MODEL AE50110DCSL
SPECIFICATION SHEET
FLEX DC
SERIES
HUMIDITY SENSING FAN / LIGHT
TM
A modern-styled, high performance fan, with sensing circuitry,
that "knows" when to ventilate the room.
FEATURES
BLOWER:
• Plug-in, permanently lubricated, brushless DC motor engineered for continuous operation
• Dynamically balanced centrifugal blower wheel for quiet,
efficient performance
• Low RPM for quiet operation
• Selectable settings of 50, 80 or 110 CFM
HOUSING:
• Rugged, 26 gauge, galvanized steel construction
• Polymeric, 4” damper / duct connector with tapered sleeve
and no metallic clatter
• 5-3/4” height allows for 2” x 6” ceiling installations
• Sturdy, easy, four-point mounting directly to joist
• Optional snap-on flange kit
GRILLE:
• Polymeric construction
• Innovative design - the result of extensive research with
designers and consumers
• 11-Watt integrated LED lighting for energy efficiency
• 3500K color temperature provides soft white light - ideal for
bathroom illumination
• LED lasts up to 25,000 hours for maintenance-free
convenience
DIMMING CONTROLS :
• For a list of compatible dimming controls, see the
RESOURCES link for Model AE50-110DCSL at
www.broan.com
• Each application is unique and various factors such as
load, common neutrals or other electrical products on the
circuit can, in certain instances, cause variance in system
performance
• Dimmer model numbers vary slightly depending on
color, packaging type, etc. such that variations of
model numbers may be suitable. Consult dimming
system manufacturer for additional support in
operation
AUTOMATIC CONTROL:
• Humidity control automatically turns fan ON when
either of these conditions is detected:
- a rapid to moderate (user adjustable) increase of
humidity
- humidity above user-adjustable set-point (50%-80%
RH)
• Two wire manual operation for odor control - Turns fan
ON when power line through wall switch is cycled ON,
OFF and back ON
• Remains ON for a user-adjustable 5 to 60 minutes
after humidity has stabilized and is below set-point or
after manually initiated through power line cycling
• Saves energy because unit runs only for the time
required. A unit controlled with a wall timer may keep
fan ON longer than required or turn it OFF before
room is sufficiently ventilated
U.L. Listed for use over bathtubs and showers when
connected to a GFCI protected branch circuit (ceiling
mount only)
U.L. Listed for use in insulated ceilings (Type I.C.)
3-Year Warranty
JA8-2019
Broan Hartford, Wisconsin www.broan.com 800-558-1711
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
81K 1100250B
PERFORMANCE RATINGS - MODEL AE50110DCSL FLEX DCTM SERIES HUMIDITY SENSING FAN / LIGHT
HVI PERFORMANCE
Speed
Setting
50
80
110
Static
Pressure
(In. H2O)
Airow
(CFM)
Sound
(Sones)
0.1 50 < 0.3 3.4 14.7
0.25 36 0.5 5.3 6.7
0.1 80 0.4 6.5 12.6
0.25 71 0.9 9.4 7.6
0.1 110 0.9 10.6 10.4
0.25 105 1.4 14.9 7.0
HVI-2100 CERTIFIED RATINGS comply with new testing
technologies and procedures prescribed by the Home
Ventilating Institute, for off-the-shelf products, as they are
available to consumers. Product performance is rated at 0.1 in.
static pressure, based on tests conducted in a state-of-the-art
test laboratory. Sones are a measure of humanly-perceived
loudness, based on laboratory measurements.
ELECTRICAL & WEIGHT
Volts Hz Amps
120 60 0.4 8.5 lb.
Shipping
Weight
Power
(Watts)
Efcacy
(CFM/W)
AIR FLOW PERFORMANCE
50 CFM Setting
0.6
0.5
0.4
0.3
Static Pressure
0.2
O - Inches of Water Gauge)
2
0.1
(In. H
0.0
0 10 20 30 40 50 60
Airflow (CFM - Cubic Feet per Minute)
80 CFM Setting
0.7
0.6
0.5
JA8-2019
0.4
0.3
Static Pressure
O - Inches of Water Gauge)
2
0.2
(In. H
0.1
0.0
0 10 20 30 40 50 60 70 80 90
Airflow (CFM - Cubic Feet per Minute)
110 CFM Setting
0.8
0.7
0.6
0.5
0.4
0.3
Static Pressure
O - Inches of Water Gauge)
2
0.2
(In. H
0.1
0.0
0 10 20 30 40 50 60 70 80 90 100 110 120
Airflow (CFM - Cubic Feet per Minute)
Broan Hartford, Wisconsin www.broan.com 800-558-1711
Loading...