Briggs & Stratton 272147, 275072, 272144, 247041, 270962 User Manual

BRIGGS&STRATTON

Accessories Catalog

Air Cleaners
Controls
Exhaust
Fuel
Lubrication
Snow Blower Equipment
Grease & Hand Cleaners
Lubricants & Cleaners
Starters
Batteries & Battery Accessories
Miscellaneous
Generator Accessories
Pressure Washer Accessories
3 L/C Engine Options

TABLE OF CONTENTS

AIR CLEANERS

DUAL ELEMENT AIR CLEANER KITS . . . . . . . . . . . . . . . . . 1

REMOTE AIR INTAKE KITS . . . . . . . . . . . . . . . . . . . . . . . . 1

TWO STAGE CENTRIFUGAL AIR CLEANER . . . . . . . . . . . . 2

CONTROLS

THROTTLE CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

REMOTE THROTTLE CONTROL BRACKET . . . . . . . . . . . . . 4

REMOTE CHOKE ADAPTER . . . . . . . . . . . . . . . . . . . . . . . . 4

EXHAUST

STANDARD MUFFLER DEFLECTORS,
STANDARD MUFFLER LOCKNUTS &

EXHAUST ELBOWS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

MUFFLERS, GUARDS, MANIFOLDS, KITS,
BRACKETS, ADAPTERS, DEFLECTORS & SPARK
ARRESTERS

Models 60000, 80000, 90000 & 110000 . . . . . . . . . . . . 6

Vanguard™ Models 85400, 115400 & 117400 . . . . . . . . 6

Models 90000, 93400, 10A900 & 110000 . . . . . . . . . . . 7

Models 99700, Quantum® 100000 & 120000 . . . . . . . . 8

Intek™ Models 110400, 111400, 120400,
121400, 123400, 124400, 126400, 127400,

128400 & Vanguard™ 118400 . . . . . . . . . . . . . . . . . . . . 9

Intek™ Models 110600, 111600, 121400,

121600, 126600 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Intek™ Models 12A400, 12B400, 12C400 &

12D400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Model 130000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Models 133400 & 138400 . . . . . . . . . . . . . . . . . . . . . . 13

Models 170000, 185400 & 190000 . . . . . . . . . . . . . . . 14

Model 190000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Models 20A400, 20B400, 20C400, 20D400,
20E400, 20F400, 20G400, 201400, 202400,

203400, 204400, 205400, 206400, 207400 . . . . . . . . . 16

Models 21A400, 210400, 21A800, 21A900,

21B900, 212700, 212900 . . . . . . . . . . . . . . . . . . . . . . . 17

Models 220000 & 250000 . . . . . . . . . . . . . . . . . . . . . . 18

Models 230000, 235400, 240000, 245400 &

320000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Model 280000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Models 28AH00, 28CH00, 31G700 & 28N700 . . . . . . . 21

Models 28P700, 28Q700, 311700 & 312700 . . . . . . . . 22

Vanguard™ Models 290000, 300000 &

350000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Vanguard™ Models 290000, 300000 & 350000 . . . . . . 24

Vanguard™ Models 290000, 300000, 350000

& 380000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Vanguard™ Models 380400, 380700, 381400

& 381700 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Models 400000, 420000, Intek™ 405700,

406700, 407700, 445700, 446700 . . . . . . . . . . . . . . . . 27

Vanguard™ Models 540000 & 543400 . . . . . . . . . . . . . 28

FUEL

FUEL TANKS FOR REMOTE MOUNTING . . . . . . . . . . . . . 29

FUEL SHUT-OFF VALVES, IN-LINE FUEL FILTERS . . . . . . 29

FUEL STRAINERS, FUEL GAUGES . . . . . . . . . . . . . . . . . . 30

FUEL LINES, FUEL CLAMPS . . . . . . . . . . . . . . . . . . . . . . 30

FUEL CANS, FUEL STABILIZERS, & FRESH START™ . . . . 31

FUEL CANS, FUEL CONTAINER SUMMARY . . . . . . . . . . . 32

LUBRICATION

OIL, GEAR LUBE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

OIL GARD® KITS, EXTENDED OIL FILL KITS . . . . . . . . . 34

DIPSTICKS, VALVE COVER OIL FILL . . . . . . . . . . . . . . . . 34

OIL MINDERS, OIL FILTER ADAPTER,

OIL DRIP TRAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

REMOTE MOUNTING OIL FILTER KITS . . . . . . . . . . . . . . 35

OIL DRAIN PLUGS & FITTINGS . . . . . . . . . . . . . . . . . . . . 36

OIL PRESSURE SWITCH, OIL DRAIN VALVE

AND HOSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

SNOW BLOWER EQUIPMENT

BLOCK HEATERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

GREASE & HAND CLEANERS

THREAD COMPOUND AND ANTI-SEIZE
LUBRICANT, GREASE GUN KIT & REFILL,

HAND CLEANERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

LUBRICANTS & CLEANERS

LUBRICANTS, CARBURETOR CLEANERS,
DEGREASERS, FOGGING OIL, BATTERY

TERMINAL PROTECTOR, PENETRATING OIL . . . . . . . . . 38

STARTERS

12 AND 120 VOLT ELECTRIC STARTER KITS . . . . . . . . . 39

120 AND 230 VOLT ELECTRIC STARTER

KITS, IGNITION SWITCHES . . . . . . . . . . . . . . . . . . . . . . . 40

STARTER PANELS, STARTER SOLENOID . . . . . . . . . . . . 41

REWIND STARTER GUARDS & HANDLE . . . . . . . . . . . . . 41

ROPE GUIDE, SPARK PLUG SHIELD . . . . . . . . . . . . . . . . 42

DEBRIS GUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

TABLE OF CONTENTS

BATTERIES & BATTERY ACCESSORIES . . . . . . . . . . 43

MISCELLANEOUS

AMMETER & HOUR METER, DIGITAL TACHOMETER . . . 44

STUB SHAFT KITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

STUB SHAFT & ALIGNMENT PIN COMBINATIONS . . . . . 45

FIX-A-THREAD KITS, AEROSOL SPRAY PAINT . . . . . . . . 46

MAINTENANCE MINDER™, NORAM™

REDUCTION GEAR BOXES . . . . . . . . . . . . . . . . . . . . . . . . 47

ADAPTER PLATE, SPACER KIT, SPARK

PLUGS, TIRE SEALANT, OIL PUMP KIT . . . . . . . . . . . . . . 48

BRIGGS & STRATTON POWER PRODUCTS
GENERATOR ACCESSORIES

STORAGE KITS, WHEEL KITS, FUEL GAUGES . . . . . . . . . 49

12-VOLT BATTERY CHARGE CABLES . . . . . . . . . . . . . . . 49

WEATHERGUARD KIT, TRANSFER SWITCH . . . . . . . . . . 50

GENERATOR ACCESSORY MATRIX . . . . . . . . . . . . . . . . 50

BRIGGS & STRATTON POWER PRODUCTS
PRESSURE WASHER ACCESSORIES

WASHES, DEGREASER, BRUSHES, WAND,

HOSES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

SPRAY TIP, WANDS, SPRAY NOZZLE, SIPHON

NOSE & FILTER, BRUSH KIT, WATER BROOM . . . . . . . . . 52

POWER WASHER ACCESSORY MATRIX CHART . . . . . . . 53

EXTENSION, BRUSH, QUICK CONNECTS,
ADAPTERS, PUMP SAVER, QUICK CONNECTS,

CLEANING KIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

3L/C ENGINE OPTIONS

ELECTRICAL CONNECTORS, FAN MOTOR KIT . . . . . . . . 55

FUEL FILTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

STARTER RELAY, DIGITAL TACHOMETER AND
HOURMETER, TRANSDUCER, TINY TACH

ADAPTER, RESERVE TANK FOR RADIATOR . . . . . . . . . . 56

3 CYLINDER VANGUARD™ LIQUID COOLED . . . . . . . . . . 57

MANUALS/CD’S

Technical Manuals, Troubleshooting

Guides & Parts Catalogs . . . . . . . . . . . . . . . . . . . . . . . . . 58

NOTES

CAUTION: • Outlets on muffl er defl ectors must not point towards fuel tank, carburetor or air cleaner.

• Spark arresters are U.S. Forest Service approved.

• Muffl er guards, labeled TUV in the illustrations, have passed European Safety Standards.

• Where part numbers of individual fasteners are shown, they must be ordered separately.

• See IPLs for other date codes, mounting hardware, P/Ns and specifi c parts replacement Information.

• Because Briggs & Stratton engines power a wide range of equipment, space limitations or interference may prevent
using an accessory on an application. Check equipment for potential interference before ordering any accessory.

ii

AIR CLEANERS

DUAL ELEMENT AIR CLEANER KITS

Extends service intervals. Combines proven features of
automotive type paper cartridge and Oil-Foam pre-cleaner
for longer life.

Part No. Models

393766 2 and 3 HP horizontal crankshaft engines
with 2-piece  o-jet carburetors only and
2 through 5 HP horizontal and vertical
crankshaft engines equipped with Vacu­ Jet and Pulsa-Jet carburetors with oil
foam air cleaners only.

Part No. Models

393459 7 and 8 HP horizontal
crankshaft engines with 2-piece
 o-jet carburetors only.

Part No. Models

399644 10 and 11 HP vertical crankshaft
engines with 1-piece  o-jet carburetors
(pre world class carburetors only)
Features larger capacity automotive type
paper cartridge and Oil-Foam
pre-cleaner for extended life.

Note: Stud in this kit has a #10-32 UNF-2A thread.

REMOTE AIR INTAKE KITS

Part No. Models

498204* Kit for Quantum® power engines
(including mounting hardware).
Mount intake head at a remote location,
e.g., handle bar. (Does not include air
cleaner element)

*Do not use these remote air intake kits on engines built
after code date 95073100.

1

AIR CLEANERS

REMOTE AIR INTAKE KITS

Part No. Models

492206 Kit for 5 HP horizontal crankshaft engines
equipped with air cleaner design as
shown. Mount hood at a remote location.

Part No. Quantity Description

494345 1 Tubing kit (3 ft/.9m hose
and 2 hose clamps,
part number 94489)

492178 1 Air cleaner cover
492179 1 Hood

Part No. Models

690909* Air cleaner base for Models 294400,
303400 and 350400 Vanguard™ V-Twin
engine remote air cleaner. (Remote parts
not supplied by Briggs & Stratton.)

*Do not use these remote air intake kits on engines built
after code date 95073100.

825118

TWO STAGE CENTRIFUGAL AIR CLEANERS

Part No. Description

825117 Housing &  lter assembly, straight end,
for 2 & 3 cylinder L/C engines

825118 Housing &  lter assembly, 90 degree
end, for 2 & 3 cylinder L/C engines

820263 Filter only for assemblies 825117 and
825118

809670 Housing &  lter assembly for 31 HP

(540000) air-cooled V-Twin

841497 Filter for 809670
821136 Safety  lter for 809670

2

CONTROLS

THROTTLE CONTROLS

Part No. Description

691028 Speed control
level assembly
Order control wire and wire casing (inset) separately.

Part No. Description Length

691026 Control wire 78 inches
691025 Wire casing 72 inches
93907 Control wire 100 feet
93908 Wire casing 50 feet

Disc type throttle control allows for remote speed
operation.

Part No. Models (horizontal crankshaft
and 2-piece flo-jet carburetor)

290062 80000 and 130000 with  oat feed
carburetor

291460 170000, 190000, 200000 and 2300002

299361 220000, 240000, 250000, 300000
and 320000

Part No. Models

494052 Throttle control for Vanguard™ V-Twin
horizontal crankshaft models. Includes
panel, lever, control wire, rocker switch,
decal and mounting hardware.

Speed control lever assembly for Vanguard™ V-Twin
horizontal crankshaft models.

Part No. Models

692541 Lever-Control (Used with control lever
and/or wire with a “Z” formed end).

692105 Lever-Control (Cable wire with an “L”
formed end).

3

CONTROLS

REMOTE THROTTLE CONTROL BRACKET

Part No. Models

715295 Remote throttle control bracket for
Vanguard™ Model 115400 (control cable
not supplied by Briggs & Stratton).

REMOTE CHOKE ADAPTER

Part No. Models

497201 Remote choke adapter kit for 170000,
190000, 220000 & 250000 Industrial
Plus™ engines. It includes a
choke cable bracket, self-tapping screw,
casing clamp and screw.

4

STANDARD MUFFLER DEFLECTORS

STANDARD MUFFLER DEFLECTORS

EXHAUST

Engine Models

60000, 80000, 90000

100000, 110000, 120000

85400, 110400, 111400, 115400,

117400, 120400, 121400, 123400,

138400, 185400

*130000, 170000, 190000 393757 395700 393758 None None

220000, 230000, 235400,
240000, 245400, 250000,
280000, 290000, 300000,
311700, 320000, 350000,

380000, 400000, 420000

*Shallow side out de ector 494423 required with some model 130000 guards (see page 10).
De ectors will not  t over spark arrester.

Side out

De ector

393760 397931 None 396548 393756

393757 395700 393758 None None

393761 396903 397630 None None

Direct out

De ector

Louvered

De ector

Louvered

De ector

Side out

De ector

STANDARD MUFFLER LOCKNUTS & EXHAUST ELBOWS

Engine Models National Pipe

45 Љ 90 Љ

None None

60000, 80000,

90000, 110000

100000, 130000,

170000, 190000
400000, 420000

220000, 230000,
240000, 250000,

280000, 320000

Thread

1/2" (13 mm)

3/4" (19 mm) 690453 None 692835 94089 94092

1" (25 mm)

Locknut

691720

691808 91415 91296 None 690281

45 Љ

Street Elbow

None

690291

90 Љ

Street Elbow

91812

(60000 only)

91943

5

EXHAUST

MODELS 60000, 80000, 90000 & 110000 HORIZONTAL CRANKSHAFT (1/2” OR 13 MM NPT)

Muf er Guard De ector Spark Arrester

TUV

493288

Oval Lo-Tone

691360

Super Lo-Tone

TUV

690664

691186

691194

690789

398160

(model 82000 with fl oat carburetor)

(See Page 5)

690367

398067

397931

(this

defl ector

only with these

guards)

490571

(model 82000 with pulsa-jet carburetor)

VANGUARD™ MODELS 85400, 115400 & 117400 HORIZONTAL CRANKSHAFT

Muf er Guard De ector Spark Arrester Bracket

710074

715487

Lo-Tone

Note: Muf er brackets are for optional use on high vibration applications.

710332

715230

715491

6

715287

EXHAUST

MODELS 90000, 10A900 & 110000 VERTICAL CRANKSHAFT (1/2” OR 13 MM NPT)

Muf er Guard De ector Spark Arrester

TUV



394569S

Round Lo-Tone

692307

Super Lo-Tone

(See Page 5)

699670

TUV

691693

398067

396548

493967

TUV

397931

MODEL 93400 HORIZONTAL CRANKSHAFT

Muf er Guard De ector Spark Arrester Bracket

TUV

692365

Super Lo-Tone

691693

692368

691685

699299

692010

690813

690526

7

EXHAUST

MODEL 99700 VERTICAL CRANKSHAFT

Muf er Guard De ector Spark Arrester

TUV

494717

Super Lo-Tone

QUANTUM® MODELS 100000 & 120000 VERTICAL CRANKSHAFT

Muf er Guard De ector Spark Arrester

TUV

494719

(Not

Available)

493662

494224

TUV

496106S

493871

Super Lo-Tone

499034

398067

TUV

494343S

Square Lo-Tone

691424

697915

692957

8

EXHAUST

INTEK™ MODELS 110400, 111400, 121400 & 123400 (SINGLE CYLINDER) HORIZONTAL
CRANKSHAFT

Muf er Guard De ector Spark Arrester Bracket

699204

691108

694460

7/8” Opening

694429

691665

697818

691003

692010

690813

691893

691665

692237

699232

INTEK™ MODELS 110400, 111400, 120400 & 121400 AFTER DATE CODE 98071900 & 123400
(SINGLE CYLINDER) HORIZONTAL CRANKSHAFT

Muf er Guard De ector Spark Arrester Bracket

393757

395700

691685

692595

691685

699229

691665

692237

693593

693624

690661

693583

VANGUARD™ MODEL 118400 (SINGLE CYLINDER) HORIZONTAL CRANKSHAFT

Note: Muffl er brackets are for optional use on high vibration applications.

Muf er Guard De ector Spark Arrester Bracket

710074

(not available)

(not available)

711241

711243

711239

insulator

INTEK™ MODELS 121400, 123400, 124400, 126400, 127400 & 128400 (SINGLE CYLINDER)
HORIZONTAL CRANKSHAFT

Muf er Guard De ector Spark Arrester Bracket

(not

available)

699231

1-3/8” Opening

(not available)

697816

697817

715861

710099

9

EXHAUST

I NTEK™ MODELS 121400 (SINGLE CYLINDER) HORIZONTAL CRANKSHAFT
(BEFORE DATE CODE 98072000)

Muf er Guard De ector Spark Arrester Bracket

692580

(not available)

393757

(not available)

INTEK™ MODELS 110600 & 126600 (SINGLE CYLINDER) VERTICAL CRANKSHAFT

Muf er Guard De ector Spark Arrester Bracket

497682

694248 Muffl er

(Used After Code Date 99030700).

Note: 692275 Muffl er (Used Before

Code Date 99030800).

691466 Muffl er Guard

(Used After Code Date 99030700).
Note: 692984 Muffl er Guard (Used

Before Code Date 99030800).

398067

697915

INTEK™ MODELS 111600 & 121600 VERTICAL CRANKSHAFT

692548

(not

available)

10

Muf er Guard De ector Spark Arrester Bracket

(not

available)

699769

695593

397931

692957

EXHAUST

INTEK™ MODELS 111600 & 121600 VERTICAL CRANKSHAFT (CONTINUED)

Muf er Guard De ector Spark Arrester Bracket

(not

available)

396548

(not

available)

692276

694248

692984

(not available)

497682

(not

available)

(not

available)

692957

NTEK™ MODELS 12A400, 12B400, 12C400 & 12D400 (SINGLE CYLINDER SNOW ENGINE)
HORIZONTAL CRANKSHAFT

Muf er Guard Adapter Spark Arrester Bracket

691665

699511

(not available)

692237

691893

699232

(not

available)

691685

695734

11

EXHAUST

MODEL 130000 HORIZONTAL & VERTICAL CRANKSHAFT (3/4” OR 19 MM NPT)

Muf er Guard De ector Spark Arrester

TUV

691681

390918S

Lo-Tone

692304

Lo-Tone

690788

(vertical shaft)

TUV

692198

690625

(model 130000 with pulsa-jet carburetor)

TUV

398161

(model 132400 with fl oat carburetor)

690367

(see Page 5)

690367

(these defl ectors

only with these

guards)

399541

494423

(shallow side out

defl ector)

12

691969

Super Lo-Tone

496892

Round Lo-Tone

490534

(model 130000 with pulsa-jet carburetor)

TUV

498257

395700

493662

(this defl ector only

with this guard)

EXHAUST

MODEL 133400 HORIZONTAL CRANKSHAFT

Muf er Guard De ector Spark Arrester Adapter

TUV

691693

691689

690812

692006

Super Lo-Tone

(691432 for Type No. 0700)

690811

VANGUARD™ MODEL 138400 HORIZONTAL CRANKSHAFT

Muf er Guard De ector Spark Arrester Bracket

710074

715487

Lo-Tone

710332

692010

715230

(Also see

Page 6)

690813

715491

692237

715287

13

EXHAUST

MODEL 185400 HORIZONTAL CRANKSHAFT

Muf er Guard De ector Spark Arrester Bracket

710074

715230

715487

Lo-Tone

MODELS 170000 & 190000 HORIZONTAL & VERTICAL CRANKSHAFT (3/4” OR 19 MM NPT)

(Also see

Page 6)

715491

715287 710332

Muf er Guard De ector Spark

(not available)

691951

Lo-Tone (remote)

(See

Page 5)

TUV

692304

Lo-Tone

691988

(horizontal shaft)

690858

(vertical shaft)

TUV

Adapter

Arrester

394279

399541

(not

required)

14

494221

Super Lo-Tone

494868

(horizontal shaft)

395700

(this defl ector

only with this

guard)

EXHAUST

MODEL 190000 HORIZONTAL CRANKSHAFT (3/4” OR 19 MM NPT)

Muf er Guard De ector Spark Arrester Adapter

TUV

395700

(this defl ec-

497141

Super Lo-Tone 691447

tor only with

these guards)

399541

497140

498984S

Super Lo-Tone

TUV

494500

Super Lo-Tone Kit

(horizontal shaft – includes special RAF reduced after fi re

muffl er, guard and all mounting hardware – this 393761

defl ector only with this guard)

15

EXHAUST

INTEK™ MODELS 20A400, 20B400, 20C400, 20D400, 20E400, 20F400 & 20G400
HORIZONTAL CRANKSHAFT

Muf er Guard De ector Spark Arrester

696706

695386

698160

(not available)

698134

698135

699222

(not available)

INTEK™ MODELS 201400, 202400, 203400, 204400, 205400, 206400 & 207400 (SINGLE
CYLINDER) HORIZONTAL CRANKSHAFT; ALL AFTER DATE CODE 020120XX

Muf er Guard De ector Spark Arrester

697252

695386

393761

INTEK™ MODELS 201400, 202400, 203400, 204400, 205400, 206400 & 207400 (SINGLE
CYLINDER) HORIZONTAL CRANKSHAFT; ALL BEFORE DATE CODE 020121

Muf er Guard De ector Spark Arrester

695311

695386

393761 392390

16

392390

EXHAUST

MODELS 21A400 & 210400 HOIZONTAL CRANKSHAFT

Muf er Guard De ector Spark Arrester Backet

696706

695386

698160

697252

695311

698135

(not available)

393761

695386

MODELS 21A800, 21A900, 21B900, 212700 AND 212900 VERTICAL CRANKSHAFT

Muf er Guard De ector Spark Arrester Bracket

697048

(not available)

698941

697349

498984

(not available)

(not available)

697346

393761

(not available)

17

EXHAUST

MODELS 220000 & 250000 HORIZONTAL & VERTICAL CRANKSHAFT (1” OR 25 MM NPT)

Muf er Guard De ector Spark Arrester Adapter

TUV

692361

(vertical shaft)

(not required)

691874

Square Lo-Tone

497470

Super Lo-Tone

391569S

Standard (8” Length)

TUV

TUV

691404

393761

(this defl ec-

tor only with

these guards)

690648

(horizontal shaft)

497469

392390

(see Page 5)

497965

(not available)

392700

18

498984S

Super Lo-Tone

TUV

494501

Super Lo-Tone Kit

(horizontal shaft – includes special RAF reduced after fi re muffl er, guard and all mounting

hardware – this 393761 defl ector only with this guard)

EXHAUST

MODELS 230000, 240000 & 320000 (CAST IRON) HORIZONTAL CRANKSHAFT (1” OR 25 MM NPT)

Muf er Guard De ector Spark

399635

Square Lo-Tone (remote)

299477S

Standard (7” Length)

(not available)

Adapter

Arrester

394584

(See Page 5)

392390

392700

393232S

Standard (11” Length)

VANGUARD™ MODELS 235400 & 245400 HORIZONTAL CRANKSHAFT

Muf er Guard De ector Spark Arrester Bracket

710074

(not available)

715894

Lo-Tone

710586

392390

715422

19

EXHAUST

MODEL 280000 L-HEAD VERTICAL CRANKSHAFT (1” OR 25 MM NPT)

Muf er Guard De ector Spark

TUV

393761

691874

Square Lo-Tone

690850

Super Lo-Tone

692361

(includes defl ector)

(not available)

(this defl ector

only with this

guard)

(See

Page 5)

Bracket

Arrester

(not

required)

392390

698941

496750

(not

available)

20

391569S

Standard (8” Length)

496022S

Super Lo-Tone

495805S

495882

Super Lo-Tone

(not

available)

(not

available)

392700

698941

697346

EXHAUST

MODELS 28AH00, 28CH00 & 31G700 OHV VERTICAL CRANKSHAFT

Muf er Guard Muf er Bracket De ector Spark Arrester Adapter

(not available)

696706

(not available)

MODEL 28N700 OHV VERTICAL CRANKSHAFT

Muf er Guard Muf er Bracket De ector Spark Arrester Adapter

(not available)

498984S

(not available)

(not available)

(not available)

393761

393761

(not available)

697346

(not available)

392390

496022S

495882

495805S

(not available)

(not available)

(not available)

(not available)

393761

(not available)

(not available)

392390

(not available)

(not available)

697346

697346

697346

21

EXHAUST

MODELS 28P700, 28Q700, 311700 & 312700 OHV VERTICAL CRANKSHAFT (1” OR 25 MM NPT)

Muf er Guard Muf er Bracket De ector Spark Arrester Adapter

691204

691676

690850

Super Lo-Tone

690853

(not available)

690297

691678

691205

698941

(see Page 5)

392390

496750

22

496022S

(not available)

(not available)

(see Page 5)

698941

(not available)

697346

EXHAUST

VANGUARD™ MODELS 290000, 300000 & 350000 HORIZONTAL CRANKSHAFT

Muf er Guard & Heat Shield De ector Spark Arrester

808085

spacers for

tankless engines

690906

(cyl #1 side outlet,
starter motor side)

TUV

691514

691562

(cyl #2 side outlet,

oil fi lter side)

691571

(not available)

692067

495518

808361

(not available)

690931

(cyl #1 side outlet,
starter motor side)

808393

23

VANGUARD™ MODELS 290000, 300000 & 350000 HORIZONTAL CRANKSHAFT

Muf er Manifold Muf er Bracket Spark Arrester

692067

690898

Defl ector

(see Page 5)

692099

690898

692539

692056

842801

(do not use on models 351400 or

351700)

690898

691499*

(starter motor side – cannot be

installed on engine equipped with

starter motor because of interference)

692061*

(oil fi lter side – if oil fi lter

interferes, install 808033 oil

fi lter adapter kit)

691499*

(starter motor side – cannot be

installed on engine equipped with

starter motor because of interference)

690943

690944

692056

690756

692067

692056

691513

(oil fi lter side)

392390

(integral to muffl er)

692056

807742

(do not use on models 351400 or

351700)

(oil fi lter side – if oil fi lter

interferes, install 808033 oil

692061*

fi lter adapter kit)

691501*

(oil fi lter

side exit)

OEM supplied

(not available)

691502*

(starter

side exit)

*Note: Manifolds on this page require (2) 691613 gaskets and (4) 691902 mounting screws. No guards are available.

24

EXHAUST

VANGUARD™ MODELS 290000, 300000 & 350000 HORIZONTAL & VERTICAL CRANKSHAFT

Muffl er Kits Defl ector Spark Arrester

807969

807953

Super Lo-Tone

(vertical shaft – oil fi lter side only)

Super Lo-Tone Kit

(See Page 5)

392390

498984S

Super Lo-Tone

807752

Super Lo-Tone Kit

(horizontal and vertical shaft – oil fi lter side only)

Note: Manifolds on this page require (2) 691613 gaskets and (4) 691902 mounting screws.

VANGUARD™ MODELS 380000 VERTICAL & HORIZONTAL CRANKSHAFT

Muffl er Kits

(horizontal and vertical shaft

808738

Super Lo-Tone Kit

– oil fi lter side only)

25

EXHAUST

VANGUARD™ MODELS 380400 & 381400 HORIZONTAL CRANKSHAFT

Muf er Guard De ector Spark

806425

(starter motor side exit)

806425

806425

808896

(oil fi lter side exit)

(center outlet exit)

808705

808911

691902

691902

691902

(not available)

(not available)

(not available)

(not

available)

(not

available)

(not

available)

Arrester

(not

available)

(not

available)

(not

available)

Bracket

(Integral to

muffl er)

(Integral to

muffl er)

(Integral to

muffl er)

Muf er Manifold De ector Spark

OEM supplied

available)

808909

(starter motor side exit)

OEM supplied

available)

808908

(oil fi lter side exit)

VANGUARD™ MODELS 380700 & 381700 VERTICAL CRANKSHAFT

Muf er Manifold De ector Spark

available)

(not

(not

(not

Arrester

(not

available)

(not

available)

Arrester

(not

available)

Bracket

(not

available)

(not

available)

Bracket

(not

available)

26

498984S

808916

EXHAUST

MODELS 400000 & 420000 VERTICAL & HORIZONTAL CRANKSHAFT (3/4” OR 19 MM NPT)

Muf er Guard De ector Spark

399635

Square Lo-Tone (remote)

491307S

(horizontal shaft)

491319S

(vertical shaft)

690838

(vertical shaft – ducted)

(not available)

Adapter

Arrester

691975

(#1 cyl.)

691365

(#2 cyl.)

(see

Page 5)

392390

691970

(2 required)

Super Lo-Tones

INTEK™ MODELS 405700, 406700 & 407700 VERTICAL CRANKSHAFT

Muf er Guard De ector Spark

(not available)

692120

(not

available)

INTEK™ MODELS 445700 & 446700 VERTICAL CRANKSHAFT

Muf er Guard De ector Spark

(not available)

696226

(not

available)

Arrester

(not

available)

Arrester

(not

available)

Bracket

(Integral to

muffl er)

Bracket

(not

available)

27

EXHAUST

VANGUARD™ MODEL 540000 LOW MOUNT MUFFLER

Muf er Manifold Guard

841680

oil fi lter side

842262

starter motor side

VANGUARD™ MODEL 543400

Muf er Manifold Guard

809983

High mount muffl er,

oil fi lter side outlet

842263

692067

Screws (2)

841681

841682

841530

High mount muffl er,

center outlet

28

841132

841518

4”

FUEL

FUEL TANKS FOR REMOTE MOUNTING

Fuel Tank Fuel Tank Mounting Straps
Capacity and Cap (2 Required)

4 qt. (3.8 L) 290816 (metal) 291367
or 691993 (plastic)
6 qt. (5.7 L) 291488 (metal) 691937
(H 6.2”, W 5.45”, L 10.75”)
8 qt. (7.5 L) 292415 (metal) 691937
(H 6.2”, W 5.45”, L 14.37”)
Note: See fuel shutoff valves/clamps and connectors

below.

FUEL SHUT-OFF VALVES

Ref. No. Part No. Description

1 692302 Fuel tank outlet/shut-off

1

3

4

6

2

5

7

8

9

valve
2 492649 Fuel shut-off valve
3 690612 Fuel  lter/shut-off valve
assembly for metal tank
4 698183 In-line fuel shut-off valve
5 698182 MAX engine fuel shut-off

valve
6 698181 Quantum® Power engine
fuel shut-off valve
7 692008 Fuel shut-off valve for

V-Twin engines with
9-quart fuel tanks

8 698180 Fuel shut-off valve used
on select Intek™ models

9 715027 Fuel shut-off valve for 4,

5.5 & 9 HP Vanguard™
engines

IN-LINE FUEL FILTERS

Ref. No. Part No. Description

1 298090S 150 micron (red) – for
gravity feed fuel systems

1

3

2

5

4

6

2 394358S 75 micron (white) – for
engines with fuel pumps

3 691035 40 micron – for engines
with fuel pumps

4 808116S 40 micron – for V-Twin
engines with 9-quart fuel
tanks

5 694485 75 micron – fuel  lter for
engines with fuel pumps

6 695666 30 micron  lter–premium
fuel  lter for selected
engines with fuel pump

29

FUEL

FUEL LINE

23” (1/2” OD x 1/4” ID) cut to  t

Part No.

296004

FUEL LINE DISPLAY PACK

Bulk 25’ (1/2” OD x 1/4” ID) cut
to  t 499742 Re ll for display
pack (25’)

Part No.

395051

FUEL LINE

3.5 & 5 HP Industrial Plus™
(molded)

Part No.

495218

TYGON™ BULK FUEL LINE

Part No.

695540 Fuel line 3/32” ID, 50 ft.
695541 Fuel line 1/8” ID, 50 ft.
695542 Fuel line .080” ID, 50 ft.

FUEL LINE CLAMPS

Part No.

691038 Black ID .460”
95162S Green ID .490”

FUEL LINE CLAMP

Use with 715125 Vanguard™
fuel line

ID 13.2 MM

Part No.

710067

FUEL LINE

Part No. Description

715125 4, 6, 7.5 & 9 HP
Vanguard™ (tank to
shut-off valve) 8mm
OD x 470 mm (18-1/2”)
cut to  t

691050 6 & 7.5 HP Vanguard™
(carburetor to  lter)

FUEL LINE

4, 6, 7.5 HP Vanguard™ (shut-off
valve to carburetor) 4 mm OD x
220 mm (8-5/8”) cut to  t

Part No.

715126
715730 - 9 HP Vanguard™

FUEL LINE CLAMP

Used with 715126 Vanguard™
fuel line

ID 10.5 MM

Part No.

710075

FUEL STRAINERS

Fuel strainers for the following
horizontal crankshaft engines:

Part No. Models

710065 85400, 115400 &
18540

691370 190000, 235400,
245400 & V-Twin
engines with
9-quart fuel tanks

30

FUEL

FUEL STABILIZER

Merchandiser display
36 – 1 oz. pouches/box (one pouch
treats 2-1/2 gal.) Keeps fuel fresh
for up to 24 months. Promotes
quick starts.

Order 4127 box of 50 as re ll.

Part No.

100031

FUEL STABILIZER PLUS

Fuel Stabilizer Plus counter
display – 6 bottles.

Part No.

100002A

FRESH START™ CAP –
QUANTUM® ENGINES

1 cap and 2 cartridges.
Case Pack 8

Part No.

5096D
699798 - Cap only

FUEL STABILIZER PLUS

4.2 oz. – Treats 10 gallons of
gasoline.

Part No.

100002

FUEL STABILIZER PLUS

32 oz. for shop use – treats 96
gallons of gasoline.

Part No.

100006

FRESH START™
REPLACEMENT
CARTRIDGES

2 Replacement cartridges. Use
with 5096D Fresh Start™ Cap.

Part No. Description

5097D Blister Pack
Case Pack 8
699998 2 cartridges not in

blister
4222 case of 10

699998

1-1/4 GALLON FUEL CAN

Made of durable plastic. Holds
up to 1-1/4 gallons of fuel.
Spill-resistant nozzle shuts off
automatically when tank is full.

Part No.

WCA-125
WCA-125P**

2-1/2 GALLON FUEL CAN

Made of durable plastic. Holds
up to 2-1/2 gallons of fuel.
Spill-resistant nozzle shuts off
automatically when tank is full.

Part No.

WCA-225
WCA-225P**

2-COMPARTMENT 1-1/2
GALLON GAS & 2-1/2
QUART OIL, FUEL CAN

Two cans in one, keep oil on one
side, gas on the other side. Made
of durable plastic.

Part No.

WCA-150P*

JERRY CAN W/SPOUT –
5 GALLON

5 gallon steel fuel can. Leak proof
closure, internally treated lining to
prevent rust formation.

Part No.

WM521*

31

FUEL

5 GALLON FUEL CAN

Made of durable plastic. Holds up
to 5 gallons of fuel. Spill-resistant
nozzle shuts off automatically
when tank is full.

Part No.

WCA-525
WCA-525P**

5 GALLON DIESEL FUEL
CAN

Made of durable plastic. Holds up
to 5 gallons of fuel.

Part No.

WCA-526P**

FUEL CONTAINER SUMMARY

6 GALLON FUEL CAN

Made of durable plastic. Holds up
to 6 gallons of fuel.

Part No.

W611*

5 GALLON KEROSENE
CAN

Made of durable plastic. Holds up
to 5 gallons of kerosene.

Part No.

W1002*

Model

Number

WCA-125 82012 No 1-1/4 U.S. gal. Red 17 X 10-3/4 X 25 inches

WCA-125P 82013 Yes 1-1/4 U.S. gal. Red 17 X 10-3/4 X 25 inches

WCA-225 82022 No 2-1/2 U.S. gal. Red 21 X 12-1/2 X 2-21/2 inches

WCA-225P 82023 Yes 2-1/2 U.S. gal. Red 21 X 12-1/2 X 22-1/2 inches

WCA-525 82052 No 5 U.S. gal. Red 19-3/4 X 15 X 28-3/4 inches

WCA-525P 82053 Yes 5 U.S. gal. Red 19-3/4 X 15 X 28-3/4 inches

WCA-526P 82056 Yes 5 U.S. gal. Yellow 19-3/4 X 15 X 28-3/4 inches

*Ordering information: Contact your Briggs & Stratton Central Sales and Service Distributor.
**The P suf x indicates that these containers have received a special surface treatment to signi cantly reduce pollution
associated with gasoline loss by permeation. This technology combined with the auto-shut-off spout allows this line of
container to meet the California Air Resource Board (CARB) regulations for Spill Proof Systems. (Title 13, California
Code of Regulations, Chapter 9 Off-Road Vehicles and Engine Pollution Control Devices, Section 2467.2a)

UPC

Meets
CARB

Capacity Color

Case Dimensions

Length x Width x Height

Weight (lbs.

Pack size

9.90

8/case

9.90

8/case

7.9

6/case

7.9

6/case

11.4

4/case

11.4

4/case

11.4

4/case

Cube

(Cu. ft.)

2.64

2.64

3.42

3.42

4.93

4.93

4.93

32

LUBRICATION

MARINE OUTBOARD OIL

The 24 oz. bottle of oil meets
Briggs & Stratton’s strict lubrication
requirements for a SAE 30 weight
oil and is the exact amount needed
to service the Briggs & Stratton 5
hp outboard motor.

Part No.

100084

MOTOR OIL 4 CYCLE

18 oz. – High quality SAE 30,
SJ, SH, CF, detergent oil

– Specially formulated for higher
operating temperatures of air­cooled engines.

Part No.

100005

MOTOR OIL 4 CYCLE

48 oz. – High quality SAE 30,
SJ, SH, CF, detergent oil

– Specially formulated for higher
operating temperatures of air­cooled engines.

Part No.

100028

SNOW BLOWER OIL

32 oz. – High quality SAE 5W-30
detergent oil – Specially

formulated for winter use of
air-cooled engines.

Part No.

100030C

SYNTHETIC OIL

32 oz. – High quality 100%
synthetic motor oil.
SAE 5W-30

Part No.

100074

GEAR LUBE

For 5 hp outboard engines

Part No.

100090

HIGH ENDURANCE PUMP
OIL

15  . oz. (444 ml) Premium full
synthetic oil for maximum pump life
and protection.

Part No.

6033

MICRO OIL

4 cycle, 3 oz.
Used on Briggs & Stratton

Fource™ engines

Part No.

100091

33

LUBRICATION



OIL GARD® KITS

Oil Gard® automatically stops the engine if the oil level is
too low. It can be added to I/C® and Vanguard™ engines
equipped to receive it.

Kit No. Models (horizontal crankshaft)

398182 For 5 HP thru 11 HP equipped to receive
Oil Gard®

492697 For 9 HP Vanguard™
496605 For 5 HP Industrial Plus™ Model

Note: Magnetic oil drain plug recommended with Oil
Gard®

EXTENDED OIL FILL KIT

An extended oil  ll pipe (2-5/8” long) and dipstick for most
2 HP thru 8 HP horizontal crankshaft models provides
added convenience in  lling oil and checking oil level.

Kit No. Description

493955 Oil  ll pipe and dipstick

To order parts separately:

Part No. Description

691257 Oil  ll pipe
691942 Dipstick

DIPSTICKS

Ref. No. Part No. Models

1 693617 110400, 121400, 123400

1

3

2

6

4

7

5

2 692047 110600, 111600, 120600,
121600, 122600, 126600
3 496415 310700, 311700
4 499602 405600, 406700, 445700
5 697689 120400, 204400, 205400
6 693175 303400, 350400, 381400
(after 98053100)
7 699908 310000

VALVE COVER OIL FILL

Valve cover oil  lls are available for Vanguard™ V-Twin
Models 30, 35, and 38 horizontal crankshaft engines.

Part No. Description

690758 Valve cover oil  ll, if engine is not
equipped with fuel pump

690910 Valve cover oil  ll, if engine is equipped
with fuel pump

491832 Fill cap (before assembly, cut dipstick
from cap, if equipped)

34

LUBRICATION

OIL MINDERS

Gives visual indication of “safe” oil level with a touch of a
 nger.

Part No. Model

692939 Most 3 HP thru 12 HP vertical crankshaft
engines

298858 Most 2 HP thru 8 HP horizontal
crankshaft engines

298860 Most 9 HP thru 16 HP cast iron
cylinder horizontal crankshaft engines

REMOTE MOUNTING OIL FILTER KITS

For Vanguard™ V-Twin engines and Opposed Twin II™
engines equipped with full pressure lubrication.

Note: Opposed Twin II™ requires adapter kit 492675.
Vanguard™ requires adapter kit 492687.

Part No. Length of Hoses

492061 18” (48 cm)
492062 30” (76 cm)

To order parts separately:

Part No. Description

494724 (2) 18” hoses
494725 (2) 30” hoses
495244 Oil  lter kit without hoses

Oil  lter adapter kits:

Part No. Models

492675 Opposed Twin II™ engines
(includes spacer)

492687 Vanguard™ V-Twin engines

Note: Adapter has provision to receive oil pressure
switches.

OIL DRIP TRAY

Part No. Models

809334 540000 and 61000
807435 Bolts for drip tray

OIL FILTER ADAPTER

Oil  lter adapter kit re-locates oil  lter on Vanguard™
V-Twin horizontal crankshaft engines when muf er is
mounted on oil  lter side of engine (see page 24). Use
mounting hardware from original adapter.

Part No.

808033
Note: Adapter has provision to receive oil pressure switches.

35

LUBRICATION

OIL PRESSURE SWITCH

Oil pressure switches activate a warning light if oil
pressure drops to an unsafe level. Available for V-Twin
engines and Opposed Twin II™ cylinder engines equipped
with full pressure lubrication and oil  lter.

Part No. PSI

491657S 3-5 PSI
694115 9-13 PSI
690233 2 PSI

OIL DRAIN VALVE AND HOSE

Used on Vanguard™ V-Twin engines

Part No. Description

186071GS 1/4 turn oil drain
186430GS Hose

OIL DRAIN PLUGS & FITTINGS

A magnetic oil drain plug is recommended with Oil Gard®.
1/2 turn oil drain  tting makes oil changes easier.

Ref. No. Part No. Models (horizontal

12 3

4567

8

9

crankshaft)

1 691663 5 HP
2 690289 7 HP thru 11 HP
3 492030 5 HP and under

(1/4” I.D. Dia.)
4 492031 Above 5 HP

(1/2” I.D. Dia.)
5 715715 Vanguard™ single

cylinder oil drain extension
6 690946 Vanguard™ Twin
7 691686 Model 12 horizontal
8 691680 Intek™ V-Twin 1/2”

recessed square
9 807392 2-cylinder liquid-cooled

Vanguard™ 540000 &
610000

36

SNOW BLOWER EQUIPMENT

BLOCK HEATERS

Part No. Models

699312 12 (after date code 020417XX)

Part No. Models

699358 20/21

GREASE & HAND CLEANER

GREASE GUN KIT

Simple One Handed Operation
Kit includes steel grease gun,
application tube and one 3 oz.

grease cartridge.

Part No.

100057

GREASE GUN REFILL KIT

Grease Re ll Cartridges for Grease
Gun Kit 100057

Part No.

100058

MOLY/GRAPHITE GREASE

14 oz. Cartridge – Provides
maximum anti-wear protection.
Ideal for industrial, automotive, and
outdoor power equipment.

Part No.

100059

HAND CLEANER

15.2  . oz. – Powerful cleansing
agent with special conditioners and
emollients to moisturize hands as
it cleans.

Part No.

100073

HAND CLEANER

128  . oz. – Powerful cleansing
agent with special conditioners and
emollients to moisturize hands as
it cleans.

Part No.

100045

HIGH TEMPERATURE
THREAD COMPOUND AND
ANTI-SEIZE LUBRICANT

• Valve lubricant

• Eases nut and bolt assembly –
eliminates all galling, seizing and
binding on any threaded  tting
including stainless steel. Insures

fast assembly.

• Improves later disassembly –
even on manifold and exhaust bolts.

• Insures correct torque readings –
lubricates threads to eliminate
binding, seizing and drygall caused
errors. Insures true torque wrench
readings and proper seating of the

bolt.

Part No.

93963

37

LUBRICANTS & CLEANERS

HEAVY DUTY SILICONE

7.5 oz. Can – Lubricates, protects,
waterproofs, and restores a wide
range of parts and equipment.

Part No.

100069

4-USE™ LUBRICANT

11 oz. Can – Frees rusted parts,
displaces moisture, seals out rust,
and stops corrosion. Protects tools,
equipment, and all metals.

Part No.

100043

PENETRATING OIL PLUS

11 oz. Can

Part No.

100070

CARBURETOR/CHOKE
CLEANER

8 oz. Can - Quickly dissolves
carburetor deposits, reduces
downtime and improves starting.

Part No.

100041

CARBURETOR/CHOKE
CLEANER

16 oz. Can

Part No.

100042

HEAVY-DUTY
DEGREASER

15 oz. Can – Powerful, industrially
formulated cleaner. Quick removal
of oil, hydraulic  uids and related
contaminants.

Part No.

100044

BATTERY TERMINAL
PROTECTOR

7.5 oz. Can – Prolongs battery life
and assures faster, dependable
starting.

Part No.

100068

FOGGING OIL

10 oz. Can – Special formulation
for maximum internal rust
protection for all 2 & 4 cycle
engines.

Part No.

100062

38

STARTERS

12 VOLT ELECTRIC STARTER KITS**

12 volt electric starters are intended for use above -20°
F. For engines with a STEEL ring gear on  ywheel, use
394952 (illustrated) which includes a new  ywheel (inset)
and ALUMINUM ring gear, less charging magnets.

Part No. Description

394951 For use on engines with an ALUMINUM
ring gear already mounted on  ywheel
(only on engines with type nos. 0500 and
up in model series 146400, 147400,
146700* and 147700* – and all type
nos. in model series 170400, 170700,
171700* and 190000).

394953 For use on engines with an ALUMINUM
ring gear already mounted on  ywheel.

Note: Kit No. 394953 may be used on engines for all type
nos. in model series 170400, 170700*, 171700*,
190000, 220000 and 250000.
*Kits cannot be used on vertical shaft models with
2 quart fuel tank welded to blower housing.

120 VOLT ELECTRIC STARTER KITS**

120 volt electric starters are intended for use above -20° F.
For engines with a STEEL ring gear on  ywheel, use 396507
(illustrated) which includes a new  ywheel (inset)
and ALUMINUM ring gear assembly.

Part No. Description

390922 Used only on model series 130200 which
are already equipped to receive an
electric starter.

396506 For use on engines with an ALUMINUM
ring gear already mounted on  ywheel
(only on engines with type nos. 0500 and
up in model series 146400, 147400,
146700* and 147700*, – and all type nos.
in model series 170400, 170700*,
190000, 220000 and 250000).

396507 For use on engine model series shown
above except model series 220000 and
250000 includes  ywheel and
ALUMINUM ring gear assembly.

* Kits cannot be used on vertical shaft models with 2
quart fuel tank welded to blower housing.

** STARTER KITS DO NOT INCLUDE ANY SWITCHES
OR CHARGING COMPONENTS.

39

STARTERS

120 VOLT ELECTRIC STARTER KITS

120 volt electric starters are intended for use above

-20° F. For Intek™ snow engines equipped to accept
an electric starter with a ring gear already mounted on
 ywheel in model series 12B400, 12C300, 12C400,
12D300, 12D400.

Part No. Description

695660 Motor-Starter

*Kit cannot be used on vertical shaft models.

230 VOLT ELECTRIC STARTER KITS

Part No. Description

698608 Motor-Starter Model 20
699786 Motor-Starter Model 12

EUROPE ONLY - NOT FOR NORTH AMERICA

IGNITION SWITCHES

Ref. No. Part No. Description

1 298590 Toggle switch
2 692303 Pushbutton starter switch

1

4

2

5

3

6

8

7

9

10

11

12

3 496590 Toggle switch
4 691959 Indak ignition keys
(set of 2)
5 392833 Key switch for key

691959
6 692318 Key switch assembly –

used on engines equipped
with carburetor solenoid

7 697854 Rocker switch (with light)
Note: Rocker switch

without light is 698338
8 695747 Key switch used on

selected snow engines
9 695756 Key used on selected

snow engines
10 690646 Key switch
11 691959 Key set for key switch

690646
12 695951 Touch-N-Mow® Key

40

STARTERS

STARTER PANELS

Starter switch panels for 7 HP thru 16 HP models
equipped with 12 volt starter systems.

Ref. No. Part No. Description

1 395408 Pushbutton start, toggle

1

3

2

switch “ON/STOP”
2 395409 Pushbutton start, key

switch “ON/STOP”
3 394583 Pushbutton start, toggle

switch “ON/STOP”

Starter panel for Vanguard™ V-Twin horizontal crankshaft
models. Includes panel, ignition switch and key, wiring
harness, solenoid and mounting hardware.

Part No.

692096

695740

REWIND STARTER GUARDS & HANDLE

Rewind starter guards provide an added measure of
operator safety (guard “snaps” into place).

Starter Guard
Part No. Models

690601 60000 thru 110000
280680 130000
691904 170000 thru 280000

Handle
Part No. Models

695740 “Mitt” type rope grip  ts most models
including 12A400, 12B400, 12C300,

12C400, 12D300 & 12D400.

STARTER SOLENOID

Part No. Models

691656 Electric Start

Also included in starter panel, part no. 692096.

PREMIUM NYLON STARTER ROPE

Tough, durable Nylon Starter Rope. This black rope with
red tracers is stiffer than the factory original rope. This
makes it great for starter repairs because it’s easier to
feed through eyelets and pulleys. Now available in 200 ft.
and 500 ft (61m - 152m) rolls.

Part No. Description

790965 200 ft. (61m)
790969 500 ft. (152m)

41

STARTERS

ROPE GUIDE

Rope guide for extended rope on rotary lawn mowers.

Part No.

396526

SPARK PLUG SHIELD

Provides added protection against moisture and
suppresses radio interference. Fits most engine models.

Part No.

691954

DEBRIS GUARDS

Debris guards extend engine life by adding protection
against cylinder  n debris build-up. Remove rotating
screen before installing debris guard.

693514

Engine Models Debris Guard

“60000, 80000,

90000, 110000”

120000

Quantum®

130000 493945

190000 thru

280000

190000 thru

280000

280000 695448

398833

397530

398857

1

N/A 693514

(1&3)

1

2

(4&5)

“Foam Hat”

Debris Filter

271735

271735

(Covers only rotating

400000, 420000

screen area)

491349

2

271964

(Covers entire

400000, 420000

290000,

303000, 350000

1 Rewind starter models only.
2 Electric starter models without rewind starter.
3 After date code 90032600, before date code 91101300.
4 Rewind starter models only. After date code 99102600.
5 Rotating screen must be removed when using guard 695448.

blower housing)

393330

808030

2

2

805935

N/A

N/A

42

BATTERIES & BATTERY ACCESSORIES

GT-X Superior Battery

BATTERIES

• High performance, maintenance free and reliable
batteries.

• Popular sizes up to 300 CCA for garden tractors,
snowmobiles, snow blowers and other powered
equipment.

BRIGGS & STRATTON BATTERIES

BCI

Battery

Group

Size

U1 GT-X 300 34 17 18 HP engines or above

UR1 GT-R* 235 25 15 up to 18 HP engines

* Same as GT-H battery, but positive and negative terminals are reversed

Cranking

Type

GT-H 235 25 15 up to 18 HP engines

APMS

0@°F

GT 165 17 13 up to 12 HP engines

Reserve

Capacity

(mins.)@80°F

Approx.

Wt. (lbs)

Wet

Application

GT Standard Battery

GT-R Premium Battery

Ordering information:

• For replacement battery, contact your Briggs & Stratton
Authorized Service Dealer.

• OEM inquiries should be directed to Exide at
1-888-723-1881.

BATTERY CENTER DISPLAY

Part No.* Description

B7000001 Battery Terminal Protector – 1 oz.
B7000002 Battery Terminal Cleaner – 1 oz.
B1600131 Battery Terminal Anti-Corrosion Washer
B1500109 Battery Terminal Bolts
B1501012 Coated Top Post Battery Terminals
B7000150 Red & Black Terminal Caps
B7000126 Terminal Spreader
B7000151 Battery Load Tester
B7001201 1 Amp – Trickle Charger – Regulated
B7000516 Terminal Lugs
B7801226 Booster Cables 12’ – 10 gauge
B2580010 Battery Cable 19” – 6 gauge
B2580011 Battery Cable 43” – 6 gauge
B2580012 Battery Cable 49” – 6 gauge
B7062059 Mechanics Hydrometer
B7000118 Metal Brush
B1500142 Battery Cable Bolts with wingnuts
Model 1915 Battery Warmer**
Model 1916 Oil Warmer**
*Contact your Briggs & Stratton Central Sales and
Service Distributor or Authorized Service Dealer.
**For 10,000 & 12,000 kw standby only.

43

841304 841350

MISCELLANEOUS

AMMETER & HOUR METER

Part No. Description

295158 Ammeter by Stewart Warner
Scale: 20-0-20 amps
100025 Hour meter by Hobbs
Requires 12V battery
Note: Both meters include mounting hardware.

DIGITAL TACHOMETER & HOUR METER

Easy-to-use Tiny-Tach meter indicates engine RPM and
run time.

Part No.

19389

STUB SHAFT KITS

For models 400000 and 420000, horizontal shaft
opposed twin cylinder engines.

Part No.

494192
Kit includes:

Quantity Part No. Description

2 691088 Hex sem screws
1 690452 Fan retainer
1 224414 Rotating screen
1 Stub shaft*
Note: Engines built prior to code date 93011800 require

the purchase of  ywheel fan part number 498157
and fan retainer part number 690452.

For models 290000 and 380000, horizontal shaft
opposed twin cylinder engines.

Part No.

841580
Kit includes:

Quantity Part No. Description

1 Stub shaft
4 691500 Screen Spacers
1 841581 Alignment Pin
1 841582 Rotating Screen
1 690887 Hex Nut
1 494439 Rotating Screen
2 691088 Hex Head Screw
4 841441 Recess Screw
4 691647 Pan Head Screw

For model 540000, 31 HP, V-twin.

Part No.

841304
841350 Rotating screen
Stub shaft: diameter 1-1/8”, length 148mm.

44

MISCELLANEOUS

STUB SHAFT AND ALIGNMENT PIN COMBINATIONS**

STANDARD LENGTH 4.750 STUB SHAFT

STANDARD VANGUARD™ V-TWIN

Stub Shaft P/N

Model No.

Currently (old stub shaft)

2904, 2944, 3034, 3044(GF) 807867 262949 690740

3504, 3544(GF), 3804, 3814, 3844(GF) 807867 262949* none No alignment pin used because it

Replacing 262949 & 805613 when available (new stub shaft)

2904, 2944, 3034, 3044(GF) 841580 841244* 841581 This combination must be used

3504, 3544(GF), 3804, 3814, 3844(GF) 841580 841244* none No alignment pin because it will

COOLER CLEANER VANGUARD™ V-TWIN

Currently (old stub shaft)

Stub Shaft Kit

Service P/N

2954, 3054, 3094(GF) 807867

3564, 3594(G), 3854, 3864, 3894(GF) 807867 262949* 690740 Cooler cleaner  ywheel mountin

Replacing 262949 & 805613 when available (new stub shaft)

2954, 3054, 3094(GF) 841580 841244* 841581 This combination gives better

3564, 3594(GF), 3854, 3864, 3894(GF) 841580 841244* 841581 This combination gives better

(not sold

separately)

262949* 690740

Alignment

Pin P/N

Comments

will not allow stub shaft to seat on
 ywheel properly.

together. This set up insures
better alignment than the ol
stub shaft and alignment pin
listed above.

not allow stub shaft to seat on
 ywheel properly.

boss was eliminated therefore
alignment pin needed.

alignment than old set up.

alignment than old set up.

LONGER STUB SHAFT 5.439 INCHES LONG - CURRENTLY NOW AVAILABLE

(Primarily used on 35/38 cooler cleaner due to deeper blower housing)

COOLER CLEANER VANGUARD™ V-TWIN

Model No.

3564, 3594(GF), 3854, 3864, 3894(GF) 842655 809762* 841581 Longer stub shaft

*Available as kit only
**As of 8-9-05

Stub Shaft Kit

Service P/N

Stub Shaft P/N

(not sold

separately)

Alignment

Pin P/N

Comments

45

MISCELLANEOUS

FIX -A-THREAD KITS

For repairing damaged and stripped threads.

Part No. Description

100024 Thread Repair Kit Master
*100007 Thread Repair Kit 10-32
*100008 Thread Repair Kit 1/4-20
*100009 Thread Repair Kit 5/16-18
100010 Thread Repair Kit M5x..8
100011 Thread Repair Kit M6x1
100012 Thread Repair Kit M8x1.25
*100013 Thread Repair Kit 14 mm Spark Plug
*Included in 100024 Master Kit

Thread Insert Refills
Part No. Description

4185 10-32 Re ll-10
4186 1/4-20 Re ll-10
4187 5/16-18 Re ll-10
4191 14mm Spark-10, Plug-3/8”
4192 14mm Spark-10, Plug-3/4” (Vanguard™)

AEROSOL SPRAY PAINT

Fast drying, lacquer base, and gasoline resistant 13 ounce
(369g) spray can.

Available colors, order separately:

Part No. Description

271400 Gloss Black
271401 Pearl White
271402 Ice White
271403 Satin Black
271675 American Red

46

MISCELLANEOUS

MAINTENANCE MINDER™

Part No. Description

5081D The Maintenance Minder™ keeps track of
the number of hours the equipment is
being used, so that maintenance can be
performed at the proper intervals. After
maintenance is performed, simply reset
the meter. Includes a stick on label that
shows the recommended maintenance
intervals.

4210 Bulk pack (Quantity is 25 per box)

NORAM™ REDUCTION GEARBOXES

Engine Noram™ Adapter Noram™
Model No. Kit Number Gearbox Number

196400 13500024 61100 / 21100+
235400 13500015 61100 / 21100+
245400 13500015 61100 / 21100+
138400 1” dia. 12800010 61100 6-1+
138400 12800010 21100 2-1+
185400 N/A 61100 6-1+
185400 N/A 21100 2-1+
Notes: All engines must have a  ange mount side cover.
Noram output shaft size: diameter-1”, length-3”,
keyway-1/4”.
+ 1” dia. keyway crankshaft.

Contact your Briggs & Stratton Central Sales and
Service Distributor to order.

NORAM: 4360 N. Green Bay Road
Milwaukee, WI 53209
[phone]

47

MISCELLANEOUS

ADAPTER PLATE

This adapter plate allows for the repowering of model
series 130000 engines with a 5.5 HP Vanguard™.

Part No.

498861

ADAPTER SPACER KIT

For raising all Models 20 and 21 crankshaft height to the
level of Model 190000 and 250000. Adapters are 1” high
and 1-1/8” wide.

Part No.

695154

LONG LIFE PLATINUM SPARK PLUGS

For easy starts, reduces fouling.

PART NO. DESCRIPTION MODEL SERIES

5062D

4175

1 Piece

24 pcs. Shop Pack

Used on most Briggs &

Stratton L-Head engines

L-HEAD

OHV

5066D

4173

1 Piece

24 pcs. Shop Pack

Used on Intek™,
Vanguard™ and

most OHV engines

TIRE SEALANT

16 oz. & 32 oz.

Part No.

100032R – 16 oz.
100032a – 16 oz. (Tire sealant counter display –

8 bottles)
100033R – 32 oz.

OIL PUMP KIT

Part No. Description

5056D Operate by attaching to electric hand drill.

48

BRIGGS & STRATTON POWER PRODUCTS

GENERATOR ACCESSORIES

STORAGE COVER KIT ­LARGE

• Fits 15”-20” generator cradles
with wheel kit installed

• Protects your investment from
dirt, dust, etc.

• Not intended for outdoor use

Part No.

B4767GS

WHEEL KIT 15” STANDARD

• Fits most generators

• 8” solid wheels

• Lifting handle

Part No.

93580GS

WHEEL KIT 15” - DELUXE

• Fits generators with a 15” wide
cradle

• 12” pneumatic wheels

• U-shaped handle

Part No.

93581GS

WHEEL KIT 18” - DELUXE

• Fits generators with a 18” wide
cradle

• 12” pneumatic wheels

• U-shaped handle

Part No.

93583GS

WHEEL KIT 20” - DELUXE

• Fits generators with a 20” wide
cradle

• 12” pneumatic wheels

• U-shaped handle

Part No.

93584GS

5-GALLON FUEL GAUGE

• Simple  oat design

• Provides continuous indication
of fuel tank level

• Replaces the standard fuel cap
on 5-gallon plastic fuel tanks

Part No.

90878GS

4- & 7-GALLON FUEL
GAUGE

• Simple  oat design

• Provides continuous indication of
fuel tank level

• Replaces the standard fuel cap
on 7-gallon plastic fuel tanks

Part No.

B4363GS

12 VOLT BATTERY
CHARGE CABLES

Used on generators equipped
with battery charge outlet

Part No.

65787GS

49

BRIGGS & STRATTON POWER PRODUCTS

GENERATOR ACCESSORIES

WEATHERGUARD KIT

Fits Model 20 Intek™ OHV engines
installed in generator applications
only. Although designed to
improve winter weather engine
performance, it can be left installed
all year.

Part No.

698816

TRANSFER SWITCH

SYSTEMS
Part No. Description

695061 6 circuit, 5000 watt, 20 amp system
695062 10 circuit, 7500 watt, 30 amp system
695571 6 circuit, 7500 watt, 30 amp system
695511 10 circuit, 12500 watt, 30 amp system

INLET BOXES
Part No. Description

695066 20 amp inlet box
695067 30 amp inlet box
695514 50 amp inlet box

POWER CORDS
Part No. Description

695517 15’ 50 amp power cord
695518 15’ 50 amp power cord
695520 10’ 20 amp power cord
695521 10’ 30 amp power cord
695522 25’ 20 amp power cord
695523 25’ 30 amp power cord

Contact your Briggs & Stratton Central Sales and
Service Distributor to order.

50

GENERATOR ACCESSORY MATRIX

BRIGGS & STRATTON POWER PRODUCTS

PRESSURE WASHER ACCESSORIES

MULTI-PURPOSE WASH

Concentrate - 32 oz. bottle
Makes 4 gallons

Part No.

100527GS

VEHICLE/BOAT WASH

Concentrate - 32 oz. bottle
Makes 4 gallons

Part No.

100525GS

HEAVY DUTY DEGREASER

Concentrate - 32 oz. bottle
Makes 4 gallons

Part No.

100526GS

DECK WASH

Concentrate - 32 oz. bottle
Makes 2 gallons

Part No.

100524GS

KIT - FLOOR BRUSH

Part No.

100510GS

TURBO NOZZLE

• Great for heavy duty cleaning
and paint stripping

• Stainless steel wand

• Use with all pressure washers
1500-2400 psi., up to 2.2 gpm
and with M22  tting.

Part No.

100511GS

3/8” X 25’ EXTENSION
HOSE

• Rated for 4000 PSI/276 BAR

• 3/8” x 25’ size

• M22-1.5 female thread on
both ends

• Non-marking

Part No.

100513GS

3/8” X 50’ EXTENSION
HOSE

• M22-1.5 female thread

• Quick connect female  tting

• Rated at 4000 PSI

Part No.

B3636GS

ROTATING BRUSH

Part No.

89080GS

51

BRIGGS & STRATTON POWER PRODUCTS

PRESSURE WASHER ACCESSORIES

PROJECT PRO™ SPRAY
TIPS

Four replacement nozzles for
Project Pro™ Cleaning Systems

Part No.

6038

QUICK-CONNECT
TURBO WAND

Whirls a powerful pinn-point jet of
water cleaning up 40% faster than
standard nozzles

Part No.

6045

ADJUSTABLE SPRAY
NOZZLE AND WAND

Twist for a full range of spray
patterns from pin-point to wide fan
(0-40 degrees)

Part No.

6044

CLEANING SOLUTION
SIPHON HOSE & FILTER

Part No.

6046

QUICK-CONNECT WAND

Quick-Connect  tting for easy
connection to spray tips or other
accessories

Part No.

6053

MULTI-PURPOSE BRUSH
KIT

Includes rotating & utility brushes,
plus adapters to  t most gas &
electric pressure washers

Part No.

6057

STORAGE HOSE REEL

Fits 1”, 1-3/4” round & 1” square
tubing

• Up to 50’ of hose

• No tools required for assembly

• Mess-free wind-up

Part No.

6052

QUICK-CONNECT SPRAY
TIPS

Four high-pressure spray patterns
(9, 15, 25 & 40 degrees)

Part No.

6047

WATER BROOM

Spray jet provides a 14” wide spray
pattern for consistent cleaning

Part No.

6059

52

BRIGGS & STRATTON POWER PRODUCTS

PRESSURE WASHER ACCESSORIES

POWER WASHER ACCESSORY MATRIX

53

BRIGGS & STRATTON POWER PRODUCTS

PRESSURE WASHER ACCESSORIES

PUMP SAVER - 6 PACK

• Protects against freezing for
safe cold weather storage

• Maintains seals and pistons

• Prevents harmful buildup of
hard water mineral deposits
in pump

Part No.

100515GS

MULTI PURPOSE BRUSH

• Used in conjunction with your
Generac Pressure Washer

• For automobiles, patio
furniture, windows, siding and

other surfaces

Part No.

89079GS

QUICK CONNECT

• M22-1.5 female thread

• Quick connect female  tting

• Rated at 4000 PSI
Part No.
100518GS

QUICK CONNECT

• 3/8” female NPT

• Quick connect male  tting

• Rated at 4000 PSI

Part No.

B4705GS

HOSE TO HOSE ADAPTER

• 3/8” female NPT

• M22-1.5 male thread

• Rated at 4000 PSI

Part No.

95457GS

HOSE TO HOSE ADAPTER

• M22-1.5 x M22-1.5 male
thread

• Rated at 400 PSI

Part No.

B3575GS

QUICK CONNECT

• 3/8” female NPT x

• Female quick connect

• Rated at 4000 PSI

Part No.

95458GS

QUICK CONNECT

• 3/8” male NPT

• Male quick connect

• Rated at 4000 PSI

Part No.

95459GS

QUICK CONNECT

• 3/8” female NPT x

• M22-1.5 female

• Rated at 4000 PSI

Part No.

185922GS

QUICK CONNECT SET

• Combines part numbers

• 185922GS & 95458GS

• Rated at 4000 PSI

Part No.

185923GS

O-RING MAINTENANCE &
NOZZLE CLEANING KIT

• Replaces warn or damaged
o-rings

• Helps maintain nozzle
performance

Part No.

191922GS

54

3/LC ENGINE OPTIONS

ELECTRICAL CONNECTORS

Terminal
Ref. No. Part No. Connectors used on

1 825154 Oil pressure switch,

1

3

6

9

45

7

10

2

8

11

water pressure switch
2 825155 Coil-ignition wire kit
3 825156 Female fuel  lter, fuel

pump, and ignition trigger
4 825157 Male fuel pump,

alternator, ignition trigger,
fuel  lter, and fan motor

5 825158 Solenoid
6 825160 Water temperature switch

and water pump switch
7 825162 Pre-heat timer (ignition

module, male)
8 825163 Ignition module, male
9 825266 Fuel injection pump,

starter terminal
10 825288 Water temp switch
11 825289 Electronic gov. control

module 12 Pins
12 825290 Electronic gov. control

module 10 Pins
13 825322 0.8 KW starter

12

13

FAN MOTOR KIT

Electric radiator fan 120W.

Part No.

825217

FUEL FILTER

Used on gasoline engines only.

Part No.

821026

55

3/LC ENGINE OPTIONS

DIGITAL TACHOMETER AND HOURMETER

For use on Vanguard™ 3/LC liquid cooled diesel engines.

Part No.

19457

TRANSDUCER

Use with 19457 Digital Tachometer and Hourmeter. Quick
clamp design with spring loaded post terminal for easy
installation and removal.

Part No.

19463

TINY TACH ADAPTER

Adapter permits use of digital tachometer, part #19389, on
Vanguard™ 3/LC gasoline engines.

See page 44.

Part No.

19456

RESERVE TANK FOR RADIATOR

Part No.

825462

STARTER RELAY

Part No.

820455

56

Radiator Guard

Radiator

Radiator Support

3/LC ENGINE ACCESSORIES

Muf er

40 Amp Alternator

Air Cleaner Hose

Engine Mounts

Air Cleaner Bracket

Air Cleaner

3 CYLINDER VANGUARD™ LIQUID-COOLED

Service
Part No. Accessory Kit Includes

825137 Air Cleaner Paper element with cyclone
pre-cleaner, straight out,
mounting band

825125 Air Cleaner Paper element with cyclone
pre-cleaner, 90° out,
mounting band

825218 Air Cleaner Bracket Air Cleaner Mounting Bracket
825214 Engine Mounts (4) Mounting Feet for base

engine
825215 Engine Mounts Same, but for engine with

SAE bell housing (825099)
825098 Flywheel Housing Flywheel housing with SAE

Flange “A” type hydraulic pump
 ange – no coupling

825113 Flywheel Housing Flywheel housing with SAE
Flange “B” type hydraulic pump
 ange – no coupling

825099 SAE Housing & SAE  ywheel #6-1/2 & SAE
bell Flywheel housing #5
instead of end plate

825200 Muf er Exhaust muf er with guard
825358 Muf er Adapter Muf er Adapter 45°, Gasket,

Fasteners
825124 Radiator-S Kit Radiator, Fan Shroud, Surge

Tank with Bracket, Hoses
with Clamps

825103 Radiator Guard Protective Grill
820259 Radiator Screen Removable Debris Screen
825216 Radiator Mounting Kit Radiator-to-Engine Mounting

System
825072 Radiator Drain Remote Radiator Drain Kit
Valve Assembly
825123 Stub Shaft 1” Stub Shaft 1” Diameter with

3/8 keyway
825078 Stub Shaft 7/16” Stub Shaft 1-7/16”

with 3/8” keyway 1-Diameter
820554 A/C Hose 90° Bend A/C Hose 90° Bend with

2 clamps
820556 A/C Hose 180° Bend A/C Hose 180° Bend with

2 clamps
825219 Diesel Fuel Filter Fuel Filter with primer pump,

water separator and water
indicator switch

825449 Wire Harness Length: 6’
Extension
825447 Wire Harness (Diesel) Single connector hook-up,

42” wire harness extension
825448 Wire Harness (Gas) Single connector hook-up,

42” wire harness extension
825450 Control Panel (Gas) Low oil pressure, high engine

temperature, and charging
indicators
825451 Control Panel (Diesel) Low oil pressure, high engine

temperature, glow plug, fuel
 lter, and charging indicators

57

86262GS
Portable Generator
Familiarization &
Troubleshooting Guide

B3277GS
Pressure Washer
Familiarization &
Troubleshooting Guide

190275
Hand Held Generator
Familiarity & Troubleshooting
Guide

275110
5 HP Outboard

275742GS
Service & Troubleshooting
Guide, Model 1815

MS-4185
Popular Parts Source

275429
2 Cylinder Liquid-Cooled
Manual

275948GS
Service & Troubleshooting
Guide, Model 1938

MS-0750
3 cylinder L/C Gasoline
Repair Manual

6037
Outdoor Cleaning With
Pressure Washers

MS-1055
3 Cylinder L/C Diesel
Repair Manual

58

MS-5568
Engine Sales Replacement
Specifi cations

270962
Single Cylinder “L” Head
Repair Manual

271172
Twin Cylinder “L” Head
Repair Manual

CE-8069
Service manual for Out
of Production Engines
1919-1981

MS-8746
Service Tools Catalog

247041
Small Engine Care
& Repair

272147
Single Cylinder OHV
Repair Manual

CE-3048 3-Cylinder Gas and
CE-3049 Diesel Professional CDs

272144
Vanguard™ V-Twin
OHV Repair Manual

CE-3086 Computer-Based
Training Program for 10KW &
12KW Home Generator Systems

275072
Micro Engine Repair
Manual

Copyright ©2006 by Briggs & Stratton Corporation
All rights reserved. No part of this book may be reproduced or transmitted, in any form or by any means, electronic or
mechanical, including photocopying, recording or by any information storage and retrieval system, without permission
in writing from Briggs & Stratton Corporation.

Briggs & Stratton Corporation

®

TM

Corporate Office

12301 W. Wirth Street

Wauwatosa, WI 53222-2110 USA

Tel: [phone]

Dealer Locator: 1-800-223-3723

www.briggsandstratton.com

www.thepowerportal.com

WORLDWIDE SERVICE
Wherever you are, wherever you go, you can
count on quick, highly skilled, reliable service
through the Briggs & Stratton worldwide
network of more than 30,000 Authorized
Service Dealers, including more than 6,000
Master Service Technicians, dedicated to
implementing our commitment to reliability
and service. You can count on us!

MS-3880-6/06

©2006 Briggs & Stratton

BRIGGS&STRATTON

CORPORATION

Attach your dealer imprint:

P.O. BOX 702

MILWAUKEE, WI 53201-0702