Bryan Boilers B-26S-D, HFS-15-100-100-D User Manual
Form No. 4002
(Rev. 7/08)
BR YAN
®
STEAM
Boiler Accessories
Improved performance and
longevity for commercial
and industrial boilers
Since 1916
Condensate Transfer Stations
6 to 60 GPM pump capacities
10 to 60 PSI discharge pressures
8 to 50 gallon receivers
In most heating systems, condensate, and sometimes
steam, is trapped out of heaters, kettles, hot presses,
molds, absorbers, and other equipment and drained to
a return unit having given up some of its heat in the
process. If a trap malfunctions, the condensate can be
passed to the return unit at a much higher temperature
causing the return unit to fail. When using Bryan
Condensate Transfer Stations as the return unit, this
problem is overcome because they are designed to
eliminate cavitation at high temperatures. In addition,
Bryan Condensate Transfer Stations are designed to
handle the higher load placed on them during cold
starts and are supplied with reliable pumps that are
designed to handle hotter water and develop higher
pressures at lower speeds.
Bryan Condensate Transfer Stations are ideal for
remote or non-accessible locations where unattended,
dependable performance is essential.
The Bryan horizontal boiler feed system is a conventional stand-mounted feed system that is completely
packaged, but is also flexible to meet each customers
specific needs.
Features
• Atmospheric tank built from heavy ¼" minimum
steel thickness
• Tank sizes from 50 to 500 gallons
• Factory packaged for ease of installation
• Packages based on 1 gallon storage per
1 BHP minimum
• Available with single or multiple pump packages
• Pumps mounted in front of tank for ease of
maintenance and replacement
• TEFC pump motors and NEMA 12 enclosures
are standard
• Heavy duty stand with pump platform
• Integral steam preheater optional
Horizontal Boiler Feed Systems
Capacities to 500 boiler HP
15 through 250 PSI boilers
Save energy and reduce
2
Model B-26S-D
Model HFS-15-100-100-D
Features
• Atmospheric tank built from heavy ¼" minimum
steel thickness
• Tank sizes from 20 to 80 gallons
• Factory packaged for ease of installation
• Packages based on 1 gallon storage per
1 BHP minimum
• Available with simplex and duplex
pump packages
• Top mounted pumps for ease of maintenance
and replacement
• TEFC pump motors are standard
• All units designed to fit through standard
36" doorway
The Bryan compact boiler feed system requires a minimal amount of boiler room space while providing
many of the same rugged features as competitive
stand-mounted feed systems.
Features
• Atmospheric tank with dished heads
• Tank sizes from 60-1000 gallons
standard. Larger sizes available upon request.
• Factory packaged for ease of installation
• Packages based on 1 gallon storage per
1 BHP minimum
• Available with multiple pumps and different
electrical packages
• Various pump manufacturers available
mounted and wired
• TEFC pump motors and NEMA 12
enclosures are standard
• Heavy duty stand with pump platform
• Integral steam preheater optional
The Bryan horizontal transfer system is also used as a
boiler feed system when dished heads are preferred or
more than 500 gallons is needed for storage.
Horizontal Transfer Systems
Capacities to 1000 boiler HP
15 through 250 PSI boilers
Compact Boiler Feed Systems
Capacities from 20 to 80 boiler HP
15 through 150 PSI boilers
operating cost by re-using condensate
3
Model CFS-100-80-80-D
Model HTS-150-100-100-D
Loading...