Broil King CSR-3TB, CSR-1TB, CDR-2CFBB, CDR-1TB, CDR-1TFBB User Manual

CLEANING & MAINTENANCE INSTRUCTIONS (contd.)

4. Clean the element and drip area (on coiled element units.) If liquids or other
foreign material are allowed to drip down through the element pan and
into the housing, the warranty is voided.

5. Use damp sudsy cloth to clean chrome finished surfaces - NEVER USE
ABRASIVES OR STEEL WOOL ON FINISHED SURFACES. To polish, use
a non-abrasive glass cleaner.

Professional

Hot Plates

6. Thoroughly wipe soap and water from surface of hot plate and heating
element. DO NOT IMMERSE IN LIQUID.

7. Leave unit unplugged when not in use.

LIMITED TWO-YEAR WARRANTY

This product is warranted to be free from defects in material and workmanship
under normal use and service for a for a period of two (2) years from the date
of purchase by the user thereof, or for maximum period of thirty (30) months
from the date of manufacture if unit was a gift (refer to ink stamp or black dated
sticker on appliance. Removing sticker voids the warranty.)
To obtain service during warranty period, call BroilKing* at 860-738-2200 for
a Return Authorization Number. Return Authorization Number MUST be

written on outside of carton to track the unit and avoid service delays.

Then return the appliance, insured and freight prepaid, to the BroilKing factory:
BroilKing Corp., ATTN: REPAIR, 143 Colebrook River Road, Winsted, CT
06098, Phone: [phone], Fax: [phone]). Proof of purchase is
required when requesting warranty service - SAVE YOUR SALES RECEIPT.
Send a copy of your receipt along with a note stating your name, address, phone
number, and the nature of the problem, and requesting warranty service. Be sure
to package the unit carefully; we are not responsible for damage occurring
during shipment to the repair facility.
This warranty is extended only to the original purchaser and does not apply
to shipping damage, accidental breakage, alteration, tampering, misuse or
abuse, commercial use, unreasonable use, or damage to the product (not
resulting from defect or malfunction) while in the possession of the consumer.
Lost or broken cordsets, breakage of glass, nonstick or other coatings are not
covered by this warranty.
BroilKing Corp. disclaims all responsibility for consequential, incidental, or
commercial losses caused by the use of this product. Some states do not allow
this exclusion or limitation of incidental or consequential losses, so the foregoing
disclaimer may not apply to you. This warranty gives you specific legal rights,
and you may also have other legal rights, which vary from state to state.
Warranty is applicable only in USA.

Use & Care Manual

Models CSR-1TB, CSR-3TB,

CDR-1TB, CDR-1TFBB, CDR-2CFBB

CSR-1TB

120 Volts

1100 Watts/

9 Amps

CDR-1TB

120 Volts

1650 Watts/

15 Amps

CDR-1TFBB

120 Volts

1650 Watts/

13.8 Amps

CDR-2CFBB

120 Volts

1800 Watts/

15 Amps

CSR-3TB

120 Volts

1500 Watts/

12.5 Amps

Model Number:___________Date of Purchase: _____________________

Place of Purchase: ____________________________________________

To expedite all warranty claims please keep your dated sales receipt from
place of purchase.

5/4/2011 RV00

4

BroilKing Corp.

143 Colebrook River Road, Winsted, CT 06098

[phone]

Website: www.broilking.com l E-mail: [e-mail]

l Fax [phone]

Congratulations on your purchase of a BroilKing Professional Hot Plate. We offer
a line of Professional products designed and engineered to bring commercial
quality, durability and dependability to the home kitchen. BroilKing Professional
Ho Plates duplicate the structural design, materials and components of the
equipment used in the finest restaurants and hotels. Professional models warranted

FOR HOME USE ONLY.

IMPORTANT SAFEGUARDS

1. Read all instructions before use.

2. Do not touch hot surfaces! Always use hot pad or pot holder until unit cools.

3. To protect against electrical hazards, do not immerse cord, plug, or hot plate
in water or any other liquid.

4. Close supervision is necessary when any appliance is used by or near
children.

5. Unplug from outlet before cleaning. Allow to cool completely before
putting on or taking off parts.

6. Do not operate any appliance with a damaged cord or plug or, if the

appliance malfunctions or has been damaged in any manner. Call Factory
Service at 860-738-2200.

7. Do not use outdoors.

8. Do not let cord hang over edge of table or counter or touch hot surfaces.

9. Do not use appliance for other than intended use.

10. Do not clean with metal scouring pads. Pieces can break off the pad and

touch electrical parts, creating a shock hazard.

11. A fire may occur if this appliance is covered or touching flammable

material, including curtains, walls, etc., when in operation. To avoid

excessive heat on wall(s) while cooking, always keep a space of at
least 4 between your BroilKing hot plate and your rear and side walls.

12. Do not use plastic dishes or plastic wraps on heating elements.

SAVE THESE INSTRUCTIONS

OPERATING INSTRUCTIONS

1. Avoid letting water or food drop or boil over onto heating element.
If liquids or other foreign material are allowed to drip down through
the element pan and into the housing, the warranty is voided.

2. Rocker switch light will come on when hot plate is plugged into electric outlet
and the rocker switch is put in ON position.
Round signal light(s) will come on when heat control knob is turned fromOFF

to a heat setting. They will cycle on & off as the element maintains temperature.

3. As with all countertop hot plates as well as stovetops, the most efficient
cooking/heating will be done when using pans that are closest in diameter
to the heating element. For best results, the pot or pan used should not
exceed the heating element diameter.

CSR-1TB, CDR-1TB, & CDR-1TFBB: 6 diameter coil element(s)
CSR-3TB: 8 diameter coil element
CDR-2CFBB: 7-1/2diameter solid elements

4. Be sure your Hot Plate is resting level on countertop. Avoid using pans that

are unstable and easily tipped.

5. To avoid excessive heat on wall(s) while cooking, always keep a space

of at least 4 between your hot plate and your rear and side walls.

6. Always place the appliance on a heat-resistant surface.

CLEANING & MAINTENANCE INSTRUCTIONS

1. Always unplug hot plate from electric outlet and allow to cool before
cleaning. Caution: Heating element may be hot without glowing red. Be

sure element is cool before touching.

IMPORTANT NOTES

1. Your unit is equipped with a grounded, current-carrying 3 pronged plug which

will fit into any standard 3 pronged outlet. This is a safety feature. Electrical

connection must be a proper outlet for the 3 pronged cord. Before
connecting power, make sure the voltage and frequency correspond
to the data plate on the unit.

2. A short power cord is provided to reduce the hazards resulting from
accidents such as tripping, entanglement, etc.

-If a long cord set or extension cord is used:
(A) The marketed electrical rating of the cord set or extension cord should
be at least as great as the electrical rating of the appliance.
(B) The longer cord should be arranged so that it will not drape over the
countertop or tabletop, where it can be pulled on by children or tripped over
accidentally.

3. Call BroilKing Customer Service at 860-738-2200 with any questions or
service needs.

2

2. Coil models: clean the element(s) by gripping an element at the point opposite
where it goes into the holes in the drip pan and tilting it up. (Do not force

it up higher than it will go easily.) Clean the element and drip area. If
liquids or other foreign material are allowed to drip down through the
element pan and into the housing, the warranty is voided.

4. Use damp cloth with mild detergent to clean stainless surtaces - NEVER
USE ABRASIVES OR STEEL WOOL ON FINISHED SURFACES. To polish,
use a non-abrasive glass cleaner.

5. Thoroughly wipe soap and water from surface of hot plate and heating
element. DO NOT IMMERSE UNIT IN LIQUID. Make sure that no water can
infiltrate the heat vents or the bottom of unit.

6. Leave unit unplugged when not in use.

3