Page 1
Wireless Noise Cancelling
Earbuds
HEAR YOUR MUSIC — AND NOTHING ELSE
Page 2
1
TABLE OF CONTENTS
Warnings and Cautions .........................................................................................1
Lithium-Ion Battery Warning............................................................................4
Location of Parts and Controls ..................................................................... 5
Charging the Battery ............................................................................................. 6
Charging With the OTG Connector .............................................................7
Pairing with Bluetooth
®
....................................................................................... 8
Operation ........................................................................................................................ 9
Care and Maintenance ......................................................................................10
Specifications ........................................................................................................... 11
Warranty ........................................................................................................................12
FCC INFORMATION
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for
a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Page 3
2 3
WARNING: To comply with FCC's RF radiation exposure limits for general
population/uncontrolled exposure, the antenna(s) used for this transmitter
must be installed to provide a separation distance of at least 20 cm from
all persons and must not be collocated or operating in conjunction with
any other antenna or transmitter.
This equipment complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This equipment may not cause harmful interference.
2. This equipment must accept any interference received, including
interference
that may cause undesired operation.
FCC ID: 2AB5T-HE8
CAUTION
• This device contains magnets. To avoid damage or malfunction, keep
credit cards and other products that are sensitive to magnetic fields
away from this device.
• When used in Noise Cancelling mode, these earbuds diminish your
ability to hear background noise. For your safety and the safety of
others, do not use Noise Cancelling mode while driving, cycling, or in
any situation where reduced ability to hear your surroundings may be
hazardous.
• These earbuds fit snugly in your ears. Long-time use may cause
discomfort. If you experience discomfort, remove the earbuds.
• Pushing the earbuds too far into your ears, or removing them with a
fast motion, may cause discomfort. Remove your earbuds slowly.
• Listening to audio at a high volume may affect your hearing.
• The static electricity accumulated in the body may cause a slight feeling
of electric shock when using the earbuds. Wearing clothes made of
natural materials can reduce this affect.
• Do not drop, crush, bend or apply excessive force to the device.
• Do not expose the device to moisture, extreme or prolonged heat, cold,
humidity, or other adverse conditions. Avoid storage in damp, humid or
wet locations.
• The unit can only be opened by qualified personnel.
Page 4
4 5
LITHIUM-ION BATTERY WARNING
This device contains a rechargeable Lithium-Ion battery. The battery
must be recycled or disposed of properly. Contact your local waste
management office for information on battery recycling or disposal.
Use only the supplied cable to recharge the battery. Improper charging
may damage the battery and the device.
Do not attempt to open the rechargeable battery or battery pack. There
are no serviceable parts inside.
Keep the battery out of reach of children. If swallowed, consult a physician
immediately.
Do not dispose of battery in a fire as it may explode. Battery may also
explode if damaged.
BC
LOCATION OF PARTS AND CONTROLS
Earbud End of Charging Unit
USB End of Charging Unit
USB/OTG Connector
Active Noise
Cancelling
(ANC) Button
Microphone
Volume Up/Next Button
Pairing Indicator
(on back, not shown)
ON/OFF Button
Volume Down/Previous Button
Charging Indicator
ON
OFF
Page 5
USB CONNECTOR/
OTG CONNECTOR
USB END OF
CHARGI NG UNIT
EARBUD END OF
CHARGI NG UNIT
CHARGING THE BATTERY
Charge the battery for at least 8 hours before first use. After charging, the
device can be used without the power connection.
If the device is not used for a long period of time, the battery may require
recharging. A tone sounds twice per minute when the battery is low.
To charge the battery:
1. Plug the USB connector into a USB port on an active device. (If the
Micro USB connector is extended, press the blue button and push in
the Micro USB connector to retract it.)
2. Place the USB end of the magnetic charging unit and the earbud end
of the magnetic charging unit together. The Charging Indicator turns
red during charging. The indicator turns off when the earbuds are fully
charged.
76
CHARGING WITH THE OTG CONNECTOR
The On The Go (OTG) Connector offers an alternative way to charge the
battery, using a Micro USB port.
To charge the battery using the OTG Connector:
1. On the back side of the USB/OTG Connector, press up on the small
blue recessed line to extend the Micro USB connector, and press up
on the second blue line to fully extend the Micro USB connector. The
blue button will pop into its slot when the connector is fully extended.
2. Insert the Micro USB connector into a Micro USB port in a device that
supports the OTG charging function.
3. Place the USB end of the magnetic charging unit and the earbud end
of the magnetic charging unit together. The Charging Indicator turns
red during charging. The indicator turns off when the earbuds are fully
charged.
4. To retract the Micro USB, press in on the blue button and press down
on the Micro USB connector.
CHARGING INDICATOR
Page 6
8 9
OPERATION
Button Operation Function
O
Long press 3 seconds Power on
Long press 3 seconds Power off
Short press Play/pause
Short press Answer a call
Short press End a call
Press and hold for
approximately 2 seconds
Refuse call
+
Short press Volume up by one step
Press and hold Volume increases continuously
Short press twice Play next track
_
Short press Volume down by one step
Press and hold Volume decreases continuously
Short press twice Play previous track
ANC
Switch
Slide to ON or OFF Enter/Exit Noise Cancelling mode.
When ON, a green LED is visible
in the switch.
PAIRING WITH BLUETOOTH
®
1. Prepare your device (e.g., smartphone) to pair using Bluetooth®,
making sure that the device is within 33 feet of the earbuds. Refer to
your device's owner’s manual for information on using the Bluetooth
®
function.
2. Press and hold the earbud's ON/OFF Button until the Pairing Indicator
(on the back of the in-line controller) quick flashes blue, indicating that
the earbuds are in pairing mode.
3. On your device, search the list of available devices and select ANC
EARBUDS. Note that it may take a few seconds for the earbuds to be
listed as an available device. Depending on your device, you may have
to tap SCAN to update the device list. Consult your device's owner's
manual.
4. If prompted, type the password or PIN 0000.
A message will display on your device confirming that your device is now
paired/connected and the earbud's Pairing Indicator will slow flash blue
indicating that the device is paired.
The devices will remain paired, even after being turned off, until you
cancel the pairing. Consult your device's owner's manual for information
on cancelling pairing.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any
use of such marks by Brookstone is under license.
Page 7
10 11
SPECIFICATIONS
Load impedance 32 Ohm
Frequency range 20Hz-20khz
Power supply Lithium battery or USB cable
Weight Approx. 9.95 oz (282 grams)
Dimensions Charging cable approx. 24 in. (609mm)
Earbuds approx. 12 in. (304mm)
Operating range Up to 33 feet (10 meters)
Battery capacity 80mAh
Battery charging time 2 hours
Battery life @ 50% max.
volume (random songs)
Up to 3.5 hours in Bluetooth and Noise
Cancelling modes
Up to 4.5 hours in Bluetooth mode only
Up to 10.5 hours in Noise Cancelling mode only
Noise reduction Approx. 20dB in Bluetooth and Noise
Cancelling mode
Approx. 20dB in Noise Cancelling mode
NOTE: When placing the earbuds into your ears, the earbuds may make a
noise. This is normal.
CARE AND MAINTENANCE
Clean the earbuds with a soft cloth or damp chamois leather. Never use
solvents.
Page 8
Brookstone products. Manufacturers or suppliers other than Brookstone may
provide their own warranties to the purchaser, but Brookstone, in so far as
permitted by law, provides these products “as is.” This warranty does not apply
to: a) damage caused by failure to follow instructions relating to product’s
use or the installation of components; b) damage caused by accident, abuse,
misuse, fire, floods, earthquake or other external causes; c) damage caused
by service performed by anyone who is not a representative of Brookstone; d)
accessories used in conjunction with a covered product; e) a product or part
that has been modified to alter functionality or capability; f) items intended to
be periodically replaced by the purchaser during the normal life of the product
including, without limitation, batteries or lightbulbs; g) any product sold “as is”
including, without limitation, floor demonstration models and refurbished items;
or h) a product that is used commercially or for a commercial purpose.
BROOKSTONE SHALL NOT BE LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF
THIS PRODUCT, OR ARISING OUT OF ANY B REACH OF THIS
WARRANTY. TO THE EXTENT PERM ITTED BY APPLICABLE LAW,
BROOKSTONE DISCLAIMS ANY AND ALL STATUTORY OR IMPLIED
WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
AND WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS. IF
BROOKSTONE CANNOT LAWFULLY DISCLAIM STATUTORY OR
IMPLIED WARRANTIES, THEN TO THE EXTENT PERMITTED BY LAW,
ALL SUCH WARRANTIES SHALL BE LIMITE D IN DURATION TO THE
DURATION OF THIS EXPRESS WARRANTY.
Some states disallow the exclusion or limitation of incidental or consequential
damages or how long an implied warranty lasts, so the above exclusions or
limitations may not apply to you. This warranty gives you specific legal rights
and you may also have other rights, which vary from state to state.
1312
ONE (1) YEAR LIMITED WARRANTY
Brookstone® warrants this product against defects in materials and/or
workmanship under normal use for a period of ONE (1) YEAR from the date of
purchase by the original purchaser (“Warranty Period”). If a defect arises and a
valid claim is received within the Warranty Period, at its option, Brookstone will
either 1) repair the defect at no charge, using new or refurbished replacement
parts, or 2) replace the product with a new product that is at least functionally
equivalent to the original product, or 3) provide a store credit in the amount
of the purchase price of the original product. A replacement product or part,
including a user-installable part installed in accordance with instructions
provided by Brookstone, assumes the remaining warranty of the original
product. When a product or part is exchanged, any replacement item becomes
your property and the replaced item becomes Brookstone’s property. When a
store credit is given, the original product must be returned to Brookstone and
becomes Brookstone’s property.
Obtaining Service: To obtain warranty service, call Brookstone Limited
Warranty Service at 1-800-292-9819. Please be prepared to describe the
product that needs service and the nature of the problem. A purchase receipt
is required. All repairs and replacements must be authorized in advance.
Service options, parts availability and response times will vary. You are
responsible for delivery and the cost of delivery of the product or any parts to
the authorized service center for replacement, per our instructions.
Limits and Exclusions: Coverage under this Limited Warranty is limited to
the United States of America, including the District of Columbia and the U.S.
Territories of Guam, Puerto Rico, and the U.S. Virgin Islands. This Limited
Warranty applies only to products manufactured for Brookstone that can
be identified by the “Brookstone” trademark, trade name, or logo affixed to
them or their packaging. The Limited Warranty does not apply to any non-
Page 9
321701 • 321702
©Brookstone 2017
Find thousands more
great ideas online
Merrimack, New Hampshire USA 03054 • 800-846-3000 • Brookstone.com
Loading...