Your Heating Specialist since 1949
XtremeFLEX® BWH-D Dual Element Heating Tapes
Product Highlights
Dual heater element design increases exibility
Connects easily to your choice of temperature control
Includes high-temperature tie-downs for easy
installation
Specications:
• Highly exible and durable multi-stranded dual heating
element provides even heat across tape
• Reinforced with high temperature Samox® berglass for
added strength and durability
• Maximum exposure temperature: 1400°F (760°C)
• Power density: 13.1 watts/in2 (0.020 watts/mm2)
• Suitable for electrical conductive surfaces
• 24” (610mm) power leads with
- 120VAC: standard 2-prong (NEMA 1-15) plug
- 240VAC: bare-wire connection
• Ingress Protection Rating: IP5X
BWH-D
HEATING TAPE
Ordering Information:
Width Length Total Part No. Part No.
in (mm) ft (m) Watts 120VAC 240VAC
0.5 (13) 2 (0.6) 156 BWH051020LD BWH052020LD*
0.5 (13) 4 (1.2) 312 BWH051040LD BWH052040LD*
0.5 (13) 6 (1.8) 468 BWH051060LD BWH052060LD*
0.5 (13) 8 (2.4) 624 BWH051080LD BWH052080LD*
0.5 (13) 10 (3.1) 780 BWH051100LD BWH052100LD*
1.0 (25) 2 (0.6) 312 BWH101020LD BWH102020LD*
1.0 (25) 4 (1.2) 624 BWH101040LD BWH102040LD*
1.0 (25) 6 (1.8) 936 BWH101060LD BWH102060LD*
1.0 (25) 8 (2.4) 1248 BWH101080LD BWH102080LD*
* Plug not included
IMPORTANT: Temperature controller is required for this product. See pages 86 through 104 for options.
Toll Free: 800-848-7673 Phone: 614-294-3376 www.BriskHeat.com Email: bhtsales1@briskheat.com Fax: 614-294-3807
© BriskHeat Corporation. All Rights Reserved. 18-02
33