Bryant 912SA48080S17, 912SA30040S14, 912SA30060S14, 912SA42060S17, 912SA60080S21 Product Data
...
912SA 92.1 AFUE
LEGACYt LINE SINGLE--STAGE
4--WAY MULTIPOISE
CONDENSING GAS FURNACE
Product Data
A11264
The 912S Multipoise Condensing Gas Furnace is part of the
Legacyt Line product offering. Sporting a PSC blower motor
and an Annual Fuel Utilization Efficiency (AFUE) of 92.1%, this
single-stage gas furnace provides efficient comfort for
homeowners. This Legacy Line Gas Furnace also features 4-way
multipoise installation flexibility, and is available in eight model
sizes. The 912S can be vented for direct vent/two-pipe, ventilated
combustion air, or single-pipe applications. A BryantR Air
Conditioner or Heat Pump can be used to form a complete system.
All units meet California Air Quality Management District
emission requirements. These furnaces are approved for
Manufactured Housing (Mobile Home) applications. All sizes are
design certified in Canada.
STANDARD FEATURES
S 4-way multipoise design for upflow, downflow or horizontal
installation.
S Optional through-the-cabinet downflow venting.
S Installation flexibility with a 360-degree rotating elbow.
S Ideal condensing furnace height 35” cabinet: short enough for
taller coils, but still allows enough room for service.
S Silicon Nitride Perfect Lightt Hot Surface Igniter.
S Aluminized-steel primary heat exchanger.
S Stainless-steel condensing secondary heat exchanger.
S High-quality corrosion-resistant prepainted steel cabinet with
hemmed edges for safety.
S Factory-configured ready for upflow applications.
S Direct-vent/sealed combustion, single-pipe venting or ventilated
combustion air.
S PSC blower motor, single-speed inducer motor, and single-stage
gas valve.
S Self-diagnostics
S Approved for Twinning applications (42060 through 60120
sizes, only).
S Propane convertible(See accessory list).
S Approved for Manufactured Housing/Mobile Home applications
with MH accessory kit.
S Convenient Air Purifier and Humidifier connections.
S Residential installations may be eligible for consumer financing
through the Retail Credit Program.
S Certified to leak 2% or less of nominal air conditioning CFM
delivered when pressurized to 1-inch water column with all
present air inlets, air outlets, and condensate drain port(s) are
sealed.
LIMITED WARRANTY*
S 10 year parts and 20--year heat exchanger limited warranty to the
original purchaser upon timely registration.
S Limited warranty period is five years for parts and twenty years
for the heat exchanger if not registered within 90 days of
installation.{
* For owner occupied, residential applications.
{Jurisdictions where warranty benefits cannot be conditioned on registra-
tion will receive registered limited warranty ben efits.
Use of the AHRI Certified TM Mark indicates a
manufacturer’s participation in the program. For
verification of certification for individual products,
go to www.ahridirectory.org.
1
CERTIFIED
CASING
SAP ORDERING NO.
912SA30040S14 35 29.5 14.2 39,000 92.1% 820 0.10 625-905 1/2 - 4 123
912SA30060S14 35 29.5 14.2 58,000 92.1% 840 0.12 675-1130 1/2 - 4 127
912SA42060S17 35 29.5 17.5 58,000 92.1% 980 0.12 650-1420 1/2 - 5 144
912SA48080S17 35 29.5 17.5 78,000 92.1% 1040 0.15 810-1600 3/4 - 5 154
912SA60080S21 35 29.5 21.0 78,000 92.1% 1500 0.15 1225-2025 3/4 - 5 162
912SA42100S21 35 29.5 21.0 97,000 92.1% 1565 0.20 695-1565 3/4 - 5 169
912SA60100S21 35 29.5 21.0 97,000 92.1% 1520 0.20 1225-2145 3/4 - 5 169
912SA60120S24 35 29.5 24.5 117,000 92.1% 2065 0.20 1245-2065 3/4 - 5 186
† Capacity in accordance with DOE test procedures. See rating plate.
‡ Heating CFM at factory default blower motor heating tap settings.
ESP --- External Static Pressure
DIMENSIONS (IN.)
H D W (BTUH) AFUE CFM‡
RATED HEATING
OUTPUT†
HEATING AIRFLOW
Heating
ESP
(in. WC)
COOLING CFM
@ 0.5 ESP
(in. WC)
MOTOR HP-SPEED
APPROX SHIP
WEIGHT (LB)
912S FEATURES AND BENEFITS
HYBRID HEATR Dual Fuel system — This system can provide
more control over your monthly energy bills by automatically
selecting the most economical method of heating. With HYBRID
HEAT, our system automatically switches between the gas furnace
and the single--stage electric heat pump as outside temperatures
change to maintain greater efficiency and comfort than with any
912SA
traditional single-source heating system. The heat pump also
delivers high-efficiency cooling in the summer.
Power Heatt Igniter — Bryant’s unique SiN igniter is not only
physically robust but it is also electrically robust. It is capable of
running at line voltage and does not require complex voltage
regulators as do other brands. This unique feature further enhances
the gas furnace reliability and continues Bryant’s tradition of
technology leadership and innovation in providing a reliable and
durable product.
Reliable Heat Exchanger Design — The aluminized steel,
clamshell primary heat exchanger was reengineered to achieve
greater efficiency out of a smaller size. The first two passes of the
heat exchanger are based on the current 80% product, a design
with more than ten years of field-proven performance and success.
These innovations, paired with the continuation of a crimped,
no-weld seam create an efficient, robust design for this essential
component.
The condensing heat exchanger, a stainless steel fin and tube
design, is positioned in the furnace to extract additional heat.
Stainless steel coupling box componentry between heat exchangers
has exceptional corrosion resistance in both natural gas and
propane applications.
4-Way Multipoise Design — One model for all applications –
there is no need to stock special downflow or horizontal models
when one unit will do it all. The new heat exchanger design allows
these units to achieve the certified AFUE in all positions.
Direct or Single-pipe Venting, or Optional Ventilated
Combustion Air — This furnace can be installed as a 2-pipe
(Direct Vent) furnace, in an optional ventilated combustion air
application, or in single-pipe, non-direct vent applications. This
provides added flexibility to meet diverse installation needs.
Sealed Combustion System — This furnace brings in combustion
air from outside the furnace, which results in especially quiet
operation. By sealing the entire combustion vestibule, the entire
furnace can be made quieter, not just the burners.
Monoport Burners — The burners are specially designed and
finely tuned for smooth, quiet combustion and economical
operation.
Bottom Closure — Factory--installed for side return; easily
removable for bottom return. The multi-use bottom closure can
also serve for roll-out protection in horizontal applications, and act
as the bottom closure for the optional return air base accessory.
Blower Access Panel Switch — Automatically shuts off 115-v
power to furnace whenever blower access panel is opened.
Quality Registration — Our furnaces are engineered and
manufactured under an ISO 9001 registered quality system.
Certifications — This furnace is CSA (AGA and CGA) design
certified for use with natural and propane gases. The furnace is
factory--shipped for use with natural gas. A CSA listed gas
conversion kit is required to convert furnace for use with propane
gas. The efficiency is GAMA efficiency rating certified. This
furnace meets California Air Quality Management District
emission requirements.
2
SPECIFICATIONS
Heating Capacity and Efficiency 30040 30060 42060 48080 60080 42100 60100 60120
Input High Heat (BTUH) 40,000 60,000 60,000 80,000 80,000 100,000 100,000 120,000
Output High Heat (BTUH) 39,000 58,000 58,000 78,000 78,000 97,000 97,000 117,000
Efficiency AFUE % (ICS) 92.1 92.1 92.1 92.1 92.1 92.1 92.1 92.1
Certified Temperature
Rise Range ºF (ºC)
Airflow Capacity and Blower Data 30040 30060 42060 48080 60080 42100 60100 60120
Certified External Static
Pressure (in. w.c.)
Airflow Delivery
@ Rated ESP (CFM)
Cooling Capacity (tons)
@ 400, 350 CFM/ton
Direct-Drive Motor Type Permanent Split Capacitor (PSC)
Direct-Drive Motor HP 0.5 0.5 0.5 0.75 0.75 0.75 0.75 0.75
Motor Full Load Amps 6.2 6.2 6.8 7.9 13.8 6.5 13.8 14.1
RPM Range 500 - 1150
Speed Selections 4 4 5 5 5 5 5 5
Blower Wheel Dia x Width in. 11 x 7 11 x 7 11 x 8 11 x 8 11 x 10 11 x 10 11 x 10 11 x 11
Air Filtration System Field Supplied
Filter Used for Certified Watt Data KGAWF1606UFR KGAWF1306UFR KGAWF1406UFR
Electrical Data 30040 30060 42060 48080 60080 42100 60100 60120
Input Voltage Volts-Hertz-Phase 115-60-1
Operating Voltage Range Min-Max 104-127
Maximum Input Amps Amps 6.8 7.0 8.4 9.6 14.5 7.6 14.6 14.9
Unit Ampacity Amps 9.5 9.7 11.5 13.0 19.1 10.4 19.2 19.6
Minimum Wire Size AWG 14 14 14 14 12 14 12 12
Maximum Wire Length
@ Minimum Wire Size
Maximum Fuse/Ckt Bkr
(Time-Delay Type Recommended)
Transformer Capacity (24vac output) 40 VA
External Control Power Available
High Heat
Heating 0.10 0.12 0.12 0.15 0.15 0.20 0.20 0.20
Cooling 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
High Heat 820 840 980 1040 1500 1565 1520 2210
Cooling 905 1130 1420 1600 2025 1565 2145 2065
CFM/ton 2 2.5 3.5 4 5 4 5 5
CFM/ton 2.5 3 4 4.5 5.5 4.5 6 6
Heating 27.9 VA
Cooling 34.6 VA
40 - 70
(22 - 39)
Feet 39 38 32 28 30 35 29 29
(M) (11.9) (11.6) (9.8) (8.5) (9.1) (10.7) (8.8) (8.8)
Amps 15 15 15 15 20 15 20 20
40 - 70
(22 - 39)
40 - 70
(22 - 39)
40 - 70
(22 - 39)
40 - 70
(22 - 39)
40 - 70
(22 - 39)
40 - 70
(22 - 39)
40 - 70
(22 - 39)
KGAWF1506UFR
912SA
Controls 30040 30060 42060 48080 60080 42100 60100 60120
Gas Connection Size 1/2" - NPT
Burners (Monoport) 2 3 3 4 4 5 5 6
Gas Valve (Redundant) Manufacturer White Rogers
Minimum Inlet Gas pressure (in. wc) 4.5
Maximum Inlet Gas pressure (in. wc) 13.6
Gas Conversion Kit - Natural to Propane KGANP50011SP
Gas Conversion Kit - Propane to Natural KGAPN42011SP
Manufactured (Mobile) Home Kit KGAMH0601KIT
Ignition Device Silicon Nitride
Limit Control 165 165 180 170 200 180 180 160
Heating Blower Control (Heating Off-Delay) Adjustable: 90, 120, 150, 180 seconds
Cooling Blower Control (Time Delay Relay) 90 seconds
Communication System none
Thermostat Connections Com24V,R,W,G,Y
Accessory Connections EAC (115vac); HUM (24vac)
3
1 - 2
Family/Tier
91
91 - Legacy
92 - Preferred
98 - Evolution
3
Base Eff.
2
0 --- 90 AFUE
2 --- 92 AFUE
3 --- 93 AFUE
5 --- 95 AFUE
6 --- 96 AFUE
7 --- 97 AFUE
4
Htg. Stages
S
S - Single Stage
T - Two Stage
M - Modulating
MODEL NUMBER NOMENCLATURE
5
Major Series
A
Major Series
6 - 7
Clg. Cap.
30
24 - 800 CFM
30 - 1000 CFM
36 - 1200 CFM
42 - 1400 CFM
48 - 1600 CFM
54 - 1800 CFM
60 - 2000 CFM
66 - 2200 CFM
(@ 0.5” ESP)
Not all familes have these models.
8 - 10
Htg. Cap.
040
040=40,000 BTU
060=60,000 BTU
080=80,000 BTU
100=100,000 BTU
120=120,000 BTU
11
Motor
S
S - Standard
E - Energy Efficient
V - Variable Speed
14 - 14.2”
17 - 17.5”
21 - 21.0”
24 - 24.5”
12 - 13
Width
14
Voltage
Voltage
14
A
15
Features
--
L - Low NOx
16
Minor Series
A
A12043
912SA
FLAME
SENSOR
MANUAL RESET
ROLLOUT SWITCH
GAS VALVE
OPERATING INSTRUCTIONS
NOT SHOWN (LOCATED ON
MAIN FURNACE DOOR, SEE
OPERATING INSTRUCTIONS
INSIDE DOOR FIGURE).
ELECTRICAL JUNCTION
BOX (IF REQUIRED,
LOCATION MAY VARY)
BLOWER DOOR
SAFETY SWITCH
FURNACE COMPONENTS
HOT SURFACE
GAS BURNER
IGNITER
MANUAL RESET
ROLLOUT SWITCH
MAIN LIMIT SWITCH
(BEHIND GAS VALVE)
INDUCER MOTOR
ASSEMBLY
MEDIA CABINET
FURNACE
CONTROL
BOARD
RATING PLATE NOT SHOWN
(LOCATED ON BLOWER DOOR)
REPRESENTATIVE DRAWING ONLY, SOME MODELS MAY VARY IN APPEARANCE.
BLOWER AND
MOTOR
CAPACITOR/
POWER CHOKE
(IF USED)
A11408
4
ACCESSORIES
Vent Kit - Through the Cabinet
Vent Terminal - Concentric
Vent Terminal Bracket
2-in.
3-in.
2-in.
3-in.
Condensate Drainage Accessories
Venting Accessories
Freeze Protect Kit - Heat Patch for Drain Trap
CPVC to PVC Drain Adapter - 1/2-in. CPVC to 3/4-in. PVC
Freeze Protect Kit - Heat Tape
Horizontal Trap Grommet for Direct Vent Applications
Condensate Neutralizer Kit
Ductwork Adapter Accessories
Furnace Base Kit for Combustible Floors
Coil Adapters Kits - Painted
Return Air Base (Upflow applications) - Painted
IAQ Device Duct Adapters (side return) - Painted
No Offset
Single Offsett
Double Offset
14.2-in. wide
17.5-in. wide
21-in. wide
24.5-in. wide
20-in IAQ to 16-in side return
24-in IAQ to 16-in side return
Gas Conversion Accessories
Mfg Home K it - Single-s tage
Gas Cnv Kit - Nat to LP; Single-stage
Gas Cnv Kit - LP to Nat; Single-stage
Gas Orifice Kit
#42 Natural Gas
#43 Natural Gas
#44 Natural Gas
#45 Natural Gas
#46 Natural Gas
#47 Natural Gas
#48 Natural Gas
#54 LP
#55 LP
#56 LP
1.25 mm LP
1.30 mm LP
Control Accessories
Twinning Kit
Zone Perfect: 3-Zone System (HP only)
Zone Perfect: 3-Zone System (AC only)
Programmable Thermostat (HP or AC) / (AC only)
Non-Programmable Thermostat (HP or AC) / (AC only)
Non-Programmable Standard Screen Thermostat (HP or AC) / (AC only)
Programmable Thermostat (HP or AC) / (AC only)
Non-Programmable Thermostat (HP or AC) / (AC only)
IAQ Accessories
52X61sretliF"1rofnruteRediS-kcaRretliF
14.2-in. wide
Filter Rack - Bottom Return for 1" Filters
Filter Pack (6 pack) - Washable
EZ-Flex Filter
EZ-Flex Filter with E nd Caps
Cartridge Media Filter
EZ Flex Cabinet - Side or Bottom Return for 4" Filters
(Use FILCAB for 24" furnaces)
17.5-in. wide
21-in. wide
24.5-in. wide
16 x 25 x 1
24 x 25 x 1
16-in.
20-in.
24-in.
16-in.
20-in.
24-in.
16-in.
20-in.
24.in.
16-in.
20-in.
24-in.
Notes:
1. CSA requires that a termination kit be used. See latest PD for pipe and kit size selection. The qualified installer or agency must use only
factory-authorized kits when modifying these furnaces.
2. Not for use with Concentric Vent Termination Kits.
3. Las t 2 digits of Part Number indicate filter size.
4. Las t 2 digits of Part Number indicate orifice size.
5. Choose IAQ/filter assembly appropriate for the designed system airflow and static pressure. Use optional IAQ Device Duct Adapters as required.
6. Av ailable from Replacement Com ponents group.
7. Kit coming soon. Expected availability 2Q2012.
Part Number Used With Notes
KGADC0101BVC All 1
KGAVT0701CVT See Venting Tables 1
KGAVT0801CVT See Venting Tables 1
KGAVT0101BRA See Venting Tables 1, 2
KGAVT0201BRA See Venting Tables 1, 2
Part Number Used With Notes
KGAHT0201CFP All 7
KGAHT0101CFP All KGAAD0110PVC All KGACK0101HCK All DV Horizontal -
P908-0001 All 6
Part Number Used With Notes
KGASB0201ALL All -
KGADA0101ALL All -
KGADA0201ALL All -
KGADA0301ALL All -
KGARP0301B14 14.2" Wide Furnaces 7
KGARP0301B17 17.5" Wide Furnaces 7
KGARP0301B21 21" W ide Furnaces 7
KGARP0301B24 24.5" Wide Furnaces 7
KGAAD0101MEC 20"x25" IAQ Devices 7
KGAAD0201MEC 24"x25" IAQ Devices 7
Part Number Used With Notes
KGAMH0601KIT All, except 140k -
KGANP50011SP All -
KGAPN42011SP All -
KGAHA0150N42 All 4, 6
KGAHA0250N43 All 4, 6
KGAHA0350N44 All 4
KGAHA0450N45 All 4
KGAHA0550N46 All 4
KGAHA1550N47 All 4
KGAHA1650N48 All 4
KGAHA0650P54 All 4, 6
KGAHA0750P55 All 4
KGAHA0850P56 All 4, 6
KGAHA5750125 All 4, 6
KGAHA5750130 All 4, 6
Part Number Used With Notes
KGATW0701HSI
ZONEBB3ZHP01 All ZONEBB3ZAC01 All -
T2-PHP01 / T2-PAC01 All T2-NHP01 / T2-NAC01 All -
T2SNHP01 / T2SNAC01 All -
T1-PHP01 / T1-PAC01 All T1-NHP01 / T1-NAC01 All -
Part Number Used With Notes
KGAFR0801SRE All 5
KGBFR0401B14 14.2" Wide Furnaces 3, 5
KGBFR0501B17 17.5" Wide Furnaces 3, 5
KGBFR0601B21 21" W ide Furnaces 3, 5
KGAFR0701B24 24.5" Wide Furnaces 3, 5
KGAWF1306UFR All 5
KGAWF1506UFR All 5
EXPXXFIL0016 EZXCAB--1016 3, 5
EXPXXFIL0020 EZXCAB--1020 3, 5
EXPXXFIL0024 EZXCAB--1024 3, 5
EXPXXUNV0016 EZXCAB--1016 3, 5
EXPXXUNV0020 EZXCAB--1020 3, 5
EXPXXUNV0024 EZXCAB--1024 3, 5
FILXXCAR0016 FILCABXL1016 3, 5
FILXXCAR0020 FILCABXL1020 3, 5
FILXXCAR0024 FILCABXL2024 3, 5
EZXCABBB1016 All 5
EZXCABBB1020 All 5
FILCABXL0024 All 5
42060, 48080, 60080,
42100, 60100, 60120
912SA
-
5
Loading...