Browning Command Ops Pro BTC-4P-16 Instruction Manual

PLEASE READ THIS MANUAL BEFORE USE

MODEL BTC-4P-16

I

NSTRUCTION MANUAL

Thank you for purchasing a Browning Trail
Camera. Our trail cameras are constructed
of the finest workmanship and materials
available. As hunters ourselves, we have
designed our products to help you get the
most of your time in the field. We hope
you enjoy scouting game for years to come
with your new Browning Trail Camera.

Our customer service team is here to help
you with any questions you may have
operating or setting up your new trail
camera. Our representatives are available
Monday through Friday from 9am to 5pm CST.

Toll Free Customer Service:

1.888.618.4496
Customer Service email:
[e-mail]

QUICK START GUIDE

STEP 1

Press the battery tray
eject button to release the
battery tray. The tray will
eject about 1/2”. With a
slight pull, the tray will
completely eject. Insert
6 AA Alkaline Batteries
and an SD card into the
camera.

SD Card

Battery Eject

STEP 2

Move the power
switch to the
“ON” position.
Press the MODE
button once to
enter the camera setup mode.Using the
control pad, set the time and date.

STEP 3

Press the MODE button once.Camera will
countdown a 20 second delay and then be
ready to capture images.

Set Date
01/06/18

TABLE OF CONTENTS

Package Contents 1
Batteries and SD cards 1
Camera Diagram 2
Battery Installation 3
Main Screen 4
Time and Date 5
Capture Mode 6
Capture Delay / Picture Size 7
Multi-Shot 8
Temp Units / Info Bar / SD Management 9
Motion Test / Camera Name 10
Timelapse Settings 11
Default Settings / Delete Images 12
Software Upgrade 12
Image Retrieval 13
Timelapse Viewer Software 14
Field Installation 15
Warranty 16
Accessories 17
FCC 18
Camera Specifications / SD card size chart 19

1

Getting Started

Package contents:
1- Trail Camera
1- 6’ Tree Strap
1- Instruction Manual

SD Card Selection

Install a good quality SD card.
The best brands of SD cards are
Browning branded cards, Sandisk
or Kingston branded cards. Please
see page 19 for a graph showing
how many photos, videos and
timelapse segments can be stored
on SD cards from 4-32GB. Based
on your intended camera usage,
this table will help you determine
what size SD card you need to use
in your camera.

2

SD Card Slot

Camera Lens

IR LED

PIR
Sensor

Light
Sensor

Aim
LED

Program
Buttons

Mode
Button

Power
Switch

Battery
Eject Button

12 volt Ext
Power Port

Mic

LCD
Screen

Camera Diagram

3

Battery
Eject Button

Battery Installation

Release the battery tray by pressing the
Battery Eject button. The battery tray will
eject about 1/2”. To completely remove
the battery tray, simply pull the tray with
a bit of force.

Install 6 AA Alkalineor Lithium batteries in
the battery tray. Make sure you install the
batteries with the
correct polarity,
following the
markings on the
battery tray. For
opimtimal
performance we
recommend using
Browning
branded
batteries,
Energizer
or Duracell.

Slide the battery
tray into the
closed position.

4

Home Screen

Turn the camera’s power on by sliding
the power switch to the ON position.

The home screen displays the camera
operation mode, pictures or videos
taken, pictures or videos possible on
the SD card, camera delay countdown
and battery life meter. With home
screen displayed, the camera is armed
and ready to start taking pictures.

The possible camera modes displayed are
Trail, Video,and Timelapse Plus (TL+).

The battery life meter shows the charge
left in your batteries.

The battery indicator changes to EXT
when an external battery is plugged into
the external power port.

Trail DLY09
0000/2300