Page 1
ALU CLAMP 301-V2
General:
Convenient to fix all heavy stage equipment. Tightly locked pipe make it very safe.
Aluminum 6061-T6 high strength structural aluminum extrusion mount with M10 CSK bolt and nonslip nut.
Specifications:
Material: Al 6061-T6
Width: 30 mm
Tube Diameters: ø38—51 mm
Max. Safe working load : 300 kgs
Unit weight: 0.348 kg
Installation Method:
② Connected to the target product (Object), then tighten the wing nut according to the direction of
arrow on the picture No.2；
①
Open the package,
Loosen the non-slip nut according to the direction of arrow on the picture No1;
Page 2
③ Loosen the wing knob according to the direction of arrow on the picture No3,make Max opening
angle between A and B
④ Fix the coupler on the pipe, be sure to tighten the wing knob，refer the following picture No.4
Warning:
1. The operator instruction shall be read before the use of the product;
2. Please call the professional to install the product.
3. If safety problems found existing in the product, must not be installed and contact with suppliers;
4. Do not allow children to play in the working area during assembly and adjustments;
BEGLEC NV
‘t Hofveld 2c, 1702 Groot-Bijgaarden, Belgium
WWW.BRITEQ-LIGHTING.COM
Loading...