Broan 412123 Instruction Manual

Download

Page 1

RANGE HOODS BLOWERS ACCESSORIES

Page 2

Know what you’re breathing?

Clear the air with simple solutions from Broan.

Most are aware

90% of American homeowners realize that poor indoor air quality can contribute to certain health issues and that healthy air could help prevent illness.

A majority (60%) of homeowners know that indoor air quality has a greater impact on their health than outdoor air quality.

And haven’t acted

Less than half of Americans (46%) recognize that a lack of a bathroom fan has a negative impact on indoor air quality, and only 42% recognize that a lack of a range hood also has a negative impact.

Only 61% of American homeowners have a range hood, and only 33% of that group uses it nearly every time they cook; only 27% keep it on for 10 minutes after they’re done cooking.

Nearly 6 in 10 have a fan in each bathroom but only one in ﬁve keep it on for 10 minutes after showering. Only 7% say that they change it when their mirrors start fogging up.

Page 3

According to a national survey, homeowners

are aware that INDOOR AIR QUALITY (IAQ)

is an issue but they don’t take appropriate

measures to prevent airborne pollutants and

improve the air they breathe.

But may not know

Only two in ﬁve (42%) worry

about moisture that could cause

mold or mildew.

Less than one-quarter (22%) actually

worry about the poor air quality in their

homes. They are much more concerned

with bugs or intruders.

Only 33% of Americans know that

the smell of food lasting in the

home after it’s been prepared is an

indicator of poor IAQ.

THE LEADER

IN INDOOR AIR QUALITY

These Broan products solve indoor air quality issues.

Keep humidity levels in check.

81% don’t know that a foggy

mirror means poor IAQ.

41% of Americans say that

their bathroom mirror fogs

up when they shower.

Clear the kitchen air.

Strike some balance.

Page 4

Choosing the Right Range Hood 6–7

Chimney Hoods 8–15

Downdrafts 16–17

Power Packs and Power Modules 18–21

ENERGY STAR Hoods 22–25

High Performance Hoods 26–33

Under Cabinet Hoods 34–47

Accessories 48–49

Blowers/Installation Guidelines 50–51

Specifications 52–55

Why kitchens need ventilation.

Fresh salmon fillets are reason enough. But that’s really just a start. Because cooking smoke and greasy build-up are more than unpleasant. They’re unhealthy. In fact, cooking churns out airborne contaminants like nothing else in the home can. This concentration of contaminants requires effective ventilation. That’s where Broan comes in. As the residential ventilation leader, Broan offers more range hood kitchen ventilating solutions than anyone. From high-performance ducted models, to the most effective non-ducted units ever made. And they’re all built to Broan’s demanding quality standards. So you can count on Broan range hoods to help keep your kitchen cleaner for years to come. And, built-in lighting keeps your kitchen brighter. Some units even include a convenient nightlight feature. There really is a difference with Broan. It’s in the details.

Page 5

Elite (Rangemaster®), our premier range

Broan hoods, offer high performance and unique style to define your kitchen. See pages 8–19, and 26–32.

Problem.

effectively capture smoke and odors. Your children can’t reach it without climbing on the counter, not to mention trying to use it while someone else is cooking.

Your over-the-range microwave doesn’t

Solution.

replacing your over-the-range microwave with a handsome Broan range hood. Move your microwave to a shelf next to the refrigerator and improve not only the safety of your kitchen, but its efficiency as well.

Improve the ventilation in your kitchen by

Page 6

Selection

Chimney and High Performance Hoods

Do you have an open concept kitchen?

Consider a chimney style range hood. Distinguish your kitchen with a centerpiece that provides function and high style. Be sure your blower matches the BTU output of your range.

Power Packs

Thinking of designing custom cabinetry?

Power packs allow you to conceal your range hood under a cabinet for a clean look. Insert a power pack and achieve all the benefits of a Broan range hood.

How do you cook?

What do you expect your range hood to do?

Broan has styles and accessories to suit every need.

Looking for convenience in a high performance range hood? Under

cabinet range hoods provide homeowners with high style and modern convenience. Sleek designs fit snugly under cabinets and stainless steel bottoms make cleaning easy. Be sure your blower matches the BTU output of your range.

Protect your cabinetry with custom liners. They

protect your cabinetry from steam and grease while providing a custom fit all the way around.

Downdrafts

Looking for a range hood that’s there when you need it and hidden when you don’t?

Downdraft range hoods are perfect for island or peninsula installations. You receive the right amount of ventilation literally at the push of a button.

An optional remote control button puts you in charge from anywhere in the kitchen.

Page 7

Selection

Select an In-Line or Exterior blower.*

If desired, choose an In-Line or Exterior blower option. Exterior blowers can be roof- or wallmounted, depending on your appearance preferences, or to best suit your ducting requirements. In-Line blowers perform quietly and mount in the attic space.

Select an In-Line or Exterior blower.*

If desired, choose an In-Line or Exterior blower option. Exterior blowers can be roof- or wall-mounted, depending on your appearance preferences, or to best suit your ducting requirements. In-Line blowers perform quietly and mount in the attic space.

In-Line

Exterior

In-Line

Exterior

Do you have tall ceilings and a chimney hood?

You’ll need a flue extension if your ceiling height is greater than 9'. Flue extensions are matched to the shape, style and color of the range hood you select. Extensions for ceiling heights over 10' feet have a 14-week lead time.

Replacement and odor absorbing filters.

Recirculate fresh filtered air back into the kitchen. They are made from the highest quality materials to provide the longest life possible.

Going for a professional or decorator look?

Consider adding stainless steel baffle filters, warming racks or a backsplash. These durable accessories are functional and easy to clean.

Select an In-Line or Exterior blower.*

In-Line

Exterior

Equalized Air Pressure For A Well-Balanced Home (and budget).

Providing make-up air for exhaust devices is easy, controlling it is not—until now. Broan Automatic Make-Up Air Dampers are the first to provide synchronized operation for kitchen, bath and whole house ventilation products. Installation is simple and requires no special wiring. The intelligent design options ensure optimum performance in a variety of installations and applications. Highly effective and affordable, Broan Automatic MakeUp Air Dampers strike the perfect balance to keep you and your home breathing easy.

* Broan blowers are designed and UL Listed or recognized for use with

Broan products only.

Broan range hoods can be used to comply with California's Title 24.

Page 8

Chimney Hoods

The design says professional.

The details say perfection.

Sophisticated tastes deserve sophisticated styling. That’s why we created the Broan Elite Series. These range hoods are unique works of art that flawlessly blend style, power and durability. Choosing between them won’t be easy. One thing, however, is certain: you’re sure to be completely satisfied with the combination of style and power you select. Our commercial-style range hoods feature serious ventilating performance for the serious home chef. They’re specifically designed for use with high BTU, commercial-style ranges. They also accommodate the high-capacity demands of residential woks and cooktop grills. And, since true satisfaction and exquisite taste go hand-in-hand, we offer an extensive selection and a wide array of options and colors.

Page 9

Broan Elite

25-5/8"

30-1/2" – 35-1/4" Ducted

30-1/2" – 39-1/4" Non-Ducted

Chimney Hoods

63000/63000EX (Island)

Rangemaster

Perfection—any way you look at it. This free-hanging island hood will draw the eye from every vantage point.

• Enduring style, stainless steel construction.

• Seamless corners for easy cleaning.

• Concealed three-speed control.

• Heat Sentry™ detects excessive heat and adjusts blower speed to high automatically.

• 275⁄8

" x 393⁄8

" (70 cm x 100 cm) size.

• Superior lighting from four 20-watt Halogen lamps included (one level).

• The 63000EX models are designed to operate with Broan Elite External blowers, providing a choice of four Exterior models: 600, 900, 1200 or 1500 CFM or four In-Line models: 280, 600, 800 or 1100 CFM.

• Telescopic flue fits 8' to 9' ceilings.

• Easily removable, dishwasher-safe stainless steel grease filter.

Range Hood Specifications Optional Accessories

STAINLESS FLUE MAKE-UP WIDTH STEEL BLOWER VOLTS AMPS CFM SONES DUCT EXTENSION* AIR DAMPER

27 (70 x 100cm)

†

External and In-Line blowers sold separately. *Optional ﬂue extension for 10' ceiling—extensions over 10' have up to a 14-week order time. **Hood amps without blower. For total system amps, combine hood with external blower amps.

637004 Internal 120 5.5 900 9.5 8" RD RFX6304EX MD6TU, MD8TU

⁄8" x 393⁄8"

637004EX External† 120 0.8** † 8" RD RFX6304EX MD6TU, MD8TU

Broan Elite EI59 (Island)

Beautiful contemporary European glass island design. The curved glass canopy

provides a stunning focal point without blocking the view of your surroundings.

• Contemporary Italian Glass Canopy design.

• Available in brushed stainless steel.

• 35-3/8" x 25-5/8" dimension.

• Powerful 500 CFM internal blower.

• Bright quad halogen lighting;

• 3-Speed electronic push button control with

• Control features include Delay-off and Filter

• Optional Remote Control Operation—BCR1.

• Quick release aluminum mesh filters.

• Designed to work with Broan Automatic

• Heat Sentry™ detects excessive heat and adjusts

• Telescopic flue accommodates ceiling heights

3-intensity settings (lamps included).

blue speed selection indication.

clean reminder.

Make-up air dampers.

blower speed automatically.

8' to 9'; custom lengths upon demand.

10-3/8"

10-7/8"

18-3/4

21-1/16

35-3/8"

An optional remote control with magnetic base enables operation of blower speed, lighting and delay-off feature from across the room.

Range Hood Specifications

WIDTH

35-3/8" x 25-5/8" EI5936SS Internal 120 3.55 500/200 10.5/2.5 6" RD

STAINLESS

STEEL BLOWER VOLTS AMPS CFM SONES DUCT

Optional Accessories

FLUE EXTENSION* NON-DUCTED KIT**

FXNE59SS RKE59 FILTERE56 BCR1 MD6T, MD8T

* Optional ﬂue extension for either ducted or non-ducted 9' to 10' ceilings. Extensions for ceilings of

10'–12' have up to a 14 week order time.

**Includes non-ducted ﬁlter & ﬂex duct

NON-DUCTED

FILTER

REMOTE

CONTROL

MAKE-UP

AIR DAMPER

Make-Up Air Damper Model MD6T, MD8T

Page 10

Chimney Hoods

Range Hood Specifications

STAINLESS CFM SONES WIDTH STEEL VOLTS AMPS High/Low High/Low DUCT

357⁄16

" x 279⁄16

" E5490SS 120 3.56 480/230** 9.5/3.0 6" RD

** 299 CFM max with ARP6 reducer plate option.

Broan Elite E54000

(Island)

Elegant symmetry from every angle. Graceful curves and a low-profile design make this island hood at home in any décor.

• Brushed stainless steel finish.

• 357⁄16

" x 279⁄16

" dimension.

• Multi-speed slide control.

• Four 20-watt halogen lamps included (one level).

• Dishwasher-safe aluminum filters.

• Telescopic flue accommodates 8' to 9' ceilings—flue extension available for ducted and non-ducted applications.*

• Internal blower delivers 480 CFM (<300 CFM with ARP6).

• Non-ducted kit for indoor recirculation (purchase separately).

• Heat Sentry™ detects excessive heat and adjusts blower speed to high automatically.

10-7/16

11-5/ 8

Optional Accessories

FLUE NON-DUCTED NON-DUCTED NON-DUCTED MAKE-UP EXTENSION FLUE EXTENSION KIT* FILTER AIR DAMPER

FX54SS FXN54SS RK54 FILTERSQUARE MD6TU, MD8TU

*Includes non-ducted ﬁlter.

Range Hood Specifications Optional Accessories

STAINLESS DUCT FLUE NON-DUCTED MAKE-UP WIDTH STEEL BLOWER VOLTS AMPS CFM SONES CONNECTION EXTENSION* FILTER AIR DAMPER

30" 613004 Internal 120 3.1 450+ 9.0 6" RD RFX6104 ROUNDFILTER MD6TU, MD8TU

⁄16" 619004 Internal 120 3.1 450+ 9.0 6" RD RFX6104 ROUNDFILTER MD6TU, MD8TU

35 48" 614804 Internal 120 6.3 900 9.5 8" RD RFX6104EX MD6TU, MD8TU

⁄16" 619004EX External† 120 0.5*** † 8" RD RFX6104EX MD6TU, MD8TU

35 48" 614804EX External† 120 0.8*** † 8" RD RFX6104EX MD6TU, MD8TU

* Optional ducted ﬂue extension for 10' ceiling—extensions

over 10' have up to a 14-week order time.

** Requires a non-ducted ﬁlter kit, purchase separately.

Round ﬁlter or SB08999736.

*** Hood amps w/o blower, for total system amps,

combine hood w/ External blower amps.

†

External blowers sold separately.

299 CFM max with ARP6 reducer plate option.

C MIN C MAX CD CW

613004 255⁄8 619004 25 619004EX 22" 37" 10 614804 22" 37" 10 614804EX 22" 37" 10

" 451⁄2

⁄8

" 451⁄2

" 65⁄8 " 65⁄8

" 91⁄4 " 91⁄4

⁄8

" 123⁄4

⁄8

" 123⁄4

⁄8

" 123⁄4

20 -1/4

27- 9/16

35- 7/16

34 min - 4 6 m ax

3- 7/8

1- 3/16

Broan Elite 61000/61000EX

A flawless look. A lasting impression.

• Seamless corners for easy cleaning.

• Concealed three-speed slide control (EX models have variable speed control).

• Heat Sentry™ detects excessive heat and adjusts blower speed to high automatically.

• The 61000EX models are designed to operate with the Broan Elite External blowers, providing a choice of four Exterior models: 600, 900, 1200 or 1500 CFM, or four In-Line models: 280, 600, 800 or 1100 CFM.

• <300 CFM with optional ARP6

• Two 20-watt (four in 48") halogen lamps included (one level).

• Available in 30", 357⁄16" (90 cm) or 48" sizes.

• Ducted/non-ducted telescopic flues fit 8' to 9' ceilings.

• Convertible to ducted or non-ducted operation.** (excludes 48" model)

• Easily removable, dishwasher-safe, stainless steel grease filters.

• Optional ducted flue extension for up to 10' ceilings.

NOTE: Units using ﬂue extensions are for ducted applications only.

" "

" " "

Page 11

Chimney Hoods

Broan Elite RM65000

and angular surfaces to form a stunning union of stainless steel and glass.

This delightful, hand-crafted design blends curved

• Multi-speed, electronic push-button control features stylish, rounded buttons with individual speed indicators.

• Delay timer automatically shuts off unit after 10 minutes.

• Control light flashes when it’s time to clean the filter.

• Heat Sentry™ detects excessive heat and adjusts blower speed to high automatically.

• Two-level lighting provides bright cooktop illumination and a low nighttime setting.

Range Hood Specifications Optional Accessories

STAINLESS

WIDTH

357⁄16" RM659004 120 3.1 450** 9.0 6" RD RFX6504 MD6TU, MD8TU

* Optional ﬂue extension for 10' ceiling—extensions over 10' have up to a 14-week order time.

** 299 CFM max with ARP6 reducer plate option.

STEEL VOLTS AMPS CFM SONES DUCT FLUE EXTENSION*

Sensational high-design appearance.

• Two 20-watt halogen lamps included.

• Dishwasher-safe aluminum filters feature a quick-release latch and professionalstyle appearance.

• Ducted telescopic flue accommodates ceiling heights from 8 to 9 feet. Extension flues for higher ceilings are also available for ducted applications.

• Install hood so that the bottom of the unit is 24 to 30 inches above the cooking surface. Mounting height is determined by ceiling height.

MAKE-UP

AIR DAMPER

Page 12

Broan Elite EW58

Inspiring traditional European design.

This wonderful design is executed to meet todays needs so that everyone can achieve their dream.

Chimney Hoods

Make-Up Air Damper Models MD6T, MD8T

Model BCR1

An optional remote control with magnetic base enables operation of blower speed, lighting and delay-off feature from across the room.

Broan Elite EW56

Elegant European curved glass design that is both beautiful and functional.

The airy design is a stunning focal point that complements its surrounding perfectly.

Make-Up Air Damper Models MD6T, MD8T

Model BCR1

An optional remote control with magnetic base enables operation of blower speed, lighting and delay-off feature from across the room.

Broan Elite RM53000

Rangemaster

Contemporary lines for a one-of-a-kind kitchen. Clean lines complement the contemporary kitchen or boldly contrast the flowing styles of more traditional settings.

Make-Up Air Damper Models MD6TU, MD8TU

Page 13

19-3/4"

8-3/4"

19-3/4"

• Traditional Italian design with high-performance features.

• Available in brushed stainless steel.

• Two widths 30" & 36"; in a 19-3/4" depth.

• Powerful 500 CFM internal blower.

• Bright dual halogen lighting; 3-intensity settings (lamps included).

• 3-Speed electronic push button control

• Quick release aluminum mesh filters.

• Designed to work with Broan Automatic Make-up air dampers.

• Heat Sentry™ detects excessive heat and adjusts blower speed automatically.

• Telescopic flue accommodates ceiling heights 8' to 9'; custom lengths upon demand.

6-7/8"

25-3/8

with blue speed selection indication.

• Control features include Delay-off and Filter clean reminder.

• Optional Remote Control Operation—BCR1.

29-15/16", 35-15/16"

Range Hood Specifications Optional Accessories

STAINLESS

WIDTH

STEEL BLOWER VOLTS AMPS CFM SONES DUCT

30" EW5830SS Internal 120 3.05 500/200 10.5/2.5 6" RD FXNE58SS RKE58 FILTERE56 BCR1 MD6T, MD8T 36" EW5836SS Internal 120 3.05 500/200 10.5/2.5 6" RD FXNE58SS RKE58 FILTERE56 BCR1 * Optional ﬂue extension for 10' ceiling. Extensions for ceilings of 10'–12' have up to a 14 week order time. *Optional ﬂue extension for either ducted or non-ducted 9 to 10' ceilings. **Includes non-ducted ﬁlter & ﬂex duct.

• Contemporary Italian Glass Canopy design.

• Available in brushed stainless steel.

• Two widths 30" & 35-7/16"; in a 19-3/4" depth.

• Powerful 500 CFM internal blower.

• Bright dual halogen lighting;

• Quick release aluminum mesh filters.

• Designed to work with Broan Automatic Make-up air dampers.

• Heat Sentry™ detects excessive heat and adjusts blower speed automatically.

• Telescopic flue accommodates ceiling heights 8' to 9'; custom lengths upon demand.

3-intensity settings (lamps included).

• 3-Speed electronic push button control with blue speed selection indication.

• Control features include Delay-off and Filter clean reminder.

• Optional Remote Control Operation—BCR1.

FLUE

EXTENSION*

NON-DUCTED

KIT**

NON-DUCTED

FILTER

Ducted

Non-Ducted

– 38-3/8

– 41-1/4

22-1/2

26-7/8

29-7/8", 35-1/4"

20-1/4

22-1/2

REMOTE

CONTROL

10-5/8"

10-1/2"

MAKE-UP

AIR DAMPER

MD6T, MD8T

Ducted

Non-Ducted

– 39

– 42-3/8

29-1/2

29-3/4

Chimney Hoods

Range Hood Specifications Optional Accessories

WIDTH

STAINLESS

STEEL BLOWER VOLTS AMPS CFM SONES DUCT

30" EW5630SS Internal 120 2.88 500/200 10.5/2.5 6" RD FXNE56SS RKE56 FILTERE56FL BCR1 MD6T, MD8T 35-7/16" EW5636SS Internal 120 2.88 500/200 10.5/2.5 6" RD FXNE56SS RKE56 FILTERE56FL BCR1 * Optional ﬂue extension for 10' ceiling. Extensions for ceilings of 10'–12' have up to a 14 week order time. *Optional ﬂue extension for either ducted or non-ducted 9 to 10' ceilings. **Includes non-ducted ﬁlter & ﬂex duct.

• Multi-speed slide control.

• 370 CFM internal blower (<300 CFM with ARP6).

• Heat Sentry™ detects excessive heat and adjusts blower speed to high automatically.

• Two 25 watt halogen lamps included (one level).

• Dishwasher-safe aluminum filters feature a quick-release latch and

8 to 9 feet. Flue extensions for higher ceilings are also available for ducted and non-ducted applications.*

• Requires separate purchase of a non-ducted kit (RRK51) for indoor exhaust recirculation.

• Install hood so that the bottom of the unit is 24 to 30 inches above the cooking surface. Mounting height is determined by ceiling height.

professional-style appearance.

• Ducted/non-ducted telescopic flue accommodates ceiling heights from

FLUE

EXTENSION*

NON-DUCTED

KIT**

NON-DUCTED

FILTER

REMOTE

CONTROL

MAKE-UP

AIR DAMPER

MD6T, MD8T

Range Hood Specifications Optional Accessories

STAINLESS FLUE NON-DUCTED NON-DUCTED NON-DUCTED MAKE-UP WIDTH STEEL VOLTS AMPS CFM SONES DUCT EXTENSION* FLUE EXTENSION* KIT** FILTER AIR DAMPER

30" RM533004 120 2.6 370+ 7.0 6" RD RFX5304 RFXN5304 RRK51 FILTERSQUARE MD6TU, MD8TU 36" RM533604 120 2.6 370 42" RM534204 120 2.6 370

* Optional ﬂue extension for 10' ceiling—extensions over 10' have up to a 14-week order time. ** Includes non-ducted ﬁlter.

299 CFM max with ARP6 reducer plate option.

7.0 6" RD RFX5304 RFXN5304 RRK51 FILTERSQUARE MD6TU, MD8TU

Page 14

Chimney Hoods

Broan Elite RM52000

A sleek look that’s simply elegant.

Combines graceful curves and traditional European styling.

Rangemaster

Broan Elite RM51000

Rangemaster

Hand-rolled. European craftsmanship. Sleek, graceful curves engineered to meet the requirements of today’s appliances and kitchens.

Broan Elite RM50000

Rangemaster

Beautiful, yet attainable. European design with tremendous value to meet the requirements of today’s conventional appliance and kitchen styles.

Page 15

• Multi-speed slide control.

• 370 CFM internal blower (<300 CFM with ARP6).

• Heat Sentry™ detects excessive heat and adjusts blower speed to high automatically.

• Two 20-watt halogen lamps included (one level).

• Dishwasher-safe aluminum filters

higher ceilings are also available for ducted and non-ducted applications.*

• Requires separate purchase of a non-ducted kit (RRK51) for indoor exhaust recirculation.

• Install hood so that the bottom of the unit is 24 to 30 inches above the cooking surface. Mounting height is determined by ceiling height.

feature a quick-release latch and professional-style appearance.

• Ducted/non-ducted telescopic flue accommodates ceiling heights from 8 to 9 feet. Extension flues for

Range Hood Specifications Optional Accessories

STAINLESS FLUE NON-DUCTED NON-DUCTED NON-DUCTED MAKE-UP WIDTH STEEL VOLTS AMPS CFM SONES DUCT EXTENSION* FLUE EXTENSION KIT+ FILTER AIR DAMPER

30" RM523004 120 2.6 370** 7.0 6" RD RFX5204 RFXN5204 RRK51 FILTERSQUARE MD6TU, MD8TU 36" RM523604 120 2.6 370** 7.0 6" RD RFX5204 RFXN5204 RRK51 FILTERSQUARE MD6TU, MD8TU 42" RM524204 120 2.6 370** 7.0 6" RD RFX5204 RFXN5204 RRK51 FILTERSQUARE MD6TU, MD8TU

* Optional ﬂue extension for 10' ceiling—extensions over 10' have up to a 14-week order time. **299 CFM max with ARP6 reducer plate option.

Includes non-ducted ﬁlter.

Chimney Hoods

• Multi-speed slide control.

• 370 CFM internal blower (<300 CFM with ARP6).

• Heat Sentry™ detects excessive heat and adjusts blower speed to high automatically.

• Two 20-watt halogen lamps included (one level).

• Dishwasher-safe aluminum filters

higher ceilings are also available for ducted applications.*

• Requires separate purchase of a non-ducted kit (RRK51) for indoor exhaust recirculation.

• Install hood so that the bottom of the unit is 24 to 30 inches above the cooking surface. Mounting height is determined by ceiling height.

22-7/8"

feature a quick-release latch and professional-style appearance.

• Ducted/non-ducted telescopic flue accommodates ceiling heights from 8 to 9 feet. Extension flues for

Range Hood Specifications Optional Accessories

STAINLESS FLUE NON-DUCTED NON-DUCTED MAKE-UP WIDTH STEEL VOLTS AMPS CFM SONES DUCT EXTENSION* KIT+ FILTER AIR DAMPER

357⁄16" RM519004 120 2.6 370** 7.0 6" RD RFX5104 RRK51 FILTERSQUARE MD6TU, MD8TU

* Optional ﬂue extension for 10' ceiling—extensions over 10' have up to a 14-week order time. ** 299 CFM max with ARP6 reducer plate option.

Includes non-ducted ﬁlter.

• Multi-speed slide control and integrated dual light assembly.

• 290 CFM internal blower.

• Heat Sentry™ detects excessive heat and adjusts blower speed to high automatically.

• Dual 40-watt incandescent lamps included (one level).

• Dishwasher-safe aluminum filter features a quick-release latch and professional style appearance.

• Includes non-ducted kit and charcoal filter for indoor exhaust recirculation.

• Ducted/non-ducted telescopic

flue accommodates ceiling heights from 8 to 9 feet. Extension flues for higher ceilings are also available.*

• Non-ducted flue extensions available in stainless steel only.

• Install hood so that the bottom of the unit is 24 to 30 inches above the cooking surface. Mounting height is determined by ceiling height.

• ENERGY STAR® version on pg 20–21

min 30" - max 45"

Range Hood Specifications Optional Accessories

FLUE EXTENSION* STAINLESS EXTENSION AVALIABLE IN NON-DUCTED WIDTH STEEL WHITE BLACK VOLTS AMPS CFM SONES DUCT STAINLESS STEEL WHITE BLACK STAINLESS STEEL ONLY FILTER

30" RM503004 RM503001 RM503023 120 2.9 290 6.5 6" RD RFX5004 RFX5001 RFX5023 RFXN5004 FILTEREB40

⁄16" RM503604 RM503601 RM503623 120 2.9 290 6.5 6" RD RFX5004 RFX5001 RFX5023 RFXN5004 FILTEREB40

* Optional ﬂue extension for 10' ceiling—extensions over 10' have up to a 14-week order time.

Includes non-ducted ﬁlter.

NON-DUCTED FLUE

Page 16

Downdrafts

Broan Elite RMDD Downdraft System

Ready where and when you need it. Rises to new heights to

meet the needs of high-end commercial style cooking.

• Compact design is installed directly behind the cooktop for an unobtrusive appearance. Thin profile saves precious space under the cabinet.

• Chimney rises over 91⁄2" when activated, ideal for large pots and pans.

• Infinitely adjustable control is designed to provide convenient access to govern the blower speed for effective and quiet operation.

• Optional remote control will activate downdraft from an alternate location.

• Heat Sentry™ detects excessive heat and adjusts blower speed to high automatically.

• Dishwasher-safe filters are easy to

Range Hood Specifications Optional Accessories

BLOWER BLOWER REMOTE MAKE-UP WIDTH INTERNAL EXTERNAL† BUTTON KIT AIR DAMPER

30" RMDD3004 RMDD3004EX RMDDRBK MD6TU, MD8TU 36" RMDD3604 RMDD3604EX RMDDRBK MD6TU, MD8TU 48" RMDD4804 RMDD4804EX RMDDRBK MD6TU, MD8TU

†

External and In-Line blowers sold separately.

remove and feature a stylish brushed stainless steel appearance for a professional look.

• These units are not for installations behind ovens.

• Internal 500 CFM centrifugal blower (<300 CFM with ARP310) or choice of eight External blower options: four Exterior blowers from 600 to 1500 CFM, or four In-Line blowers from 280 to 1100 CFM. See page 45.

• Unique ducting capability allows the internal or remote blower connection to be ducted to the left, right or downward.

Rangemaster

RMDDRBK Remote Control

Optional remote control will activate downdraft from an alternate location.

System Specifications

BLOWER VOLTS AMPS CFM DUCT

INTERNAL 120 4 500* 3¼" x 10" EXTERNAL

*299 CFM max with ARP310 reducer plate option.

†

120 6 — 3¼" x 14"

Page 17

Downdrafts

Model 28000 Use with 900 CFM Exterior blower (Model 332H) or In-Line blower.

Range Hood Specifications

TO FIT NOMINAL COOKTOP SIZE MODEL DESCRIPTION COVER COLOR

30" 273003 Internal Blower Unit Stainless Steel 36" 273603 Internal Blower Unit Stainless Steel 30" 283003 External Blower Unit* Stainless Steel 36" 283603 External Blower Unit* Stainless Steel 30" 273001C Optional Cover White 36" 273601C Optional Cover White 30" 273002C Optional Cover Bisque/Biscuit 36" 273602C Optional Cover Bisque/Biscuit 30" 273023C Optional Cover Black 36" 273623C Optional Cover Black

Broan 27000/28000 Series

For the unique demands of cooktops in islands and peninsulas.

Model 27000 Includes 500 CFM Internal blower (<300 CFM with ARP310).

•

MODEL VOLTS AMPS CFM DUCT

27000 120 4 500+ 3¼" x 10" 28000 120 6.0 max * 3¼" x 10"

299 CFM max with ARP310 reducer plate option. * External unit utilizes model 332H Exterior-mounted blower. In-Line blower sold separately. ** Cooktops, countertops and cabinets vary in dimension and support systems depending upon manufacturer.

These factors may impact the Eclipse’s ability to ﬁt with ever y worktop/cabinet combination. Speciﬁcations subject to change without notice.

†

The model 28000 requires transitioning from 31⁄4" x 10" to 10" round for connection to the External blower.

•

Stainless Steel cover standard. White, Bisque or Black optional.

Convenient options help assure a custom fit.

• Innovative downdraft system is compatible with virtually all self-contained cooktops.

• Sleek, trim styling complements any cooktop style or color.

• Automatically raises into position with the touch of a button. Disappears flush with cooktop surface.

• Space-saving design lets you make the most of precious, under-counter cabinet space.

• Infinitely adjustable speed control is flush with the side of the unit; inconspicuous, yet easy to reach and simple to use.

• Model 27000 Blower discharges right, left or down and slides side-to-side

†

to ease installation.

• These units are not for installations behind ovens.

Eclipse

Page 18

Power Packs

Broan Elite Custom Power Pack RMP1/RMPE

The Broan Elite Custom Power Pack is designed to fit flush with the bottom of a cabinet or custom hood that’s 30" to 48" wide. The 400 CFM centrifugal blower is combined with a multi-speed control to provide quiet, effective performance. Halogen lighting complements the beauty of a fully enclosed bottom containing dishwasher-safe filters.

Liner is 4" in depth

Liners for RMP1/RMPE Power Pack

Broan Elite Liners provide a beautiful way to finish your custom hood and protect your cabinetry. Designed to work with Broan Elite Pro-Insert and Power Packs, liners feature a 3" adjustable nose to provide application flexibility, and a 4" depth for excellent capture.

• Brushed stainless steel finish.

• Liners protect custom hoods and are available for 30", 36" and 48" widths.

• Two versions for maximum flexibility in depth adjustment: “S” version adjusts 171⁄8"—201⁄8". “L” version adjusts 201⁄8"—231⁄8".

• Liners are based on the outside width of the custom hood.

RML7030S/RML7030L RML7036S/RML7036L RML7048S/RML7048L For RMP17004 and RMPE7004 Packs

Broan Elite RMIP Pro-Style Insert

The Broan Elite RMIP Pro-Style Insert fits flush with the bottom of the cabinet or custom hoods. Centrifugal blowers from 500 to 1500 CFM with multi-speed control provide quiet and effective performance. Halogen lighting complements the beauty of its fullyenclosed, easy-to-clean bottom.

Liner is 4" in depth

Shown with optional baffle filters.

Liners for the RMIP Pro-Style Insert

• Brushed stainless steel finish.

• Liners protect custom hood and are available for 36", 42", 48", 54" and 60" widths.

• Liners allow depth adjustment

• Liners are based on the outside

• All models compliant with

⁄2" to 251⁄2". Fits stock

from 22 24" cabinets.

width of the custom hood.

CA Title 24.

RML3336S/RML3342S For RMIP33

Liner is 4" in depth

RML4548S/RML4554S/RML4560S For RMIP45

Page 19

3/8"

(RMIP33), 44

3/8"

(RMIP45)

1/2"

7/16"

5/8"

3/4"

(RMIP33), 45

3/4"

(RMIP45)

• Multi-speed control.

• Heat Sentry™ detects excessive heat and adjusts blower speed to high automatically.

• 400 CFM internal blower (<300 CFM with ARP6).

• External blower model (RMPE) allows a choice of eight blower options: four Exterior: 600, 900, 1200 or 1500 CFM, or four In-Line: 280, 600, 800 or 1100 CFM.

• Two 50-watt halogen lamps included.

• Dishwasher-safe aluminum filters feature a quick-release latch and professional-style appearance.

• Optional non-ducted filters (FILTEREB40) for indoor exhaust recirculation, some ductwork required (RMP17004 only).

• Install power pack so that the bottom of the unit is 24" to 30" above the cooking surface.

• Optional custom hood liners in 30", 36" and 48" widths.

Range Hood Specifications Optional Accessories

STAINLESS MAKE-UP WIDTH STEEL BLOWER* VOLTS AMPS CFM SONES DUCT FILTER AIR DAMPER

70cm RMP17004• Internal 120 3.5 400+ 9.0 6" RD FILTEREB40 MD6TU, MD8TU 70cm RMPE7004 External† 120 — † 8" RD MD6TU, MD8TU

†

External blowers sold separately.

* All blowers are HVI Certiﬁed.

•

Some ductwork required for RMP1 non-ducted installations.

299 CFM max with ARP6 reducer plate option.

RMPE

Cutout

RMP1

3-S

tep power pack and Blower Selection Guide

1. Select a Power Pack system

RMP17004, 400+ CFM Internal blower

• 279⁄16" width, 111⁄4" depth RMPE7004, 280–1500 CFM External blower options

• 279⁄16" width, 111⁄4" depth

2. Select a Liner to fit your cabinetry

If the cabinet/hood inside depth is 18"–21", choose model:

• RML7030S for 30" width

• RML7036S for 36" width

• RML7048S for 48" width

If the cabinet/hood inside depth is 21"–24", choose model:

• RML7030L for 30" width

• RML7036L for 36" width

• RML7048L for 48" width

3. Select an Internal or External Blower

RMP17004, Internal 400 CFM blower is included RMPE7004, External blower options (choose one):

Exterior blowers (outside, roof or wall):

• 331H (600 CFM)*

• 332H (900 CFM)*

• 335 (1200 CFM)*

• 336 (1500 CFM)*

In-Line blowers (inside, attic or other space):

• HLB3 (280 CFM)*v

• HLB6 (600 CFM)*

• HLB9 (800 CFM)*

• HLB11 (1100 CFM)*

* 8"–10" transition (model 414) is required for the Exterior

or In-Line models.

Power Packs

• Brushed stainless steel finish.

• Design allows use with custom liners or Broan Elite Pro-Style Insert liners (sold separately).

• Pro-Style Insert available in 33" and 45" widths.

• Variable speed control for quiet operation.

• Optional remote wall control available.

™

• Heat Sentry

detects excessive heat and

adjusts blower speed to high automatically.

• Dishwasher-safe stainless steel/aluminum filters, or optional baffle filters.

• Bright halogen lighting, two 50-watt lamps (RMIP33) or three 50-watt lamps (RMIP45), bulbs not included.

• Choose 460 (<300 CFM with ARP310) or 850 CFM Internal, or choiceof eight External blower options: four Exterior: 600, 900, 1200 or 1500 CFM, or four In-Line: 280, 600, 800 or 1100 CFM. All blowers sold separately.

• Optional liners in 36", 42", 48" and 60" widths protect custom hoods.

Range Hood Specifications Optional Accessories

BAFFLE MAKE-UP MODEL WIDTH BLOWER* CFM▲ SONES FINISH FILTER KIT AIR DAMPER

RMIP33 33¾"

External * 430 Brushed Stainless MD6TU, MD8TU

RMIP45 45¾" External * 430 Brushed Stainless MD6TU, MD8TU

* All blowers must be purchased separately and are HVI Certiﬁed. See blower speciﬁcations table on page 43.

▲

All ratings for ver tical duct only.

299 CFM max with ARP310 reducer plate option.

Internal 460+ (P5), 850 (P8) 10.5 430 Brushed Stainless RBFIP33 MD6TU, MD8TU

Internal 460

(P5), 850 (P8) 10.5 430 Brushed Stainless RBFIP45 MD6TU, MD8TU

RMIPWC Optional Wall Control for RMIP

Remote wall control provides both variable speed and light control from a more convenient location. Designed to work with the RMIP Pro-Style Insert only.

3-S

tep inSert

& B

lower Selection Guide

1. Select the right size Pro-Style Insert

• RMIP33 (33" width) or RMIP45 (45" width)

• Both feature an 187⁄16" depth

• 460+ or 850 CFM Internal blower options

• 280–1500 CFM External blower options

2. Select a Liner to fit your cabinetry

For cabinet/hood inside depths of 23"–26" choose:

• RML3336S 36" width, use with RMIP33

• RML3342S 42" width, use with RMIP33

• RML4548S 48" width, use with RMIP45

• RML4554S 54" width, use with RMIP45

• RML4560S 60" width, use with RMIP45

3. Select a blower for your Insert

Internal blowers:

• P5 (460 CFM)

• P8 (850 CFM)

Exterior blowers (outside, roof or wall):

• 331H (600 CFM)*

• 332H (900 CFM)*

• 335 (1200 CFM)*

• 336 (1500 CFM)*

In-Line blowers (inside, attic or other space):

• HLB3 (280 CFM)*

• HLB6 (600 CFM)*

• HLB9 (800 CFM)*

• HLB11 (1100 CFM)*

* 332KR Rough-In Kit is required when used with Exterior and

In-Line blower options above (purchased separately).

Page 20

Power Packs

Custom Hood Kit

Ultimate ventilating solution for custom range hood designs.

The Custom Hood Kit is the perfect match of high performance ventilation and adjustable construction.

Custom Hood Power Packs and Modules

High-performance ventilation solutions.

These integrated units provide the ventilation and lighting you need for your custom application.

Model PM390 shown.

PM390 & PM250 Liners

Broan “T” and “B” liners provide an elegant way to finish a traditional wood hood and protect cabinetry. They feature a durable silver painted finish and a 4" depth for good capture. Hemmed edges hide exposed edges, and pre-drilled mounting holes make installation easy.

LT30 & 36 “T” liners work with wood hoods that are integrated with adjacent 12" deep cabinets.

LB30 & 36 “B” (box) liners fit into 18" deep

wood hoods or cabinet bottoms.

Page 21

• Fits into custom cabinetry from 30" to 42" wide.*

• Powerful, quiet 360 CFM/5.0 sone performance (vertical discharge only).

• 24" fluorescent tube lighting (bulb not included).

• Heat Sentry™ detects excessive heat and adjusts blower speed to high automatically.

• For ducted installations, includes damper/adapter for 31⁄4" x 10" duct.

• Must order model 103123 Rough-In Kit.

Range Hood Specifications Optional Accessories

ROUGH-IN FLUORESCENT EXTENSION MAKE-UP MODEL VOLTS AMPS SONES CFM DUCT KIT BULB KIT AIR DAMPER

103023** 120 3.7 5.0 360 31⁄4

Fluorescent Tube: 24", F20T12 (not included). * For installations up to 36" order extension kit No. 97009790. ** Duct vertical only.

" x 10" 103123 F20T12 97009790 MD6TU, MD8TU

Power Packs

MODEL PM390

• Silver paint finish.

• Three speed, slide control.

• Heat Sentry™ detects excessive heat and adjusts speed automatically.

• Quiet centrifugal blower, 390 CFM, vertical discharge (<300 CFM with ARP6).

• Dual 40-watt lamps (Purchase separately).

• Dishwasher safe aluminum filter.

• For ducted installations, includes adapter and damper for 6" round duct.

• Optional non-ducted filter kit (Purchase separately).

• Works with optional custom hood liners in 30", 36", “Box” or “T” design.

• ENERGY STAR® version on pg 20–21.

MODEL PM250

• Silver paint finish.

• Two speed motor, rocker control.

• Efficient 250 CFM fan (vertical discharge).

• Dual 40-watt lighting (Purchase lamps separately).

• Dishwasher safe aluminum filter.

• For ducted installations, built-in adapter for 7" round duct.

• Optional non-ducted filter kit (Purchase separately).

• Works with optional custom hood liners in 30", 36", “Box” or “T” design.

Power Pack and Power Module Specifications Optional Accessories

NON-DUCTED ALUMINUM CHARCOAL MAKE-UP SILVER WHITE BLACK VOLTS AMPS SONES CFM DUCT KIT+ FILTER FILTER 30" LINERS 36" LINERS AIR DAMPER

PM390 – – 120 2.9 6.0 390* 6" RD 357NDK 99010370 B08999040 LT30 or LB30 LT36 or LB36 MD6TU, MD8TU PM250 – – 120 2.1 8.0 250 7" RD 356NDK 99010370 B08999040 LT30 or LB30 LT36 or LB36 MD6TU, MD8TU

Includes charcoal ﬁlter. Some duct work is required for non-ducted applications.

* 299 CFM max with ARP310 reducer plate option.

MODEL 356NDK MODEL 357NDK

Depending on your installation of the non-duct system, you may need additional duct or duct components (ie elbows).

Page 22

ENERGY STAR

Choose from a full line of

ENERGY STAR® qualified

range hoods from the experts!

Broan® introduced the first ENERGY STAR® qualified range hoods with the QDE Series. Now, we’re growing our ENERGY STAR® range hood family with four new designs. All meet Green Building program requirements from

USGBC, and compact fluorescent lighting. What’s more, all are certified by HVI (Home Ventilating Institute) so you know you have a powerful hood. Save energy—and money—with ENERGY STAR ENERGY STAR

LEED,® NAHB and ENERGY STAR® with energy-efficient motors

qualified range hoods from Broan.

is a registered mark owned by the U.S. government.

Page 23

Broan Elite RME50000

Rangemaster

Beautiful, yet attainable.

European design with tremendous value to meet the requirements of today’s conventional appliance and kitchen styles.

• Three-speed slide control and integrated dual fluorescent light assembly.

• 290 CFM at maximum speed.

• 0.5 Sones at normal (135 CFM).

• Heat Sentry™ detects excessive heat and adjusts blower speed to high automatically.

• Dual 13-watt fluorescent lamps included (one level).

• Dishwasher-safe aluminum filter features a quick-release latch and professional style appearance.

• Ducted telescopic flue accommodates ceiling heights from 8 to 9 feet. Extension flues for higher ceilings are also available.*

• Install hood so that the bottom of the unit is 24 to 30 inches above the cooking surface. Mounting height is determined by ceiling height.

Range Hood Specifications

WIDTH

30" RME5030SS 120 2.86 0.5 5.5 135/290 6" RD

* Optional ﬂue extension for 10' ceiling—extensions over 10' have up to a 14-week order time.

STAINLESS

STEEL VOLTS AMPS

SONES NORMAL SETTING

SONES

HIGH

SETTING

CFM

NORMAL/HIGH DUCT

ENERGY STAR

Model PME300

ENERGY STAR® efficiency, for custom applications provides the ventilation and lighting you need in one integrated package.

• Silver paint finish.

• Three speed, slide control.

• Heat Sentry™ detects excessive heat and adjusts speed automatically.

• Quiet centrifugal blower, 290 CFM (vertical discharge).

• 0.5 Sones at normal (130 CFM).

• Dual 13-watt fluorescent lamps included.

• Dishwasher safe aluminum filter.

• For ducted installations, includes adapter and damper for 6" round duct.

• Works with optional custom hood liners in 30", 36", “Box” or “T” design.

Optional Accessory

FLUE EXTENSION*

STAINLESS STEEL

RFX5004

* Optional ﬂue extension for 10' ceiling—extensions over 10' have up to a 14-week order time.

Power Pack and Power Module Specifications

SONES

SILVER VOLTS AMPS

PME300 120 2.9 0.5 5.0 130/290 6" RD

NORMAL SETTING

SONES

HIGH

SETTING

CFM

NORMAL/HIGH DUCT

Optional Accessories

ALUMINUM

FILTER 30" LINERS 36" LINERS

B08087694 LT30 or LB30 LT36 or LB36

Page 24

ENERGY STAR

QDE Series

The first ENERGY STAR® range hood on the market.

Compact fluorescent lighting.

APE Series

High performance, professional style ENERGY STAR

Tilt-down compact fluorescent lighting.

range hood.

QSE Series

Allure, America’s contemporary style choice is now available with ENERGY STAR

Tilt-down compact fluorescent lighting.

Page 25

• Two speed rocker switch.

• 290 CFM at maximum speed.

• 0.8 Sones at normal speed (130 CFM).

• Vertical or horizontal discharge (ducted only).

• Dual 13-watt compact fluorescent

• Fully enclosed bottom to aid in trapping grease and contaminants.

• Dishwasher-safe aluminum filters and blower wheel.

• Available in stainless steel, white and black.

bulbs (included).

Range Hood Specifications

STAINLESS WIDTH WHITE BLACK STEEL

30" QDE30WW QDE30BL QDE30SS

SONES NORMAL SONES HIGH CFM VOLTS AMPS SETTING SETTING NORMAL/HIGH DUCT

120 1.6 0.8 5.5 130/290 31⁄4

" x 10"

Includes 3-1/4x10" damper/ adapter

ENERGY STAR

• 9" Pro-style hood height for maximum capture.

• Hidden, variable speed controls with last setting memory.

• 440 CFM at maximum speed.

• 0.7 Sones at normal speed (200 CFM).

• Vertical or horizontal discharge (ducted only). Can be installed as non-ducted (ENERGY STAR void).

bulb (included).

• Convenient 4-watt night-light (bulb included).

• Dishwasher-safe, antimicrobial protected filters.

• Heat Sentry™ detects excessive heat and adjusts speed to high automatically.

• Available in stainless steel finish.

• Bright 26-watt compact fluorescent

Range Hood Specifications Optional Accessory

STAINLESS MAKE-UP WIDTH STEEL AIR DAMPER

30" APE130SS MD6TU, MD8TU

SONES NORMAL SONES HIGH CFM VOLTS AMPS SETTING SETTING NORMAL/HIGH DUCT

120 1.9 0.7 7.0 200/440 3¼" x 10"

• Two speed rocker switch.

• 210 CFM at maximum speed.

• 1.5 Sones at normal speed (110 CFM).

• Vertical or horizontal discharge (ducted only).

• Bright 26-watt compact fluorescent

bulb (included).

• Convenient 4-watt night-light (bulb included).

• Dishwasher-safe aluminum filters.

• Available in stainless steel, white and black.

Includes 3-1/4x10" damper/ adapter

Range Hood Specifications Optional Accessory

STAINLESS 7" ROUND WIDTH WHITE BLACK STEEL DAMPER

30" QSE130WW QSE130BL QSE130SS BP87

SONES NORMAL SONES HIGH CFM VOLTS AMPS SETTING SETTING NORMAL/HIGH DUCT

120 1.8 1.5 5.0 110/210 3¼" x 10" OR 7" RD

Flexible option for ducted installation

• Three way convertible 3-1/4x10" (horizontal and vertical), 7" round (vertical)

• Includes 3-1/4x10" damper/adapter and 7" round adapter

Page 26

High Performance Hoods

E64000 shown with a custom backsplash.

Broan Elite E64000 Series

Professional style that fits under any cabinet.

E64000 shown with non-duct recirculating kit and a custom backsplash.

Broan Elite Options

Adapt to any installation. Quality Broan Elite options let

you create a custom look.

• Restaurant-quality stainless steel backsplash with folddown shelves completes the commercial look and is easy to clean.

• When venting to the exterior is not possible, an optional non-duct kit will filter air through charcoal filters and recirculate it back into the kitchen.

Page 27

True professional style and performance has never been easier to bring home.

• Brushed stainless steel finish.

• Bright halogen lighting with two settings; Two 50-watt bulbs in 30" and 36" widths, Three 50-watt bulbs in 42" and 48" widths (purchase bulbs separately).

• Pro-style, dishwasher-safe baffle filters with removable grease drip rail.

• Variable speed control remembers last setting—blue power-on indicator light.

• Heat Sentry blower speed automatically.

• Designed to duct out of the hood shell in either horizontal or vertical direction with internal blowers. External blowers duct vertically.

• Designed to work with Broan Automatic Make-Up Air Damper.

Internal Blower Specifications

WIDTH

30" E6430SS 600 1.5 2–50W GU10 5.0 3-1/4" x 10" 36" 42" 48" 48" E6448TSS 1200 2.0 3–50W GU10 9.0 4-1/2" x 18"

Sones at high speed for Internal 600–13.5 max; Internal 1200–14.5 max.

Duct adapter & damper is included with the Internal blowers.

◆

120V 60Hz

™

detects excessive heat and adjusts

STAINLESS

STEEL CFM

SONES

NORMAL SETTING1LAMPS

MAX

AMPS◆DUCTING

E6436SS 600 1.5 2–50W GU10 5.0 3-1/4" x 10" E6442SS 600 1.5 3–50W GU10 5.5 3-1/4" x 10" E6448SS 600 1.5 3–50W GU10 5.5 3-1/4" x 10"

High Performance Hoods

External Blower Specifications

STAINLESS

WIDTH

STEEL

CFM

(see page 45) SONES

LAMPS

MAX

AMPS◆DUCTING

30" E64E30SS 280–1500 see below 2–50W GU10 5.5 10" Rd

E64E36SS 280–1500 see below 2–50W GU10 5.5 10" Rd

36"

E64E42SS 280–1500 see below 3–50W GU10 6.0 10" Rd

42"

E64E48SS 280–1500 see below 3–50W GU10 6.0 10" Rd

48"

See page 45 for Exterior (600–1500 CFM) and Inline (280–1100 CFM) blower speciﬁcations.

Sone levels are typically half of comparable CFM internal blowers.

External blower capable models include the 332KR rough-in kit (Purchase blowers separately).

◆

120V 60Hz

E64000 Optional Accessories Selection Table

WIDTH NON-DUCT KIT

30" ANKE60302SS RMP3004 ROUNDFILTER MD6T, MD8T 36" ANKE60362SS RMP3604 ROUNDFILTER MD6T, MD8T 42" ANKE60422SS RMP4204 ROUNDFILTER MD6T, MD8T 48" ANKE60482SS RMP4804 ROUNDFILTER** MD6T, MD8T

† For models with internal blowers only. * Includes non-ducted ﬁlters.

A non-duct kit may be used to recirculate filtered air back into the kitchen if ducting is not practical.

**Requires two packs for 1200 CFM Blower.

†*

BACKSPLASH NON-DUCTED FILTER*

Pro-style, dishwasher-safe baffle filters with removable grease drip rail. Filters feature handles for convenient removal.

MAKE-UP

AIR DAMPER

The professional look is completed with an optional backsplash.

Make-Up Air Damper Model MD6T, MD8T

Page 28

High Performance Hoods

E60000 shown with optional 12" soffit flue.

Broan Elite E60000 Series

Take professional style to new heights.

E60000 shown with non-duct recirculating kit.

Broan Elite Options

Adapt to any installation. Quality Broan Elite options let

you create a custom look.

• Restaurant-quality stainless steel backsplash with fold-down shelves completes the commercial look and is easy to clean.

• Optional matching soffit chimney on the E60000 extends the commercial look in kitchens with ceilings up to 8 feet high.

• When venting to the exterior is not possible, an optional non-duct kit will filter air through charcoal filters and recirculate it back into the kitchen.

Page 29

True professional style and performance has never been easier to bring home.

• Brushed stainless steel finish.

• Bright halogen lighting with two settings; Two 50-watt bulbs in 30" and 36" widths, Three 50-watt bulbs in 42" and 48" widths (purchase bulbs separately).

• Pro-style, dishwasher-safe baffle filters with removable grease drip rail.

• Variable speed control remembers last setting—blue power-on indicator light.

• Heat Sentry™ detects excessive heat and adjusts blower speed automatically.

• Designed to duct out of the hood shell in either horizontal or vertical direction with any blower configuration.

• Designed to work with Broan Automatic Make-up air damper.

Internal Blower Specifications

STAINLESS

WIDTH

STEEL CFM

30" E6030SS 600 1.5 2–50W GU10 5.0 3-1/4" x 10"

E6036SS 600 1.5 2–50W GU10 5.0 3-1/4" x 10"

36"

E6042TSS 1200 2.0 3–50W GU10 9.0 4-1/2" x 18"

42"

E6048TSS 1200 2.0 3–50W GU10 9.0 4-1/2" x 18"

48"

Sones at high speed for Internal 600–13.5 max; Internal 1200–14.5 max.

Duct adapter & damper is included with the Internal blowers.

◆

120V 60Hz

SONES

NORMAL SETTING1LAMPS

MAX

AMPS

◆

DUCTING

10” ROUND DISCHARGE

High Performance Hoods

External Blower Specifications

STAINLESS

WIDTH

STEEL

CFM

(see page 45) SONES

LAMPS

MAX

AMPS◆DUCTING

30" E60E30SS 280–1500 see below 2–50W GU10 5.5 10" Rd

E60E36SS 280–1500 see below 2–50W GU10 5.5 10" Rd

36"

E60E42SS 280–1500 see below 3–50W GU10 6.0 10" Rd

42"

E60E48SS 280–1500 see below 3–50W GU10 6.0 10" Rd

48"

See page 45 for Exterior (600–1500 CFM) and Inline (280–1100 CFM)

blower speciﬁcations.

Sone levels are typically half of comparable CFM internal blowers.

External blower capable models include the 332KR rough-in kit

(Purchase blowers separately).

◆

120V 60Hz

E60000 Optional Accessories Selection Table

WIDTH NON-DUCT KIT†*12" SOFFIT FLUE COVER BACKSPLASH NON-DUCTED FILTER*

30" ANKE60302SS AEE60302SS RMP3004 ROUNDFILTER MD6T, MD8T 36" ANKE60362SS AEE60362SS RMP3604 ROUNDFILTER MD6T, MD8T 42" ANKE60422SS AEE60422SS RMP4204 ROUNDFILTER** MD6T, MD8T 48" ANKE60482SS AEE60482SS RMP4804 ROUNDFILTER** MD6T, MD8T

† For models with internal blowers only. * Includes non-ducted ﬁlters.

A non-duct kit may be used to recirculate filtered air back into the kitchen if ducting is not practical.

**Requires two packs for 1200 CFM Blower.

Pro-style, dishwasher-safe baffle filters with removable grease drip rail. Filters feature handles for convenient removal.

MAKE-UP

AIR DAMPER

The professional look is completed with an optional backsplash.

12" SOFFIT FLUE COVER

Make-Up Air Damper Model MD6T, MD8T

Page 30

18 30

High Performance Hoods

Broan Elite Pro Outdoor EPD61 Series

Broan Elite Pro Options

Flue covers are available in corrosion resistant stainless steel and attach to the top of the range hood shell. Flue

covers come in 6", 18" and 30" heights. Deeper flue covers are available for hoods using the 3" wall extension.

Flue Cover Specifications

HEIGHTS

6" for 8' ceiling AEEPD6SS AEEPD6SSE 18" for 9' ceiling AEEPD18SS AEEPD18SSE 30" for 10' ceiling AEEPD30SS AEEPD30SSE

24 - 45

Adjustable 24"–45" for

9.5' to 11.5' ceiling

Flue cover available in corrosion resistant stainless steel.

" "

13", 16"

25"

FLUE COVER 13"

(STANDARD

DEPTH)

AEEPD2445SS AEEPD2445SSE

FLUE COVER 16"

(EXTENDED

DEPTH)

Page 31

Extra deep design and improved performance for best-in-class capture.

• Professional outdoor design.

• Deep 27" depth to handle heat and size of outdoor gas grills (optional 3" wall extension).

• Brushed corrosion resistant stainless steel.

• Two widths: 36" and 48".

• Powerful 1100 CFM internal blower.

• Bright halogen lighting; two in 36", three in 48" model (bulbs not included).

• 3-speed rotary control designed to resist the effects of heat and moisture.

• Stainless steel baffle filters.

• Heat Sentry™ detects excessive heat and adjusts blower speed automatically.

• HVI certified performance.

Range Hood Specifications

STAINLESS

WIDTH

36" EPD6136SS Internal 120 9.0 Max 1100 11.0 10" RD 48" EPD6148SS Internal 120 9.0 Max 1100 11.0 10" RD

STEEL BLOWER VOLTS AMPS CFM SONES DUCT

High Performance Hoods

5½

1100 CFM Internal Blower tested to assure operation in corrosive environments.

Optional Accessory

3" WALL EXTENSION

AWEPD36SS AWEPD48SS

Optional 3" wall extension creates 30" depth for even greater coverage; eliminates expensive custom wall bump-outs

36, 48

Page 32

High Performance Hoods

Broan Elite E661

Ultra Quiet Performance. The clean, smooth design of this range hood fits snugly under cabinets and provides

quiet and effective ventilation.

• Super quiet <0.3 sones at normal speed.

• Enclosed stainless steel bottom with dishwasher-safe aluminum filter with easy release latches.

• Brilliant dual 50-watt halogen lighting (GU10 bulbs included).

• Three-level light settings with last setting memory and transitional theater style lighting. Intensities change gradually.

• Large recessed bottom filter area increases capture.

Range Hood Specifications Optional Accessory

NORMAL+ HIGH+ BOOST+ STAINLESS SETTING SETTING MODE MAKE-UP WIDTH STEEL WHITE BLACK BLOWER VOLTS AMPS CFM/SONES CFM/SONES CFM/SONES DUCT* AIR DAMPER

30" E66130SS E66130WH E66130BL Internal 120 2.4 130/<0.3 310/2.5 600/8.5* 3¼" x 14" MD6TU, MD8TU 36" E66136SS E66136WH E66136BL Internal 120 2.4 130/<0.3 310/2.5 600/8.5* 3¼" x 14" MD6TU, MD8TU 42" E66142SS – – Internal 120 2.4 130/<0.3 310/2.5 600/8.5* 3¼" x 14" MD6TU, MD8TU

* Optional accessory, T461 Adapter 3¼" x 14" to 3¼" x 10" (will reduce CFM a minimum of 100 CFM).

Performance levels are for horizontal discharge (vertical boost 550 CFM).

** 299 CFM max with ARP314 reducer plate option.

• Up to 600 CFM internal blower (31⁄4" x 14" duct, convertible to horizontal or vertical discharge; <300 CFM with ARP314).

• Three-speed plus boost with last setting memory and 5-minute delay off feature.

• Heat Sentry™ detects excessive heat and adjusts blower speed to high automatically.

Page 33

High Performance Hoods

(36”)

(30”)

(42”)

plus greater blower control boasting a 600 CFM blower that is the quietest in the line.

EVOLUTION 4 tops our line with brilliant lighting features,

• Super quiet <0.3 sones at normal speed.

• Brushed Stainless Steel.

• Easy-to-clean, fully-enclosed non-stick bottom pan.

• Dishwasher-safe, quick latch, aluminum premium-mesh filters with antimicrobial coating.

• Soft-touch, four-speed and lighting control

An optional remote control with magnetic base enables operation of blower speed, lighting and delay-off feature from across the room.

panel, green LEDs with clock/timer, delayoff, ambient light sensor and sleep mode.

• Four-speed blower control includes

BCR1

Range Hood Specifications Optional Accessories

*3-1/4"x10" damper/adapter (T461) accessory available (reduces max CFM by 100 CFM).

STAINLESS

WIDTHS

STEEL VOLTS AMPS

30" QP430SS 120 3.5 <0.3 4.5 630

36" QP436SS 120 3.5 <0.3 4.5 630

42" QP442SS 120 3.5 <0.3 4.5 630

SONES NORMAL

SETTING

SONES HIGH

SETTING

boost mode. Delivers 630 CFM.

CFM

BOOST MODE DUCT

3-1/4"x14"*

OR 7" RD.

3-1/4"x14"*

OR 7" RD.

3-1/4"x14"*

OR 7" RD.

REMOTE CONTROL

BCR1

• Optional remote control with blower

• Four Halogen MR16/GU10 50W lamps

• Four-level light settings with theater-style

• Broan Advanced Heat Sentry™ detects

• Compatible with optional make-up air

AIR DAMPER

MD6T, MD8T

Evolution™ 4

speed, lighting and delay on/off control capability (battery included).

(bulbs included).

transitions; plus ambient light sensor that automatically turns lighting on at night.

excessive heat and adjusts blower speed for proper ventilation.

damper accessory.

MAKE-UP

Page 34

Under Cabinet Hoods

Advanced soft-touch digital display.

EVOLUTION™ 3

EVOLUTION 3 has brilliant lighting features, plus greater blower control including a Boost mode that

serious cooks will adore.

• Super quiet <0.3 sones at normal speed.

• Brushed Stainless Steel, Black or White finishes.

• Easy-to-clean, fully-enclosed non-stick bottom pan.

• Dishwasher-safe, quick latch, aluminum premium-mesh filters with antimicrobial coating.

• Soft-touch, four-speed and lighting control panel, green LEDs with clock/timer, delayoff, ambient light sensor and sleep mode.

• Four-speed blower control includes boost

• Optional remote control with blower speed, lighting and delay on/off control capability (battery included).

• Four Halogen MR16/GU10 50W lamps (bulbs included).

• Four-level light settings with theater-style transitions; plus ambient light sensor that automatically turns lighting on at night.

• Broan Advanced Heat Sentry™ detects excessive heat and adjusts blower speed for proper ventilation.

• Compatible with optional make-up air damper accessory.

mode. Delivers 450 CFM.

Range Hood Specifications Optional Accessories

STAINLESS

WIDTHS

*Non-ducted recirculating installation requires optional CleanSense™ charcoal filters, BPPF(30/36/42).

STEEL WHITE BLACK VOLTS AMPS

30" QP330SS QP330WW QP330BL 120 3.3 <0.3 5.0 450

36" QP336SS QP336WW QP336BL 120 3.3 <0.3 5.0 450

42" QP342SS QP342WW QP342BL 120 3.3 <0.3 5.0 450

SONES NORMAL

SETTING

SONES HIGH

SETTING

Ducting: 3-1/4" x 10" (includes damper/adapter), or 7" round (includes adapter). Non-ducted installation requires optional CleanSense™ charcoal filters, purchased separately.

BCR1

CFM

BOOST MODE DUCT

3-1/4"x10"*

OR 7" RD.

3-1/4"x10"*

OR 7" RD.

3-1/4"x10"*

OR 7" RD.

An optional remote control with magnetic base enables operation of blower speed, lighting and delay-off feature from across the room.

REMOTE

CONTROL

BCR1

MAKE-UP

AIR DAMPER

MD6T, MD8T

Page 35

EVOLUTION™ 2

EVOLUTION 2 provides the control, power and lighting you need in four attractive finishes.

• Very quiet 0.6 sones at normal speed.

• Brushed Stainless Steel, Black, White or Bisque finishes.

• Easy-to-clean, fully-enclosed non-stick bottom pan.

• Dishwasher-safe, quick latch aluminum micro-mesh filters with antimicrobial coating.

• Soft-touch lighting and three-speed blower control panel, green LEDs.

• Internal blower delivers 350 CFM.

• Four Halogen MR16/GU10 50W lamps (bulbs included).

• Three-level light settings with theater-style transition.

• Broan Advanced Heat Sentry™ detects excessive heat and adjusts blower speed for proper ventilation.

Range Hood Specifications Optional Accessory

STAINLESS

WIDTHS

*Non-ducted installation requires optional CleanSense

STEEL WHITE BLACK BISQUE VOLTS AMPS

30"" QP230SS QP230WW QP230BL QP230BC 120 2.8 0.6 5.0 350

36" QP236SS QP236WW QP236BL QP236BC 120 2.8 0.6 5.0 350

42" QP242SS QP242WW QP242BL QP242BC 120 2.8 0.6 5.0 350

™

charcoal filters, purchased separately.

Soft-touch electronic control.

SONES NORMAL

SETTING

SONES HIGH

SETTING

CFM

BOOST MODE DUCT

3-1/4"x10"*

OR 7" RD.

3-1/4"x10"*

OR 7" RD.

3-1/4"x10"*

OR 7" RD.

MAKE-UP

AIR DAMPER

MD6TU, MD8TU

Under Cabinet Hoods

EVOLUTION™ 1

EVOLUTION 1 is ideal for those who feel simplicity defines elegance.

• Very quiet 0.8 sones at normal speed.

• Brushed Stainless Steel, Black or White finishes.

• Easy-to-clean, fully-enclosed underside.

• Dishwasher-safe, quick latch aluminum midmesh filters with antimicrobial coating.

• Internal blower delivers 300 CFM.

• Simple, two-speed blower and lighting controls.

• Four Halogen MR16/GU10 35W lamps (bulbs not included).

• Two-level light settings.

For the 42" EVOLUTION 1 refer to the EVOLUTION 2 line art.

Ducting: 3-1/4" x 10" (includes damper/adapter), or 7" round (includes adapter). Non-ducted installation requires optional

™

CleanSense purchased separately.

charcoal filters,

Convenient, two-setting control.

Range Hood Specifications

STAINLESS

WIDTHS

*Non-ducted recirculating installation requires optional CleanSense

STEEL WHITE BLACK VOLTS AMPS

30" QP130SS QP130WW QP130BL 120 2.3 0.8 5.0 300

36" QP136SS QP136WW QP136BL 120 2.3 0.8 5.0 300

42" QP142SS QP142WW QP142BL 120 2.3 0.8 5.0 300

SONES NORMAL

SETTING

™

charcoal filters, BPPF(30/36/42).

SONES HIGH

SETTING

CFM

BOOST MODE DUCT

3-1/4"x10"*

OR 7" RD.

3-1/4"x10"*

OR 7" RD.

3-1/4"x10"*

OR 7" RD.

Page 36

Under Cabinet Hoods

QS3 Series (Allure III)

For unparalleled style, quiet, ease of operation and performance.

The ultimate Allure model, combines features like three-speed electronic control plus boost-speed mode, delay-off and filter cleaning reminder. For the first time anywhere, you can have the easy cleaning of DuPont Teflon

Deluxe glass-look ﬁnish, in matching colors. LED indicators for each speed.

in a range hood.

QS2 Series (Allure II)

Sets new standard for style, quiet and ease of cleaning.

The Allure II provides the style and performance you demand and with DuPont

Teflon

, the easy clean-up you want.

Matte ﬁnish in matching color. LED indicators for each speed.

QS1 Series (Allure I)

The new benchmark in style and value.

The quietest range hood in its category, with revolutionary performance and the brilliance of halogen lighting. This isn’t anything like your Mom’s range hood; it’s the one she wished for.

Rocker controls and nameplate in matching matte colors.

Page 37

• Ultra quiet 0.4 sones at normal speed; extra powerful 430 CFM boost.

• Easy-to-clean DuPont Teflon® bottom pan; fully enclosed design.

• Professional style filters; dishwasher-safe.

• Three-level light settings; dual halogen lamp design (bulbs not included).

• Advanced Heat Sentry™ detects excessive heat and adjusts hood speed for proper ventilation.

Range Hood Specifications Optional Accessories

STAINLESS NON-DUCTED 7" ROUND MAKE-UP WIDTH WHITE BISQUE/BISCUIT ALMOND BLACK STEEL FILTER DAMPER AIR DAMPER

30" QS330WW QS330BC QS330AA QS330BL QS330SS BPSF30 BP87 MD6TU, MD8TU 36" QS336WW QS336BC QS336AA QS336BL QS336SS BPSF36 BP87 MD6TU, MD8TU 42" QS342WW QS342BC QS342AA QS342BL QS342SS BPSF42 BP87 MD6TU, MD8TU

Charcoal ﬁlters (not included) are required for non-ducted applications.

SONES NORMAL SONES HIGH CFM VOLTS AMPS SETTING SETTING BOOST MODE DUCT

120 3 0.4* 4.5* 430* 31⁄4

* Normal setting: 100 CFM, High setting: 300 CFM, sones at Boost: 8.0. Halogen lamps: PAR20 ﬂood

50W maximum (not included).

" x 10" OR 7" RD

Flexible options for any installation

• Four-way convertibility 31⁄4 and vertical), 7" round (vertical) and non-ducted (Non-ducted Clean Sense™ filters purchased separately).

• Includes 3

" x 10" (horizontal

⁄4

" x 10" damper/adapter.

Under Cabinet Hoods

• Very quiet 0.9 sones at normal speed; powerful 300 CFM at high setting (<300 CFM with ARP310).

• Easy-to-clean DuPont Teflon® bottom pan, fully enclosed design.

• Micro-mesh filters, dishwasher-safe.

• Three-level light settings; dual halogen lamp design (bulbs not included).

• Three-speed electronic control.

• Heat Sentry™ detects excessive heat and adjusts blower speed to high automatically.

Range Hood Specifications Optional Accessories

STAINLESS NON-DUCTED 7" ROUND WIDTH WHITE BISQUE/BISCUIT ALMOND BLACK STEEL FILTER DAMPER

30" QS230WW QS230BC QS230AA QS230BL QS230SS BPSF30 BP87 36" QS236WW QS236BC QS236AA QS236BL QS236SS BPSF36 BP87 42" QS242WW QS242BC QS242AA QS242BL QS242SS BPSF42 BP87

Charcoal ﬁlters (not included) are required for non-ducted applications.

SONES NORMAL SONES HIGH CFM VOLTS AMPS SETTING SETTING HIGH DUCT

120 2 0.9 4.5 300* 3¼" x 10" OR 7"RD

Halogen lamps: PAR20 ﬂood 50W maximum (not included). * 299 CFM max with ARP310 reducer plate option.

• Quiet 1.5 sones at normal speed, 220 CFM at high setting.

• Fully enclosed design for easy cleaning.

• Standard large filters, dishwasher-safe.

• Two-level light setting; dual halogen lamp design (bulbs not included).

• Two-speed contoured rocker switch control.

• ENERGY STAR® version on pg 22–23.

Flexible options for any installation

• Four-way convertibility 31⁄4 and vertical), 7" round (vertical) and non-ducted (Non-ducted Clean Sense™ filters purchased separately).

• Includes 3

⁄4

" x 10" damper/adapter.

" x 10" (horizontal

Range Hood Specifications Optional Accessories

STAINLESS NON-DUCTED 7" ROUND WIDTH WHITE BISQUE/BISCUIT ALMOND BLACK STEEL FILTER DAMPER

30" QS130WW QS130BC QS130AA QS130BL QS130SS BPSF30 BP87 36" QS136WW QS136BC QS136AA QS136BL QS136SS BPSF36 BP87 42" QS142WW QS142BC QS142AA QS142BL QS142SS BPSF42 BP87

Charcoal ﬁlters (not included) are required for non-ducted applications.

SONES NORMAL SONES HIGH CFM VOLTS AMPS SETTING SETTING HIGH DUCT

120 1.8 1.5 5.0 220 3¼" x 10" OR 7" RD

Halogen lamps: PAR20 ﬂood 50W maximum (not included).

Flexible options for any installation

• Four-way convertibility 31⁄4

and vertical), 7" round (vertical) and non-ducted (Non-ducted Clean Sense™ filters purchased separately).

• Includes 3

⁄4

" x 10" damper/adapter.

" x 10" (horizontal

Page 38

Under Cabinet Hoods

Full-size filters are also dishwasher-safe.

Compact fluorescent lighting.

QDE Energy Efﬁcient Range Hood

The first ENERGY STAR® qualified range hood on the market.

Leave it to the ventilation experts to develop the first range hood that provides the ventilating power you need while using less energy. The QDE Series does it all, and quietly too, all while meeting Green Building Programs such as USGBC NAHB and ENERGY STAR savings of 564 kWh over comparable standard range hoods.

• Stainless steel, black or white finishes.

• Two speed rocker switch.

• 290 CFM at maximum speed.

• 0.8 sones max at normal speed 130 CFM.

• Acoustic insulation surrounds the motor.

• Vertical or horizontal discharge.

Range Hood Specifications

SERIES WIDTH

QDE 30" QDE30SS QDE30WW QDE30BL 120 1.6 290/130 5.5/0.8 31⁄4 *Rectangular adapter/damper included. **All ratings in horizontal duct position.

STAINLESS

STEEL WHITE BLACK VOLTS AMPS

. And that means you can expect a total lifetime energy

• Dual, compact 13-watt fluorescent bulbs (included) last up to five times longer than incandescent lighting.

• Dishwasher safe aluminum filters and blower wheel.

CFM High/

Low**

, LEED®,

SONES

High/Low** DUCT

"x10"*

Page 39

Optional non-duct recirculating kit available for the AP1 Series.

AP1 Series features variable speed controls with last setting memory.

Under Cabinet Hoods

Antimicrobial Coating

Broan combines antimicrobial protection with advanced AP1 mesh filters for unsurpassed benefits:

• Inhibits the growth of odor causing bacteria so filters stay fresher longer.

• Protects the filter so it stays cleaner in between cleanings.

AP1 and RP1

Hood

NDK358

Non-duct kit

Broan AP1 & RP1 Series

Never before have appearance and value come together so elegantly.

Features common to both models:

• Brushed stainless steel, black, and white finish options.

• 9" Pro-style hood height for excellent capture.

• Hidden controls.

• 30" and 36" widths available.

• Internal 440 CFM centrifugal blower (<300 CFM with ARP310).

• Two-level dual 50-watt maximum halogen lighting (GU10 bulbs purchased separately).

• Heat Sentry

™

is a smart feature that detects excessive heat and adjusts speed to high automatically.

Range Hood Specifications

SERIES WIDTH

AP1

RP1

* 299 CFM max with ARP310 reducer plate option.

STAINLESS

STEEL WHITE BLACK VOLTS AMPS

30" AP130SS AP130WW AP130BL 120 1.9 440/120* 7.0/0.5 3 36" AP136SS AP136WW AP136BL 120 1.9 440/120* 7.0/0.5 3 30" RP130SS RP130WW RP130BL 120 1.9 440/120 7.0/0.5 3 36" RP136SS RP136WW RP136BL 120 1.9 440/120 7.0/0.5 3

AP1 Optional Accessories

NON-DUCT RECIRCULATION

KIT

NDK358 88F MD6TU, MD8TU

NON-DUCTED

FILTER

Presenting Broan’s newest pro-style hoods.

RP1 Series features two-speed rocker switch controls.

• ENERGY STAR

version on pg 22–23.

AP1 features:

• Dishwasher-safe micromesh filters have a special coating to keep the filters looking new over repeated cleanings, and exclusive antimicrobial protection.

• Variable speed blower control.

• Non-duct recirculation kit available with charcoal filters.

RP1 features:

• Dishwasher-safe micromesh filters.

• Two-speed blower control.

MAKE-UP

AIR DAMPER

CFM High/

Low

High/Low DUCT

SONES

⁄4

"x10" "x10" "x10" "x10"

Page 40

Under Cabinet Hoods

Range Hood Specifications Optional Accessories

BISQUE/ STAINLESS WHITE NON-DUCTED MAKE-UP SIZE WHITE BISCUIT ALMOND BLACK STEEL MONOCHROMATIC FILTER AIR DAMPER

30" 883001 883002 883008 883023 883004 883011 97007662 MD6TU, MD8TU 36" 883601 — 883608 883623 883604 — 88F MD6TU, MD8TU 39" 883901* — — — 883904* — MD6TU, MD8TU 42" 884201 — — 884223 884204 — MD6TU, MD8TU 48" 884801* — — 884823 884804 — MD6TU, MD8TU

*Special order models, allow three weeks for order.

SONES CFM VOLTS AMPS VER. HOR. VER. HOR. DUCT

120 4.5 5.5 6.0 360 350 31⁄4

" x 10"

Broan 88000 Series

A simply elegant approach to ventilation.

• Infinite speed slide control with blower memory feature that saves last settings.

• Powerful, quiet 360 CFM, 5.5 sones (vertical discharge) or 350 CFM, 6.0 sones (horizontal discharge) performance, HVI Certified.

• Heat Sentry™ detects excessive heat and adjusts blower speed to high automatically.

• Convertible to ducted or non-ducted operation. Includes 31⁄4" x 10" damper/ adapter (non-ducted filter sold separately).

• Accepts two 75-watt bulbs (not included).

Range Hood Specifications—Special Order Only Optional Accessory

STAINLESS WHITE MAKE-UP WIDTH WHITE BLACK STEEL MONOCHROMATIC AIR DAMPER

30" 893001 893023 893004 893011 MD6TU, MD8TU 36" 893601 893623 893604 — MD6TU, MD8TU 39" 893901 — 893904 — MD6TU, MD8TU 42" 894201 894223 894204 — MD6TU, MD8TU 48" 894801 — 894804 — MD6TU, MD8TU

Special order. Allow 3 weeks for delivery.

SONES CFM VOLTS AMPS VER. HOR. VER. HOR. DUCT

120 6.0 6.0 7.0 460 440 3¼" x 10"

Broan 89000 Series

Contemporary lines for a one-of-a-kind kitchen. Clean lines complement the

contemporary kitchen or boldly contrast the flowing styles of more traditional settings.

• Higher capacity; developed specifically for use with today’s cooktop grills up to 14,000 BTUs.

• 460 CFM, 6.0 sones (vertical discharge) or 440 CFM, 7.0 sones (horizontal discharge) performance, HVI Certified.

• Infinite speed slide control with blower memory feature that saves last settings.

• Standard Heat Sentry™ detects excessive heat and adjusts blower speed to high automatically.

• Designed for either vertical or horizontal ducting. Includes 31⁄4" x 10" damper/adapter.

• Accepts two 75-watt bulbs (not included).

Page 41

Under Cabinet Hoods

Allow 18" minimum from cooking surface to bottom of hood.

Broan Elite 15000

Slides out of sight when not in use.

• Compact, trim styling complements any kitchen.

• Fan and light automatically turn on when you slide out the clear glass visor; shut off when pushed in.

• Energy-efficient, 24" fluorescent light with prismatic glass lens provides bright, even cooktop lighting (bulb not included).

• Dual centrifugal blower, 300 CFM, at a quiet 4.5 sones, HVI Certified.

Range Hood Specifications

WIDTH WHITE BISQUE/BISCUIT BLACK STAINLESS*

30" 153001 — 153023 153004 36" 153601 153602

*Brushed aluminum material.

✝

Available while supplies last.

VOLTS AMPS SONES CFM DUCT BULB**

120 3.7 4.5 300+ 31⁄4

**Bulb not included.

299 CFM max with ARP310 reducer plate option.

✝

153623 153604

• Infinitely adjustable blower control conveniently located up front; features blower memory—when activated, unit automatically “remembers” the last setting you selected.

• Exclusive Heat Sentry™ detects excessive heat and adjusts blower speed to high automatically.

• Includes 31⁄4" x 10" duct adapter with built-in damper.

" x 10" (vert.) F20T12

Page 42

Under Cabinet Hoods

Range Hood Specifications

STAINLESS

WIDTHS

Optional Accessories

STEEL WHITE BLACK VOLTS AMPS

30" QML30SS QML30WW QML30BL 120 1.9 2.0 5.0 130/200

NON-DUCTED

FILTER

BPQTF

SONES NORMAL

SETTING

SONES HIGH

SETTING

CFM

NORMAL/HIGH DUCT

3-1/4"x10"

OR 7" RD.

Broan QML

Sleek, Pro-style under-cabinet canopy range hood with easy to clean, fully enclosed bottom

design and dual halogen lighting that provide brilliant cooktop illumination.

• Quiet 2.0 sones at normal speed, 200 CFM high setting, HVI Certified.

• Hidden, easy-to-use two-speed rocker fan control.

• Dual 35-watt halogen lights provide focused lighting for unmatched cooktop visibility with two level intensity (bulbs not included).

• Fully enclosed bottom design and dishwasher safe filter for easy cleaning.

• Offers four-way convertibility: 3-1/4" x 10" (horizontal and vertical), 7" round (vertical) and non-ducted (non-ducted filters sold separately).

• 3-1/4" x 10" damper/duct connector included.

• 7" round duct adapter plate included.

Range Hood Specifications Optional Accessories

WHITE BISQUE/BISCUIT ALMOND STAINLESS NON-DUCTED 7" ROUND WIDTH MONOCHROMATIC MONOCHROMATIC MONOCHROMATIC BLACK STEEL FILTER DAMPER

30" QT230WW QT230BC QT230AA QT230BL QT230SS BPQTF BP87 36" QT236WW QT236BC QT236AA QT236BL QT236SS BPQTF BP87 42" QT242WW QT242BC QT242AA QT242BL QT242SS BPQTF BP87

VOLTS AMPS SONES VER. CFM DUCT

120 1.7 4.5 200 3¼" x 10" OR 7" RD

Broan QT20000

Combines modern styling and quiet operation. Research shows that most people

use their range hood less frequently because of loud fan noise. That’s why the QT hood was developed.

• Patented air chamber design reduces noise up to 40 percent over conventional hoods; 200 CFM, 4.5 sones (vertical discharge), HVI Certified.

• Convertible versatility. Installs as 31⁄4" x 10" (vertical or horizontal), 7" round (vertical) or non-ducted (non-ducted filter sold separately).

• Infinitely adjustable, rotary speed control.

• Larger filter area captures steam and odors.

• Dual 40-watt lamps increase light distribution; nightlight feature adds safety (lamps not included).

• Includes 31⁄4" x 10" damper/adapter and 7" round adapter.

• 7" round damper optional.

• BP87 damper sold separately.

Page 43

Under Cabinet Hoods

Broan 46000

Variable speed performance. Deluxe performance in an economical package. The infinitely adjustable speed

Range Hood Specifications Optional Accessories

BISQUE/ STAINLESS WHITE* NON-DUCTED 7" ROUND WIDTH WHITE BISCUIT ALMOND STEEL BLACK MONOCHROMATIC FILTER DAMPER

24" 462401 — — 462404 462423* — 41F BP87 30" 463001 463002 463008 463004 463023 463011 41F BP87 36" 463601 463602 463608 463604 463623 — 41F BP87 42" 464201 464202 464208 464204 — — 41F BP87

* Special Order: Allow three weeks for delivery.

control allows you to set the hood speed for the perfect combination of ventilation and quiet.

• 190 CFM, 7.5 sone (31⁄4" x 10") or 220 CFM (7" round), HVI Certified.

• Easily installs as 7" round vertical discharge; 31⁄4" x 10" vertical discharge; 31⁄4" x 10" horizontal discharge or nonducted (non-ducted filter sold separately).

• Rotary, infinitely adjustable fan-speed control.

VOLTS AMPS SONES CFM DUCT

120 2.5 7.5 190 3¼" x 10" 220 or 7" RD

• Up to 75-watt cooktop lighting with protective polymeric lens and two-level light control (bulb not included).

• Includes 31⁄4" x 10" damper/adapter and 7" round adapter.

• 7" round damper optional.

• BP87 damper sold separately.

Page 44

Under Cabinet Hoods

Broan 43000/F40000

Adapt to any installation. These 4-way convertible range hoods will fit into

most all applications. Enclosed light and fan/filter assemblies make for easy cleaning.

43000 Series

• Features enclosed light and fan/filter assembly for easy clean-up.

• 7" round damper optional.

• BP87 dampers sold separately.

• Two-speed, rocker-type fan control.

• Powerful 190 CFM, 7.0 sone (31⁄4" x 10" vertical discharge) or 220 CFM, 8.0 sone (7" round discharge) performance.

• Accepts up to 75-watt light (bulb not included).

• Includes 31⁄4" x 10" damper/adapter and built-in 7" round adapter.

43000 Specifications

VOLTS AMPS SONES VER. CFM DUCT

120 1.8 7 190 3¼" x 10" 8 220 OR 7" RD

Optional Accessories

WHITE BISQUE/BISCUIT ALMOND STAINLESS CHARCOAL 7" ROUND WIDTH MONOCHROMATIC MONOCHROMATIC MONOCHROMATIC STEEL BLACK FILTER DAMPER

30" 433011 433022 433018 433004 433023 BP58 BP87 36" 433611 433622 433618 433604 433623 BP58 BP87

F40000 Series Convertible Range Hoods

• Four-way convertible; installs ducted

⁄4" x 10" (vertical and horizontal),

3 7" round (vertical) and non-ducted (non-ducted filter sold separately).

• 160 CFM, 6.5 sone (31⁄4" x 10" discharge) or 190 CFM (7" round discharge) performance – HVI Certified.

• Accepts up to 75-watt light (bulb not included)

• Dishwasher-safe aluminum grease filter.

• Includes 31⁄4" x 10" damper/adapter and 7" round adapter.

• 7" round damper optional.

• BP87 dampers sold separately.

F40000 Specifications

VOLTS AMPS SONES CFM DUCT

120 2.5 6.5 160 3¼" x 10"

6.5 190 OR 7" RD

4-Way Convertible Optional Accessories

STAINLESS WHITE BISQUE/BISCUIT NON-DUCTED 7" ROUND WIDTH WHITE BISQUE/BISCUIT ALMOND STEEL BLACK MONOCHROMATIC MONOCHROMATIC FILTER DAMPER

24" F402401 F402402 F402408 F402404 F402423 F402411 F402422 41F BP87 30" F403001 F403002 F403008 F403004 F403023 F403011 F403022 41F BP87 36" F403601 F403602 F403608 F403604 F403623 F403611 F403622 41F BP87 42" F404201 F404202 F404208 F404204 F404223 F404211 F404222 41F BP87

Page 45

Broan 42000/40000/37000

Made to exacting standards. Broan range hoods provide the

high quality you expect and the value you demand.

Under Cabinet Hoods

42000 Series

• Installs as 7" round ducted only.

• 190 CFM, 6.0 sone (vertical discharge) performance.

• Dishwasher-safe aluminum grease filter.

• Accepts up to 75-watt light (bulb

42000 Specifications

VOLTS AMPS SONES CFM DUCT

120 2.5 6 190 7" RD

sold separately).

• Built-in 7" adapter included.

• BP87 damper sold separately.

Optional 42000 Series 7" Round Ducted Accessory

WHITE BISQUE/ STAINLESS 7" ROUND WIDTH MONOCHROMATIC BISCUIT ALMOND STEEL BLACK DAMPER

24" 422401 422402 422408 422404 — BP87 30" 423001 423002 423008 423004 423023 BP87 36" 423601 423602 423608 423604 423623 BP87 42" 424201 424202 424208 424204 — BP87

40000 Series

• Installs as 31⁄4" x 10" ducted only.

• 160 CFM, 6.5 sone (vertical or horizontal discharge) performance.

• Dishwasher-safe aluminum grease filter.

40000 Specifications

VOLTS AMPS SONES CFM DUCT

120 2.0 6.5 160 3¼" x 10"

• Accepts up to 75-watt light (bulb sold separately).

• Duct connector with built-in damper included.

40000 Series 3¼" x 10" Ducted

WHITE STAINLESS WIDTH MONOCHROMATIC BISQUE/BISCUIT ALMOND STEEL BLACK

21" 402101 402102 402108 — — 24" 402401 402402 402408 402404 — 30" 403001 403002 403008 403004 403023 36" 403601 403602 403608 403604 403623 42" 404201 404202 404208 — —

Note: The 37000 Series has no fan, light, switches, or knock-outs for electrical or ducting.

37000 Series 6" Shell Only

STAINLESS WIDTH WHITE BISQUE/BISCUIT ALMOND STEEL

24" 372401 — 372408 — 30" 373001 373002 373008 373004 36" 373601 — — 373604

(Utilizes 40000 Series shell, but contains no fan, light or switch knock-outs)

Page 46

Under Cabinet Hoods

Model 413001

Broan 41000 (Non-Ducted Only)

Made to exacting standards. Broan range hoods provide

the high quality you expect and the value you demand.

• Installs as non-ducted only with charcoal filter.

• Accepts up to 75-watt light (bulb sold separately).

Range Hood Specifications (Non-Ducted Only) Optional Accessory

WHITE BISQUE/ STAINLESS CHARCOAL WIDTH MONOCHROMATIC BISCUIT ALMOND STEEL BLACK FILTER

21" 412101 412102 412108 — 412123 41F 24" 412401 412402 412408 412404 — 41F 30" 413001 413002 413008 413004 413023 41F 36" 413601 413602 413608 413604 413623 41F 42" 414201 414202 414208 414204 — 41F

VOLTS AMPS SONES CFM DUCT

120 2.0 N/A N/A Non-Ducted

Page 47

Under Cabinet Hoods

Economy Series. Designed to meet the needs of manufactured housing.

• Installs as 5" round (vertical) ducted only.

• Two-speed fan control.

• Accepts up to 75-watt bulb (bulb not included).

• Requires P85 damper/adapter (purchased separately).

Range Hood Specifications Optional Accessory

WHITE BISQUE/ DAMPER/ WIDTH MONOCHROMATIC BISCUIT ALMOND ADAPTER

30" 523001 523002 523008 P85 36" 523601 — — P85 42" 524201 — — P85

Model 523001

Broan 52000

• Washable aluminum filter.

• Mitered sides and hemmed bottom for safety and good looks.

• 5" round damper optional.

VOLTS AMPS SONES CFM DUCT

120 2 8.0 100 5" RD

Page 48

Broan Accessories

Accessories

Broan Backsplashes

Help keep your kitchen looking like new with a metal backsplash.

• Provides easy clean-up of cooking splatter.

• Durable finish.

• Attractive, appliance-matching colors: Reversible White/Almond, Reversible Bisque (Biscuit)/Black.

• Aluminum or 24-gauge stainless steel.

• Available in 24", 30", 36" or 42" widths; all are 24" high.

• Installs easily with four screws.

Backsplash Options

REVERSIBLE STAINLESS REVERSIBLE WHITE/ALMOND STEEL BISQUE (BISCUIT)/BLACK

24" SP240108 SP2404 SP240223 30" SP300108 SP3004 SP300223 36" SP360108 SP3604 SP360223 42" SP420108 SP4204 SP420223

Retail Replacement Filter Packs

The most popular and commonly used filters are available in consumer-friendly packs. Broan filters are made from the highest quality materials to provide the longest life possible and keep your range hood operating at peak performance. Broan also provides replacement filters for many other brands.

Non-ducted filters should be replaced every 3–6 months or more often if cooking style generates extra grease.

MODEL DESCRIPTION TYPE FITS SERIES

BPAPFA Duct Filter Set (qty 3) Aluminum APE, AP1 BPPF30 Non-ducted Filter Set (qty 2) for 30" EVOLUTION BPPF36 Non-ducted Filter Set (qty 2) for 36" EVOLUTION BPPF42 Non-ducted Filter Set (qty 2) for 42" EVOLUTION BPPFA30 Ducted Filter Set (qty 2) for 30" EVOLUTION BPPFA36 Ducted Filter Set (qty 2) for 36" EVOLUTION BPPFA42 Ducted Filter Set (qty 2) for 42" EVOLUTION BPP2FA30 Ducted Filter Set (qty 2) for 30" EVOLUTION BPP2FA36 Ducted Filter Set (qty 2) for 36" EVOLUTION BPP2FA42 Ducted Filter Set (qty 2) for 42" EVOLUTION BPP3FA30 Ducted Filter Set (qty 2) for 30" EVOLUTION BPP3FA36 Ducted Filter Set (qty 2) for 36" EVOLUTION BPP3FA42 Ducted Filter Set (qty 2) for 42" EVOLUTION BPQDE30 Ducted Filter Set (qty 3) for 30" QDE Series Aluminum QDE BPRPFA Ducted Filter Set (qty 3) Aluminum RP1 BPSF30 Non-Ducted Filter Set (qty 2) for 30" Allure Clean Sense BPSF36 Non-Ducted Filter Set (qty 2) for 36" Allure Clean Sense BPSF42 Non-Ducted Filter Set (qty 2) for 42" Allure Clean Sense BPS1FA30 Ducted Filter Set (qty 2) for 30" Allure I Aluminum QS1 BPS1FA36 Ducted Filter Set (qty 2) for 36" Allure I Aluminum QS1 BPS2FA30 Ducted Filter Set (qty 2) for 30" Allure II Aluminum QS2 BPS2FA36 Ducted Filter Set (qty 2) for 36" Allure II Aluminum QS2 BPS3FA30 Ducted Filter Set (qty 2) for 30" Allure III Aluminum QS3 BPS3FA36 Ducted Filter Set (qty 2) for 36" Allure III Aluminum QS3 BPQTF Non-Ducted Filter Charcoal QT20000, QML BPQTAF Ducted Filter Aluminum QT20000, QML 88F Non-Ducted Filter Charcoal 88000 76F Non-Ducted Filter Charcoal 76000, 75000 41F Non-Ducted Filter Charcoal 11000, 41000, F40000, 46000 BP29 Ducted Filter Aluminum 11000, 40000, F40000, 42000, 46000, 52000 BP58 Non-Ducted Replacement Pack (qty 3) Charcoal pad 43000 BP57 Ducted Filter with Charcoal Pad Aluminum with Light Lens 43000 RBFIP33 Bafﬂe Filter Kit for RMIP33 Stainless Steel RMIP33 RBFIP45 Bafﬂe Filter Kit for RMIP45 Stainless Steel RMIP45 FILTERE56 Non-ducted Filter Charcoal EI59, EW58, EW56 FILTEREB40 Non-Ducted Filter, Broan Elite Charcoal RM50000, RMP17004 FILTERSQUARE Non-Ducted Filter, Broan Elite Charcoal RM51000, RM52000, E55000, E54000, RM53000 ROUNDFILTER Non-Ducted Filter, Broan Elite Charcoal 61000, E60000, E64000

™

Clean Sense™ Charcoal w/ Indicator QP1, QP2, QP3

™

Clean Sense™ Charcoal w/ Indicator QP1, QP2, QP3

™

Clean Sense™ Charcoal w/ Indicator QP1, QP2, QP3 1 Aluminum QP1 1 Aluminum QP1 1 Aluminum QP1 2 Aluminum QP2 2 Aluminum QP2 2 Aluminum QP2 3, 4 Aluminum QP3, QP4 3, 4 Aluminum QP3, QP4 3, 4 Aluminum QP3, QP4

™

Charcoal w/ Indicator QS1, QS2, QS3

™

Charcoal w/ Indicator QS1, QS2, QS3

™

Charcoal w/ Indicator QS1, QS2, QS3

Page 49

AC Cord

Kit

Ducting Installation Accessories

Stock No. Stock No.

Wall Hanging Kit—for mounting hoods to wall

when not hung from overhead cabinets. Designed for use with 88,000 46,000 42,000 41,000 40,000 series.

HCK44 HCK44 (10-pack) Electric cord connections kit

SHCK44 (Single-pack) Electric cord connections kit

332KR Rough-In Kit, 10" round duct.

634

Paintable roof cap with backdraft damper and bird screen; 3

⁄4" x 10" or up to 8" round duct.

Black finish.

644

Aluminum roof cap with backdraft damper and bird screen; 3

⁄4" x 10" or up to 8" round duct.

Natural finish.

437

High-capacity roof cap–up to 1200 CFM exhaust.

411 31⁄4" x 10" to 6" round transition.

412H 3

T460 3

413 3

459 3

T462 3

T461 3

414 8" to 10" expander.

T487 8" to 7" reducer.

423 Vertical transition; 41⁄2" x 181⁄2" to 10" round.

424 Rear transition; 41⁄2" x 181⁄2" to 10" round.

⁄4" x 10" to 7" round transition.

⁄4" x 14" to 7" round transition.

⁄4" x 10" to 8" round transition.

⁄4" x 14" to 8" round transition.

⁄4" x 14" to 6" round transition.

⁄4" x 14" to 31⁄4" x 10" transition.

Accessories

611 Aluminum roof cap for flat roofs, 8" round duct.

612

639

WC638

649

641

641FA

647

Aluminum roof cap for flat roofs, 10" round duct.

Paintable wall cap with backdraft damper and bird screen; 3

Aluminum wall cap with backdraft damper and bird screen; 3

⁄4" x 10" duct. Black finish.

⁄4" x 14" duct. Black finish.

⁄4" x 10" duct. Natural finish.

Aluminum wall cap for 6" round duct, with backdraft damper and bird screen.

Aluminum fresh air inlet wall cap for 6" round duct.

Aluminum wall cap for 7" round duct, with damper and bird screen.

610FA 10" Aluminum Fresh air inlet.

643 Aluminum wall cap; 8" round duct with damper.

643FA

441

457K

Aluminum fresh air inlet wall cap for 8" round duct.

Wall cap with gravity damper; 13

⁄8" sq. fits 10"

round duct.

Horizontal twin duet kit, for direct horizontal discharge of RM326H Internal blower.

P85 5" vertical discharge damper.

BP87 7" vertical discharge damper.

BP87Q 7" round discharge damper.

97 7" spring-loaded, In-Line damper.

438 8" round section with In-Line damper.

421 10" vertical discharge In-Line damper.

427

453

454

Thin wall horizontal transition; 4 to 10" round.

Horizontal left transition; 41⁄2" x 181⁄2" to 10" round (right-end boot).

Horizontal right transition;

⁄2" x 181⁄2" to 10" round (left-end boot).

889 31⁄4" x 10" duct; 2' section.

406 6" round duct; 2' section.

407 7" round duct; 2' section.

408 8" round duct; 2' section.

410 10" round duct; 2' section.

428 31⁄4" x 10" vertical elbow.

429 31⁄4" x 10" horizontal elbow.

430

431

Short eave elbow for 3 with backdraft damper and grill.

Long eave elbow for 3 with backdraft damper and grill.

⁄4" x 10" duct

419 6" adjustable elbow (individual).

415 7" adjustable elbow (carton of four).

432 8" adjustable elbow (individual).

418 10" adjustable elbow (individual).

MD6S

MD8S

MD10S

MD6T

MD8T

MD10T

MD6TU

MD8TU

MD10TU

6" Slave Make-Up Air Damper.

8" Slave Make-Up Air Damper.

10" Slave Make-Up Air Damper.

6" Broan Make-Up Air Damper.

8" Broan Make-Up Air Damper.

10" Broan Make-Up Air Damper.

6" Universal Make-Up Air Damper.

8" Universal Make-Up Air Damper.

10" Universal Make-Up Air Damper.

⁄2" x 181⁄2"

Page 50

Blowers

External, Exterior Blowers

Our Exterior blowers offer you powerful ventilation performance at its very quietest, and something you won’t find anywhere else—Broan quality.

Model 331H/332H

• Reduce kitchen noise by locating your range hood blower outdoors.

• For use with our professional style Broan Elite E64000, E60000 and EX Series chimney hoods, downdrafts, RMPE Power Pack and RMIP Inserts.

• Ideal for custom hoods—use the 72W (6 amp variable speed) wall control for remote control of External blowers.

• The 332H is recommended for the Eclipse downdraft.

• Residential design fits unobtrusively on home exterior.

• Durable, weather-resistant, all-aluminum construction that mounts on the roof or outside wall.

• Safety screen keeps small animals and debris away from blower and motor.

External, In-Line Blowers*

This quiet performance solution is a perfect alternative to Internal or Exterior blowers. Works with all Broan range hoods designed for use with External blowers.

HLB3 (280 CFM) HLB6 (600 CFM) HLB9 (800 CFM) HLB11 (1100 CFM)

All Exterior blowers can be installed on the roof or to an outside wall for the ultimate in quiet, high performance kitchen ventilation.

Quietest sound level is achieved when the blower is mounted at least 10' from the hood location and incorporates a 90° elbow in the duct run.

332H (900 CFM)331H (600 CFM) 336 (1500 CFM)335 (1200 CFM)

• Powerful and quiet, In-Line blowers are available in a range of CFM ratings to match your cooking preferences and ventilation requirements.

• Installs remotely in the interior of the home – not restricted by local exterior home codes or service concerns for roofmounted exterior applications.

• 8-position mounting brackets, or suspends with special suspension chains (hanger kit included).

• Designed to work independently from Internal or Exterior blowers, this is not a boost blower—the HLB series needs no other blowers in the system.

• Specially designed resilient motor mounts and housing isolation mounts prevent vibration noise.

• Flexible duct design allows straight-through or right-angle connections with built-in damper.

• Includes 10" round ductwork transition(s).

Internal Blower

Broan Elite Internal blowers provide high ventilation and durable construction to meet the needs of professional-style cooking appliances for the home.

P5 (460 CFM vertical) P8 (850 CFM vertical)

*Broan internal and external blowers are designed and UL Listed

for use with Broan products only. Use with other manufacturers’ products cannot be recommended.

• The P5 and P8 are designed for use with Broan Elite RMIP Inserts.

• All blowers are designed for quiet operation using the finest motors and balance wheels.

• Rough-In Kits are included to make the installation clean and simple.

Broan range hoods can be used to comply with California’s Title 24.

Page 51

Installation and blower selection guidelines

Blowers

1. Distance from cooking surface:

For optimal performance, the distance from the cooking surface to the bottom of the range hood should be between 24" to 30", unless otherwise noted. DO NOT install a Broan Elite range hood less than 24" above cooking surface.

To maintain hood performance at heights greater than the recommended range, use the following guidelines:

• For every 3" increase in installation height, add 100 CFM to the minimum exhaust requirement and/or a minimum of 3" to the hood/ liner width (may require going to the next hood width).

2. Range hood width:

The hood should never be less than the width of the cooktop.

3. Required blower CFM based on cooktop BTU output.

• For gas cooktops UNDER 60,000 BTUs or electric, choose a blower with a minimum of 100 CFM per lineal foot of your cooktop width. For example, a 36" wide cooktop requires a blower with a minimum of 300 CFM.

• High heat cooking or aromatic foods may require additional CFM. Always check with the range manufacturer. NOTE: Increasing capture area by 3" on each side is also a recommended way to address this issue.

• As a means to estimate the approximate CFM requirement for gas cooktops OVER 60,000 BTUs, choose a blower with 1 CFM per 100 BTU of cooktop output. To quickly calculate this number, add the BTU output from all burners and drop the last two zeros. For example, if the total BTU output of the cooktop burners is 65,000 BTUs, choose a blower with at least 650 CFM.

4. Additional CFM needs for a Grill or Griddle:

If your cooktop has a grill or griddle, ADD 200 CFM to your estimated CFM needs as calculated in step 3. For example, if your cooktop BTU output requires a 650 CFM blower, add 200 CFM for a total of 850 CFM.

Installation Example:

A consumer purchases a cooktop with these specifications:

• Four burner, 36" cooktop

• Burner output is 60,000 BTU

• The cooktop features a grill

• Installation requirements call for the range hood to be 33" over the range (3" above recommended maximum height)

Blower CFM Option 1: (Using the guidelines above) The blower must equal a minimum of 600 CFM (60000 BTU) + 200 CFM (for Grill requirement) + 100 CFM (for 3" of installation height) = 900 CFM

Blower CFM Option 2: (Using the guidelines above) Select a range hood that is a minimum of 3" WIDER than the cooktop, a minimum 600 CFM (60000

BTU) + 200

CFM (for Grill requirement) = 800 CFM

Internal, In-Line and Exterior blower specifications table

MODEL MOUNTING CFM HVI VOLTS AMPS ROUGH-IN DUCT†INLET/OUTLET DIRECTION MOTOR TYPE

P5 Internal 460V/500H Y 120 1.8 31⁄4 P8 Internal 850V/900H Y 120 3.4 3

331H 332H

335 336

HLB3

HLB6 HLB9

HLB11

Model 332KR Rough-In Kit required for installation with hood series E60000, E64000, RM60000 and RMIP

(Model 421 10" In-Line damper recommended for Exterior blowers).

* Straight CFM/Right angled CFM (rated with transitions provided).

†

Transitions provided with unit.

Not recommended for use with grill applications.

Exterior 600 Y 120 2.3 10" Round — — Single-Speed

Exterior 900 Y 120 5.8 10" Round — — Single-Speed

Exterior 1200 Y 120 3.0 10" Round — — Single-Speed

Exterior 1500 Y 120 3.8 10" Round — — Single-Speed

In-Line 280/260* Y 120 2.6 — 8" or 10"/8"Round V or H Single-Speed

In-Line 600/600* Y 120 2.9 — 10"/10" Round V or H Single-Speed

In-Line 800/700* Y 120 3.0 — 10"/10" Round V or H Single-Speed

In-Line 1100/1000* Y 120 5.0 — 10"/10" Round V or H Single-Speed

Broan Automatic Make-Up Air Dampers work with range hoods to allow the most efficient and effective home ventilation.

Broan Make-Up Air Dampers feature:

• Heavy duty galvanized steel construction.

• 24 VAC transformer.

• 6-inch round (MD6T), 8-inch round (MD8T) to use with hood models E60, E64, EW58, EW56, EI59, QP3, and QP4.

• MD6TU and MD8TU can be used with any Broan range hood over 300 CFM.

• MD6S and MD8S slave damper to gang with any Broan automatic dampers.

" x 10" — V or H —

⁄4

" x 14" — V or H —

Installation of Broan Make-Up Air Dampers

• Located in a 6-inch or 8-inch duct running between an exterior wall fresh air inlet (641FA of 643FA) to an interior location.

• Low-voltage wiring transmits open/close signal to the Make-Up Air Damper.

Synchronized Operation with Range Hood

• Damper opens and closes as the range hood is turned on and off.

• Prevents unwanted air infiltration and wasted energy.

Page 52

FINISHES (may not be in all widths) LIGHTING

SERIES

CA T.

PAGE DESCRIPTION

15000 41 Slide Out Hood WW, BL, SS

37000 45 Range Hood Shell WW, BT, AL, SS na na na na 24, 30, 36 Under Cabinet 18"–24" 6 na na Shell only na — — — —

52000 47 Mfg. Hsg. Range Hood WW, BT, AL

40000 45 Range Hood WW, BT, AL, SS, BL

Specifications

F40000 44 Range Hood

WH, BT, AL, SS, BL,

WW, B C

41000 46 Range Hood WW, BT, AL, SS, BL

42000 45 Range Hood WW, BT, AL, SS, BL

43000 44 Range Hood WW, BC, AA, SS, BL

46000 43 Range Hood WH, BT, AL, SS, BL, WW

QML 42 Range Hood WW, SS, BL

QT20000 42 Range Hood WW, BC, AA, SS, BL

88000 40 Range Hood WH, BT, AL, SS, BL, WW

89000 40 Range Hood WH, AL, SS, BL, WW

AP1/RP1 39 Range Hood SS, BL, WW

UNDER CABINET HOODS

QS1 (Allure I) 36, 37 Range Hood WW, BC, AA, SS, BL

QS2 (Allure II) 36, 37 Range Hood WW, BC, AA, SS, BL

QS3 (Allure III) 36, 37 Range Hood WW, BC, AA, SS, BL

QP1

(Evolution™ 1)

42" QP1

(Evolution™ 1)

QP2

(Evolution™ 2)

QP3

(Evolution™ 3)

QP4

(Evolution™ 4)

35 Range Hood WW, SS, BL

35 Range Hood WW, BC, SS, BL

34 Range Hood WW, SS, BL

33 Range Hood SS

E661 32 Range Hood SS, WH, BL 42" SS only

E60000 28, 29

HIGH PERFORMANCE HOODS

E64000 26, 27

Professional Style Hood Choice of Internal & External Blower s

EPD61 30, 31 Outdoor Range Hood SS

ENERGY STAR

PME300

ENERGY STAR

RME50000

24, 25 Range Hood SS

APE

24, 25 Range Hood SS, BL, WW

QDE

24, 25 Range Hood SS, BL, WW

QSE

23 Power Module Silver

23 Chimney Hood SS

* Mounting Height is measured from the top of the cooktop to the bottom of the Hood. Except for

QS and QP Series which is measured from the top of the hood to the top of the cooktop.

** Visible height of Chimney when in the raised position. *** Minimum Height is 24" when using optional RMP series backsplash.

24" Fluorescent

F20T12

Single 75W

Incandescent

Single 75W

Incandescent

Single 75W

Incandescent

Single 75W

Incandescent

Single 75W

Incandescent

Enclosed Single 75W

Incandescent

Single 75W

Incandescent

Halogen Dual 35W

MR16 GU10

Enclosed Dual 40W

A15

Enclosed Dual 75W

Incandescent

Enclosed Dual 75W

Incandescent

Halogen Dual 50W

MR16 GU10

Halogen Dual 50W

PAR20

Halogen Dual 50W

PAR20

Halogen Dual 50W

PAR20

Halogen Quad 35W

MR16 GU10

Halogen Quad 35W

MR16 GU10

Halogen Quad 50W

MR16 GU10

Halogen Quad 50W

MR16 GU10

Halogen Quad 50W

MR16 GU10

Dual 50W

MR16 GU10

Halogen 50W Lamps 2/3

MR16 GU10

Halogen 50W Lamps 2/3

MR16 GU10

Halogen Dual or Tri 50W

MR16 GU10

Single compact 26W

ﬂuorescent with 4W

incandescent

GX24Q-3

Dual compact 13W

ﬂuorescent bulbs

Single compact 26W ﬂuorescent

with 4W incandescent

Dual compact 13W

ﬂuorescent bulbs

Dual compact 13W

ﬂuorescent bulbs

G24Q-1

GX24Q-3

G24Q-1

CONTROL

FEATURES CONTROL TYPE

Variable speed Heat Sentr y

™

Slide Dual Centrifugal Blower 30, 36 Under Cabinet 18"–24" 1 na no 3-

AIR-MOVER

TYPE WIDTH (inches)

MOUNT

TYPE

2 speed Rocker Fa n 30 Under Cabinet

2 speed Rocker Fa n 21, 24, 30, 36, 42 Under Cabinet

2 speed Rocker Fa n 24, 30, 36, 42 Under Cabinet

2 speed Rocker Fa n 21, 24, 30, 36, 42 Under Cabinet

2 speed Rocker Fa n 24, 30, 36, 42 Under Cabinet

2 speed Rocker Fa n 30, 36 Under Cabinet

Variable speed Hi/Low light Rotary Fan 24, 30, 36, 42 Under Cabinet

2 speed Rocker 8" Axial Blade 30" Under Cabinet

Variable speed Hi/Low light Rotary 8" Axial Blade 30, 36, 42 Under Cabinet

Variable speed Hi/Low light Slid e Dual Centrifugal Blower

™

Variable speed Heat Sentr y

Two-Level Lights

2 speed w/ ON indicator Hi/

Low light

3 speed w/ LED indicator Hi/ Med/Low light Heat Sentry

3 speed + Boost Delay-off Filter Indicator Hi/Med/Low light Advanced Heat Sentry

Rotary Rocker Centrifugal Blower 30, 36 Under Cabinet

Rocker 10" Axial Blade 30, 36, 42 Under Cabinet

Electronic Push Centrifugal Blower 30, 36, 42 Under Cabinet 24"–30" see note* 7-

™

Electronic Push Centrifugal Blower 30, 36, 42 Under Cabinet 24"–30" see note* 7-

™

30, 33, 36, 39,

42, 48

30, 33, 36, 39,

42, 48

Under Cabinet

2 speed + Boost Hi/Low light Rocker Centrifugal Blower 30, 36 Under Cabinet

2 speed + Boost Hi/Low light Rocker Centrifugal Blower 42 Under Cabinet

3 speed w/ LED indicator Hi/

Med/Low light Advanced Heat

Sentry

3 speed + Boost Delay-off

Filter Indicator 4 setting

light/clock/timer Advanced

Heat Sentry

3 speed + Boost Delay-off

Filter Indicator 4 setting

light/clock/timer Advanced

Heat Sentry

3 speed+boost, Delay-off,

Heat Sentry

Variable speed Heat Sentr y

Power-on LED Indicator

Hi/Lo Light

Variable speed Heat Sentr y

Power-on LED Indicator

Hi/Lo Light

™

Soft Touch Electronic

Push

Advanced Electronic

Push w/ Digital

Display Optional

Remote Control

Advanced Electronic

Push w/ Digital

Display Optional

Remote Control

Centrifugal Blower 30, 36, 42 Under Cabinet

Centrifugal Blower with

Makeup Air Damper Interlock

Centrifugal Blower with

Makeup Air Damper Interlock

30, 36, 42 Under Cabinet

Electronic Push High ﬂow wheel 30, 36, 42 Under Cabinet 24"–30" 5-

™

Rotary Centrifugal Blower 30, 36, 42, 48, Wall

™

Rotary Centrifugal Blower 30, 36, 42, 48 Under Cabinet

3 speed Rotary Dual Centrifugal Blower 36, 48 Wall

™

Variable speed Heat Sentr y

Two-Level Lights

Rotary Rocker Centrifugal Blower 30 Under Cabinet

2 speed Rocker Centrifugal Blower 30 Under Cabinet

2 speed w/ ON indicator Hi/

Low light

3 speed Slide Centrifugal Blower 20-

Multi-speed Heat Sentry

†

SS=430 Stainless Steel, BL=Black on Black, AL=Almond w/Black Trim, AA=Almond on Almond,

Rocker 10" Axial Blade 30 Under Cabinet

⁄2

Built-In 24"–30" 3-

™

Slide Centrifugal Blower 30 Wall 24"–30" 11-

BT=Bisque/Biscuit w/Black Trim, BC=Bisque/Biscuit on Bisque/Biscuit, WW=White on White, WH=White w/Black Trim.

††

(Normal Setting).

Note: “Bisque/Biscuit” is a new color name for “Biscuit.” The actual color remains unchanged.

Page 53

MOUNTING

HEIGHT*

18"–24" 6 na no 5" round (V) Aluminum — — 100/8.0 Y

18"–24" 6 na no 3-1⁄4

18"–24" 6 na no Non-ducted Charcoal — — — —

18"–24" 6 na no 7" round (V) Aluminum — — 190/6.0 Y

18"–24" 6 na no 3-1⁄4

VISIBLE

SHELL HEIGHT

(inches)

CEILING

HEIGHT

MAX

BULB

INCLUDED DUCT

FILTERS

⁄4

" x 10" (V) MicroFoam 300/4.5 — — Y

" x 10" (V, H) Aluminum 160/6.5 160/6.5 — Y

" x 10" (V, H) 7" round (V) Non-ducted Aluminum 160/6.5 160/6.5 190/6.5 Y

" x 10" (V, H) 7" round (V) Non-ducted Aluminum w/ Light Lens 190/7.0 160/7.0 220/8.0 Y

INCLUDED

CFM/SONES VERT. RECT.

CFM/SONES

HORIZ. RECT.

CFM/SONES

VERT. ROUND

HVI

CERTIFIED

Specifications

18"–24" 6 na no 3-1⁄4

18"–24" 9 na no 3-1⁄4

24"–30" see note* 7-1⁄4

⁄4

24"–30" see note* 6-3⁄4

24"–30" see note* 7-1⁄4

30"–36" see note* 7-1⁄4

⁄8

24"–30" 18 8' no

20"–30" electric***

24"–30" gas

24"–30" 18 10' yes 10" round (V) SS Bafﬂe — — 1100/11.0 Y

18"–24" 9 na yes 3-1⁄4

18"–24" 4-3⁄8

10 na no

na no 3-1⁄4

na yes 3-1⁄4

na no 3-1⁄4

na yes 3-1⁄4

" x 10" (V, H) 7" round (V) Non-ducted Aluminum 190/7.5 190/7.5 220/7.5 Y

190/4.5

" x 10" (V, H) 7" round (V) Non-ducted Aluminum

" x 10" (V, H) 7" round (V) Non-ducted Aluminum 200/4.5 170/4.5 220/4.5 Y

" x 10" (V, H) Non-ducted Aluminum 360/5.5 350/6.0 — Y

" x 10" (V, H) Aluminum 460/6.0 440/7.0 — Y

" x 10" (V, H)

" x 10" (V, H) 7" round (V) Non-ducted Aluminum 210/5.0 (110/1.5)††220/5.0 (110/1.5)††230/5.0 (120/1.5)††Y

" x 10" (V, H) 7" round (V) Non-ducted MicroMesh Aluminum 280/5.5 (110/1.0)††300/4.5 (100/0.9)††280/5.0 (110/0.8)††Y

" x 10" (V, H) 7" round (V) Non-ducted Professional Aluminum

" x 10" (V, H) 7" round (V) Non-ducted

" x 14" (V, H) 7" round (V)

" x 14" (V, H) MicroMesh Aluminum

⁄2

Internal 3-

" x 10" (V, H) or 4-1⁄2

External 10" round (V, H)

⁄2

" x 10" (V, H) or 4-1⁄2

External 10" round (V, H)

" x 18-1⁄2

" x 10" (V, H)

" x 10" (V, H) Dishwasher-safe Aluminum 250/6.0 (120/1.1) 290/5.5 (130/0.8) — Y

MicroMesh with Antimicrobial

Protection MicroMesh Standard

Aluminum

Mid-mesh Aluminum with Antimicrobial

Protection

Mid-mesh Aluminum with Antimicrobial

Protection

Aluminum MicroMesh with Antimicrobial

" (V,H)

Protection

Aluminum Premium Mesh with

Antimicrobial Protection

Premium Mesh with Antimicrobial

Protection

SS Bafﬂe

MicroMesh with Antimicrobial

Protection MicroMesh Standard

Aluminum

200/5.0

(130/2.0)

440/7.0 (120/0.5) 440/7.0 (120/0.5) — Y

††

280/5.5 (110/0.3)

Boost 380

290/5.0 (120/0.8) 300/5.0 (120/0.8) 250/5.0 (120/0.8) Y

280/5.0 (100/0.8) 300/5.0 (100/0.8) 260/5.5 (90/0.8) Y

High 310/6.0 Med. 220/2.5

Low 100/0.6

Boost 390/7.5 High 320/5.5 Med. 210/2.0 Low 100/<0.3

Boost 570/7.0 High 430/4.5 Med. 280/1.5 Low 160/<0.3

120/0.4 290/2.5

Internal Blowers 600

or 1200. Exterior or

In-Line Blowers 280

Internal Blowers 600

or 1200. Exterior or

In-Line Blowers 280

440/7.0 (200/0.7) 440/7.0 (200/0.9) — Y

550/8.5

to 1500

(110/1.5)

300/4.5 (100/0.4)††

Boost 430

High 350/5.0 Med. 240/2.5

Low 100/0.6

Boost 450/7.0

High 360/4.5 Med. 230/1.5

Low 100/<0.3

Boost 630/7.5

High 470/4.5 Med. 290/1.5

Low 150/<0.3

130/<0.3 310/2.5

600/8.5

Internal Blowers 600 or 1200. Exterior or In-Line Blowers 280

to 1500

Internal Blowers 600 or 1200. Exterior or In-Line Blowers 280

to 1500

(120/2.0)

270/5.5 (100/0.4)††

Boost 350

High 280/6.0 Med. 200/2.5

Low 100/0.6

Boost 340/7.0

High 300/5.5 Med. 200/2.0

Low 100/<0.3

Boost 460/7.0

High 360/4.5 Med. 230/1.5

Low 130/<0.3

250/9.5

— Y

24"–30" see note* 7-1⁄4

⁄8

⁄16

na yes 3-1⁄4

na yes 6" round (V) Aluminum — — 290/5.0 (130/0.5) Y

8'–9' Opt. 10' yes 6" round (V) Aluminum — — 290/5.5 (135/0.5) Y

" x 10" (V, H) 7" round (V) Aluminum 210/5.5 (130/2.0)††210/5.0 (110/1.5)††220/5.5 (140/2.0)††Y

HVI-2100 CERTIFICATION

Broan range hoods are tested and certified by the Home Ventilating Institute. This is your assurance that each Broan unit has been tested and found to consistently deliver the air and sound performance specified.

■

Refers to ENERGY STAR Homes V3, HVAC System Quality Installation Rater Checklist

items 8.1 and 9.1.

Broan range hoods can be used to comply with California’s Title 24.

Page 54

Specifications

POWER PACKS AND POWER MODELS

DOWNDRAFTS

CHIMNEY HOODS

SERIES

CA T.

PAGE DESCRIPTION

PM250 20, 21 Power Module Silver

PM390 20, 21 Power Module Silver

103023 20, 21 Cus tom Hood Kit BL 24" Fluorescent Variable speed Heat Sentry

RMP1 18, 19 Power Pack SS

RMPE 18, 19 Power Pack External Blower SS

RMIP 18, 19 Pro-Style Insert SS

FINISHES (may not be in all widths) LIGHTING

Enclosed Dual 40W

Candelabra

Enclosed Dual 40W

Candelabra

Halogen Dual 50W

MR16 GU10

Halogen Dual 50W

MR16 GU10

Halogen Dual 50W

PAR20

CONTROL

FEATURES CONTROL TYPE

AIR-MOVER

TYPE WIDTH (inches)

2 speed Rocker Fa n 20-

3 speed Slide Centrifugal Blower 20-

™

Rotary Dual Centrifugal Blower 30–42 Built-In 18"–24" 4 na no 3-

™

Variable speed Heat Sentr y

Two-Level Lights

Slide Centrifugal Blower 27-9⁄16

™

Slide Centrifugal Blower 27-9⁄16

™

Rotary Centrifugal Blower 32-

⁄8

⁄2

, 44-3⁄8

MOUNT

TYPE

Built-In 24"–30" 3-

Built-In 24"–30" Flush na yes 6" round (V) Aluminum — — 400/9.0 Y

Built-In 25"–30" Flush na yes 8" round (V) Aluminum — —

Built-In 28"–34" Flush na no See Selected Blower Page 46, 47†††† SS & Aluminum

27000 17 Downdraft SS, (WH, BT, BL) na Variable speed Rotary Centrifugal Blower 30, 36 Under Counter na 7** na na 3-

28000 17 Downdraft External Blower SS, (WH, BT, BL) na Variable speed Rotary Centrifugal Blower 30, 36 Under Counter na 7** na na 3-

RMDD 16 Broan Elite Downdraft SS na Variable speed Rotary Centrifugal Blower 30, 36, 48 Under Counter na 9.5 na na 3-

RMDDEX 16

RM50000 14, 15 Chimney Hood SS, WH, BL Incandescent Dual 40W Multi-speed Heat Sentr y

RM51000 14, 15 Chimney Hood SS

RM52000 14, 15 Chimney Hood SS

RM53000 12, 13 Chimney Hood SS

E54000 10 Island Chimney Hood SS

EW56 12, 13 Chimney Hood SS

EW58 12, 13 Chimney Hood SS

EI59 9 Chimney Hood SS

61000 10 Chimney Hood SS

61000EX 10

63000 9 Island Chimney Hood SS

63000EX 9

RM65000 11 Chimney Hood SS

Broan Elite Downdraft External

Blower

Chimney Hood External

Blowers

Island Chimney Hood External

Blowers

SS na Variable speed Rotar y Centrifugal Blower 30, 36, 48 Under Counter

™

Slide Centrifugal Blower 30, 35-7⁄16

Halogen Dual 20W

JC/G4

Halogen Dual 20W

JC/G4

Halogen Dual 20W

JC/G4

Halogen Quad 20W

JC/G4

Halogen Dual 35W

MR16 GU10

Halogen Dual 35W

MR16 GU10

Halogen Quad 35W

MR16 GU10

Halogen Dual 20W

JC/G4

Halogen Dual or Quad 20W

JC/G4

Halogen Four 20W

JC/G4

Halogen Dual or Quad 20W

JC/G4

Halogen Dual 20W

MR16 GU10

Multi-speed Heat Sentry

3-speed, Delay-off, Filter indicator,

3-setting light, Heat Sentry™

3-speed, Delay-off, Filter indicator,

3-setting light, Heat Sentry™

3-speed, Delay-off, Filter indicator,

3-setting light, Heat Sentry™

3 speed Heat Sentry

Variable Heat Sentr y

3 speed Heat Sentry

Variable Heat Sentr y

Variable speed, Delay-off, Filter

Indicator Heat Sentry

™

Slide Centrifugal Blower 35-7⁄16

™

Slide Centrifugal Blower 30, 36, 42 Wall 24"–30" 5-

™

Slide Centrifugal Blower 30, 36, 42 Wall

™

Slide Centrifugal Blower 35-7⁄16

Electronic Push

Optional Remote

Electronic Push

Optional Remote

Electronic Push

Optional Remote

™

Electronic Push Centrifugal Blower 35-7⁄16

™

Centrifugal Blower w/ Make-

up Air Damper Interlock

Centrifugal Blower w/ Make-

up Air Damper Interlock

Centrifugal Blower w/ Make-

up Air Damper Interlock

Slide Centrifugal Blower 30, 35-7⁄16

Slide Centrifugal Blower 35-7⁄16

Slide Dual Centrifugal Blower 39-3⁄8

Slide Centrifugal Blower 39-3⁄8

x 27-9⁄16

30, 35-

30, 36 Wall

⁄16

x 25-9⁄16

35-

, 48 Wall 24"–30" 9-

x 27-5⁄8

Wall 24"–30" 11-

Wall 24"–30" 5-

Ceiling 24"–30" 3-

⁄16

Wall 24"–36" 8'–9' Opt. 10' yes 6" round (V) Non-ducted Aluminum — — 500/10.5 (200/2.5) Y

Ceiling 24"–36" 8'–9' Opt. 10' yes 6" round (V) Non-ducted Aluminum — — 500/10.5 (200/2.5) Y

, 48 Wall 24"–30" 9-

Ceiling 24"–30" 10-

Wall 24"–30" 11-

P5 50, 51 Internal Blower for and RMIP na na na na Centrifugal Blower na Internal to Hood na na na na 3-

P8 50, 51 Internal Blower for and RMIP na na na na Dual Centrifugal Blower na Internal to Hood na na na na 3-

331H 50, 51 †††Exterior Blower na na na na Centrifugal Blower na Roof or Outside Wall na na na na 10" round na — — 600/na Y

332H 50, 51

†††Exterior Blower including

28000

na na na na Centrifugal Blower na Roof or Outside Wall

335 50, 51 †††Exterior Blower na na na na Centrifugal Blower na Roof or Outside Wall na na na na 10" round na — — 1200/na Y

336 50, 51 †††Exterior Blower na na na na Centrifugal Blower na Roof or Outside Wall na na na na 10" round na — — 1500/na Y

BLOWERS

HLB3 50, 51 †††In-Line Blower na na na na Centrifugal Blower na Attached to Framing na na na na Inlet 8" or 10" round Outlet 8" round na — — S280(H)/ S260(V) Y

HLB6 50, 51 †††In-Line Blower na na na na Centrifugal Blower na Attached to Framing na na na na Inlet 10" round Outlet 10" round na — — S600(H)/ S600(V) Y

HLB9 50, 51 †††In-Line Blower na na na na Centrifugal Blower na Attached to Framing na na na na Inlet 10" round Outlet 10" round na — — S800(H)/ S700(V) Y

HLB11 50, 51 †††In-Line Blower na na na na Centrifugal Blower na Attached to Framing na na na na Inlet 10" round Outlet 10" round na — — S1100(H)/ S1000(V) Y

* Mounting Height is measured from the top of the cooktop to the bottom of the Hood. Except for

QS and QP Series which is measured from the top of the hood to the top of the cooktop.

** Visible height of Chimney when in the raised position. *** Minimum Height is 24" when using optional RMP series backsplash.

†

SS=430 Stainless Steel, BL=Black on Black, AL=Almond w/Black Trim, AA=Almond on Almond, BT=Bisque/Biscuit w/Black Trim, BC=Bisque/Biscuit on Bisque/Biscuit, WW=White on White, WH=White w/Black Trim.

†††

External blower for E60000, E64000, , 61000EX, 63000EX, RMPE, RMIP, RMDDEX and

E66000 Series.

††††

RMIP Series require 332KR Rough-In Kit when used with Exterior or In-Line blowers.

Performance ratings assume use of 10" round transition provided with blowers.

Note: “Bisque/

Biscuit” is a new color name for “Biscuit.” The actual color remains unchanged.

Page 55

MOUNTING

HEIGHT*

VISIBLE

SHELL HEIGHT

(inches)

CEILING

HEIGHT

MAX

⁄8

BULB

INCLUDED DUCT

na no 7" round (V) Non-ducted kit 356NDK Aluminum w/ Light Lens — — 250/8.0 Y

na no 6" round (V) Non-ducted kit 357NDK Aluminum w/ Light Lens — — 390/6.0 Y

na 9.5 na na 3-1⁄4

⁄16

8'–9' Opt. 10' yes 6" round (V) Non-ducted Aluminum — — 290/6.5 Y

⁄16

8'–9' Opt. 10' yes 6" round (V) Non-ducted Aluminum — — 370/7.0 Y

⁄16

8'–9' Opt. 10' yes 6" round (V) Non-ducted Aluminum — — 370/7.0 Y

FILTERS

INCLUDED

⁄4

" x 10" (V, H) Aluminum 360/5.0 360/4.5 — Y

⁄4

" x 10" (V, H) Aluminum 500/na 500/na — Y

⁄4

" x 10" (V) Aluminum — —

⁄4

" x 10" Stainless Steel 500/na — — Y

" x 14" Stainless Steel — —

CFM/SONES VERT. RECT.

460 to 850 See Md#

P5, P8

CFM/SONES

HORIZ. RECT.

CFM/SONES

VERT. ROUND

280 to 1500 See

Exterior or In-Line

Blowers

— — Y

280 to 1100: See Md#

332H, or In-Line Blower s

280 to 1500 See Exterior

or In-Line Blowers

HVI

CERTIFIED

Specifications

24"–30" 3-1⁄8

8'–9' Opt. 10' yes 6" round (V) Non-ducted Aluminum — — 370/7.0 Y

⁄8

8'–9' Opt. 10' yes 6" round (V) Non-ducted Aluminum — — 480/9.5 Y

24"–36" 8'–9' Opt. 10' yes 6" round (V) Non-ducted Aluminum — — 500/10.5 (200/2.5) Y

⁄8

8'–9' yes

⁄8

8'–9' yes 8" round (V) Stainless Steel — —

⁄4

8'–9' yes 8" round (V) Stainless Steel — — 900/9.5 Y

⁄4

8'–9' Opt. 10' yes 8" round (V) Stainless Steel — —

⁄16

8'–9' yes 6" round (V) Aluminum — — 450/9.0 Y

6" round (V) 30" & 35-1⁄2

round (V) 48" Width Non-duc ted

" Width 8"

⁄4

" x 10" (V, H) na 460/10.5 500/10 – Y

⁄4

" x 14" (V, H) na 850/10.5 900/10 — Y

Stainless Steel — — 450/19.0 900/19.5 Y

280 to 1500 See External

or In-Line Blowers

280 to 1500 See External

or In-Line Blowers

na na na na 10" round na — — 900/na Y

HVI-2100 CERTIFICATION

■

Refers to ENERGY STAR Homes V3, HVAC System Quality Installation Rater

Checklist items 8.1 and 9.1.

Broan range hoods can be used to comply with California’s Title 24.

Page 56

VENTILATION

FANS

CHIMES

TRASH COMPACTORS

Broan® is America’s leading brand of residential ventilation products

including range hoods, ventilation fans, heater/fan/light combination units, Balanced Ventilation Systems, built-in heaters, whole-house fans, electric and solar-powered attic ventilators and trash compactors.

NuTone

is America’s leading brand of residential built-in convenience products including door chimes, central vacuum systems, intercom systems, ceiling fans, home theater speakers, ironing centers and ventilation fans.

Make yours a Broan-NuTone home.

SOLAR-POWERED

ATTIC VENTILATORS

RANGE HOODS

CEILING FANS CENTRAL VACUUMS

INTERCOMS

IRONING CENTERS

VENTILATION

FAN/LIGHTS

BALANCED

VENTILATION SYSTEMS

HEATERS

Broan.com

Broan-NuTone LLC, 926 W. State Street Hartford, WI 53027 800-558-1711 In Canada call 877-896-1119

America’s Choice For Green Builders.

Proud to be ENERGY STAR® partners.

0 2 6 7 1 5 1 4 5 1 6 4

Broan 412123 Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual