Parts
Manual
IS5000Z Series
Zero-Turn Riding Mower
S/N: 1226 & Above (Tractor) 1210 & Above (Mower)
Models: Description:
5901070 31.5HP Caterpillar Diesel (S/N: 1226 & above) (IS5000Z/C31D)
5901071 31.5HP Caterpillar Diesel (S/N: 1226 & above) (IS5000Z/C31DCE)
5901074 31.5HP Caterpillar Diesel w/ 61" Mower Deck (S/N: 1226 & above) (IS5000Z/C31D61CE) 5900201 61" Rear Discharge Mower Deck (S/N: 1210 & above) (5000/61R)
5900202 61" Rear Discharge Mower Deck (S/N: 1210 & above) (5000/61RCE) 5900203 72" Mower Deck (S/N: 1210 & above) (5000/72)
5900204 72" Rear Discharge Mower Deck (S/N: 1210 & above) (5000/72R) 5900205 72" Rear Discharge Mower Deck (S/N: 1210 & above) (5000/72RCE)
Briggs and Stratton Yard Power Products Group |
|
|
5375 North Main Street |
|
|
Munnsville, NY 13409 USA |
5023460 |
|
800-933-6175 |
||
Revision 11 |
||
|
||
|
Rev. Date: 01/2007 |
|
|
TP 400-7168-11-5Z-F |
|
Table Of Contents |
MODEL COMPONENTS |
PAGE |
Main Frame & Front Suspension Group ............................................................................................................................. |
4 |
Hood, Bumper & Shield Group ........................................................................................................................................... |
6 |
Floor Pan, Brake Cover & Control Shields Group .............................................................................................................. |
8 |
Seat Compartment Group .................................................................................................................................................. |
10 |
Seat & Mount Group .......................................................................................................................................................... |
12 |
Fuel Supply Hose & Tank Replacement Parts Group ........................................................................................................ |
14 |
Fuel Tank & Mount Group .................................................................................................................................................. |
16 |
Instrument & Control Panel Group ..................................................................................................................................... |
18 |
Engine Accessories & Service Parts Group ....................................................................................................................... |
20 |
Engine & Mount Group ...................................................................................................................................................... |
. 24 |
PTO Clutch & Anchor Group .............................................................................................................................................. |
26 |
Pump Mount & Drive Group ............................................................................................................................................... |
28 |
Motion Control Group - Lower ............................................................................................................................................ |
30 |
Motion Control Group - Upper ............................................................................................................................................ |
32 |
Hydraulic Group ................................................................................................................................................................. |
36 |
Parking Brake Group - Lower ............................................................................................................................................. |
38 |
Parking Brake Group - Upper ............................................................................................................................................ |
. 40 |
Rear Suspension Group .................................................................................................................................................... |
. 42 |
Deck Lift Group .................................................................................................................................................................. |
44 |
Radiator Mount & Service Parts Group .............................................................................................................................. |
48 |
Gearbox & Mount Group .................................................................................................................................................... |
50 |
Wheels & Tires Group ........................................................................................................................................................ |
52 |
Decals - Brand & Model ..................................................................................................................................................... |
54 |
Decals - Safety & Operation - CE Models .......................................................................................................................... |
56 |
Decals - Safety & Operation - North American Models ...................................................................................................... |
58 |
Oil Cooler, Mount & Radiator Expansion Tank Group ........................................................................................................ |
60 |
61" & 72" Mower Decks - Hanger Chains ........................................................................................................................... |
62 |
61" Mower Deck - Deflector & Shield ................................................................................................................................. |
64 |
61" Mower Deck - Housing, Covers, Spindles & Blades .................................................................................................... |
66 |
61" Mower Deck - Pulleys, Belt & Idler Arm ....................................................................................................................... |
68 |
61" Mower Deck - Rollers & Casters .................................................................................................................................. |
70 |
72" Mower Deck - Deflector & Shield - Rear Discharge ..................................................................................................... |
72 |
72" Mower Deck - Housing, Covers, Spindles & Blades .................................................................................................... |
74 |
72" Mower Deck - Housing, Covers, Spindles & Blades - Rear Discharge ........................................................................ |
76 |
72" Mower Deck - Belt, Pulleys & Idler Arm ....................................................................................................................... |
78 |
72" Mower Deck - Rollers & Casters .................................................................................................................................. |
80 |
61" & 72" Mower Decks - Rear Mount Bars ....................................................................................................................... |
82 |
Electrical Schematics - (S/N: 1290 & below) ................................................................................................................... |
84-89 |
Electrical Schematics - (S/N: 1291 & above) ................................................................................................................... |
90-95 |
Torque Specification Chart ............................................................................................. |
Inside Back Cover |
Main Frame & Front Suspension Group
NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
The above parts group applies to the following Mfg. Nos.:
5901071 (S/N: 1226 & above) (IS5000Z/C3
5901070 (S/N: 1226 & above) (IS5000Z/C3
5901074 (S/N: 1226 & above) (IS5000Z/C3
© Copyright 2007 Briggs and Stratton. All Rights Reserved. |
4 |
TP 400-7168-11-5Z-F |
Main Frame & Front Suspension Group
REF NO. |
PART NO. |
QTY. |
DESCRIPTION |
1 |
5061383B |
1 |
MAIN FRAME |
2 |
5025284 |
4 |
NUT, 3/4-16 Hex Nylon Lock |
3 |
5046093 |
2 |
SPACER, .75 x 1.50 x 1.00 |
4 |
5022039 |
4 |
BALL JOINT, 3/4-16 Male |
5 |
5025265X28 |
2 |
BOLT, 3/4-16 x 3-1/2 |
6 |
5025093 |
4 |
NUT, 3/4-16 Hex Jam |
7 |
5061400 |
1 |
SUSPENSION ARM ASSEMBLY - LH, Complete (Includes Ref Nos. 8 and 9) |
8 |
5023343 |
4 |
BUSHING, Flange (Qty. (2) per suspension arm) |
9 |
5020095 |
2 |
GREASE FITTING |
10 |
5045769B |
2 |
CASTER TIRE MOUNT |
11 |
5022842 |
2 |
SHOCK & SPRING ASSEMBLY |
12 |
5025096 |
4 |
NUT, 3/8-16 Hex Nylon Lock |
13 |
5025156 |
4 |
WASHER, 3/8" SAE |
14 |
5025013X16 |
4 |
BOLT, 3/8-16 x 2 |
15 |
5022853 |
1 |
SPANNER WRENCH |
16 |
5047461 |
2 |
SPACER, .75 x 1.00 x .25 |
17 |
5025265X24 |
2 |
BOLT, 3/4-16 x 3 |
18 |
5021072 |
2 |
GREASE SEAL |
19 |
5020884 |
4 |
BEARING, Tapered Roller |
20 |
5061399 |
1 |
SUSPENSION ARM ASSEMBLY - RH, Complete (Includes Ref Nos. 8 and 9) |
21 |
5025160 |
2 |
WASHER, 3/4" SAE |
22 |
5025104 |
2 |
NUT, 3/4-16 Hex Slotted |
23 |
5021073 |
2 |
CAP |
24 |
5025203X10 |
2 |
COTTER PIN, 1/8" X 1-1/4" |
Footnotes
The above parts group applies to the following Mfg. Nos.:
5901071 (S/N: 1226 & above) (IS5000Z/C3
5901070 (S/N: 1226 & above) (IS5000Z/C3
5901074 (S/N: 1226 & above) (IS5000Z/C3
© Copyright 2007 Briggs and Stratton. All Rights Reserved. |
5 |
TP 400-7168-11-5Z-F |
Hood, Bumper & Shield Group
NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
The above parts group applies to the following Mfg. Nos.:
5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071 (S/N: 1226 & above) (IS5000Z/C3
5901070 (S/N: 1226 & above) (IS5000Z/C3
© Copyright 2007 Briggs and Stratton. All Rights Reserved. |
6 |
TP 400-7168-11-5Z-F |
Hood, Bumper & Shield Group
REF NO. |
PART NO. |
QTY. |
DESCRIPTION |
1 |
5061433B |
1 |
RADIATOR SHROUD |
2 |
5047555B |
1 |
HOOD |
3 |
5025299X6 |
6 |
SCREW, Allen Head, 1/4-20 x 3/4 |
4 |
5047552B |
1 |
REAR HOOD SUPPORT |
5 |
5025011X6 |
4 |
BOLT, 5/16-18 x 3/4 |
6 |
5025155 |
12 |
WASHER, 5/16" SAE |
7 |
5048348B |
1 |
FLYWHEEL GUARD-RH (Export models only) |
8 |
5025057 |
4 |
NUT, 5/16-18 Hex Nylon Lock |
9 |
5045784B |
1 |
REAR SHIELD |
10 |
5047578B |
1 |
BUMPER |
11 |
5025018X12 |
2 |
BOLT, 1/2-20 x 1-1/2 |
12 |
5047581B |
1 |
SKID SHIELD |
13 |
5025098 |
2 |
NUT, 1/2-20 Hex Nylon Lock |
14 |
5025013X20 |
2 |
BOLT, 3/8-16 x 2-1/2 |
15 |
5025156 |
8 |
WASHER, 3/8" SAE |
16 |
5044992 |
2 |
SPACER, .38 x .50 x 1.56 |
17 |
5025305 |
2 |
WASHER, 3/8 x 1-3/4 |
18 |
5025096 |
2 |
NUT, 3/8-16 Hex Nylon Lock |
19 |
5025013X10 |
4 |
BOLT, 3/8-16 x 1-1/4 |
20 |
5025011X8 |
8 |
BOLT, 5/16-18 x 1 |
21 |
5022308 |
4 |
BODY CLIP, 5/16-18 |
22 |
5025127 |
4 |
NUT, 5/16-18 Hex Small Serrated Flange |
23 |
5025013X8 |
10 |
BOLT, 3/8-16 x 1 |
24 |
5025128 |
12 |
NUT, 3/8-16 Hex Serrated Flange |
25 |
5047545B |
1 |
DEBRIS SHIELD |
26 |
5048349B |
1 |
FLYWHEEL GUARD-LH (Export models only) |
27 |
5047587B |
2 |
SUPPORT PLATE |
28 |
5021029 |
2 |
TIE WRAP, 11" |
29 |
5025391 |
6 |
NUT, 1/4-20 Hex Nylock Flange |
30 |
5048627B |
1 |
MOUNT, Water Separator |
31 |
5025010X6 |
4 |
BOLT, 1/4-20 x 3/4 |
32 |
5025154 |
4 |
WASHER, 1/4" SAE |
33 |
5022665 |
4 |
BODY CLIP, 1/4-20 |
34 |
5048557B |
2 |
SIDE BAFFLE |
35 |
5021030 |
2 |
TIE WRAP, 5-1/2" |
36 |
5021077 |
2 |
GROMMET, 1/2" |
37 |
5050926X17 |
3 |
WIPER SEAL, 17" |
38 |
5050926X3 |
1 |
WIPER SEAL, 3" |
Footnotes
The above parts group applies to the following Mfg. Nos.:
5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071 (S/N: 1226 & above) (IS5000Z/C3
5901070 (S/N: 1226 & above) (IS5000Z/C3
© Copyright 2007 Briggs and Stratton. All Rights Reserved. |
7 |
TP 400-7168-11-5Z-F |
Floor Pan, Brake Cover & Control Shields Group
NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
The above parts group applies to the following Mfg. Nos.:
5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071 (S/N: 1226 & above) (IS5000Z/C3
5901070 (S/N: 1226 & above) (IS5000Z/C3
© Copyright 2007 Briggs and Stratton. All Rights Reserved. |
8 |
TP 400-7168-11-5Z-F |
Floor Pan, Brake Cover & Control Shields Group
REF NO. |
PART NO. |
QTY. |
DESCRIPTION |
1 |
5025013X8 |
8 |
BOLT, 3/8-16 x 1 |
2 |
5025156 |
8 |
WASHER, 3/8" SAE |
3 |
5047548B |
1 |
SHIELD - RH |
4 |
5025128 |
8 |
NUT, 3/8-16 Hex Serrated Flange |
5 |
5047549B |
1 |
SHIELD - LH |
6 |
5022308 |
2 |
BODY CLIP, 5/16-18 |
7 |
5025340 |
2 |
SHOULDER BOLT, 3/8 x 5/8 |
8 |
5041600 |
2 |
SLEEVE |
9 |
5022816 |
2 |
GROMMET |
10 |
5025057 |
2 |
NUT, 5/16-18 Hex Nylon Lock |
11 |
5045915 |
2 |
SAFETY WALK |
12 |
5045333B |
1 |
FLOOR PAN |
13 |
5044873 |
1 |
SAFETY WALK |
14 |
5021877 |
2 |
RUBBER PAD |
15 |
5025011X6 |
2 |
BOLT, 5/16-18 x 3/4 |
16 |
5025155 |
2 |
WASHER, 5/16" SAE |
17 |
5047285B |
1 |
HOLD DOWN (Export models only) |
18 |
61547 |
1 |
BRAKE COVER PANEL ASSEMBLY (Includes decal) |
19 |
61548 |
1 |
BRAKE COVER PANEL ASSEMBLY, Export Model (Includes decal) |
Footnotes
The above parts group applies to the following Mfg. Nos.:
5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071 (S/N: 1226 & above) (IS5000Z/C3
5901070 (S/N: 1226 & above) (IS5000Z/C3
© Copyright 2007 Briggs and Stratton. All Rights Reserved. |
9 |
TP 400-7168-11-5Z-F |
Seat Compartment Group
NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
The above parts group applies to the following Mfg. Nos.:
5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071 (S/N: 1226 & above) (IS5000Z/C3
5901070 (S/N: 1226 & above) (IS5000Z/C3
© Copyright 2007 Briggs and Stratton. All Rights Reserved. |
10 |
TP 400-7168-11-5Z-F |
Seat Compartment Group
REF NO. |
PART NO. |
QTY. |
DESCRIPTION |
1 |
5022596 |
2 |
BATTERY HOLDDOWN BOLT |
2 |
5022595 |
1 |
BATTERY HOLDDOWN |
3 |
- |
1 |
BATTERY, 12V (BCI58, 500 CCA) |
4 |
5025010X6 |
4 |
BOLT, 1/4-20 x 3/4 |
5 |
5025169 |
2 |
WASHER, 1/4" Lock |
6 |
5025154 |
2 |
WASHER, 1/4" SAE |
7 |
5047635B |
1 |
OIL FILTER MOUNT |
8 |
5025011X6 |
4 |
BOLT, 5/16-18 x 3/4 |
9 |
5025155 |
4 |
WASHER, 5/16" SAE |
10 |
5025127 |
4 |
NUT, 5/16-18 Hex Small Serrated Flange |
11 |
5046061B |
2 |
HOLD DOWN PLATE |
12 |
5025013X18 |
4 |
BOLT, 3/8-16 x 2-1/4 |
13 |
5025156 |
4 |
WASHER, 3/8" SAE |
14 |
5025096 |
4 |
NUT, 3/8-16 Hex Nylon Lock |
15 |
5025126 |
2 |
NUT, 1/4-20 Hex Serrated Flange |
16 |
5022594 |
1 |
ALARM |
17 |
5021397 |
3 |
GROMMET, 1-1/4" |
Footnotes
The above parts group applies to the following Mfg. Nos.:
5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071 (S/N: 1226 & above) (IS5000Z/C3
5901070 (S/N: 1226 & above) (IS5000Z/C3
© Copyright 2007 Briggs and Stratton. All Rights Reserved. |
11 |
TP 400-7168-11-5Z-F |
Seat & Mount Group
NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
The above parts group applies to the following Mfg. Nos.:
5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071 (S/N: 1226 & above) (IS5000Z/C3
5901070 (S/N: 1226 & above) (IS5000Z/C3
© Copyright 2007 Briggs and Stratton. All Rights Reserved. |
12 |
TP 400-7168-11-5Z-F |
Seat & Mount Group
REF NO. |
PART NO. |
QTY. |
DESCRIPTION |
1 |
5022955 |
1 |
SEAT, Deluxe, Gray, Complete (Includes Ref No. 2 - 6) |
2 |
5022955X1 |
1 |
CUSHION, Bottom Cover |
3 |
5022955X2 |
1 |
CUSHION, Back Cover |
4 |
5022955X3 |
2 |
ARM REST SET (Includes Ref No. 5) |
5 |
5022955X4 |
2 |
ARM REST PADS |
6 |
5020930X3 |
1 |
SEAT ADJUSTER RAILS (set of 2) |
7 |
5047744B |
1 |
SEAT MOUNT |
8 |
5046470 |
1 |
SEAT STOP ROD |
9 |
5020047 |
1 |
COLLAR, 5/16" Set |
10 |
5025013X32 |
2 |
BOLT, 3/8-16 x 4 |
11 |
5025057 |
6 |
NUT, 5/16-18 Hex Nylon Lock |
12 |
5025096 |
3 |
NUT, 3/8-16 Hex Nylon Lock |
13 |
5025013X48 |
1 |
BOLT, 3/8-16 x 6 |
14 |
5025156 |
1 |
WASHER, 3/8" SAE |
15 |
5046586 |
1 |
SPACER, .38 X .50 X 5.06 |
16 |
5022798 |
1 |
SPRING, Compression |
17 |
5025326 |
1 |
WASHER, 3/8 x 2 |
18 |
5022094 |
1 |
SWITCH, Plunger, NO/NC |
19 |
5025270 |
2 |
SCREW, #10-24 x 1 |
20 |
25029 |
2 |
NUT, #10-24 Hex |
21 |
5022612 |
2 |
RUBBER BUMPER |
22 |
5100652 |
1 |
SPRING, EXTENSION, 4" SEAT ADJUSTMENT (Not shown.) |
Footnotes
The above parts group applies to the following Mfg. Nos.:
5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071 (S/N: 1226 & above) (IS5000Z/C3
5901070 (S/N: 1226 & above) (IS5000Z/C3
© Copyright 2007 Briggs and Stratton. All Rights Reserved. |
13 |
TP 400-7168-11-5Z-F |
Fuel Supply Hose & Tank Replacement Parts Group
NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
The above parts group applies to the following Mfg. Nos.:
5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071 (S/N: 1226 & above) (IS5000Z/C3
5901070 (S/N: 1226 & above) (IS5000Z/C3
© Copyright 2007 Briggs and Stratton. All Rights Reserved. |
14 |
TP 400-7168-11-5Z-F |
Fuel Supply Hose & Tank Replacement Parts Group
REF NO. |
PART NO. |
QTY. |
DESCRIPTION |
1 |
5023060 |
2 |
VALVE, Fuel Shut-Off |
2 |
1726400 |
5 |
GROMMET |
3 |
5022922 |
9 |
CLAMP, #4 Hose |
4 |
5050919X36 |
2 |
HOSE, 36" |
5 |
5022920 |
1 |
FITTING, TEE, 3/8" Hose |
6 |
5050919X34 |
1 |
HOSE, 34" |
7 |
5050831X20 |
2 |
1/4" Fuel Line, 20" Long |
8 |
5020835 |
3 |
CLAMP, Hose |
9 |
1674231 |
2 |
ELBOW FITTING |
10 |
5023061 |
1 |
ELBOW FITTING |
11 |
5022708 |
2 |
FITTING, 1/4" NPT, 90 Deg. |
12 |
5022926 |
1 |
FILTER/WATER SEPARATOR ASSEMBLY, Complete (Includes Ref No. 13 - 15) |
13 |
5022926X1 |
1 |
FUEL FILTER |
14 |
5022926X2 |
1 |
O-RING SEAL |
15 |
5022926X3 |
1 |
BOWL |
16 |
5050831X48 |
1 |
1/4" Fuel Line, 48" Long |
17 |
5025013X12 |
2 |
BOLT, 3/8-16 x 1-1/2 |
18 |
5025156 |
2 |
WASHER, 3/8" SAE |
19 |
5025096 |
2 |
NUT, 3/8-16 Hex Nylon Lock |
20 |
50919-63 |
1 |
HOSE, 63" |
21 |
5023069 |
2 |
HOSE CLAMP |
22 |
5050925X26 |
1 |
HOSE, 26" |
23 |
5023068 |
1 |
CONNECTOR FITTING |
Footnotes
The above parts group applies to the following Mfg. Nos.:
5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071 (S/N: 1226 & above) (IS5000Z/C3
5901070 (S/N: 1226 & above) (IS5000Z/C3
© Copyright 2007 Briggs and Stratton. All Rights Reserved. |
15 |
TP 400-7168-11-5Z-F |
Fuel Tank & Mount Group
NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
The above parts group applies to the following Mfg. Nos.:
5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071 (S/N: 1226 & above) (IS5000Z/C3
5901070 (S/N: 1226 & above) (IS5000Z/C3
© Copyright 2007 Briggs and Stratton. All Rights Reserved. |
16 |
TP 400-7168-11-5Z-F |
Fuel Tank & Mount Group
REF NO. |
PART NO. |
QTY. |
DESCRIPTION |
1 |
5049120 |
1 |
FUEL TANK, IS5000Z, LH |
2 |
5049121 |
1 |
FUEL TANK, IS5000Z, RH |
3 |
5022915 |
2 |
FUEL TANK CAP, DIESEL (Yellow center, non-vented) |
4 |
5025139 |
8 |
NUT, 5/16-18 Hex Large Serrated Flange |
5 |
5025155 |
20 |
WASHER, 5/16" SAE |
6 |
5025011X8 |
8 |
BOLT, 5/16-18 x 1 |
7 |
5048527B |
2 |
FUEL TANK MOUNT |
8 |
5025011X6 |
12 |
BOLT, 5/16-18 x 3/4 |
9 |
5025170 |
12 |
WASHER, 5/16" Lock |
10 |
5047993B |
2 |
GUARD, Tank Valve |
Footnotes
The above parts group applies to the following Mfg. Nos.:
5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071 (S/N: 1226 & above) (IS5000Z/C3
5901070 (S/N: 1226 & above) (IS5000Z/C3
© Copyright 2007 Briggs and Stratton. All Rights Reserved. |
17 |
TP 400-7168-11-5Z-F |
Instrument & Control Panel Group
NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
The above parts group applies to the following Mfg. Nos.:
5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071 (S/N: 1226 & above) (IS5000Z/C3
5901070 (S/N: 1226 & above) (IS5000Z/C3
© Copyright 2007 Briggs and Stratton. All Rights Reserved. |
18 |
TP 400-7168-11-5Z-F |
Instrument & Control Panel Group
REF NO. |
PART NO. |
QTY. |
DESCRIPTION |
1 |
5049178A |
1 |
CONTROL PANEL-RH |
2 |
25179-6 |
2 |
SCREW, #10-24 x 3/4 |
3 |
5022883X4 |
1 |
INDICATOR, Glow Plug |
4 |
5022180 |
1 |
SWITCH, PTO |
5 |
5022883X1 |
1 |
SWITCH, Ignition, Complete (Includes Ref No. 3 & 4) |
6 |
5022883X2 |
1 |
KEY, Ignition (Set of 2) |
7 |
5022883X3 |
1 |
COVER PLATE |
8 |
5025299X4 |
8 |
SCREW, Allen Head, 1/4-20 x 1/2 |
9 |
5048475 |
1 |
THROTTLE STOP PLATE (CE models only) |
10 |
5046392 |
1 |
CABLE, Throttle Control, 47-1/2" |
11 |
5025271 |
2 |
NUT, #10-24 Hex Nylon Lock |
12 |
5046360 |
1 |
HANDLE, Throttle Control, Complete (with knob) |
13 |
5046360X1 |
1 |
KNOB |
14 |
5022917 |
1 |
FUEL GAUGE |
15 |
5022917X1 |
1 |
GROMMET |
16 |
5049177A |
1 |
CONTROL PANEL-LH |
17 |
5023244 |
1 |
HOURMETER, Digital |
18 |
5022387 |
1 |
GAUGE, Voltmeter |
19 |
5022483 |
1 |
GAUGE, Water Temperature |
20 |
5046473 |
1 |
GAUGE, Warning, Oil/Temp |
Footnotes
The above parts group applies to the following Mfg. Nos.:
5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071 (S/N: 1226 & above) (IS5000Z/C3
5901070 (S/N: 1226 & above) (IS5000Z/C3
© Copyright 2007 Briggs and Stratton. All Rights Reserved. |
19 |
TP 400-7168-11-5Z-F |
Engine Accessories & Service Parts Group
NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
The above parts group applies to the following Mfg. Nos.:
5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071 (S/N: 1226 & above) (IS5000Z/C3
5901070 (S/N: 1226 & above) (IS5000Z/C3
© Copyright 2007 Briggs and Stratton. All Rights Reserved. |
20 |
TP 400-7168-11-5Z-F |
Engine Accessories & Service Parts Group
REF NO. |
PART NO. |
QTY. |
DESCRIPTION |
1 |
5022883X33 |
1 |
AIR INLET HOSE |
2 |
5022883X45 |
1 |
AIR CLEANER INDICATOR |
3 |
5022591 |
1 |
PRE-CLEANER |
4 |
5022883X44 |
1 |
AIR CLEANER BRACKET |
5 |
5022883X29 |
1 |
AIR CLEANER ASSEMBLY, Complete (Includes Ref No. 6 - 9) |
6 |
5022883X46 |
1 |
AIR CLEANER HOUSING ASSEMBLY |
7 |
5022883X31 |
1 |
AIR CLEANER ELEMENT |
8 |
5022883X32 |
1 |
AIR CLEANER DUST VALVE |
9 |
5022883X30 |
1 |
AIR CLEANER COVER |
10 |
5022883X7 |
1 |
OIL FILL CAP |
11 |
5022883X8 |
2 |
OIL FILL O-RING SEAL |
12 |
5022883X6 |
1 |
OIL FILL EXTENSION |
13 |
5047650 |
1 |
BARREL CLAMP |
14 |
25179-6 |
2 |
SCREW, #10-24 x 3/4 |
15 |
5025169 |
2 |
WASHER, 1/4" Lock |
16 |
5025248 |
2 |
BOLT, M6 x 10MM |
17 |
5022901 |
1 |
CLAMP |
18 |
5047392 |
1 |
THROTTLE BRACKET |
19 |
5025271 |
1 |
NUT, #10-24 Hex Nylon Lock |
20 |
5022883X11 |
1 |
OIL FILTER |
21 |
5022883X20 |
1 |
DIPSTICK |
22 |
5022883X19B |
1 |
FUEL FILTER ASSEMBLY, Complete (Includes 22883-19C) |
23 |
5022883X19C |
1 |
FILTER ELEMENT |
24 |
5047306 |
1 |
STUB SHAFT & FLYWHEEL PLATE ASSEMBLY |
25 |
5025011X10 |
8 |
BOLT, 5/16-18 x 1-1/4 |
26 |
5025170 |
12 |
WASHER, 5/16" Lock |
27 |
5025155 |
18 |
WASHER, 5/16" SAE |
28 |
5022883X21 |
1 |
OIL PAN PLUG |
29 |
5022883X22 |
1 |
WASHER, Oil Pan Plug |
30 |
5025128 |
2 |
NUT, 3/8-16 Hex Serrated Flange |
31 |
5025011X8 |
2 |
BOLT, 5/16-18 x 1 |
32 |
5048600B |
1 |
MUFFLER SUPPORT |
33 |
5025013X14 |
2 |
BOLT, 3/8-16 x 1-3/4 |
34 |
5023125 |
1 |
MUFFLER |
35 |
5023126 |
1 |
WIRE GUARD (Export models only) |
36 |
5022308 |
1 |
BODY CLIP, 5/16-18 |
37 |
5025127 |
2 |
NUT, 5/16-18 Hex Small Serrated Flange |
38 |
25237 |
4 |
BOLT, M8 x 25MM |
39 |
5022883X36 |
1 |
GASKET, Exhaust Manifold |
40 |
5022883X9 |
1 |
FUEL SOLENOID (Not an illustrated part) |
41 |
5022883X10 |
1 |
WASHER, Fuel Solenoid (Not an illustrated part) |
Footnotes
The above parts group applies to the following Mfg. Nos.:
5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071 (S/N: 1226 & above) (IS5000Z/C3
5901070 (S/N: 1226 & above) (IS5000Z/C3
© Copyright 2007 Briggs and Stratton. All Rights Reserved. |
21 |
TP 400-7168-11-5Z-F |
Engine Accessories & Service Parts Group
NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
The above parts group applies to the following Mfg. Nos.:
5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071 (S/N: 1226 & above) (IS5000Z/C3
5901070 (S/N: 1226 & above) (IS5000Z/C3
© Copyright 2007 Briggs and Stratton. All Rights Reserved. |
22 |
TP 400-7168-11-5Z-F |
Engine Accessories & Service Parts Group
REF NO. |
PART NO. |
QTY. |
DESCRIPTION |
42 |
5022883X12 |
1 |
WATER PUMP (Not an illustrated part) |
43 |
5022883X14 |
1 |
WATER HOSE-UPPER (Not an illustrated part) |
44 |
5022883X15 |
1 |
WATER HOSE-LOWER (Not an illustrated part) |
45 |
5022883X16 |
1 |
GASKET, Water Pump (Not an illustrated part) |
46 |
5022883X17 |
1 |
THERMOSTAT (Not an illustrated part) |
47 |
5022883X18 |
1 |
GASKET, Thermostat (Not an illustrated part) |
48 |
5022883X23 |
1 |
STARTER MOTOR (Not an illustrated part) |
49 |
5022883X24 |
1 |
ALTERNATOR (Not an illustrated part) |
50 |
5022883X25 |
1 |
BELT (Not an illustrated part) |
51 |
5022883X26 |
1 |
FUEL PUMP (Not an illustrated part) |
52 |
5022883X27 |
1 |
GASKET, Fuel Pump (Not an illustrated part) |
53 |
5022883X28 |
3 |
GLOW PLUG (Not an illustrated part) |
54 |
5022883X38 |
1 |
RADIATOR (Not an illustrated part) |
55 |
5022883X39 |
1 |
SWITCH, Oil Pressure (Not an illustrated part) |
56 |
5022883X40 |
1 |
SWITCH, Water Temperature (Not an illustrated part) |
57 |
5022883X41 |
1 |
STARTER SOLENOID (Not an illustrated part) |
58 |
5022883X42 |
1 |
SEAL, Rear Main (Not an illustrated part) |
59 |
5022883X43 |
1 |
SEAL, Front Main (Not an illustrated part) |
60 |
5022883X47 |
3 |
INJECTOR ASSEMBLY (Not an illustrated part) |
61 |
5022883X48 |
3 |
WASHER, 4-HOLE (Not an illustrated part) |
62 |
5022883X49 |
3 |
WASHER, SEALING (Not an illustrated part) |
63 |
5022883X50 |
3 |
WASHER, CRUSH (Not an illustrated part) |
Footnotes
The above parts group applies to the following Mfg. Nos.:
5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071 (S/N: 1226 & above) (IS5000Z/C3
5901070 (S/N: 1226 & above) (IS5000Z/C3
© Copyright 2007 Briggs and Stratton. All Rights Reserved. |
23 |
TP 400-7168-11-5Z-F |
Engine & Mount Group
NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
The above parts group applies to the following Mfg. Nos.:
5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071 (S/N: 1226 & above) (IS5000Z/C3
5901070 (S/N: 1226 & above) (IS5000Z/C3
© Copyright 2007 Briggs and Stratton. All Rights Reserved. |
24 |
TP 400-7168-11-5Z-F |
Engine & Mount Group
REF NO. |
PART NO. |
QTY. |
DESCRIPTION |
1 |
5022883 |
1 |
ENGINE, Caterpillar 31.5 HP Diesel |
2 |
5025013X20 |
2 |
BOLT, 3/8-16 x 2-1/2 |
3 |
5025156 |
5 |
WASHER, 3/8" SAE |
4 |
5047364B |
1 |
MOTOR MOUNT - RH |
5 |
25357 |
4 |
BOLT, M14 x 30MM |
6 |
5025013X8 |
4 |
BOLT, 3/8-16 x 1 |
7 |
5022896 |
2 |
ISO MOUNT, Front |
8 |
5044959 |
2 |
SPACER, .38 x .50 x 1.00 |
9 |
5025013X24 |
1 |
BOLT, 3/8-16 x 3 |
10 |
5047381 |
4 |
WASHER, 3/8 x 2-1/2 |
11 |
5022897 |
1 |
ISO MOUNT, Rear (2 piece) |
12 |
5047360B |
1 |
MOTOR MOUNT - Upper |
13 |
5025155 |
2 |
WASHER, 5/16" SAE |
14 |
5025249 |
2 |
BOLT, M8 x 20MM |
15 |
5025171 |
2 |
WASHER, 3/8" Lock |
16 |
5025333 |
2 |
BOLT, M10 x 30MM |
17 |
5047380 |
1 |
SPACER, .38 x .62 x 1.62 |
18 |
5025096 |
3 |
NUT, 3/8-16 Hex Nylon Lock |
19 |
5025128 |
4 |
NUT, 3/8-16 Hex Serrated Flange |
20 |
5047365B |
1 |
MOTOR MOUNT - LH |
Footnotes
- See your local Caterpillar engine dealer for parts & service.
The above parts group applies to the following Mfg. Nos.:
5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071 (S/N: 1226 & above) (IS5000Z/C3
5901070 (S/N: 1226 & above) (IS5000Z/C3
© Copyright 2007 Briggs and Stratton. All Rights Reserved. |
25 |
TP 400-7168-11-5Z-F |
PTO Clutch & Anchor Group
NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
The above parts group applies to the following Mfg. Nos.:
5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071 (S/N: 1226 & above) (IS5000Z/C3
5901070 (S/N: 1226 & above) (IS5000Z/C3
© Copyright 2007 Briggs and Stratton. All Rights Reserved. |
26 |
TP 400-7168-11-5Z-F |
PTO Clutch & Anchor Group
REF NO. |
PART NO. |
QTY. |
DESCRIPTION |
1 |
5025011X8 |
5 |
BOLT, 5/16-18 x 1 |
2 |
5047563B |
1 |
CLUTCH ANCHOR |
3 |
5021030 |
1 |
TIE WRAP, 5-1/2" |
4 |
5025127 |
2 |
NUT, 5/16-18 Hex Small Serrated Flange |
5 |
5025045 |
3 |
NUT, 5/16-24, Hex Nylon Lock |
6 |
5025155 |
2 |
WASHER, 5/16" SAE |
7 |
5044617 |
3 |
WASHER, Clutch Anchor |
8 |
5043636 |
1 |
CLUTCH ANCHOR PAD |
9 |
5050407X2 |
1 |
KEY, 1/4 SQ. X 3 |
10 |
5022575 |
1 |
BELT, Clutch Drive (set of 2) |
11 |
5045473 |
1 |
CRANKSHAFT BOLT, 7/16 x 1-1/2 |
12 |
5045475 |
1 |
SPACER, .45 x 1.88 x .38 |
13 |
5022884 |
1 |
PTO CLUTCH |
14 |
5025013X24 |
1 |
BOLT, 3/8-16 x 3 |
15 |
5025156 |
4 |
WASHER, 3/8" SAE |
16 |
5022797 |
1 |
PULLEY, Idler |
17 |
5025128 |
2 |
NUT, 3/8-16 Hex Serrated Flange |
18 |
1608395 |
1 |
SPRING, Extension |
19 |
5025100 |
1 |
NUT, 3/8-16 Hex Side Lock |
20 |
5046916 |
1 |
SPACER, .51 x 1.75 x .75 |
21 |
5022250 |
2 |
BUSHING, Flange |
22 |
5020095 |
1 |
GREASE FITTING |
23 |
5046565B |
1 |
CLUTCH DRIVE IDLER ARM |
24 |
5045305 |
1 |
PIVOT SLEEVE, Long |
25 |
5025158 |
1 |
WASHER, 1/2" SAE |
26 |
5025056 |
1 |
NUT, 1/2-13 Hex Nylon Lock |
27 |
5025321 |
1 |
SCREW HOOK, 3/8-16 x 4-1/4 |
28 |
5025096 |
1 |
NUT, 3/8-16 Hex Nylon Lock |
Footnotes
The above parts group applies to the following Mfg. Nos.:
5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071 (S/N: 1226 & above) (IS5000Z/C3
5901070 (S/N: 1226 & above) (IS5000Z/C3
© Copyright 2007 Briggs and Stratton. All Rights Reserved. |
27 |
TP 400-7168-11-5Z-F |
Pump Mount & Drive Group
NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
The above parts group applies to the following Mfg. Nos.:
5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071 (S/N: 1226 & above) (IS5000Z/C3
5901070 (S/N: 1226 & above) (IS5000Z/C3
© Copyright 2007 Briggs and Stratton. All Rights Reserved. |
28 |
TP 400-7168-11-5Z-F |
Pump Mount & Drive Group
REF NO. |
PART NO. |
QTY. |
DESCRIPTION |
1 |
5025098 |
4 |
NUT, 1/2-20 Hex Nylon Lock |
2 |
5044913 |
4 |
WASHER, Frame Retaining |
3 |
5047361B |
1 |
PUMP MOUNT PLATE |
4 |
5025018X14 |
4 |
BOLT, 1/2-20 x 1-3/4 |
5 |
5022382 |
2 |
PULLEY, Pump Drive |
6 |
5022383 |
2 |
HUB, Taper Lock |
7 |
5023254 |
2 |
KEY, 5MM SQ. x 25MM w/ Round Ends |
8 |
5025010X8 |
4 |
BOLT, 1/4-20 x 1 |
9 |
5022899 |
1 |
PULLEY, Pump Drive |
10 |
5050404X4 |
1 |
KEY, 5/16 SQ. X 1-1/4 |
11 |
5022314 |
1 |
BELT, Pump Drive (set of 2) |
12 |
5025017X40 |
1 |
BOLT, 1/2-13 x 5 |
13 |
5022847 |
1 |
SPRING, Extension, Swivel End |
14 |
5025158 |
1 |
WASHER, 1/2" SAE |
15 |
5050857X3P25 |
1 |
HOSE, 3-1/4 |
16 |
5025301 |
1 |
NUT, 1/2-13 Hex Jam |
17 |
5025013X36 |
1 |
BOLT, 3/8-16 x 4-1/2 |
18 |
5042142B |
1 |
SPRING ANCHOR |
19 |
5044933 |
2 |
SPACER, .39 x .75 x .38 |
20 |
5025305 |
1 |
WASHER, 3/8 x 1-3/4 |
21 |
5025100 |
1 |
NUT, 3/8-16 Hex Side Lock |
22 |
5025156 |
8 |
WASHER, 3/8" SAE |
23 |
5047199 |
1 |
SPACER, .38 x .50 x .75 |
24 |
5022373 |
1 |
PULLEY, Idler, Flat |
25 |
5022157 |
2 |
BUSHING, Brass |
26 |
5046574B |
1 |
PUMP DRIVE IDLER ARM |
27 |
5045135 |
1 |
SPACER, .39 X 1.00 X 2.55 |
28 |
5045475 |
1 |
SPACER, .45 x 1.88 x .38 |
29 |
5025013X24 |
1 |
BOLT, 3/8-16 x 3 |
30 |
5025056 |
1 |
NUT, 1/2-13 Hex Nylon Lock |
31 |
5025013X8 |
6 |
BOLT, 3/8-16 x 1 |
32 |
5025128 |
6 |
NUT, 3/8-16 Hex Serrated Flange |
33 |
5025096 |
1 |
NUT, 3/8-16 Hex Nylon Lock |
Footnotes
The above parts group applies to the following Mfg. Nos.:
5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071 (S/N: 1226 & above) (IS5000Z/C3
5901070 (S/N: 1226 & above) (IS5000Z/C3
© Copyright 2007 Briggs and Stratton. All Rights Reserved. |
29 |
TP 400-7168-11-5Z-F |
Motion Control Group - Lower
NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
The above parts group applies to the following Mfg. Nos.:
5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071 (S/N: 1226 & above) (IS5000Z/C3
5901070 (S/N: 1226 & above) (IS5000Z/C3
© Copyright 2007 Briggs and Stratton. All Rights Reserved. |
30 |
TP 400-7168-11-5Z-F |