Brinkmann SpotLight User Manual
OWNER’S MANUAL & OPERATING INSTRUCTIONS
WARNING
READ AND FOLLOW ALL WARNINGS
AND INSTRUCTIONS IN THIS
MANUAL TO AVOID PERSONAL
INJURY OR PROPERTY DAMAGE.
• Never place spotlight face down when light is on or is still hot
from recent use. Doing so could burn/ignite surfaces such as
seats, carpeting, etc. and cause major property damage.
Always turn spotlight off when not in use.
• T o prevent serious damage to eyesight, never look into
spotlight when light is on. Do not shine light into the face of
someone else.
• Do not touch lens of spotlight when light is on or if it was
recently on. The lens will be hot and could cause serious
burns.
• Do not place spotlight in water. Keep all components dry and
out of water at all times.
• Do not allow children to handle or operate this spotlight.
• Do not use this product for other than its intended use.
• Do not operate in close proximity of combustible or
flammable materials.
• Do not attempt to operate spotlight if cord, plug, bulb or any
part of the spotlight is damaged or corroded.
• Only use AC charger and DC lighter plug that are provided
with the L.E.D./Xenon spotlight or their replacements.
• A damaged battery can leak acid. Avoid contact with eyes
and skin. If contact occurs, flush immediately with large
amounts of water. DO NOT ingest. If contact with eyes or
ingestion occurs, consult physician immediately.
IMPORTANT SAFETY WARNINGS
READ AND FOLLOW ALL SAFETY WARNINGS AND INSTRUCTIONS IN THE OWNER’S MANUAL
BEFORE OPERATING SPOTLIGHT.
WARNING
USE CAUTION AND COMMON SENSE WHEN OPERATING YOUR SPOTLIGHT.
FAILURE TO ADHERE TO THE SAFETY WARNINGS AND GUIDELINES IN THIS MANUAL
COULD RESULT IN BODILY INJURY OR PROPERTY DAMAGE.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
™
WARNING
TO PREVENT DAMAGE TO
EYESIGHT, NEVER LOOK INTO
SPOTLIGHT WHEN LIGHT IS ON. DO
NOT SHINE LIGHT INTO THE FACE
OF SOMEONE ELSE.
INSTR-800-2222-0_LED_Xenon.qxd 8/31/05 5:47 PM Page 2
Step 1:
Make sure trigger switch is not locked in the ON position.
Step 2:
Plug the AC charger or DC charger/adapter into the socket located on
the base of the spotlight handle as illustrated.
Step 3: For DC Charger/Adapter:
Plug the other end of the DC charger/adapter into a cigarette lighter
receptacle.
For AC Charger:
Plug the other end of the AC charger into a wall outlet.
Parts List
1
L.E.D./Xenon spotlight
2
120-volt AC charger
3
12-volt DC charger/adapter lighter plug
Owner’s Manual
OPERATING INSTRUCTIONS
READ AND FOLLOW ALL SAFETY WARNINGS AND INSTRUCTIONS IN THE OWNER’S MANUAL
BEFORE OPERATING SPOTLIGHT.
Inspect contents of the box to ensure all parts are included and undamaged.
Step 1:
Depress trigger switch in handle to turn spotlight ON.
Step 2:
Release trigger switch to turn spotlight OFF.
Continuous Beam Using Lock Button:
Step 1:
For a continuous beam, depress trigger switch and slide the lock button
to the LOCKED position.
Step 2:
T o unlock and turn spotlight OFF, slide the lock button to the
UNLOCKED position.
NNNNOOOOTTTTEEEE::::T o lock the L.E.D./Xenon in the OFF position, release trigger switch, then
slide the lock button to the LOCKED position.
WARNING:
Always turn spotlight off when not in use.
Switching Between Xenon and L.E.D. Beams:
Step 1:
For Xenon beam, slide switch on back of light to Xenon dot, as
illustrated.
Step 2:
For L.E.D. beam, slide switch on back of light to L.E.D. dot, as
illustrated.
NNNNOOOOTTTTEEEE::::The L.E.D./Xenon will burn for approximately 85 minutes if using Xenon
beam, or approximately 80 hours if using L.E.D. beam.
1
2
3
To Operate
2
T rigger
Switch
LED Indicator
Lock
Button
Beam
Switch
Xenon
Beam
L.E.D.
Beam
Unlocked
Locked
To Charge
INSTR-800-2222-0_LED_Xenon.qxd 8/31/05 5:47 PM Page 3
XENON
LED
Loading...