How it Works
Brightstar
Loading...
ASN52
User Manual
32 pgs293.52 Kb0

Brightstar ASN52 User Manual

User Manual
Avvio SN52S/ Avvio SN52
For
Contents
1
MAINMENU...........................................................................................15
2
USERPROFILES............................................................................................21
3
Your Phone
Phone Overview
NO. Keys Short Press Press and
1 Dial key Answer an incoming call.
2 Left soft key/
Twitter
3 Navigation
key/
OK key
4 End key End a call
4
Open a context menu related with
Enter Call log
current screen or Application.
Scroll the cursor
Implement operation
Lock keypad
Return to IDLE mode
Hold
Enter Twitter
Power on/off
5 Right soft key/
Facebook
6 Keypad Input the corresponding characters
Enter Phonebook
Open the previous screen.
Enter facebook
Getting Started
Battery
The battery at its initial condition is charged to 50% full, and can be used
Removing and installing battery
A. Push the battery back cover;
B. Lift the battery up as indicated by the arrow;
after unwrapping.
For removing:
C. Take the battery out.
A. Place the metal contact points of the battery upward and flush
For installing:
with metal contact points in the battery bay, then insert the bottom of
battery into battery bay.
6
B. Place the back cover of the battery onto the phone squarely,
and push in the direction of the arrow till it clicks into place.
While charging, the power supply indicator at phone’s screen icon zone
Charging Battery
will flash in a rotation manner, if the phone is off while charging, a charging screen will still appear, indicating that the phone is recharging. If the phone is still being overused while the power supply is insufficient,
the recharging indicator will appear on the screen after the recharging
has started for a while.
When the power supply indicator at the screen’s icon zone shows full
and stops flashing, it means charging has completed. If it takes place
when the phone is off, the screen will display charging-finished icon.
The process generally takes about 2.5 hours. It is normal that the
battery, the phone and the charger will become hot during the charging
process.
Once charging is completed, disconnect the phone and the charger from
the AC power supply.
7
Note: Battery must be charged in a well ventilated place with surrounding temperature at -10℃~+55℃, and it is imperative that a charger provided by manufacturer is used. Using unauthorized charger might cause danger, which also violates warranty terms prescribed by the manufacturer. If the charging temperature is too high or too low, the phone will automatically give warning and stop charging, so as to prevent damages to battery.
Connecting to Network
A valid SIM (Subscriber Identity Module) card must be inserted in the
All information related to making connection to the network are recorded in the chips of SIM card, including the names, phone numbers and short
messages you have stored in the SIM card Phone book. In order to
prevent loss or damage of the info in the SIM card, it is necessary to
avoid touching metal contact surface, and keep SIM card far from
electricity current and magnet.
SIM card
phone before using it.
Inserting and removing SIM card
Power off the phone; remove battery and other external power
When you need to remove SIM card, please power off the phone first,
8
connection, as shown in the image.
Insert SIM card into SIM card socket.
remove battery, then remove the card.
Inserting and removing memory card
Power off the phone; remove battery and other external power
connection.
Insert memory card into card slot as shown in the image.
9
Power on/off phone
To power on, please press and hold the Power key. Then the screen will
display the prompts like Enter phone password, SIM card password in sequential order as per the setting done by user. Once the appropriate password is entered, the phone will search for network connection and
latch accordingly to the appropriate network.
To power off, please press and hold the Power key.
PIN and PUK
To prevent illegal usage, PIN (Personal Identification Number) code is
adopted to encrypt for protection of your SIM card. Selecting this option
and if having set up PIN code protection, you have to enter PIN code
Enter PIN code,
For instance, if PIN setting is 1234, then enter the following input: 1 2 3
If there are three consecutive input errors, your SIM card will be locked
Note: Your service provider will set up a standard PIN (4 to 8 digits) number for your SIM card; you should change it into your private password as soon as possible. PUK code will be provided by the network provider.
10
each time you power on the phone.
Press and hold the Power key to close the phone;
use clear to delete input-errors, Tap "OK" key for end.
4 "OK".
up by the network, the phone will inquire PUK code.
Loading...
+ 22 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use