How it Works
browning
Loading...
CYNERGY
Owner's Manual
23 pgs2.11 Mb0
User Guide
18 pgs2.53 Mb0
User Manual [fr]
21 pgs30.58 Mb0

browning cynergy User Guide

The Best There Is
™
CYNERGY
™
SHOTGUN
OWNER’S MANUAL
YOU ARE RESPONSIBLE FOR FIREARMS SAFETY
As a gun owner, you accept a set of demanding responsibilities. How seriously you take these responsibilities can be the difference between life and death.
There is no excuse for careless or abusive handling of any firearm. At all times handle your shotgun and any other firearm with intense respect for its power and potential danger.
PLEASE READ AND UNDERSTAND ALL OF THE CAUTIONS, PROPER HANDLING PROCEDURES AND INSTRUCTIONS OUTLINED IN THIS BOOKLET BEFORE USING YOUR NEW FIREARM.
1
ALWAYS KEEP THE MUZZLE OF YOUR SHOTGUN POINTED IN A SAFE DIRECTION
Never point any firearm at anything you do not intend to shoot. Be extremely alert and aware of all persons and property within the range of your ammunition.
2
NEVER RELY TOTALLY ON YOUR SHOTGUN’S MECHANICAL “SAFETY” DEVICE.
sear block mechanism, hammer block mechanism or firing pin block mechanism. These mechanical devices are designed to place your gun in a SAFER status. No guarantee can be made that the gun will not fire even if the “safety” is in the “on safe” position. The Cynergy has a thumb-operated top tang “safety” which blocks the gun’s trigger. See “Operation of the Safety” on page 9 for instructions on operation of this gun’s “safety. ”
LIKE ANY MECHANICAL DEVICE, A “SAFETY” CAN SOMETIMES FAIL; IT CAN BE JARRED OR INADVERTENTLY MANIPULATED INTO AN UNSAFE CONDITION.
handling and are no excuse for pointing your shotgun’s muzzle in an unsafe direction.
While it is a good idea to “test” your shotgun’s mechanical “safeties” periodically for proper function,
YOUR SHOTGUN IS LOADED OR POINTED IN AN UNSAFE DIRECTION.
2
even though you are certain the shotgun is unloaded.
The word “safety” describes a gun’s trigger block mechanism,
Mechanical “safeties” merely aid safe gun
NEVER TEST THE “SAFETY” WHILE
Safe gun handling does not stop with your gun’s mechanical “safety” devices—it starts there. Always treat this shotgun with the respect due a loaded, ready-to-fire firearm.
3
WHENEVER YOU HANDLE A FIREARM OR HAND IT TO SOMEONE, ALWAYS OPEN THE ACTION IMMEDIATELY. VISUALLY CHECK YOUR SHOTGUN’S CHAMBERS.
Make certain that they do not inadvertently contain any ammunition. Always keep the chambers empty and the “safety” in the “on safe” position unless shooting is imminent.
4
DO NOT TRANSPORT ANY LOADED FIREARM.
Keep all firearms unloaded during transport whether stored in a holster, gun case, scabbard or other container.
5
HUNTING FROM ELEVATED SURFACES SUCH AS TREE STANDS IS DANGEROUS.
Doing so may increase the risk of handling a firearm. The following rules should always be observed by you and those you hunt with: Always make certain that the stand being used is safe and stable. Always make certain that your firearm is unloaded when it is being taken up and down from the stand. Always make certain that your firearm is not dropped from the stand, or dropped while it is being taken up or down from the stand. Remember, a loaded firearm may discharge when dropped.
6
BEWARE OF BARREL OBSTRUCTIONS.
For the safety of both your gun and yourself. Mud, snow and an infinite variety of other objects may inadvertently lodge in a barrel bore. It takes only one small obstruction to cause dangerously increased pressures that may damage your gun and cause injury to yourself and to others.
BEFORE CHECKING FOR A BARREL OBSTRUCTION, BE CERTAIN NO LIVE ROUNDS ARE IN THE CHAMBERS. PLACE THE “SAFETY” IN THE “ON SAFE” POSITION.
After assuring yourself that the shotgun is completely empty, again, open the action and look through the barrels to be sure they are clear of any obstruction. If an obstruction is seen, no matter how small it may be, clean the bore with a cleaning rod and patch as described in “Cleaning Suggestions” on page 20. Before the first firing, clean the bore with a cleaning rod and patch, and wipe away any anti-rust compounds in the action/chamber areas.
3
7
ALWAYS UNLOAD YOUR SHOTGUN WHEN NOT IN USE.
precaution, it is preferable to disassemble your gun for storage. Store your gun and ammunition separately–well beyond the reach of children. Take all safeguards to ensure your shotgun does not become available to untrained, inexperienced or unwelcome hands.
8
USE THE PROPER AMMUNITION.
The barrel and action of this shotgun have been made with substantial safety margins over the pressures developed by established American commercial loads. Nevertheless, Browning can assume no responsibility for incidents which occur through the use of shotshells of nonstandard dimensions which develop pressures in excess of commercially available ammunition which has been loaded in accordance with standards established by Sporting Arms and Ammunition Manufacturer’s Institute (SAAMI).
BE ALERT TO THE SIGNS OF AMMUNITION MALFUNCTION. IF YOU DETECT AN OFF SOUND OR LIGHT RECOIL WHEN A SHELL IS FIRED, DO NOT LOAD ANOTHER SHELL INTO THE CHAMBER.
Open the action and remove all shells from the chambers. Glance down the barrels to make sure that a wad or other obstruction does not remain in the barrel. Completely clear the barrel before loading and firing again. Failure to follow these instructions can cause extensive damage to your gun and possible serious injury to yourself and others.
Make sure of adequate ventilation in the area that you discharge a firearm. Wash hands thoroughly after exposure to ammunition or cleaning a firearm.
Lead exposure can be obtained from discharging firearms in poorly ventilated areas, cleaning firearms or handling ammunition. Lead is a substance that has been known to cause birth defects, reproductive harm and other serious injury.
9
NEVER INSERT A SHELL OF THE INCORRECT GAUGE IN ANY SHOTGUN.
The gauge of your shotgun is marked on the barrel. Store all shotshells of different gauges in completely separate and well-marked containers. Never store shells of mixed gauges in a common container or in your pockets.
4 5
As a safety
EXAMINE EVERY SHELL YOU PUT IN YOUR GUN. DO NOT PUT A 20 GAUGE SHELL IN A 12 GAUGE GUN. DO NOT PUT A 28 GAUGE SHELL IN A 20 GAUGE GUN. DO NOT PUT A .410 BORE SHELL IN A 28 GAUGE GUN. NEVER PUT METALLIC CARTRIDGES OF ANY KIND IN A SHOTGUN. SPECIFICALLY, NEVER PUT CENTERFIRE RIFLE OR PISTOL CARTRIDGES IN A SHOTGUN CHAMBERED FOR .410 BORE. FAILURE TO FOLLOW THIS WARNING MAY RESULT IN SERIOUS INJURY TO YOU AND TO OTHERS.
The most certain way to bulge or rupture a barrel is to drop a smaller gauge shell into a larger gauge chamber. The smaller gauge shell will not fall completely through the barrel; its rim is caught by the front of a larger gauge chamber or at the larger gauge’s choke.Your gun will misfire (with the chamber appearing to be empty). It is then possible to load the correct gauge shell behind the smaller gauge shell. If the correct gauge shell is then fired, the result may be a so-called “12-20, 20-28 or 28-.410 burst” which can cause extensive damage to your gun and possible serious injury to you and to others.
USE SHELLS OF THE CORRECT LENGTH.
10
a barrel with a 2
3
⁄4" or 21⁄2" chamber, or 31⁄2" shells in a barrel with a
Do not use 3" or 31⁄2" shells in
3" chamber. Doing so can result in a build-up of dangerously high pressures that may damage your gun and possibly cause serious injury to yourself or others. The size of the chamber is inscribed on the side of the barrel.
DO NOT SNAP THE FIRING PIN ON AN EMPTY CHAMBER — THE
11
CHAMBER MAY NOT BE EMPTY!
Treat every gun with the respect due
a loaded gun, even though you are certain the gun is unloaded.
KEEP YOUR FINGER AWAY FROM THE TRIGGER WHILE UNLOADING,
12
LOADING OR UNTIL YOU ARE READY TO SHOOT.
13
BE SURE OF YOUR TARGET AND BACKSTOP,
particularly during low light periods. Know the range of your ammunition. Never shoot at water or hard objects.
ALWAYS UNLOAD YOUR SHOTGUN’S CHAMBERS BEFORE CROSSING A
14
FENCE, CLIMBING A TREE, JUMPING A DITCH OR NEGOTIATING OTHER OBSTACLES.
Never place your shotgun on or against a fence, tree, car
or other similar object.
15
WEAR EYE AND EAR PROTECTION WHEN SHOOTING.
Unpr otected , repeated exposure to gunfire can cause hearing damage. Wear ear protectors (shooting ear plugs or muffs) to guard against such damage. Wear shooting glasses to protect your eyes from flying particles. Always keep a safe distance between the muzzle of your firearm and any persons nearby, as muzzle blast, debris and ejecting shells could inflict serious injury. Also, wear eye protection when disassembling and cleaning your shotgun to prevent the possibility of springs, spring-tensioned parts, solvents or other agents from contacting your eyes.
16
DROPPING A LOADED GUN CAN CAUSE AN ACCIDENTAL DISCHARGE
even with the “safety” in the “on safe” position. Be extremely careful while hunting or during any shooting activity to avoid dropping any firearm.
17
IF YOUR GUN FAILS TO FIRE, KEEP THE MUZZLE POINTED IN A SAFE DIRECTION.
Hold this position for a minimum of 30 seconds. Carefully open the action and remove the shotshell. If the primer is indented, the shell should be disposed of in a way that cannot cause harm. If the primer is not indented, your firearm should be examined by a qualified gunsmith and the cause of the malfunction should be corrected before further use.
18
BE DEFENSIVE AND ON GUARD AGAINST UNSAFE GUN HANDLING AROUND YOU AND OTHERS.
Don’t be timid when it comes to gun safety. If you observe other shooters violating any of these safety precautions, politely suggest safer handling practices.
19
BE CERTAIN YOUR SHOTGUN IS UNLOADED BEFORE CLEANING.
Because so many gun accidents occur when a firearm is being cleaned, special and extreme care should be taken to be sure your gun is unloaded before disassembly, cleaning and reassembly. Keep ammunition away from the cleaning location. Never test the mechanical function of any firearm with live ammunition.
SUPERVISE AND TEACH FIREARMS SAFETY TO ALL MEMBERS OF YOUR
20
FAMILY, ESPECIALLY TO CHILDREN AND NON-SHOOTERS.
Closely supervise newcomers to the shooting sports. Encourage enrollment in hunting/shooting safety courses.
21
NEVER DRINK ALCOHOLIC BEVERAGES OR TAKE ANY TYPE OF DRUGS BEFORE OR DURING SHOOTING.
Your vision and judgement could be dangerously impaired, making your gun handling unsafe to you or to others.
22
READ AND HEED ALL WARNINGS
in this instruction book, on ammunition boxes and with all accessories that you install on your firearm. It is your responsibility to secure the most up-to-date information on the safe handling procedures for your Browning gun. Browning assumes no liability for incidents which occur when unsafe or improper gun accessories or ammunition combinations are used.
23
PRACTICE PERIODIC MAINTENANCE — AVOID UNAUTHORIZED SERVICING.
Your gun is a mechanical device which will not last forever and, as such, is subject to wear and requires periodic inspection, adjustment and service. Browning firearms should be serviced by a Browning recommended service facility or by Browning’s service facility in Arnold, Missouri. Browning cannot assume any responsibility for injuries suffered or caused by unauthorized servicing, alterations or modifications of Browning firearms.
DO NOT, UNDER ANY CIRCUMSTANCES, ALTER THE TRIGGER, SAFETY OR PARTS OF THE FIRING MECHANISM OF THIS OR ANY OTHER FIREARM. FAILURE TO OBEY THIS WARNING MAY RESULT IN INJURY OR DEATH TO YOURSELF OR OTHERS.
BE CAREFUL!
6 7
FIGURE 1A
Buttstock
Safety/Barrel Selector
Top Lever
Rib
Muzzle
Barrel
CYNERGY
Recoil Pad
FIGURE 1B
Recoil Pad
Ejector Cam
Top Lever
Trigger
Forearm Bracket
Trigger
Receiver
Forearm Latch
Receiver
Trigger Guard
Forearm
Front Bead
Forearm
when the trigger is pulled for the second shot. It will not fire both barrels simultaneously. Only one barrel will be fired with each pull of the trigger.
CAUTION:
Once again, the Cynergy shotgun has mechanical triggers. The recoil action of a fired shell in the first barrel is not necessary to set the trigger to fire the round in the second barrel. If you pull the trigger on the first barrel selected and there is no round loaded or there is a misfire, then immediately pulling the trigger again will fire the shell in the second barrel.
Highly skilled techniques of hand-fitting and polishing have been used to accomplish precise fitting of metal parts on this gun. These painstaking operations are necessary to prevent looseness, even after
MonoLock Hinge Forearm Bracket
Barrel
Muzzle
long use. You may consider your new gun to be slightly stiff. This
NOMENCLATURE
In conventional gun terminology the position and movement of gun parts are described as they occur with the gun horizontal and in normal firing position: i.e., the muzzle is forward or in front; the buttstock is rearward or to the rear; the trigger is downward or underneath; the rib is upward or on top. For general parts nomenclature, refer to Figure 1A. For specific parts names related to disassembly, refer to Figure 1B. All figures apply to the 12 gauge Cynergy shotguns.
close fitting, however, assures you of long lasting dependability.
SERIAL NUMBER
The serial number of your Cynergy is found under the top lever. Record this number for future reference.
OPERATION OF THE “SAFETY”
The complete action (both barrels) is put “on safe” by sliding the thumb safety/selector rearward (Figure 2). In the “on safe”
GENERAL OPERATION
The Cynergy shotgun has two separate barrels aligned one over the other. The trigger is a mechanical system. After one barrel has been fired, your trigger shifts itself into position to fire the second barrel
8 9
position an “S”appears directly in front of the safety/selector. The above applies whether the selector is positioned for the “O” (over barrel) or “U” (under barrel) to fire first. To put the gun “off safe” the safety/selector is moved forward (Figure 2A). Whenever you are not
Loading...
+ 12 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use