Broadcom BRCM1050 Users Guide

OEM Installation Guidance Document

For BRCM WLAN Module, BCM94313HMG2L

FCC ID: QDS-BRCM1050; IC: 4324A-BRCM1050

Conditions on using BRCM regulatory approvals:

A. Customer must ensure that its product (the “CUSTOMER Product”) is electrically
identical to Broadcom’s reference designs. Customer acknowledges that any modifications to
Broadcom’s reference designs may invalidate regulatory approvals in relation to the
CUSTOMER Product, or may necessitate notifications to the relevant regulatory authorities.

B. Customer is responsible for ensuring that antennas used with the product are of the
same type, with same or lower gains as approved and providing antenna reports to Broadcom.

C. Customer is responsible for regression testing to accommodate changes to Broadcom’s
reference designs, new antennas, and portable RF exposure safety testing/approvals.

D. Appropriate labels must be affixed to the CUSTOMER Product that comply with
applicable regulations in all respects.

E. A user’s manual or instruction manual must be included with the customer product that
contains the text as required by applicable law. Without limitation of the foregoing, an example
(for illustration purposes only) of possible text to include is set forth below:

Antenna Host Platform Location Information. (Refer also to “FCC Radio-Frequency
Exposure & Approval Conditions” below)

Page 1 of 10

OEM Installation Guidance Document

For BRCM WLAN Module, BCM94313HMG2L

FCC ID: QDS-BRCM1050; IC: 4324A-BRCM1050

Antenna Dimensional Information for Netbook/notebook/laptop Mode.

WLAN aux

184 mm

Bottom of laptop Bottom of laptop

184 mm

Page 2 of 10

270 mm

184 mm

OEM Installation Guidance Document

For BRCM WLAN Module, BCM94313HMG2L

FCC ID: QDS-BRCM1050; IC: 4324A-BRCM1050

Antenna Dimensional Information for Tablet Mode.

19.35 mm

2.183 mm

WLAN aux

51 mm

92.3 mm

WLAN main

19 mm

167.77 mm 165.59 mm

27.5 mm

Page 3 of 10