Briggs & Stratton SNAPPER 7800757, SNAPPER 7800708, SNAPPER 7800756, SNAPPER 7800707 User Manual
Not for
Reproduction
Parts Manual fo
r
6
7
7
8
22" VARIABLE SPEED 3N1
WALK BEHIND MOWERS
DescriptionModel No.
780075
780075
780070
780070
NSXPV2270
NSXPV2270E
SPXV2270
SXPV2270E
Briggs & Stratton Yard Power Products Group
535 Macon Road
McDonough, GA, 30253 U.S.A.
800-935-2967
Manual No.
Revision:
7104293
B 5/13/2011
Not for
Reproduction
Not for
Reproduction
s
PAGE GROUP
4
6
8
10
12
14
16
18
Handle & Controls Group (Manual Start)
Drive Control Assembly (Manual Start)
Handle & Controls Group (Electric Start)
Drive Control Assembly (Electric Start)
Mower Deck Group
Engine, Blade & Grass Bag Group
Transmission & Wheels Group
Decals Group
Table Of Content
22" VARIABLE SPEED 3N1
Manual No.
3
TP 400-5481-B-WB-N
7104293
Not for
Reproduction
Handle & Controls Group (Manual Start)
Manual No.
7104293 22" VARIABLE SPEED 3N1
4
Not for
Reproduction
Handle & Controls Group (Manual Start)
Part No DescriptionItem Qty
1 7090015 1 BOLT, 1/4-20 x 1-3/4” Round Head Square Neck, GR 2, YZ
2 7090391 4 WASHER, 5/16” Internal Tooth Lock
3 7090951 2 NUT, 5/16-18 Large Flange Center Lock
4 7091189 2 BOLT, 5/16-18 x 2” Curved Head Square Neck, GR 2
5 723873 2 BOLT, 5/16-18 x 3/4” Square Neck Carriage, GR 5
6 1931338 2 BOLT, 5/16-18 x 1-3/4” Round Head Square Neck Carriage
7 2860694 2 NUT, 1/4-20 Hex Flange (Esna), YZ
8 7024649 2 WIRE TIE, 11 Inch Standard Black Nylon
9 7101410 1 ROPE GUIDE, (1/4-20 thread)
10 7102990 4 KNOB, Handle, (5/16-18 internal threads) 5-Prong
11 7103774 1 METER, Service Indicator
12 7300649BH 2 HANDLE, Connecting, 21” / 22” WBM
13 7301189BH 1 HANDLE, Lower
14 7501967 1 ASSEMBLY, Drive Control, MY2010 Walk
Footnotes:
7800707, 7800756 & 7800774
Manual No.
5
710429322" VARIABLE SPEED 3N1
Not for
Reproduction
Drive Control Assembly (Manual Start)
Manual No.
7104293 22" VARIABLE SPEED 3N1
6
Not for
Reproduction
Drive Control Assembly (Manual Start)
Part No DescriptionItem Qty
1 7091075 1 SCREW, #10-24 x 5/8” Hex Washer Self-Tap, GR 5 BZ
2 7091195 4 SCREW, #10-16 x 3/4” Pan Head Self-Tap Combo, BZ
3 1960593 1 NUT, #10-24 Speed Retainer w/extrusion
4 7102803 2 LEVER, Drive Control
5 7102804 2 LEVER, OPC, Control
6 7102805 1 CAM, Drive, LH
7 7102806 1 CAM, Drive, RH
8 7103325 1 CONTROL PANEL, Bottom, MY Mower
9 7103326 1 PANEL, Bottom Control, WBM, RH
10 7103327 1 PANEL, Bottom Control, WBM, LH
11 7103456 1 PANEL, Access, Maintenance Reminder
12 7104294 1 PANEL, Top Control
13 7104689 1 SPRING, Tension, Drive Control
14 7104752 1 CABLE, OPC, 2010 NXT
15 7105092 1 CABLE, Control, 2010 NXT (Was 7103770)
16 7900081 4 SCREW, #10-16 x 2” Hi-Lo Cross Pan Head
Footnotes:
Model pt. #'s: 7800707, 7800756 & 7800774
Manual No.
7
710429322" VARIABLE SPEED 3N1
Not for
Reproduction
Handle & Controls Group (Electric Start)
Manual No.
7104293 22" VARIABLE SPEED 3N1
8
Not for
Reproduction
Handle & Controls Group (Electric Start)
Part No DescriptionItem Qty
1 7028765 1 SWITCH, ES, Start/Run
2 7102990 4 KNOB, Handle, (5/16-18 internal threads) 5-Prong
3 7090015 1 BOLT, 1/4-20 x 1-3/4” Round Head Square Neck, GR 2, YZ
4 7090391 4 WASHER, 5/16” Internal Tooth Lock
5 7090951 2 NUT, 5/16-18 Large Flange Center Lock
6 7091189 2 BOLT, 5/16-18 x 2” Curved Head Square Neck, GR 2
7 1931333 2 BOLT, 5/16-18 x 3/4” Round Head Short Square Neck Carriage, GR 5
8 2860694 2 NUT, 1/4-20 Hex Flange (Esna), YZ
9 7023506 1 BEZEL, Black
10 7024649 4 WIRE TIE, 11 Inch Standard Black Nylon
11 7101410 1 ROPE GUIDE, (1/4-20 thread)
12 7102931 1 BATTERY, 12V DC, 1.3A / HR
13 7103774 1 METER, Service Indicator
14 7104149 1 NUT, Plastic, 5/8-32
15 7300649BH 2 HANDLE, Connecting, 21” / 22” WBM
16 7301189BH 1 HANDLE, Lower
17 7502046 1 ASSEMBLY, Drive Control, Snapper Electric Start
18 1931338 2 BOLT, 5/16-18 x 1-3/4” Short Square Neck Carriage, GR 5
19 7011138 1 KEY, Ignition, Pair
20 7103988 1 CHARGER, Battery, 14V 260MA, 120V AC
Footnotes:
Model pt. #'s: 7800708, 7800757 & 7800775
Manual No.
9
710429322" VARIABLE SPEED 3N1
Not for
Reproduction
Drive Control Assembly (Electric Start)
Manual No.
7104293 22" VARIABLE SPEED 3N1
10
Not for
Reproduction
Drive Control Assembly (Electric Start)
Part No DescriptionItem Qty
1 7091075 3 SCREW, #10-24 x 5/8” Hex Washer Self-Tap, GR 5 BZ
2 7091195 4 SCREW, #10-16 x 3/4” Pan Head Self-Tap Combo, BZ
3 1960593 3 NUT, #10-24 Speed Retainer w/extrusion
4 7102803 2 LEVER, Drive Control
5 7102804 2 LEVER, OPC, Control
6 7102805 1 CAM, Drive, LH
7 7102806 1 CAM, Drive, RH
8 7103325 1 CONTROL PANEL, Bottom, MY Mower
9 7103326 1 PANEL, Bottom Control, WBM, RH
10 7103327 1 PANEL, Bottom Control, WBM, LH
11 7103345 1 ACCESS DOOR, Battery Control Panel, WBM
12 7103456 1 PANEL, Access, Maintenance Reminder
13 7104395 1 HARNESS, Snapper React Drive
14 7104396 1 PANEL, Top Control
15 7104689 1 SPRING, Tension, Drive Control
16 7104752 1 CABLE, OPC, 2010 NXT
17 7105092 1 CABLE, Control, 2010 NXT (Was 7103770)
18 7900081 4 SCREW, #10-16 x 2” Hi-Lo Cross Pan Head
Footnotes:
Model pt. #'s: 7800708, 7800757 & 7800775
11
Manual No.
710429322" VARIABLE SPEED 3N1
Not for
Reproduction
Mower Deck Group
Manual No.
7104293 22" VARIABLE SPEED 3N1
12
Not for
Reproduction
Mower Deck Group
Part No DescriptionItem Qty
1 7600155D 1 DECK, 22”, Rear Wheel Drive, Washout (used on 7800756 & 7800707 models)
1 7600159D 1 DECK, 22", Rear Wheel Drive, Washout, Electric Start (used on 7800757 & 7800708 models)
2 7300885BH 1 BRACKET, Lower Handle, LH, 22 WBM
3 7300915BH 1 BRACKET, Lower Handle, RH, 22 WBM
4 7103298 1 COVER, Mulching
5 7103299 1 CHUTE, Side Discharge, 22” WBM
6 7103295 1 COVER, Front, Push/Rear Wheel Drive
7 7091020 3 PUSHNUT, 1/4”
8 7101067 1 ROD, Pivot
9 7900067 6 SCREW, 1/4-20 x .550 Self-Tap (Torx)
10 722507 1 SPRING, Torsion
11 7300855D 1 BRACKET, Chute
12 7900073 2 BOLT, 1/4-20 x 1-1/2” Shoulder
13 7090699 4 BOLT, 1/4-20 x 3/4” Hex Flange Lock, GR 5
14 7103296 1 DEBRIS SHIELD, Front
15 7103323 1 GUARD, Rear 22”
16 722398 3 NUT, 1/4-20 Hex Flange Lock
17 7501541 1 ASSEMBLY, Door, 22” WBM (Incl. items 7, 29, 30, 31 & 32)
18 1960518 3 BOLT RETAINER, 1/4”
19 7091075 2 SCREW, #10-24 x 5/8” Hex Washer Face Self-Tap, GR 5
20 1960593 2 NUT, #10-24 Retainer Speed w/extrusion
21 7103453 1 PLUG, Mulching, 22” Deck
22 7900018 2 SCREW, Round Washer Head Torx, Hi-Lo
23 7090803 3 BOLT, 1/4-20 x 5/8” Flat Head Square Neck, GR 5
24 7023295 4 U-NUT, 1/4-20
25 7103293 1 BAFFLE, Rear, Rear Wheel Drive WBM
26 7104819 1 BELT COVER, Rear Drive (Was 7103294)
27 7900079 2 PUSH NUT, 3/16”
28 7301020 1 BAFFLE, Front
29 7103292 1 HINGE, Rear Discharge Door
30 7103309 1 SPRING, Torsion, Rear Door
31 7103322 1 ROD, Pivot, Rear Door
32 7103291 1 DOOR, Rear Discharge
33 7103957 1 WASHER, Hose
34 7103804 1 ADAPTOR, Washout Port, WBM
35 7103919 1 COUPLING, Hose
36 7091546 1 WASHER, 5/8” Internal Tooth Lock YZ (Was 7090880)
37 1960716 1 NUT, 5/8-11, NC-2B Black Hex Jam
Footnotes:
13
Manual No.
710429322" VARIABLE SPEED 3N1
Not for
Reproduction
Engine, Blade & Grass Bag Group
Manual No.
7104293 22" VARIABLE SPEED 3N1
14
Not for
Reproduction
Engine, Blade & Grass Bag Group
Part No DescriptionItem Qty
1 7900072 3 SCREW, 3/8-16 x 1-1/4” Hex Washer Self-Tap
2 7103517 2 BELT GUIDE, Engine
3 7100437 1 PULLEY, Engine
4 7092086 1 SET SCREW, 5/16-18 x 1/2” Hex Recess
5 7091214 1 KEY, #HP-506 Hi-Pro
6 7101414 1 BLADE HUB, 21” WBM, Rear Drive, 2 Position
7 7103288BZ 1 BLADE, Wave, Steel Deck
8 7012063 1 WASHER, Cone
9 7090167 1 SCREW, 3/8-24 x 2” Hex Head Cap, GR 5
10 7103305A 1 BAG FRAME, Rear Discharge (weldment)
11 7103375 1 GRASS BAG, 22” Rear Discharge
12 128L02 0115 F1 1 * ENGINE, B&S, 700 Series, X-Spec (used on 7800756 model)
12 128L05 0116 F1 1 * ENGINE, B&S, 700 Series, ES, X-Spec (used on 7800757 model)
12 128T02 0740 B3 1 * ENGINE, B&S, 700 Series, B3, X-Spec (used on 7800707 model)
12 128T05-0110-B1 1 * ENGINE, B&S, 700 Series, Quantum, ES (used on 7800708 model)
Footnotes:
NOTE: * Purchase engine parts from engine manufacturer dealer.
15
Manual No.
710429322" VARIABLE SPEED 3N1
Not for
Reproduction
Transmission & Wheels Group
Manual No.
7104293 22" VARIABLE SPEED 3N1
16
Not for
Reproduction
Transmission & Wheels Group
Part No DescriptionItem Qty
1 7103312 1 TRANSMISSION, Variable Speed, Rear Wheel Drive
2 7400259 1 WELDMENT, Rear Crossbar, RWD
3 7400306 1 WELDMENT, Front Axle
4 7091195 2 SCREW, #10-16 x 3/4” Pan Head Self-Tap, Combo
5 7100863 1 BELT GUIDE, Transmission
6 7103364 1 BELT, 3L, Traction Drive, 22” WBM, RWD (3L Sect., 33.83” Effective Length)
7 7091585 5 NUT, 3/8-16 Hex Center Lock, YZ
8 7100240 1 PULLEY, Transmission Variable Speed, LC WBM
9 7101350 4 HUBCAP, 8” & 9” Spoked Wheel, Snapper Cool Gray (was 7102507)
10 722604 4 WASHER, 1” OD x .387 ID, Flat
11 7027999 2 RETAINING RING, .452-.463 ID (Waldes Truarc 5100-50 or equivalent)
12 7100861 2 PIN, Axle
13 7100820 2 GEAR, Pinion
14 7014341 2 RETAINING RING, .392 Ext. (Waldes No. 5133-50 or equiv.)
15 7091591 4 BOLT, 5/16-18 x 1” Hex Flange Lock, GR 5, YZ
16 7103290 2 HOLDER, Bearing, Rear Wheel Drive
17 7078243 2 BALL BEARING, Axle
18 1931277 4 NUT, 5/16-18 Hex Flange Lock, GR 5, YZ (Was 7091601)
19 7500539 2 WHEEL ASSEMBLY, 9 x 2 Drive, Snapper Tread, w/Ext Gear (includes ball bearings #7101380,
gear #7100914, & screws #7091196)
20 7101367 2 SHIELD, Dust, 21” WBM, RD
21 724887 1 GRIP, Height-Of-Cut
22 7103289 1 LEVER, Spring, Height-Of-Cut
23 7900067 6 SCREW, 1/4-20 x .550 Self-Tap (Torx)
24 7101774 2 SHOULDER BOLT, #10-24
25 7103306D 1 ROD, Lifter Link, WBM
26 7091552 2 WASHER, .219 x .500 x .049 Flat
27 7091290 2 NUT, #10-24 UNC-2B Nyloc
28 7104525 2 SPACER, Shaft, 1/2”
29 7104518 4 BUSHING, Bearing, Rear Wheel Drive
30 7500540 2 WHEEL ASSEMBLY, 8 x 2 Idle, Snapper Tread, Charcoal Gray (includes two ball bearings, p/n
7101380)
Footnotes:
17
Manual No.
710429322" VARIABLE SPEED 3N1
Not for
Reproduction
Decals Group
Manual No.
7104293 22" VARIABLE SPEED 3N1
18
Not for
Reproduction
Part No DescriptionItem Qty
1 7104747 1 DECAL, Start, React
2 7104744 1 DECAL, Drive, React
3 7104746 1 DECAL, Stop, React
4 7104745 1 DECAL, Run, React
5 7101394 1 DECAL, Warning, Rear Discharge Door
6 7102275 1 DECAL, Customer Service, MY08, Snapper
7 7104852 1 DECAL, Briggs Engine, 700 Series
8 7104875 1 DECAL, Briggs Engine, Front Cover “SPX” Series
9 7103963 1 DECAL, Front Shroud, Snapper Logo
10 7103970 1 DECAL, Battery
11 7103965 1 DECAL, Handle, Domed Turtle
12 7104762 1 DECAL, Handle, React Drive
13 7102746 1 DECAL, Spark Arrestor
14 7013010 1 DECAL, Danger, Cut Finger
Decals Group
Footnotes:
19
Manual No.
710429322" VARIABLE SPEED 3N1
Not for
Reproduction
Not for
Reproduction
Not for
Reproduction
Not for
Reproduction
Not for
Reproduction
Parts Manual fo
r
22" VARIABLE SPEED 3N1
WALK BEHIND MOWERS
IT IS THE POLICY OF BRIGGS & STRATTON CORP TO IMPROVE ITS
PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO.
WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD
IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY
OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS
Briggs & Stratton Yard Power Products Group
535 Macon Road
McDonough, GA, 30253 U.S.A.
800-935-2967
www.snapper.com
Copyright ©
Milwaukee, WI USA. All Rights Reserved
Briggs & Stratton Corporation
2011
Manual No.
Revision: B 5/13/2011
7104293
Loading...