Britelite M4000 User Manual
OPERATIONS MANUAL FOR EDISON PROFESSIONAL
Professional ABS Molded Loudspeaker
M4000
OPERATIONS MANUAL FOR EDISON PROFESSIONAL
Professional ABS Molded Loudspeaker
Introduction:
Congratulations on your purchase of an M-4000 powered loudspeaker, engineered and manufactured by
BriteLite Enterprises. The M-4000 includes a high-output compression driver, and 15” woofer to produce an
even, smooth studio quality sound in a sound reinforcement speaker. Our design goal was to build a speaker
with accurate playback, smooth dispersion of mid and high frequencies and an ergonomic design for easy
transport and setup. The result is a sound reinforcement system dynamic enough to use at home, in the
studio, parties or in home theater.
Features:
2-way amplified Active Speaker
15” Long-throw woofer with high-temperature voice coil
Ultra-wide, smooth dispersion of high and mid frequencies
Mic/Line input and pass-thru connector
USB & SD Card input supports .wav & MP3
Bluetooth Compatible
Multi-function remote control
Stand/Pole-mountable
Cautions:
1. All Operating Instructions should be read before using this equipment.
2. To reduce the risk of electrical shock, do not open this unit. There are NO REPLACEABLE PARTS
INSIDE. Please refer servicing to a qualified service technician.
3. Do not expose this unit to direct sunlight or to a heat source such as a radiator or stove.
4. This unit should only be cleaned with a damp cloth. Avoid solvents or other cleaning detergents.
5. When moving this equipment, it should be placed in its original carton and packaging. This will reduce
the risk of damage during transit.
6. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
7. DO NOT US ANY SPRAY CLEANER OR LUBRICANT ON ANY CONTROLS OR SWITCHES
8. Make sure All of your equipment is completely OFF and lower ALL VOLUME, LEVEL & GAIN controls
before connecting a sound source.
9. Only LINE LEVEL SIGNALS SHOULD BE SENT TO YOUR SPEAKER.
Disregarding any of the above will void your warranty!!!!
Loading...