Brightstar MCWCUN0033BL User Manual

Step 1: Connect the USB plug to the charging plate

Step 2: Plug the USB connector into the USB power adaptor.

Step 3: Connect the power adapter to the power outlet.

Étape 1: Connectez l'adaptateur USB au chargeur sans fil.

Étape 2: Branchez le câble USB a l'adaptateur secteur mural.

Étape 3: Branchez l'adaptateur mural dans la prise électrique.

3

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against
harmful interference in aresidential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,may cause harmful
interference to radio communications. However, there is noguarantee that interference will not occur in a
particular installation. If thisequipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged totry to correct the
interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.

-Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliancecould void the
user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.