minute manual operation is required

KVATM010160M 60 Minute Timer Used with all HRVs, time is adjustable between 10 and 60 minutes

KVAAC0101KIT Start ---Up Balancing Kit Start up Balancing Kit, includes (2) 6 in. Flow Meter Collars & Magnehelic Gage

KVAAC01016FM 6 in. Flow Meter Collar At start up, when 6 in. duct work is connected to HRV

KVAAC01017FM 7 in. Flow Meter Collar At start up, when 7 in. duct work is connected to HRV

KVAAC01018FM 8 in. Flow Meter Collar At start up, when 8 in. duct work is connected to HRV

KVAFK0101100 Internal Filter Used with HRVBBSHA1100, HRVBBSVA1100 Unit 10 1/2 in. x 6 3/4 in. x 1/2 in.

KVAFK0201150 Internal Filter Used with HRVBBLHA1150, HRVBBLHA1250 Unit 15 1/2 in. x 7 in. x 5/8 in.

3