Page 1
SWIVEL CLAMP 302-V2
General:
Coupler SWIVEL CLAMP 302-V2 is constructed from high tensile aluminum extrusion making it not
only light weight, but extra strong.
It is made up of two single couplers. It’s used to connect two pipes. Allowing a full 360 degree of
movement. Easily be fixed in a 90 or 180 degree.
Specifications:
Material: Al 6061-T6
Width: 30mm
Tube Diameters: 38—51mm
Max. Safe working load: 500KGs
Unit weight: 0.696 kg
Installation Method:
① Open the package, Loosen the wing knobs according to the direction of arrow on the picture
No1;
Page 2
② Fix the coupler in two pipes, be sure to tighten the wing knobs. Allowing a full 360 degree of
movement . Easily fixed in a 90 or 180 degree with an extra pin.(Picture No2,No3)
Warning:
1. The operator instruction shall be read before the use of the product;
2. Please call the professionals to install the product.
3. If safety problems found existing in the product, must not be installed and contact with suppliers;
4. Do not allow children to play in the working area during assembly and adjustments;
BEGLEC NV
‘t Hofveld 2c, 1702 Groot-Bijgaarden, Belgium
WWW.BRITEQ-LIGHTING.COM
Loading...