Brinkmann 810-3045-s Owner's Manual

OWNER’S MANUAL

ASSEMBLY AND OPERATING IN STRUC TIONS

MANUAL DEL PROPIETARIO

INSTRUCCIONES DE ARMADO Y OPERACIÓN

SAVE THIS MANUAL FOR FUTURE REFERENCE

GUARDE ESTE MANUAL PARA REFERENCIA FUTURA

WARNING

READ AND FOLLOW ALL WARNINGS AND

INSTRUCTIONS IN THIS MANUAL TO AVOID

PERSONAL INJURY OR PROPERTY DAMAGE.

ADVERTENCIA

LEA Y SIGA TODAS LAS ADVERTENCIAS E INSTRUCCIONES EN ESTE MANUAL PARA EVITAR LESIONES PERSONALES O DAÑOS

MATERIALES.

NOTICE TO INSTALLER:

LEAVE THESE INSTRUCTIONS WITH

THE GRILL OWNER FOR FUTURE

REFERENCE .

AVISO PARA EL INSTALADOR:

ENTREGUE ESTAS INSTRUCCIONES AL

PROPIETARIO DE LA PARRILLA PARA

REFERENCIA FUTURA.

IMPORTANT SAFETY WARNINGS

WE WANT YOU TO ASSEMBLE AND USE YOUR GRILL AS SAFELY AS POSSIBLE.

THE PURPOSE OF THIS SAFETY ALERT SYMBOL

IS TO ATTRACT YOUR ATTENTION TO POSSIBLE HAZARDS AS YOU ASSEMBLE AND USE YOUR GRILL.

WHEN YOU SEE THE SAFETY ALERT SYMBOL, PAY CLOSE ATTENTION TO THE INFORMATION WHICH FOLLOWS!

READ ALL SAFETY WARNINGS AND INSTRUCTIONS CAREFULLY

BEFORE ASSEMBLING AND OPERATING YOUR GRILL.

WARNING

• Only use this grill on a hard, level, non-combustible, stable surface (concrete, ground, etc.) capable of supporting the weight of the grill. Never use on wooden or other sur fac es that could burn.

• DO NOT use grill without charcoal tray in place. DO NOT attempt to remove charcoal tray while tray contains hot coal.

• Proper clearance of 10 feet between the grill and com bus ti ble material (bushes, trees, wooden decks, fences, buildings, etc.) or construction should be maintained at all times when grill is in use. Do not place grill under a roof overhang or other enclosed area.

• For outdoor use only. Do not operate grill indoors or in an enclosed area.

• For household use only. Do not use this grill for other than its intended purpose.

• We recommend the use of a Charcoal Chimney Starter to avoid the dangers associated with charcoal lighting fluid. If you choose to use charcoal lighting fluid, only use lighting fluid approved for lighting charcoal. Care ful ly read man u fac tur er’s warnings and instructions on the charcoal lighting fluid and charcoal prior to the use of their product. Store charcoal lighting fluid safely away from grill.

• When using charcoal lighting fluid, allow charcoal to burn with grill lid and doors open until covered with a light ash (approximately 20 min utes). This will allow charcoal lighting fluid to burn off. Failure to do this could trap fumes from charcoal lighting fluid in grill and may result in a flash fire or explosion when lid is opened.

• Only use charcoal chimney starter if starting fire in second section after 1st fire is already burning. Lighter fluid may ignite from heat causing flash fire. Otherwise, fires must be started in both cooking chambers at the same time.

• Never use charcoal that has been pre-treated with lighter fluid. Use only a high grade plain charcoal or charcoal/wood mixture.

• Do not use gasoline, kerosene or alcohol for lighting char coal. Use of any of these or similar products could cause an explosion possibly leading to severe bodily injury.

• Never add charcoal lighting fluid to hot or even warm coals as flashback may occur causing severe burns.

• Place grill in an area where children and pets cannot come into contact with unit. Close supervision is necessary when grill is in use.

• Do not leave grill unattended when in use.

• When adding charcoal and/or wood, use extreme caution and follow instructions in “Adding Charcoal/Wood During Cooking” section of this manual.

• Do not store or use grill near gasoline or other flammable liquids, gases or where flammable vapors may be present.

• Do not store lighter fluid or other flammable liquids or material under the grill.

• Use caution when adjusting charcoal grate height. Handle may be hot when in use.

• Never raise or lower charcoal grate when water smoking as hot water may splash onto coals creating a burst of hot steam and coals.

Grill is hot when in use. To avoid burns:

• DO NOT attempt to move the grill.

• Brace grill so the unit does not accidentally move.

• Wear protective gloves or oven mitts.

• DO NOT touch any hot grill surfaces.

• DO NOT wear loose clothing or allow hair to come in contact with grill.

WARNING

• Check grease level in tin can often and empty or change when 3/4 full. Use extreme caution as the smoker, tin can and its contents will be hot.

• When grilling, grease from meat may drip into the charcoal and cause a grease fire. If this should happen close lid to suffocate the flame. Do not use water to extinguish grease fires.

• Use caution since flames can flare-up when fresh air sud den ly comes in contact with fire. When opening the lid, keep hands, face and body a safe distance from hot steam and flame flare-ups.

• Never place more than 15 pounds on front shelf. Do not lean on the front shelf.

• Do not exceed a temperature of 400°F. Do not allow charcoal and/or wood to rest on the walls of grill. Doing so will great ly reduce the life of the metal and finish of your grill.

• Use caution when assembling and operating your grill to avoid scrapes or cuts from sharp edges of metal parts. Use caution when reaching into or under grill.

• When opening lid, make sure it is pushed all the way open. If lid is not fully open, it could fall back to a closed position and cause bodily injury.

• In windy weather, place grill in an outdoor area that is protected from the wind.

• Close lid, doors and smoke stack to suffocate flame.

• Never leave coals and ashes in grill unattended. Before grill can be left unattended, remaining coals and ashes must be removed from grill. Use caution to protect yourself and property. Carefully place remaining coals and ashes in a non-combustible metal container and saturate completely with water. Allow coals and water to remain in metal container 24 hours prior to disposing.

• Extinguished coals and ashes should be placed a safe distance from all structures and combustible materials.

• With a garden hose, completely wet the surface beneath and around grill to extinguish any ashes, coals or embers which may have fallen during the cooking or cleaning pro cess.

• After each use, clean the grill thoroughly and apply a light coat of vegetable oil to interior to prevent rusting. Cover the grill to protect it from excessive rusting.

• Use caution when lifting or moving grill to prevent strains and back injuries.

• We advise that a fire extinguisher be on hand. Refer to your local authority to determine proper size and type of fire extinguisher.

• Accessory attachments not manufactured by The Brinkmann Corporation for this particular product are not recommended and may lead to personal injury or property damage.

• Store the grill out of reach of children and in a dry location when not in use.

• Do not attempt to service grill other than normal main te nance as explained in “After-Use Safety” and “Proper Care & Maintenance” sections of this manual. Repairs should be performed by The Brinkmann Corporation only.

• Remove all stickers and labels before first use.

• Properly dispose of all packaging material.

USE CAUTION AND COMMON SENSE WHEN OPERATING YOUR GRILL.

FAILURE TO ADHERE TO SAFETY WARNING AND GUIDELINES IN THIS MANUAL COULD RESULT

IN BODILY INJURY OR PROPERTY DAMAGE.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

20 21

2425

ASSEMBLY INSTRUCTIONS

READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY

BEFORE ASSEMBLING OR OPERATING YOUR GRILL.

FOR MISSING PARTS, PLEASE CALL CUSTOMER SERVICE AT 800-527-0717.

Inspect contents of the box to ensure all parts are included and undamaged.

We recommend two people work together when as sem bling this unit. The following tools are required to assemble this Smoke’N Pit:

• Pliers

• Phillips & Flathead Screwdrivers

• Adjustable Wrench

PARTS LIST - Smoke’N Pit:

2 Handle Coils

2 Handle Axles

4 Handle Stands

1 Temperature Gauge Seat

1 Temperature Gauge

1 Smokestack Damper

Assembly

1 Grill Lid

1 Warming Rack

3 Cooking Grills

2 Charcoal Grate Adjusters

1 Charcoal Grate

1 Charcoal Tray

1 Grill Base

1 Front Shelf

2 Front Table Supports

2 Right Legs

2 Leg Braces

1 Grease Cup Holder

2 Wheels

1 Axle

1 Shelf

2 Left Legs

1 Firebox Support

1 Firebox Base

1 Firebox Air Shutter

1 Firebox Door

This product contains chemicals, including lead in the brass of certain component parts, that are

known to the State of California to cause cancer, and birth defects or other reproductive harm.

Wash hands after handling. When used, this product emits fuel combustion chemicals that are known to

the State of California to cause cancer, and birth defects or other reproductive harm.

CALIFORNIA PROPOSITION 65 WARNING

1 Firebox Door Latch

1 Firebox Door Hinge

1 Firebox Charcoal Grate

2 Firebox Cooking Grills

1 Side Handle

1 Firebox Lid

1 Firebox Lid Stop

Follow all instructions in this manual and use only in well ventilated, outdoor area.

Parts Bag Contents

3 M6 X 25 mm Phillips Head Shoulder Bolts

4 M6 X 12 mm Phillips Head Bolts

58 M5 X 12 mm Phillips Head Bolts

1 M5 X 10 mm Phillips Head Shoulder Bolt

25 M5 Hexagonal Nuts

4 Cotter Pins 1 M6 X Cap Nut 1 M6 Spring 2 M10 Flat Washers 2 M10 Hexagonal Nuts

M6 X 25 mm Phillips Head Shoulder Bolts

M5 X 12 mm Phillips Head Bolts

M5 Hexagonal Nuts

M6 X 12 mm Phillips Head Bolts

Cotter Pins

M5 X 10 mm Phillips Head

Shoulder Bolt

M6 Cap Nut

M6 Spring

M10 Hexagonal NutsM10 Flat Washers

Choose a good, cleared assembly area and get a friend to help you put your grill together. Lay card board down to protect grill finish and assembly area. Turn the grill on its side to begin assembly.

Step 1

Connect right and left legs together (2 pairs). Front pair legs will have two extra holes for front shelf supports as illustrated.

Step 2

Install leg braces with support flange towards center of grill onto the legs using eight M5 x 12 mm Phillips head bolts. Do not tighten until Step 5 in completed. Next, install firebox support bracket onto the holes on the left legs using two M5 x 12 mm Phillips head bolts. Do not tighten until Step 5 in completed.

Front Shelf

Support Holes

Step 3

Attach the shelf to the legs using four M5 ×12 mm Phillips head bolts as illustrated.

Long

Step 4

Put axle through the holes on the right legs and install the wheels using two M10 flat washers and two M10 nuts as illustrated.

Step 5

Install grill base with firebox opening towards left side on top of the legs using four M5 x 12 mm Phillips head bolts. Install two M5 x 12 mm Phillips head bolts and M5 nuts thru grill base and leg braces.

NOTE: Now tighten all screws in Steps 1

thru Step 5.

Step 6

Attach front shelf to front of grill base using two M5 x 12 mm Phillips head bolts and M5 nuts. Attach table supports with slotted holes towards front shelf using four M5 x 12 mm Phillips head bolts.

Step 7

Attach side handle onto firebox lid using two M5 x 12 mm Phillips head bolts and two M5 nuts.

Step 8

Install the handle coil, handle axle and handle stands using two M6 × 12 mm Phillips head bolts. Secure the handle assembly to firebox lid using four M5 × 12 mm Phillips head bolts and four M5 nuts as illustrated.

Step 9

Attach firebox lid stop using one M5 x 12 mm Phillips head bolt and M5 nut.

Step 10

Attach air shutter onto firebox door using one M5 x 12 mm Phillips head bolt and M5 nut. Do not over tighten air shutter, air shutter should move freely.

Attach door latch using one M5 x 10 mm Phillips head shoulder bolt and M5 nut as illustrated.

Step 11

Connect firebox door hinge to the outside of door and firebox base using four M5 x 12 mm Phillips head bolts and M5 nuts.

Attach one M6 x 25 mm Phillips head shoulder bolt onto firebox base for door latch.

Step 12

Connect firebox lid and firebox base using six M5 x 12 mm Phillips head bolts.

Step 13

Connect firebox and grill base together using six M5 x 12 mm bolts.

Step 14

Connect firebox support with firebox base using two M5 x 12 mm Phillips head bolts and M5 nuts.

Step 15

Install smokestack assembly into grill lid using two M5 x 12 mm bolts and M5 nuts.

Step 16

Install smokestack damper and spring onto smokestack assembly. Secure smokestack damper and spring using one M6 cap nut.

Step 17

Install the temperature gauge and temperature thermometer bezel as illustrated.

Step 18

Install the handle coil, handle axle and handle stands using two M6 × 12 mm Phillips head bolts. Secure the handle assembly to lid using four M5 × 12 mm Phillips head bolts and four M5 nuts as

illustrated.

Step 19

Install grill lid on grill base using two M6 x 25 mm shoulder bolts and two cotter pins.

Step 20

Attach the charcoal tray to charcoal grate by hooking tray edges onto grate frame.

Step 21

Use charcoal grate adjusters to lower charcoal grate assembly into grill base. Rest charcoal grate adjusters on supports in grill base.

Charcoal Grate

Adjuster Handles

WARNING: Never hang charcoal grate

from charcoal grate adjuster handles.

Cotter Pin

Step 22

Install the warming rack inside the grill lid. Insert the rack pin through the holes from the outside of grill lid and install two cotter pins.

Align the warming rack support arm holes with the holes on the side panel of grill base.

Step 23

Place cooking grills on support lips of grill base.

Step 24

Place firebox charcoal grate inside the bottom of firebox.

Step 25

Place firebox cooking grills inside the top of firebox base.

Step 26

Insert grease cup holder into holes on right leg brace.

+ 32 hidden pages