BriskHeat X2J-BS0101140L, X2J-BS0101160L, X2J-BS0101080L, X2J-BS0101100L, X2J-BS0101120L Data Sheet

B S 0

Y o u r H e a t i n g S p e c i a l i s t s i n c e 1 9 4 9

XtremeFLEX® BS0 Silicone Rubber Heating Tapes

Product Highlights

Moisture, chemical, and radiation resistant

Exceptional durabiltiy and flexibility for a wide range of

heating applications

Rapid thermal response

Suitable for electrically conductive surfaces

Choice of power leads on same end or opposite ends

(bare wire only)

	Specifications:		<![if ! IE]> <![endif]>H
	• Maximum Exposure Temperature: 450°F (232°C)
	• Silicone rubber extruded outer sheath		<![if ! IE]> <![endif]>E
			<![if ! IE]> <![endif]>T A
	•	Fiberglass knitted and braided construction
	• Minimum Bend Radius: 0.250in (6mm)		<![if ! IE]> <![endif]>I
	• Nominal Thickness: 0.125in (3mm)		<![if ! IE]> <![endif]>N
			<![if ! IE]> <![endif]>G
	•	Power Density: 4.3 W/in2 (0.007 W/mm2)
			<![if ! IE]> <![endif]>T
	•	120 or 240VAC
	• Electrical leads on same end		<![if ! IE]> <![endif]>A
			<![if ! IE]> <![endif]>E P
	•	Ingress Protection Rating: IP66

Ordering Information:

Width	Length		Total	Part No.	Part No.
in (mm)	ft (m)		Watts	120VAC	240VAC
0.5 (13)	2	(0.6)	52	BS0051020L	BS0052020L**
0.5 (13)	4	(1.2)	104	BS0051040L	BS0052040L**
0.5 (13)	6	(1.8)	156	BS0051060L	BS0052060L**
0.5 (13)	8	(2.4)	209	BS0051080L	BS0052080L**
0.5 (13)	10	(3.1)	261	BS0051100L	BS0052100L**
0.5 (13)	12	(3.7)	313	BS0051120L	BS0052120L**
1.0 (25)	2	(0.6)	104	BS0101020L	BS0102020L**
1.0 (25)	4	(1.2)	209	BS0101040L	BS0102040L**
1.0 (25)	6	(1.8)	313	BS0101060L	BS0102060L**
1.0 (25)	8	(2.4)	418	BS0101080L	BS0102080L**
1.0 (25)	10	(3.1)	522	BS0101100L	BS0102100L**
1.0 (25)	12	(3.7)	627	BS0101120L	BS0102120L**		Adhesive Tape
1.0 (25)	14	(4.3)	731	BS0101140L	BS0102140L**
1.0 (25)	16	(4.9)	836	BS0101160L	BS0102160L**		Provides intimate contact with surface to be heated.
1.0 (25)	18	(5.5)	940	BS0101180L	BS0102180L**		A heating tape essential!
1.0 (25)	20	(6.1)	1075/1045	BS0101200L	BS0102200L**
							Part			Width	Length	Temperature
2.0 (51)	2	(0.6)	209	BS0201020L	BS0202020L*			Material
							Number			in (mm)	Yards (m)	Limit
2.0 (51)	4	(1.2)	418	BS0201040L	BS0202040L*
							PSAT36A	Fiberglass		0.5 (13)	36 (32.9)	350°F (176°C)
2.0 (51)	6	(1.8)	627	BS0201060L	BS0202060L*
2.0 (51)	8	(2.4)	836	BS0201080L	BS0202080L*		AAT260	Aluminum		2.0 (51)	60 (54.8)	350°F (176°C)
2.0 (51)	10	(3.1)	1045	BS0201100L	BS0202100L*		AAT2180	Aluminum		2.0 (51)	60 (54.8)	550°F (288°C)
2.0 (51)	12	(3.7)	1254	BS0201120L	BS0202120L*
2.0 (51)	14	(4.3)	1463	BS0201140L	BS0202140L*
2.0 (51)	16	(4.9)	1627	BS0201160L	BS0202160L*
2.0 (51)	18	(5.5)	1881	BS0201180L*	BS0202180L*
2.0 (51)	20	(6.1)	2090	BS0201200L*	BS0202200L*

Ordering option: For a single power lead on opposite ends, remove “L” from end of part number.

* Bare wire, plug not included

** Ferrule crimp wire termination

IMPORTANT: Temperature controller is required for this product. See pages 86 through 104 for options.

Toll Free: 800-848-7673 Phone: [phone] w w w .BriskHeat. c o m	Email: [e-mail]	Fax: [phone]
				35
© BriskHeat Corporation. All Rights Reserved. 18-05