Bryant 925SA Series, 925SA30040E14, 925SA42060E17, 925SA48060E17, 925SA60080E21 Product Data
...
925SA
PREFERREDt SERIES SINGLE--STAGE
4--WAY MULTIPOISE
CONDENSING GAS FURNACE, SERIES A
Product Data
A11264
The 925SA Multipoise SEER Boost Condensing Gas Furnace
features the single--stage Preferred™ System. The Boost ECM
multiple--speed blower motor is at the heart of the electrical
efficiency provided by this furnace. With an Annual Fuel
Utilization Efficiency (AFUE) of 96.2%, the Preferred single--stage
gas furnace provides added savings over standard gas furnaces.
This Preferred Gas Furnace features 4--way multipoise installation
flexibility, and is available in six model sizes. The 925SA can be
vented for direct vent/two--pipe, ventilated combustion air, or
single--pipe applications. A Bryant Preferred Control and Preferred
Air Conditioner or Heat Pump, can be used to form a complete
Preferred Series System. All units meet California Air Quality
Management District emission requirements. All sizes are design
certified in Canada. All sizes are design certified for use in
Manufactured Housing (Mobile Home) applications when used
with factory--approved MH accessory kit.
STANDARD FEATURES
S Quiet operation. Compare for yourself at HVACpartners.com.
S Most sizes meet ENERGY STARR Version 4.0 criteria for gas
furnaces: 95+ AFUE; AMACF electrical rating; 2% or less
cabinet airflow leakage. See table on Page 2.
S Ideal height 35” (889 mm) cabinet: short enough for taller coils,
but still allows enough room for service.
S Preferred Features—match with the Preferred Control for
Preferred System benefits.
S Silicon Nitride Perfect Light™ Hot Surface Igniter.
S SmartEvap™ technology helps control humidity levels in the
home when used with a compatible humidity control system.
S FanOnPlus™ technology allows control of continuous fan
speed from a compatible thermostat.
S External Media Filter Cabinet included.
S 4--way multipoise design for upflow, downflow or horizontal
installation, with unique vent elbow and optional through-the--cabinet downflow venting capability.
S Boost ECM multiple--speed blower motor, single--speed inducer
motor, and single--stage gas valve.
S Self--diagnostics.
S Adjustable blower speed forcooling, continuous fan, and
dehumidification.
S Approved for Twinning applications with accessory kit (42060
through 66120 models, only).
S Approved for Manufactured Housing/Mobile Home applications
with MH accessory kit.
S Aluminized--steel primary heat exchanger.
S Stainless--steel condensing secondary heat exchanger.
S Propane convertible (See Accessory list).
S Factory--configured ready for upflow applications.
S Fully--insulated casing including blower section.
S Convenient Air Purifier and Humidifier connections.
S Direct--vent/sealed combustion, single--pipe venting or
ventilated combustion air.
S Installation flexibility: sidewall or vertical vent.
S Residential installations may be eligible for consumer financing
through the Retail Credit Program.
S Certified to leak 2% orless of nominal air conditioning CFM
delivered when pressurized to 1--in. water column with all
present air inlets, air outlets, and condensate drain port(s) sealed.
LIMITED WARRANTY*
S 10 year parts and lifetimeheat exchanger limited warranty to the
original purchaser upon timely registration.
S Limited warranty period is five years for parts and twenty years
for the heat exchanger if not registered within 90 days of
installation.{
* For owner occupied, r esidential applications.
{Jurisdictions where warranty benefits cannot be conditioned on registra-
tion will receive registered limited warran ty benefits.
Select Models
CERTIFIED
Always Ask For
Use of the AHRI Certified TM Mark indicates a
manufacturer’s participation in the program. For
verification of certification for individual products,
go to www.ahridirectory.org.
1
CASING
SAP ORDERING
NO.
925SA30040E14 35 30 14.2 39,000 96.2% √ 695 0.10 385-925 1/2 - 5 16 120
925SA42060E17 35 30 17.5 58,000 96.2% √ 1000 0.12 530-1505 3/4 - 5 16 141
925SA48060E17 35 30 17.5 78,000 96.2% √ 1360 0.15 920-1610 3/4 - 5 16 151
925SA60080E21 35 30 21.0 78,000 96.2% √ 1360 0.15 795-2015 1-5 20 156
925SA60100E21 35 30 21.0 97,000 96.2% - 1700 0.20 1105-2110 1-5 20 166
925SA66120E24 35 30 24.5 117,000 96.2% - 2125 0.20 1385-2055 1-5 24 190
† Capacity in accordance with DOE test procedures. See rating plate.
‡ Heating CFM at factory default blower motor heating tap settings.
ESP --- External Static Pressure
√ Meets ENERGY STAR criteria
DIMENSIONS
(IN.)
H D W BTUH AFUE
RATED HEATING†
OUTPUT (BTUH)
ENERGY
STAR
HEATING
AIRFLOW
Heating
CFM
‡
Heating
ESP
COOLING
CFM
@0.5ESP
MOTOR
HP-SPEED
MEDIA
CABINET
SUPPLIED
(IN.)
APPROX.
SHIP WT
(LB)
FEATURES AND BENEFITS
SmartEvapt Technology — When paired with a compatible
thermostat, this dehumidification feature overrides the cooling
blower off-delay when there is a call for dehumidification. By
925SA
deactivating the blower off-delay, SmartEvap technology prevents
condensate that remains on the coil after a dehumidification cycle
from re-humidifying throughout the home. This results in reduced
humidity and a more comfortable indoor environment for the
homeowner.
Unlike competitive systems, SmartEvap technology only overrides
the cooling blower off delay. when humidity control is needed.
Once humidity is back in control, SmartEvap re-enables the
energy-saving cooling blower off-delay.
FanOnPlust Technology — Sometimes the constant fan setting
on a standard furnace system can actually reduce homeowner
comfort by providing too much or too little air! Fan On Plus
technology improves comfort all year long by allowing the
homeowner to select the continuous fan speed of their choice using
a compatible thermostat.
HYBRID HEATR Dual Fuel system — This system can provide
more control over your monthly energy bills by automatically
selecting the most economical method of heating. With HYBRID
HEAT, our system automatically switches between the gas furnace
and the electric heat pump as outside temperatures change to
maintain greater efficiency and comfort than with any traditional
single-source heating system. The heat pump also delivers
high-efficiency cooling in the summer.
Power Heatt Igniter — Bryant’s unique SiN igniter is not only
physically robust but it is also electrically robust. It is capable of
running at line voltage and does not require complex voltage
regulators as do other brands. This unique feature further enhances
the gas furnace reliability and continues Bryant’s tradition of
technology leadership and innovation in providing a reliable and
durable product.
Boost ECM Blower Motor — This basic ECM, or electronically
commutated motor, can provide an efficiency enhancement for
select Bryant air conditioner or heat pump systems. It uses less
electrical power than its PSC counterpart and also has a wider
range of speeds
Reliable Heat Exchanger Design — The aluminized steel,
clamshell primary heat exchanger was reengineered to achieve
greater efficiency out of a smaller size. The first two passes of the
heat exchanger are based on the current 80% product, a design
with more than ten years of field-proven performance and success.
These innovations, paired with the continuation of a crimped,
no-weld seam create an efficient, robust design for this essential
component.
The condensing heat exchanger, a stainless steel fin and tube
design, is positioned in the furnace to extract additional heat.
Stainless steel coupling box componentry between heat exchangers
has exceptional corrosion resistance in both natural gas and
propane applications.
Media Filter Cabinet — Enhanced indoor air quality in the home
is made easier with our media filter cabinet—a standard accessory
on all deluxe furnaces. When installed as a part of the system, this
cabinet allows for easy and convenient addition of a Bryant high
efficiency air filter.
4-Way Multipoise Design — One model for all applications –
there is no need to stock special downflow or horizontal models
when one unit will do it all. The new heat exchanger design allows
these units to achieve the certified AFUE in all positions.
Direct or Single-pipe Venting, or Optional Ventilated
Combustion Air — This furnace can be installed as a 2-pipe
(Direct Vent) furnace, in an optional ventilated combustion air
application, or in single-pipe, non-direct vent applications. This
provides added flexibility to meet diverse installation needs.
Sealed Combustion System — This furnace brings in combustion
air from outside the furnace, which results in especially quiet
operation. By sealing the entire combustion vestibule, the entire
furnace can be made quieter, not just the burners.
Insulated Casing — Foil-faced insulation in heat exchanger
section of the casing minimizes heat loss. The acoustical insulation
in the blower compartment reduces air and motor noise for quiet
operation.
Monoport Burners — The burners are specially designed and
finely tuned for smooth, quiet combustion and economical
operation.
Bottom Closure — Factory--installed for side return; easily
removable for bottom return. The multi-use bottom closure can
also serve for roll-out protection in horizontal applications, and act
as the bottom closure for the optional return air base accessory.
Blower Access Panel Switch
— Automatically shuts off 115-v
power to furnace whenever blower access panel is opened.
Quality Registration — Our furnaces are engineered and
manufactured under an ISO 9001 registered quality system.
Certifications — This furnace is CSA (AGA and CGA) design
certified for use with natural and propane gases. The furnace is
factory--shipped for use with natural gas. A CSA listed gas
conversion kit is required to convert furnace for use with propane
gas. The efficiency is GAMA efficiency rating certified. This
furnace meets California Air Quality Management District
emission requirements.
2
SPECIFICATIONS
Heating Capacity and Efficiency 30040 42060 48080 60080 60100 66120
Input
Output
Efficiency AFUE % (ICS) 96.2 96.2 96.2 96.2 96.2 96.2
Certified Temperature
Rise Range ºF (ºC)
Airflow Capacity and Blower Data 30040 42060 48080 60080 60100 66120
Certified External Static
Pressure (in. w.c.)
Airflow Delivery
@ Rated ESP (CFM)
Cooling Capacity (tons)
@ 400, 350 CFM/ton
Direct-Drive Motor Type Electronically Commutated Motor (ECM)
Direct-Drive Motor HP 1/2 3/4 3/4 1 1 1
Motor Full Load Amps 6.8 8.4 8.4 10.9 10.9 10.9
RPM Range 600 - 1200
Speed Selections 5
Blower Wheel Dia x Width in. 11 x 7 11 x 8 11 x 8 11 x 10 11 x 10 11 x 11
Air Filtration System
Filter Used for Certified Watt Data
High
Heat
High
Heat
(BTUH) 40,000 60,000 80,000 80,000 100,000 120,000
(BTUH) 39,000 58,000 78,000 78,000 97,000 117,000
High Heat
Heating 0.10 0.12 0.15 0.15 0.20 0.20
Cooling 0.5 0.5 0.5 0.5 0.5 0.5
High Heat 695 1000 1360 1360 1700 2125
Cooling 925 1505 1610 2015 2110 2055
400 CFM/
ton
350 CFM/
ton
40 - 70
(22 - 39)
2 3.5 4 5 5 5
2.5 4 4.5 5.5 6 6
KGAWF1606UFR
40 - 70
(22 - 39)
KGAWF1306UFR KGAWF1406UFR
40 - 70
(22 - 39)
Factory Supplied Media Cabinet
Field Supplied Filter
40 - 70
(22 - 39)
40 - 70
(22 - 39)
40 - 70
(22 - 39)
KGAWF1506UFR
925SA
Electrical Data 30040 42060 48080 60080 60100 66120
Input Voltage
Operating Voltage Range Min-Max 104-127
Maximum Input Amps Amps 7.4 9.1 9.1 11.6 11.7 11.7
Unit Ampacity Amps 10.3 12.4 12.4 15.5 15.6 15.6
Minimum Wire Size
Maximum Wire Length
@ Minimum Wire Size
Maximum Fuse/Ckt Bkr
(Time-Delay Type Recommended)
Transformer Capacity
(24vac output)
External Control Power
Available
Controls 30040 42060 48080 60080 60100 66120
Gas Connection Size 1/2" - NPT
Burners (Monoport) 2 3 4 4 5 6
Gas Valve (Redundant)
Minimum Inlet Gas pressure (in. wc) 4.5
Maximum Inlet Gas pressure (in. wc) 13.6
Gas Conversion Kit - Natural to Propane KGANP50011SP
Gas Conversion Kit - Propane to Natural KGAPN42011SP
Manufactured (Mobile) Home Kit KGAMH0601KIT
Ignition Device Silicon Nitride
Limit Control 165 180 170 200 180 160
Heating Blower Control (Heating Off-Delay) Adjustable: 90, 120, 150, 180 seconds
Cooling Blower Control (Time Delay Relay) 90 seconds
Communication System none
Thermostat Connections Com 24V, R, W, G, Y/Y2, DHUM, Y1
Accessory Connections EAC (115vac); HUM (24vac); 1-stg AC (via Y/Y2)
Volts-Hertz-
Phase
AWG 14 14 14 12 12 12
Feet 36 30 30 37 36 36
(M) (11.0) (9.1) (9.1) (11.3) (11.0) (11.0)
Amps 15 15 15 20 20 20
Heating 27.9 VA
Cooling 34.6 VA
Manufac-
turer
115-60-1
40 VA
White Rogers
3
MODEL NUMBER NOMENCLATURE
91 - Legacy
92 - Preferred
98 - Evolution
925SA
1 - 2
Family/Tier
92
3
Base Eff.
5
0 --- 90 AFUE
3 --- 93 AFUE
5 --- 95 AFUE
6 --- 96 AFUE
7 --- 97 AFUE
MANUAL RESET
ROLLOUT SWITCH
OPERATING INSTRUCTIONS
NOT SHOWN (LOCATED ON
MAIN FURNACE DOOR, SEE
OPERATING INSTRUCTIONS
INSIDE DOOR FIGURE).
ELECTRICAL JUNCTION
BOX (IF REQUIRED,
LOCATION MAY VARY)
4
Htg. Stages
S
S - Single Stage
T - Two Stage
M - Modulating
FLAME
SENSOR
GAS VALVE
5
Major Series
A
Major Series
6 - 7
Clg. Cap.
30
24 - 800 CFM
30 - 1000 CFM
36 - 1200 CFM
42 - 1400 CFM
48 - 1600 CFM
54 - 1800 CFM
60 - 2000 CFM
66 - 2200 CFM
(@ 0.5” ESP)
Not all familes have these models.
8 - 10
Htg. Cap.
040
040=40,000 BTU
060=60,000 BTU
080=80,000 BTU
100=100,000 BTU
120=120,000 BTU
11
Motor
E
S - Standard
E - Energy Efficient
V - Variable Speed
FURNACE COMPONENTS
HOT SURFACE
GAS BURNER
IGNITER
MANUAL RESET
ROLLOUT SWITCH
12 - 13
Width
14
14 - 14.2”
17 - 17.5”
21 - 21.0”
24 - 24.5”
Voltage
Voltage
14
A
L - Low NOx
MAIN LIMIT SWITCH
(BEHIND GAS VALVE)
INDUCER MOTOR
ASSEMBLY
15
Features
--
16
Minor Series
A
A11165
BLOWER DOOR
SAFETY SWITCH
FURNACE
CONTROL
BOARD
RATING PLATE NOT SHOWN
(LOCATED ON BLOWER DOOR)
REPRESENTATIVE DRAWING ONLY, SOME MODELS MAY VARY IN APPEARANCE.
4
MEDIA CABINET
BLOWER AND
MOTOR
CAPACITOR/
POWER CHOKE
(IF USED)
A11408
ACCESSORIES
Vent Kit - Through the Cabinet
Vent Terminal - Concentric
Vent Terminal Bracket
2-in.
3-in.
2-in.
3-in.
Condensate Drainage Accessories
Venting Accessories
Freeze Protect Kit - Heat Patch for Drain Trap
CPVC to PVC Drain Adapter - 1/2-in. CPVC to 3/4-in. PVC
Horizontal Trap Grommet for Direct Vent Applications
Freeze Protect Kit - Heat Tape
Condensate Neutralizer Kit
Ductwork Adapter Accessories
Furnace Base Kit for Combustible Floors
Coil Adapters Kits - Painted
Return Air Base (Upflow applications) - Painted
IAQ Device Duct Adapters (side return) - Painted
No Offset
Single Offsett
Double Offset
14.2-in. wide
17.5-in. wide
21-in. wide
24.5-in. wide
20-in IAQ to 16-in side return
24-in IAQ to 16-in side return
Gas Conversion Accessories
Mfg Home Kit - Single-stage
Gas Cnv Kit - Nat to LP; Single-stage
Gas Cnv Kit - LP to Nat; Single-stage
Gas Orifice Kit
#42 Natural Gas
#43 Natural Gas
#44 Natural Gas
#45 Natural Gas
#46 Natural Gas
#47 Natural Gas
#48 Natural Gas
#54 LP
#55 LP
#56 LP
1.25 mm LP
1.30 mm LP
Control Accessories
Twinning Kit
Zone Perfect Plus: 8-Zone System Kit
Zone Perfect Plus: 4-Zone System Kit
Zone Perfect Plus: 2-Zone System Kit
Programmable Relative Humidity Thermostat
Programmable Thermostat (HP or AC) / (AC only)
ExP® Card for Programmable Thermostats
Non-Programmable Relative Humidity Thermostat
Non-Programmable Thermostat (HP or AC) / (AC only)
IAQ Accessories
Filter Pack (6 pack) - Washable
EZ-Flex Filter
EZ-Flex Filter with End Caps
Cartridge Media Filter
Bryant Preferred Air Purifier
Bryant Preferred Air Purifier Repl. Filter
16 x 25 x 1
24 x 25 x 1
16-in.
20-in.
24-in.
16-in.
20-in.
24-in.
16-in.
20-in.
24.in.
16 x 25
20 x 25
16 x 25
20 x 25
Notes:
1. CSA requires that a termination kit be used. See latest PD for pipe and kit size selection. The qualified installer or agency must use only factory-authorized
kits when modifying these furnaces.
2. Not for use with Concentric Vent Termination Kits.
3. Last 2 digits of Part Number indicate filter size.
4. Last 2 digits of Part Number indicate orifice size.
5. Choose IAQ/filter assembly appropriate for the designed system airflow and static pressure. Use optional IAQ Device Duct Adapters as required.
6. Available from Replacement Components group.
7. Kit coming soon. Expected availability 2Q2012.
Part Number Used With Notes
KGAVT0701CVT See Venting Tables 1
KGAVT0801CVT See Venting Tables 1
KGAVT0101BRA See Venting Tables 1, 2
KGAVT0201BRA See Venting Tables 1, 2
Part Number Used With Notes
KGACK0101HCK All DV Horizontal -
Part Number Used With Notes
KGARP0301B14 14.2" W ide Furnaces 7
KGARP0301B17 17.5" W ide Furnaces 7
KGARP0301B21 21" Wide Furnaces 7
KGARP0301B24 24.5" W ide Furnaces 7
KGAAD0101MEC 20"x25" IAQ Devices 7
KGAAD0201MEC 24"x25" IAQ Devices 7
Part Number Used With Notes
KGAMH0601KIT All, except 140k -
KGAHA0150N42 All 4, 6
KGAHA0250N43 All 4, 6
KGAHA0650P54 All 4, 6
KGAHA0850P56 All 4, 6
KGAHA5750125 All 4, 6
KGAHA5750130 All 4, 6
A84N0561AHAGK
Part Number Used With Notes
KGATW0701HSI
6T
42060, 48080, 60080,
48100, 60100, 66120
Part Number Used With Notes
EXPXXFIL0016 EZXCAB--1016 3, 5
EXPXXFIL0020 EZXCAB--1020 3, 5
EXPXXFIL0024 EZXCAB--1024 3, 5
EXPXXUNV0016 EZXCAB--1016 3, 5
EXPXXUNV0020 EZXCAB--1020 3, 5
EXPXXUNV0024 EZXCAB--1024 3, 5
FILXXCAR0016 FILCABXL1016 3, 5
FILXXCAR0020 FILCABXL1020 3, 5
FILXXCAR0024 FILCABXL2024 3, 5
PGAPXX1625 Up to 1 600 CFM 5, 7
PGAPXX2025 Up to 2 000 CFM 5, 7
PGAPAXXCAR1625 GAPAAXBB1625 5, 7
PGAPAXXCAR2025 GAPAAXBB2025 5, 7
1llACVB1010CDAGK
7llAPFC1020THAGK
-llAPFC1010THAGK
-llACVP0110DAAGK
6llA1000-809P
-llALLA1020BSAGK
-llALLA1010ADAGK
-llALLA1020ADAGK
-llALLA1030ADAGK
-llAPS11005PNAGK
-llAPS11024NPAGK
4llA44N0530AHAGK
4llA54N0540AHAGK
4llA64N0550AHAGK
4llA74N0551AHAGK
4ll
4llA55P0570AHAGK
-
-llAB-10TIK8BBENOZ
-llAB-10TIK4BBENOZ
-llAB-10TIK2BBENOZ
-llAA-10HRP-6T
-llA10CAP-6T/10PHP-6T
-llAPXE-
-llAA-10HRN-6T
-llA10CAN-6T/10PHN-6T
5llARFU6031FWAGK
5llARFU6051FWAGK
925SA
5
Loading...