STATIONARY SIDE SHELF KIT
OWNER’S MANUAL
RETAIN OWNER’S MANUAL FOR FUTURE REFERENCE.
B100623-0-1102
B100623-0-1102 Page 1
IMPORTANT INFORMATION
CONGRATULATIONS!
You have chosen the finest accessory for your outdoor cooking pleasure.
Please take time to read this entire manual before installing your premium Broilmaster® Shelf Kit.
Pull Handle.................................................................................................................................
C22
Side Shelf Installation - SKCHAR, SKTAU...................................................................................4
Side Shelf Installation - SKSS......................................................................................................5
Side Shelf Installation - SKWOOD ...............................................................................................6
Side Shelf Installation - SKGRAY.................................................................................................7
Parts Diagram & Parts List - Side Shelf .......................................................................................8
IMPORTANT: THIS MANUAL SHOULD BE READ THOROUGHLY BY THE PERSON INSTALLING THE
SHELF
SHOULD
RETAIN
PROPERLY
KIT AND ALL PERSONS WHO WILL USE AND MAINTAIN THE SHELF KIT. THE INSTALLER
BE SURE THE MANUAL IS LEFT IN THE POSSESSION OF THE USER. THE USER SHOULD
THIS MANUAL FOR FUTURE REFERENCE WHEN USING OR CLEANING THE SHELF KIT AND TO
IDENTIFY ANY REPAIR PARTS THAT MAY BE REQUIRED.
.3
Before You Begin
This manual includes an illustration for each of the
five shelf kits available for your grill. Locate the
illustration that depicts the shelf kit you have and
then carefully follow all instructions pertaining to your
kit.
Each step of the installation is illustrated. In each
illustration parts are identified with "Index" numbers.
Index numbers appear in parenthesis after a part
name is mentioned for the first time in the
instructions and are labeled on the illustrations. Y ou
can reference each part by its key number on the
Parts List if you need help in identifying a part.
Compare the parts found in the shipping container
to the parts list. If any parts are missing contact
your Broilmaster
CAUTION: PARTS MAY HAVE SHARP EDGES.
WEAR LEATHER WORK GLOVES AND HANDLE
PARTS
ASSEMBLY AND THE INSTALLATION.
CAREFULLY DURING THE UNPACKING,
®
dealer before beginning assembly.
Tools Required
These tools are required for the assembly of your
shelf kit:
• Phillips screwdriver
• Socket set or nut drivers
Page 2 B100623-0-1102
Pull Handle
Pull Handle
Place two bolts 1/4-20 x 1-1/2 into holes in pull
handle (10) and through holes on left or right side
of grill bottom.
Fasten each bolt with a washer, lock washer, and
nut. FIGURE 1.
Repeat procedure for the right side.
10
FIGURE 1
FIGURE 2
B100623-0-1102 Page 3