Broil King SKFGRAY, SKFPGRAY Owner's Manual

DROP-DOWN SHELF KIT OWNER’S MANUAL

CONGRATULATIONS!

You have chosen the finest accessory for your outdoor cooking pleasure.

Please take time to read this entire manual before installing your premium Broilmaster® Shelf Kit.

Before You Begin

This manual includes an illustration for each of the drop-down shelf kit available for your grill.
Compare the parts found in the shipping container to the parts list. If any parts are missing contact

your Broilmaster® dealer before beginning assembly.

CAUTION: PARTS MAY HAVE SHARP EDGES. WEAR LEATHER WORK GLOVES AND HANDLE PARTS CAREFULLY DURING

UNPACKING, ASSEMBLY AND THE INSTALLATION.

THE

RETAIN OWNER’S MANUAL FOR FUTURE REFERENCE.

B100637-1-0103 Page 1

B100637-1-0103

IMPORTANT INFORMATION

IMPORTANT: THIS MANUAL SHOULD BE READ THOROUGHLY BY THE PERSON INSTALLING THE SHELF KIT AND

PERSONS WHO WILL USE AND MAINTAIN THE SHELF KIT. THE INSTALLER SHOULD BE SURE THE MANUAL

ALL

LEFT IN THE POSSESSION OF THE USER. THE USER SHOULD RETAIN THIS MANUAL FOR FUTURE REFERENCE

IS

USING OR CLEANING THE SHELF KIT AND TO PROPERLY IDENTIFY ANY REPAIR PARTS THAT MAY BE

WHEN
REQUIRED

.

SIDE SHELF INSTALLATION - SKFPGRAY, SKFGRAY

Tools Required

These tools are required for the assembly of your shelf kit:

• Phillips screwdriver

• Socket set or nut drivers

Solid Surface Drop-Down Side Shelf

If installed remove cooking grids, briquet and briquet rack.
Secure bracket attach to grill head with (2) 1/4 - 20 x 3/4" bolts, lock washer, flat washer and 1/4 -20 hex nut. FIGURE 1.
Flex support brackets and align bottom slot with bottom pin on bracket attach. FIGURE 2.
Install cooking grids, briquet and briquet rack.

FIGURE 1

IGURE 2

F

Page 2 B100637-1-0103