Bryant DELUXE 355AAV, 355AAV EVOLUTION Product Data
355AAV EVOLUTIONtHIGH EFFICIENCY GAS FURNACE
DELUXE 4--WAY MULTIPOISE VARIABLE--SPEED
TWO--STAGE CONDENSI NG GAS FURNACE
Series 120 Input Rates: 40,000 thru 120,000 Btuh
Product Data
Perfect Heatt technology, the ultimate in heating
comfort . . .
The Bryant Evolutiont with Perfect Heatt technology achieves
the optimum combination of comfort and efficency.
The Evolutiont achieves industry--leading ultra--high efficiency at
up to 96.6 percent Annual Fuel Utilization Efficiency (AFUE).
Efficient performance is enhanced through the variable--speed
design. To maintain ideal comfort, Perfect Heatt technology
automatically adjusts the heating level, maximizing the use of low
heating levels that produce near silent furnace operation while
meeting the exact heating needs. This unit is designed to keep the
indoor temperature within less than 1 degree of the thermostat
setpoint. Because it operates in low heat most of the time, the
Evolutiont uses up to 80% less power than single--capacity
furnaces.
In addition to providing ultimate comfort, the Evolutiont has a
sealed combustion system. This system brings combustion air to
the furnace and vents flue gases outside the furnace in a safe
manner. Because it is sealed, operational noise is minimal. A sealed
combustion system also means fewer cold drafts and less air
infiltration.
Quality materials are the key behind the Evolution’st outstanding
performance. Bryant stands behind quality. We offer lifetime
warranty protection* on the heat exchangers, the heart of the
Evolutiont . The rest of the furnace is backed by a limited 5--year
A08030
warranty.
The Evolutiont is available in 6 heat/airflow combinations. The
unit has a 4--way multipoise design and can be installed in upflow,
downflow, or horizontal positions covering up to 24 different
applications. The Evolutiont can be vented as a Direct
vent/2--pipe furnace or as a non--direct vent/1 --pipe application.
The versatile 4--way multipoise design in conjunction with variable
speed makes the Evolutiont ideal for use with split system
cooling, including 2--speed units. A Bryant Evolutiont air
purifier, humidifier, comfort ventilator, and Comfort Zone II
control will provide year round comfort and efficiency.
Designed for durability, comfort, and reliability, the Evolutiont is
the ultimate in versatile, efficient comfort.
Bryant Evolutionr System — When the Evolutiont
variable--speed gas furnace is matched with the Evolutiont
Control and an air conditioner or heat pump, the homeowner will
experience the ultimate in Perfect Heatt and Perfect Humidityt
through unparalleled control of temperature, humidity, indoor air
quality, and zoning. The Bryant Evolutiont System also provides
unprecedented ease of use through onscreen, text--based service
reminders and equipment malfunction alerts.
1
For even greater comfort and convenience, match the Evolutiont
furnace with an Evolution air conditioner or heat pump. This will
create a fully communicating system, requiring only 4 thermostat
wires between system components. In some cases, troubleshooting
can even be done from the outdoor unit without entering the home.
Optional remote access through telephone or Internet is also
available when combined with a remote connectivity kit.
Evolutiont FEATURES / BENEFITS
Perfect Humidityt—The Perfect Humidity system actively
controls both temperature and humidity in the home to provide the
best comfort all year long. Other systems depend on heating or
cooling to manage the moisture in the air. But, Perfect Humidityt
gives the homeowner the right amount of humidity day and night,
even in mild weather. No other manufacturer can do this! Perfect
Humidity saves energy, too. By keeping humidity under control,
the homeowner can set their thermostat to stay comfortable and
save energy—up to 20% off their cooling costs!
Perfect Heatt—On the coldest days of the year, the Evolutiont
Furnace has the capacity to heat the home. On moderate days when
less heat is required, this furnace will regulate itself to a lower
355AAV
capacity—providing a comfortable home and minimizing
operating costs.
The patented algorithm adjusts the low heat operating time to
match the indoor conditions.
Reliable Heat Exchanger Design—The primary heat exchanger is
made of aluminized steel for corrosion resistance. The patented
Everlastict condensing heat exchanger cells are laminated with
polypropylene for greater resistance to corrosion and epoxy coated
externally to prevent oxidation. This break--through in heating
technology helps extend the life of the furnace for years of
dependable performance. The heat exchanger is positioned in the
furnace to extract additional heat. Stainless steel 409 coupling box
componentry between heat exchangers has exceptional corrosion
resistance in natural gas and propane applications.
Perfect Lightt Igniter—Bryant’s unique SiN igniter is not only
physically robust but it is also electrically robust. It is capable of
running at line voltage and does not require complex voltage
regulators as do other brands. This unique feature further enhances
the reliability of Evolutiont gas furnace and continues Bryant’s
tradition of technology leadership and innovation in providing a
reliable and durable product.
FanOnt—Improves comfort all year long by allowing selection
of the continuous fan speed right at the thermostat.
SmartEvapt—Allows the system to reduce summertime
humidity levels by nearly 10% over standard systems.
Media Filter Cabinet—Enhanced indoor air quality in the home
is made easier with our media filter cabinet—a standard accessory
on all deluxe furnaces. When installed as a part of the system, this
cabinet allows for easy and convenient addition of a Bryant high
efficiency air filter.
Perfect Heatt Control Center—The microprocessor control
center features state--of--the--art combustion, temperature, and
airflow control to maximize comfort while operating at peak
efficiency.
Combustion control is obtained by taking the inducer motor RPM
reading when the medium--heat pressure switch makes. Using this
information, the microprocessor maintains a consistent air--to--fuel
ratio independent of vent sizing and conditions during all phases of
heat.
The first cycle after power reset provides 16 minutes of low heat
before switching to high heat unless the room thermostat has been
satisfied. Subsequent thermostat cycles provide anywhere from 0
to 16 minutes of low or medium heat depending on the length of
the previous thermostat cycle.
Airflow control is accomplished by the microprocessor and blower
motor. The ECM blower motor is configured by the
microprocessor to react to changes in the static load on the air
delivery system. The ECM blower uses this information to deliver
correct airflow independent of variations in system restrictions.
(For example, dirty filter or zone damper changes during a cycle.)
A special dehumidification function allows direct input from a
thermidistat or humidistat. This input adjusts system airflow for
greater humidity removal and increased cooling comfort during
summer months.
Warranty—The Evolutiont heat exchangers come with a
Limited Warranty for lifetime of original owner in single family
residence; 20 years in other residential and commercial
applications. Five--year limited warranty on entire furnace.
Direct Venting or Optional Ventilated Combustion Air —The
Evolutiont can be installed as a 2--pipe (Direct Vent) furnace or
as a non--direct vent/1--pipe application. This provides added
flexibility to meet diverse installation needs.
Electronic Variable-- Speed Motors—ECM Motors
(Electronically Commutated Motor) provide variable--speed
operation to optimize comfort levels in the home year round. They
are also more economical to operate than standard motors.
Sealed Combustion System—Evolutiont brings in combustion
air from outside the furnace, which results in especially quiet
operation.
Insulation—Foil--faced insulation in heat exchanger section of the
casing minimizes heat loss.
Insulated Blower Compartment—The acoustical insulation
reduces air and motor noise for quiet operation.
Monoport Burners—The burners are finely tuned for smooth,
quiet combustion and economical operation.
Bottom Closure—Factory-- installed for side return; easily
removable for bottom return.
Blower Access Panel Switch—Automatically shuts off 115--v
power to furnace whenever blower access panel is opened.
Quality Registration—The Evolutiont is engineered and
manufactured under an ISO 9001 registered quality system.
Certifications—The Evolutiont, Model 355AAV units are CSA
(A.G.A. and C.G.A.) design certified for use with natural and
propane gases. The furnace is factory--shipped for use with natural
gas. A CSA listed gas conversion kit is required to convert furnace
for use with propane gas. The efficiency is GAMA efficiency
rating certified. The Evolutiont meets California Air Quality
Management District emission requirements.
These furnaces are not approved for installation in mobile homes.
2
FURNACE COMPONENTS
1
13
2
14
3
4
5
6
6
7
9
8
16
15
17
18
10
19
11
12
A02287
NOTE:
a. The 355AAV Furnace is built for use with natural gas. The furnace can be converted for propane gas with a factory--authorized
and listed accessory conversion kit.
b. Control location and actual controls may be different than shown above.
355AAV
1. Burner sight glass for viewing burner flame.
2. Burner assembly (inside). Operates with energy--saving,
inshot burners and hot surface igniter for safe, dependable
heating.
3. Combustion--air intake connection to ensure contaminant-free air (right or left side).
4. Redundant 2-- stage gas valve. Safe, efficient. Features one
gas control with two internal shutoff valves.
5. Junction box for 115--v electrical power supply.
6. Vent outlet. Uses PVC pipe to carry vent gases from the
furnace’s combustion system (right or left side).
7. Secondary condensing heat exchanger (inside). Wrings out
more heat through condensation. Constructed with patented
Polypropylene--laminated steel to ensure durability.
8. Pressure switches ensure adequate flow of flue products
through furnace and out vent system.
9. Inducer motor. Pulls hot flue gases through the heat
exchangers, maintaining negative pressure for added safety.
10. Condensate drain connection. Collects moisture condensed
during combustion process.
11. Heavy--duty blower. Circulates air across the heat
exchangers to transfer heat into the home.
12. Air filter and retainer. May be used for side return application.
13. Rollout switch (manual reset) to prevent overtemperature.
14. Primary serpentine heat exchanger (inside). Stretches fuel
dollars with the S-- shaped heat-- flow design. Solid
construction of corrosion--resistant aluminized steel means
reliability.
15. 3--amp fuse provides electrical and component protection.
16. Light emitting diodes (LEDs) on control center. Code
lights are for diagnosing furnace operation and service
requirements.
17. Perfect Heatt Control Center.
18. Blower access panel safety interlock switch.
19. Transformer (24v) behind control center provides low-voltage power to furnace control and thermostat.
3
BRYANT ACCESSORIES
DESCRIPTION PAR T NO.
Vent Termination Kit (Bracket Only for 2 Pipes)
Concentric Termination Kit (Single Exit)
Condensate Freeze Protection Kit KGAHT0101CFP X X X X X X
Condensate Neutralizer Kit (obtained thru
RCD)
Evolution Air Purifier Model GAPA X X X X X X
Condensate Neutralizer Kit (obtained thru
RCD)
Electronic Air Cleaner Model EACB X X X X X X
Mechanical Air Cleaner
Humidifier Model HUM X X X X X X
355AAV
Heat Recovery Ventilator Model HRV X X X X X X
Energy Recovery Ventilator Model ERV X X X X X X
UV Lights Model UVL X X X X X X
E Z F l e x M e d i a F i l t e r w i t h e n d c a p s --- 1 6 --- i n . ( 9
pack)
2 --- in. — KGAVT0101BRA
3 --- in. — KGAVT0201BRA
2 --- in. — KGAVT0501CVT
3 --- in. — KGAVT0601CVT
P908--- 0001 X X X X X X
P908--- 0001
Model FILCAB or EZXCAB
EXPXXLMC0016 X
042040 042060 042080 060080 060100 060120
X X X X X X
X X X X X X
X X X X X X
X X X X X X
UNIT SIZE
E Z F l e x M e d i a F i l t e r w i t h e n d c a p s --- 2 0 --- i n . ( 9
pack)
E Z F l e x M e d i a F i l t e r w i t h e n d c a p s --- 2 4 --- i n . ( 6
pack)
R e p l a c e m e n t E Z F l e x F i l t e r --- 1 6 --- i n . ( 1 0 pa c k ) EXPXXFIL0016 X
R e p l a c e m e n t E Z F l e x F i l t e r --- 2 0 --- i n . ( 1 0 pa c k ) EXPXXFIL0020 X X X
R e p l a c e m e n t E Z F l e x F i l t e r --- 2 4 --- i n . ( 1 0 pa c k ) EXPXXFIL0024 X
Exterior Filter Rack --- Universal, 1”
(adjustable from 14” to 24”) with filter
Unframed Filter 1 --- in. — 16 x 25
Unframed Filter 1 --- in. — 20 x 25
Unframed Filter 1 --- in. — 24 x 25
Combustible Floor Base (Not required when
evaporator coil case is used.)
* Factory --- authorized an d field ---installed. Gas conversion kits are CSA (AGA/CGA) recognized.
S 16 x 25 (406.4 x 635.0 mm) filters suitable for side retu rn on all furnace sizes.
EXPXXLMC0020 X X X
EXPXXLMC0024 X X
KGAFR0301ALL
KGAFR0306ALL
( 6 --- p a c k )
KGAWF1301UFR
KGAWF1306UFR (6 pack)
KGAWF1401UFR
KGAWF1406UFR (6 pack)
KGAWF1501UFR
KGAWF1506UFR (6 pack)
KGASB0201ALL X X X X X
X X X X X
X X X X X
X X X
X X
4
BRYANT ACCESSORIES (CONTINUED)
DESCRIPTION PAR T NO.
UNIT SIZE
042040 042060 042080 060080 060100 060120
N a t u r a l --- T o --- P r o p a n e G a s C o n v e r s i o n Ki t
(Single Kit)*
P r o p a n e --- T o --- N a t u r a l G a s C o n v e r s i o n Ki t
(Single Kit)
ECM Motor Simulator (replaces the ECM motor
to aid troubleshooting
Door Gasket Kit KGBAC0110DGK X X X X X X
Advanced Product Monitor (software and
hardware to link PC laptop to control board)
ECM Control Replacement Module --- 1/2 HP HK44EA122 X X X
ECM Control Replacement Module --- 1 HP HK52EA122 X X X
Gas Orifice Kit Size 42 (Qty 50) KGAHA0150N42
Gas Orifice Kit Size 43 (Qty 50) KGAHA0250N43
Gas Orifice Kit Size 44 (Qty 50) KGAHA0350N44
Gas Orifice Kit Size 45 (Qty 50) KGAHA0450N45
Gas Orifice Kit Size 46 (Qty 50) KGAHA0550N46
Gas Orifice Kit Size 47 (Qty 50) KGAHA1550N47
Gas Orifice Kit Size 48 (Qty 50) KGAHA850N48
Gas Orifice Kit Size 54 (Qty 50)
Gas Orifice Kit Size 55 (Qty 50)
Gas Orifice Kit Size 56 (Qty 50)
Gas Orifice Kit Size 1.25mm (Qty 50)
Gas Orifice Kit Size 1.30mm (Qty 50)
* Factory --- authorized an d field ---installed. Gas conversion kits are CSA (AGA/CGA) recognized.
S 16 x 25 (406.4 x 635.0 mm) filters suitable for side retu rn on all furnace sizes.
KGANP4101ALL X X X X X X
KGAPN3501ALL X X X X X X
KGASD0301FMS X X X X X X
KGAFD0301APM X X X X X X
See Installation Instructions for model, altitude, and
heat value u sages.
KGAHA0850P54
KGAHA0750P55
KGAHA0850P56
KGAHA05750125
KGAHA5750130
355AAV
5
THERMOSTAT AND ZONING CONTROL OPTIONS
NON---PROGRAMMABLE THERMOSTAT SELECTION
T C --- N A C o r T P --- N A C
T C --- N H C o r T P --- N H C For use with 1 speed Air Conditioner --- _F/_C, Auto Changeover
T P --- N R H * For use with 2 speed Air Conditioner --- _F/_C, Auto Changeover
* Model HP & 2 Stage thermostat must be field converted to air conditioner operation.
PROGRAMMABLE THERMOSTAT SELECTION
T P --- P A C
For use with 1 speed Air Conditioner --- _F/_C, Auto Changeover
For use with 1 speed Air Conditioner --- _F/_C, Auto Changeover,
7 --- D a y P r o g r a m m a b l e
TP---PHP*
T P --- P R H *
T B --- P A C
355AAV
T P --- P R H {
T P --- P R H }
SYSTXBBUID01---B
* Model HP & 2 Stage thermostat must be field converted to air conditioner operation.
{ Hybrid Heat™ thermostat is used with furnace and heat pump application.
} Thermidistat can be con figured for heatin g, cooling, an d Hybrid Heat applications. It must be configu red for each specific application.
For use with 1 speed Air Conditioner --- _F/_C, Auto Changeover,
7 --- D a y P r o g r a m m a b l e
For use with 2 speed Air Conditioner --- _F/_C, Auto Changeover,
7 --- D a y P r o g r a m m a b l e
For use with 1 speed Air Conditioner --- _F/_C, Auto Changeover,
5 --- 2 P r o g r a m m a b l e
F o r u s e w i t h t w o --- s t a g e a p p l i c a t i o n s --- _F/_C, Auto Changeover,
7 --- D a y P r o g r a m m a b l e
F o r m u l t i --- u s e / s t a g e c o n f i g u r a t i o n s --- _F/_C, Auto Changeover
7 --- D a y P r o g r a m m a b l e
Evolutiont user interface
ZONING CONTROL SELECTION
ZONEBB3Z(AC/HP)01 Zone Perfect Three --- Zone Kit
ZONEBB2KIT01--- B Zone Perfect Plus--- B 2 --- Z o n e K i t
ZONEBB4KIT01--- B Zone Perfect Plus--- B 4 --- Z o n e K i t
ZONEBB8KIT01--- B Zone Perfect Plus--- B 8 --- Z o n e K i t
SYSTXBBUIZ01--- B Evolution Zone User Interface
SYSTXBBRRS01 Evolution Remote Room Sensor
SYSTXBBSMS01 Evolution Smart Sensor
SYSTXBB4ZC01 Evolution 4 --- Zone Damper Control
6
T
MODEL PLUG
CONNECTOR
SW1 SETUP
SWITCHES AND
BLOWER OFF-
DELAY
AIR CONDITIONING
(A/C) AIRFLOW
SETUP SWITCHES
24-V THERMOSTAT
TERMINALS
STATUS AND COMM
LED LIGHTS
3-AMP FUSE
RANSFORMER 24-VAC
CONNECTIONS
115-VAC (L2) NEUTRAL
CONNECTIONS
USER INTERFACE
OR ADVANCED
PRODUCT
MONITOR
CONNECTOR
PL1 – LOW VOLTAGE MAIN
HARNESS CONNECTOR
SOFTWARE
VERSION
CONTINUOUS FAN
SETUP SWITCHES
(CF) AIRFLOW
EAC-1 TERMINAL
(115-V AC 1.0 AMP MAX.)
EXAMPLE:
V12 HK42FZ022 3407
PART
NUMBER
CONNECTOR
DATE
CODE
OAT
SW4 SETUP
SWITCHES
115-VAC (L1) LINE
VOLTAGE CONNECTIONS
HUMIDIFIER
TERMINAL (24-VAC
0.5 AMP MAX.
ACRDJ – AIR
CONDITIONING
RELAY DISABLE
CONNECTOR
PL3 – ECM BLOWER
CONNECTOR
PL2 – HOT SURFACE
IGNITER & INDUCER
MOTOR CONNECTOR
JUMPER
FLASH
UPGRADE
(FACTORY
ONLY)
HARNESS
BOARD SERIAL
NUMBER
Control Center
Heat Exchanger
Inducer Assembly
______________________________________________________________________________________________________________
355AAV
Concentric Vent Kit
A concentric vent kit allows vent and combustion--air pipes to
terminate through a single exit in a roof or side wall. One pipe
runs inside the other allowing venting through the inner pipe and
combustion air to be drawn in through the outer pipe.
A93086
Downflow Subbase
A88202
One base fits all furnace sizes. The base is designed to be installed
between the furnace and a combustible floor when no coil box is
used or when a coil box other than a Bryant cased coil is used. It is
A.G.A. design certified for use with Bryant 355AAV furnaces
when installed in downflow applications.
7
Loading...