INTRODUCTION
1 Keys Specification
1.1 Keys specification
General keypad definitions:
Left soft key Generally indicates Confirmation
Right soft key Generally to delete or clear a letter or number.
Navigation key Generally to move the cursor.
#key Switch between different input methods.
*key show the Symbols interface.
Call key Generally to call the number.
End key Generally to end a call.
1 key ,.?!1
2 key ABC,abc,2
3 key DEF, def.3
4 key GHI, ghi, 4
5 key JKL, jkl, 5
6 key MNO, mno, 6
7 key PQSR, pqsr, 7
8 key TUV, tuv, 8
9 key WXYZ, wxyz, 9
0 key 0, space
2 User Guide
2.1 Installing/ Removing the battery/SIM card.
Installation Notice
Before you install or remove the battery and the SIM card, please make sure to turn off the mobile
phone.
1) Removing the battery.
Step1:
Step2:
Remove the back cover.
Remove the battery from the battery slot properly.
2) Inserting/Removing the SIM card.
Step3:
Insert/Remove the SIM card.
Step4:
Insert the battery
Place the Back cover on.
2.2 Charging the battery
Plug the charger into the electrical outlet.
Plug the charger connector into the mobile phone
The Battery indicator icon starts to flash until charging is finished.
When charging is complete, disconnect the charger connector from the mobile phone
and unplug the charger from electrical outlet.
The operating temperature range is -10~55°C