Britax Chaperone Stroller, Chaperone User Manual
PLEASE READ
INSTRUCTIONS
Chaperone™ Stroller
User Guide
Warnings ........................................... 2
Features ........................................... 3
Assembly .......................................... 4
Operating Instructions
Unfolding ............................................. 9
Parking Brake ......................................... 11
Folding ..............................................12
Infant Carrier Mode ....................................14
Attaching Chaperone Infant Carrier .......................16
Removing Chaperone Infant Carrier .......................17
Returning to Standard Mode ............................18
Securing Child & Harness Adjustment (Standard Mode) ........19
Swivel Wheels .........................................21
Opening and Closing Canopy ............................21
Leg Rest .............................................22
Wheel Removal ........................................22
Backrest & Reclining. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Armrest Caps .........................................23
Care and Maintenance ................................24
Warranty ...........................................25
This product and its components are subject to change without notice.
© 2008 Britax Child Safety, Inc. All rights reserved.
P329000 R1:02/09
Printed in China
Table of Contents
Features
2
•
Never leave child unattended.
•
Avoid serious injury from falling or sliding out. Always use harness to secure child.
•
Do not use stroller for an infant younger than 6 months without an infant carrier.
•
Do not use stroller with a child who weighs more than 55 lbs (24.9 kg).
•
Do not overload basket – Maximum weight in basket is 10 lbs (4.5 kg). Overloading
the basket may cause the stroller to become unstable.
• Do not overload parent tray - Maximum weight in tray is 3 lbs (1.4 kg). Overloading
the tray may cause the stroller to become unstable.
• Do not overload child tray - Maximum weight in tray is 2 lbs (0.9 kg). Overloading
the tray may cause the stroller to become unstable.
•
Always make certain that the stroller is fully open and locked before use.
•
Assembly of this stroller must be performed only by an adult.
•
Do not hang or place items on the stroller handle or frame. They may cause the
stroller to become unstable.
•
Children must always be restrained to prevent standing or falling out of stroller.
•
Only use Britax approved child restraints or carriers with this stroller.
•
Do not allow children to climb on or play with the stroller.
•
Never use stroller on stairs or escalators.
•
To avoid entrapment or pinching, do not fold or unfold stroller when child is in or
near stroller.
•
Stroller is intended for walking speed only. Do not use while jogging, skating, etc.
•
Never use the stroller with more than one child at a time.
•
Always set the parking brake when stroller is not moving.
•
Only use accessories and replacement parts approved by Britax Child Safety, Inc.
•
Read and understand these instructions before using this product. To ensure
proper use, store this user guide in a convenient place so it can be consulted
often. Failure to follow all warnings and instructions could result in serious injury or
death.
Chaperone
Canopy
5 Point
Harness
Visor
Child Tray
Leg Rest
Folding
Strap
Front
Wheel
Release
Storage Basket
Swivel Wheel Lock
Parent Tray
Handle
Adjustment
Button
Canopy Lock
Parking
Brake
Back
Wheel
Release
Carrier
Mode
Ta bs
Hinge
Covers
Recline Adjuster
Tray Release
Lever
Chassis Lock
(on frame above
folding hinge)
Tray Release Button
Canopy Window
Basket Support Mount
3
NOTE: Actual product may vary from photographs
WARNINGS
Assembly
Assembly - What's In The Box
Assembly
Unfolding Frame Before Assembly
Open frame until it locks into place 2
and set it in the standing position.
Lower each arm rest until it locks into 3
the frame.
4 5
From to the right side of the stroller, 1
depress chassis lock release button
and unfold frame.
Assembly
Hinge Covers
With the stroller unfolded, connect the 2
hooks to the outside of the frame then
lay the hinge cover over the hinge and
fasten the 2 snaps.
Recline Seat.1
Slide canopy bracket onto the 2
canopy mount on frame until
locked into place.
Canopy
Attach hook-and-loop fasteners 3
to the seating pad on the inside
of the frame.
Attach hook-and-loop fasteners 4
and snaps around the back of
the seat.
Assembly
Front Wheels
Child Tray
With Britax logo on the outside,
slide mounting pin on front wheel
assembly into front wheel housing.
Pull wheel to ensure that it is
secure.
Slide the rear wheel axle into the
housing on the side of the rear wheel
assembly. Pull wheel to ensure that
it is secure.
Position child tray above the 1
mounting brackets located at the
end of each arm rest.
Slide the tray down until both sides 2
lock in place. A click will be heard
when tray engages brackets.
Parent Tray
Line up the mounting clips on both 1
sides of the tray with the framemounted brackets located between
the handle of the stroller.
Guide the tray down until a click is 2
heard and the tray locks into place.
6 7
Rear Wheels
Loading...