B&R Industrial Automation ETAL100.3600-1 User Manual
ETAL100.3600-1
User's manual
Version: 1.00 (December 2020)
Order no.: User's manual
Translation of the original documentation
B&R reserves the right to make changes to the content without prior notice. B&R assumes no liability for typographical errors or for any other information in this document as far as legally possible. Liability claims against B&R
regarding the content of delivery and documentation of third-party components used in the product are excluded
in any case. The user is responsible for compliance with all relevant and professionally pertinent safety measures
as well as the intended use. B&R points out that the software and hardware designations and brand names of the
respective companies are subject to the legal protection regulations of intellectual property law.
ETAL100.3600-1 user's manual V1.00 1
Table of contents
Chapter 1 Introduction.................................................................................................3
1 Manual history....................................................................................................................................................3
2 Organization of notices...................................................................................................................................... 3
Chapter 2 Intended use............................................................................................... 4
Chapter 3 Safety notices............................................................................................. 5
1 Safety notices.....................................................................................................................................................5
2 Usage................................................................................................................................................................. 5
3 Responsibilities of the operator......................................................................................................................... 5
Chapter 4 System characteristics.............................................................................. 6
1 General information............................................................................................................................................6
2 Order data..........................................................................................................................................................6
Chapter 5 Technical data............................................................................................ 7
Chapter 6 Wiring.......................................................................................................... 8
1 Dimensions.........................................................................................................................................................8
2 Cable pinout.......................................................................................................................................................8
Chapter 7 Compatibility...............................................................................................9
1 Power supply......................................................................................................................................................9
Chapter 8 Maintenance..............................................................................................10
1 Repairs/Complaints and replacement parts.....................................................................................................10
Chapter 9 Environmentally friendly disposal.......................................................... 11
1 Separation of materials.................................................................................................................................... 11
2 ETAL100.3600-1 user's manual V1.00
Introduction • Organization of notices
Chapter 1 • Introduction
1 Manual history
Version Date Change
0.10 May 2019 First internal version
1.1 INFOBOX: Current user's manual
Information:
B&R makes every effort to keep documents as current possible. The most current versions can be
downloaded from the B&R website (www.br-automation.com).
2 Organization of notices
Safety guidelines
Chapter 1
Introduction
Contain only information that warns of dangerous functions or situations.
Signal word Description
Danger! Failure to observe these safety guidelines and notices will result in death, severe injury or substantial damage to property.
Warning! Failure to observe these safety guidelines and notices can result in death, severe injury or substantial damage to property.
Caution! Failure to observe these safety guidelines and notices can result in minor injury or damage to property.
Notice! Failure to observe these safety guidelines and notices can result in damage to property.
Contain useful information for users and instructions for avoiding malfunctions.
Signal word Description
Information: Useful information, application tips and instructions for avoiding malfunctions.
European dimension standards apply to all dimension diagrams.
All dimensions in millimeters.
Unless otherwise specified, the following general tolerances apply:
Nominal dimension range General tolerance per
Up to 6 mm ±0.1 mm
Over 6 to 30 mm ±0.2 mm
Over 30 to 120 mm ±0.3 mm
Over 120 to 400 mm ±0.5 mm
Over 400 to 1000 mm ±0.8 mm
DIN ISO 2768 medium
ETAL100.3600-1 user's manual V1.00 3
Intended use
Chapter 2 • Intended use
These products are developed and produced exclusively for training and development in the area of automation.
Any use beyond this is not permitted, in particular the integration of these products or parts thereof in machines,
systems or other devices and processes. B&R does not assume liability for damages of any kind that occur when
using the products outside of training and development or for harm that results from modifying the products. Expansions using products from the ETA system or ETA light system series are permitted.
In addition, the products are only permitted to be used in closed rooms (such as laboratories, offices and classrooms) that do not require separate protective equipment. Trainers shall inform the trainees of the relevant safety
guidelines and precautions before using the product.
4 ETAL100.3600-1 user's manual V1.00
Loading...