Briggs & Stratton 5900201, 5901071, 5901074, 5900202, 5900205 User Manual

Parts

p

Manual

IS5000Z Series

Zero-Turn Riding Mower

S/N: 1226 & Above (Tractor) 1210 & Above (Mower)

Models:

5901070 31.5HP Caterpillar Diesel (S/N: 1226 & above) (IS5000Z/C31D)
5901071 31.5HP Caterpillar Diesel (S/N: 1226 & above) (IS5000Z/C31DCE)
5901074 31.5HP Caterpillar Diesel w/ 61" Mower Deck (S/N: 1226 & above) (IS5000Z/C31D61CE)
5900201 61" Rear Discharge Mower Deck (S/N: 1210 & above) (5000/61R)
5900202 61" Rear Discharge Mower Deck (S/N: 1210 & above) (5000/61RCE)
5900203 72" Mower Deck (S/N: 1210 & above) (5000/72)
5900204 72" Rear Discharge Mower Deck (S/N: 1210 & above) (5000/72R)
5900205 72" Rear Discharge Mower Deck (S/N: 1210 & above) (5000/72RCE)

Briggs and Stratton Yard Power Products Group

5375 North Main Street
Munnsville, NY 13409 USA
800-933-6175

Descri

tion:

5023460

Rev. Date:

TP 400-7168-11-5Z-F

01/2007

11Revision

Table Of Content

s

.

g

.

y

g

.

.

y

g

.

y

g

y

(

(

MODEL COMPONENTS PAGE

Main Frame & Front Suspension Group ............................................................................................................................

Hood, Bumper & Shield Group ...........................................................................................................................................

Floor Pan, Brake Cover & Control Shields Group ..............................................................................................................

Seat Compartment Group ..................................................................................................................................................

Seat & Mount Group ..........................................................................................................................................................

Fuel Supply Hose & Tank Replacement Parts Group ........................................................................................................

Fuel Tank & Mount Group ..................................................................................................................................................

Instrument & Control Panel Group .....................................................................................................................................

En

ine Accessories & Service Parts Group .......................................................................................................................

Engine & Mount Group ......................................................................................................................................................

PTO Clutch & Anchor Group ..............................................................................................................................................

Pump Mount & Drive Group ...............................................................................................................................................

Motion Control Group - Lower ............................................................................................................................................

Motion Control Group - Upper ..................................................................................... ............. ..........................................

H

draulic Group .................................................................................................................................................................

Parkin

Parking Brake Group - Upper ............................................................................................................................................

Rear Suspension Group ................................................................................................................. ...................................

Deck Lift Group ..................................................................................................................................................................

Radiator Mount & Service Parts Group ..............................................................................................................................

Gearbox & Mount Group ....................................................................................................................................................

Wheels & Tires Group ........................................................................................................................................................

Decals - Brand & Model ......................................................................... ............................................................................

Decals - Safet

Decals - Safety & Operation - North American Models ......................................................................................................

Oil Cooler, Mount & Radiator Expansion Tank Group ........................................................................................................

61" & 72" Mower Decks - Han

61" Mower Deck - Deflector & Shield .................................................................................................................................

61" Mower Deck - Housing, Covers, Spindles & Blades ....................................................................................................

61" Mower Deck - Pulle

61" Mower Deck - Rollers & Casters ..................................................................................................................................

72" Mower Deck - Deflector & Shield - Rear Discharge .....................................................................................................

72" Mower Deck - Housing, Covers, Spindles & Blades ....................................................................................................

72" Mower Deck - Housin
72" Mower Deck - Belt, Pulle

72" Mower Deck - Rollers & Casters ..................................................................................................................................

61" & 72" Mower Decks - Rear Mount Bars .......................................................................................................................

Electrical Schematics - 
Electrical Schematics - 

Brake Group - Lower .............................................................................................................................................

& Operation - CE Models ..........................................................................................................................

er Chains ..........................................................................................................................

s, Belt & Idler Arm .......................................................................................................................

, Covers, Spindles & Blades - Rear Discharge ........................................................................

s & Idler Arm .......................................................................................................................

S/N: 1290 & below) ...................................................................................................................

S/N: 1291 & above) ...................................................................................................................

Torque Specification Chart ............................................................................................. Inside Back Cover

10
12
14
16
18
20
24
26
28
30
32
36
38
40
42
44
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80

82
84-89
90-95

4
6
8

Main Frame & Front Suspension Group

(

(

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5901071 (S/N: 1226 & above) (IS5000Z/C3
5901070
5901074

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

4

TP 400-7168-11-5Z-F

Main Frame & Front Suspension Group

(

(

PART NO. DESCRIPTIONREF NO. QTY.

1 5061383B 1 MAIN FRAME
2 5025284 4 NUT, 3/4-16 Hex Nylon Lock
3 5046093 2 SPACER, .75 x 1.50 x 1.00
4 5022039 4 BALL JOINT, 3/4-16 Male
5 5025265X28 2 BOLT, 3/4-16 x 3-1/2
6 5025093 4 NUT, 3/4-16 Hex Jam
7 5061400 1 SUSPENSION ARM ASSEMBLY - LH, Complete (Includes Ref Nos. 8 and 9)
8 5023343 4 BUSHING, Flange (Qty. (2) per suspension arm)

9 5020095 2 GREASE FITTING
10 5045769B 2 CASTER TIRE MOUNT
11 5022842 2 SHOCK & SPRING ASSEMBLY
12 5025096 4 NUT, 3/8-16 Hex Nylon Lock
13 5025156 4 WASHER, 3/8" SAE
14 5025013X16 4 BOLT, 3/8-16 x 2
15 5022853 1 SPANNER WRENCH
16 5047461 2 SPACER, .75 x 1.00 x .25
17 5025265X24 2 BOLT, 3/4-16 x 3
18 5021072 2 GREASE SEAL
19 5020884 4 BEARING, Tapered Roller
20 5061399 1 SUSPENSION ARM ASSEMBLY - RH, Complete (Includes Ref Nos. 8 and 9)
21 5025160 2 WASHER, 3/4" SAE
22 5025104 2 NUT, 3/4-16 Hex Slotted
23 5021073 2 CAP
24 5025203X10 2 COTTER PIN, 1/8" X 1-1/4"

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901071 (S/N: 1226 & above) (IS5000Z/C3
5901070
5901074

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

5

TP 400-7168-11-5Z-F

Hood, Bumper & Shield Group

(

(

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

6

TP 400-7168-11-5Z-F

Hood, Bumper & Shield Group

(

(

PART NO. DESCRIPTIONREF NO. QTY.

1 5061433B 1 RADIATOR SHROUD

2 5047555B 1 HOOD

3 5025299X6 6 SCREW, Allen Head, 1/4-20 x 3/4

4 5047552B 1 REAR HOOD SUPPORT

5 5025011X6 4 BOLT, 5/16-18 x 3/4

6 5025155 12 WASHER, 5/16" SAE

7 5048348B 1 FLYWHEEL GUARD-RH (Export models only)

8 5025057 4 NUT, 5/16-18 Hex Nylon Lock

9 5045784B 1 REAR SHIELD
10 5047578B 1 BUMPER
11 5025018X12 2 BOLT, 1/2-20 x 1-1/2
12 5047581B 1 SKID SHIELD
13 5025098 2 NUT, 1/2-20 Hex Nylon Lock
14 5025013X20 2 BOLT, 3/8-16 x 2-1/2
15 5025156 8 WASHER, 3/8" SAE
16 5044992 2 SPACER, .38 x .50 x 1.56
17 5025305 2 WASHER, 3/8 x 1-3/4
18 5025096 2 NUT, 3/8-16 Hex Nylon Lock
19 5025013X10 4 BOLT, 3/8-16 x 1-1/4
20 5025011X8 8 BOLT, 5/16-18 x 1
21 5022308 4 BODY CLIP, 5/16-18
22 5025127 4 NUT, 5/16-18 Hex Small Serrated Flange
23 5025013X8 10 BOLT, 3/8-16 x 1
24 5025128 12 NUT, 3/8-16 Hex Serrated Flange
25 5047545B 1 DEBRIS SHIELD
26 5048349B 1 FLYWHEEL GUARD-LH (Export models only)
27 5047587B 2 SUPPORT PLATE
28 5021029 2 TIE WRAP, 11"
29 5025391 6 NUT, 1/4-20 Hex Nylock Flange
30 5048627B 1 MOUNT, Water Separator
31 5025010X6 4 BOLT, 1/4-20 x 3/4
32 5025154 4 WASHER, 1/4" SAE
33 5022665 4 BODY CLIP, 1/4-20
34 5048557B 2 SIDE BAFFLE
35 5021030 2 TIE WRAP, 5-1/2"
36 5021077 2 GROMMET, 1/2"
37 5050926X17 3 WIPER SEAL, 17"
38 5050926X3 1 WIPER SEAL, 3"

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

7

TP 400-7168-11-5Z-F

Floor Pan, Brake Cover & Control Shields Group

(

(

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

8

TP 400-7168-11-5Z-F

Floor Pan, Brake Cover & Control Shields Group

(

(

PART NO. DESCRIPTIONREF NO. QTY.

1 5025013X8 8 BOLT, 3/8-16 x 1

2 5025156 8 WASHER, 3/8" SAE

3 5047548B 1 SHIELD - RH

4 5025128 8 NUT, 3/8-16 Hex Serrated Flange

5 5047549B 1 SHIELD - LH

6 5022308 2 BODY CLIP, 5/16-18

7 5025340 2 SHOULDER BOLT, 3/8 x 5/8

8 5041600 2 SLEEVE

9 5022816 2 GROMMET
10 5025057 2 NUT, 5/16-18 Hex Nylon Lock
11 5045915 2 SAFETY WALK
12 5045333B 1 FLOOR PAN
13 5044873 1 SAFETY WALK
14 5021877 2 RUBBER PAD
15 5025011X6 2 BOLT, 5/16-18 x 3/4
16 5025155 2 WASHER, 5/16" SAE
17 5047285B 1 HOLD DOWN (Export models only)
18 61547 1 BRAKE COVER PANEL ASSEMBLY (Includes decal)
19 61548 1 BRAKE COVER PANEL ASSEMBLY, Export Model (Includes decal)

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

9

TP 400-7168-11-5Z-F

Seat Compartment Group

(

(

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

10

TP 400-7168-11-5Z-F

Seat Compartment Group

(

(

PART NO. DESCRIPTIONREF NO. QTY.

1 5022596 2 B ATTERY HO LDDOWN BOLT

2 5022595 1 B A T TERY HOLDDO W N

3 - 1 BATTERY, 12V (BCI58, 500 CCA)

4 5025010X6 4 BOLT, 1/4-20 x 3/4

5 5025169 2 WASHER, 1/4" Lock

6 5025154 2 WASHER, 1/4" SAE

7 5047635B 1 OIL FILTER MOUNT

8 5025011X6 4 BOLT, 5/16-18 x 3/4

9 5025155 4 WASHER, 5/16" SAE
10 5025127 4 NUT, 5/16-18 Hex Small Serrated Flange
11 5046061B 2 HOLD DOWN PLATE
12 5025013X18 4 BOLT, 3/8-16 x 2-1/4
13 5025156 4 WASHER, 3/8" SAE
14 5025096 4 NUT, 3/8-16 Hex Nylon Lock
15 5025126 2 NUT, 1/4-20 Hex Serrated Flange
16 5022594 1 ALARM
17 5021397 3 GROMMET, 1-1/4"

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

11

TP 400-7168-11-5Z-F

Seat & Mount Group

(

(

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

12

TP 400-7168-11-5Z-F

Seat & Mount Group

(

(

PART NO. DESCRIPTIONREF NO. QTY.

1 5022955 1 SEAT, Deluxe, Gray, Complete (Includes Ref No. 2 - 6)

2 5022955X1 1 CUSHION, Bo ttom Cover

3 5022955X2 1 CUSHION, Back Cover

4 5022955X3 2 ARM REST SET (Includes Ref No. 5)

5 5022955X4 2 ARM REST PADS

6 5020930X3 1 SEAT ADJUSTER RAILS (set of 2)

7 5047744B 1 SEAT MOUNT

8 5046470 1 SEAT STOP ROD

9 5020047 1 COLLAR, 5/16" Set
10 5025013X32 2 BOLT, 3/8-16 x 4
11 5025057 6 NUT, 5/16-18 Hex Nylon Lock
12 5025096 3 NUT, 3/8-16 Hex Nylon Lock
13 5025013X48 1 BOLT, 3/8-16 x 6
14 5025156 1 WASHER, 3/8" SAE
15 5046586 1 SPACER, .38 X .50 X 5.06
16 5022798 1 SPRING, Compression
17 5025326 1 WASHER, 3/8 x 2
18 5022094 1 SWITCH, Plunger, NO/NC
19 5025270 2 SCREW, #10-24 x 1
20 25029 2 NUT, #10-24 Hex
21 5022612 2 RUBBER BUMPER
22 5100652 1 SPRING, EXTENSION, 4" SEAT ADJUSTMENT (Not shown.)

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

13

TP 400-7168-11-5Z-F

Fuel Supply Hose & Tank Replacement Parts Group

(

(

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

14

TP 400-7168-11-5Z-F

Fuel Supply Hose & Tank Replacement Parts Group

(

(

PART NO. DESCRIPTIONREF NO. QTY.

1 5023060 2 VALVE, Fuel Shut-Off

2 1726400 5 GROMMET

3 5022922 9 CLAMP, #4 Hose

4 5050919X36 2 HOSE, 36"

5 5022920 1 FITTING, TEE, 3/8" Hose

6 5050919X34 1 HOSE, 34"

7 5050831X20 2 1/4" Fuel Line, 20" Long

8 5020835 3 CLAMP, Hos e

9 1674231 2 EL B O W FITTING
10 5023061 1 ELBOW FITTING
11 5022708 2 FITTING, 1/4" NPT, 90 Deg.
12 5022926 1 FILTER/WATER SEPARATOR ASSEMBLY, Complete (Includes Ref No. 13 - 15)
13 5022926X1 1 FUEL FILTER
14 5022926X2 1 O-RING SEAL
15 5022926X3 1 BOWL
16 5050831X48 1 1/4" Fuel Line, 48" Long
17 5025013X12 2 BOLT, 3/8-16 x 1-1/2
18 5025156 2 WASHER, 3/8" SAE
19 5025096 2 NUT, 3/8-16 Hex Nylon Lock
20 50919-63 1 HOSE, 63"
21 5023069 2 HOSE CLAMP
22 5050925X26 1 HOSE, 26"
23 5023068 1 CONNECTOR FITTING

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

15

TP 400-7168-11-5Z-F

Fuel Tank & Mount Group

(

(

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

16

TP 400-7168-11-5Z-F

Fuel Tank & Mount Group

(

(

PART NO. DESCRIPTIONREF NO. QTY.

1 5049120 1 FUEL TANK, IS5000Z, LH

2 5049121 1 FUEL TANK, IS5000Z, RH

3 5022915 2 FUEL TANK CAP, DIESEL (Yellow center, non-vented)

4 5025139 8 NUT, 5/16-18 Hex Large Serrated Flange

5 5025155 20 WASHER, 5/16" SAE

6 5025011X8 8 BOLT, 5/16-18 x 1

7 5048527B 2 FUEL TANK MOUNT

8 5025011X6 12 BOLT, 5/16-18 x 3/4

9 5025170 12 WASHER, 5/16" Lock
10 5047993B 2 GUARD, Tank Valve

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

17

TP 400-7168-11-5Z-F

Instrument & Control Panel Group

(

(

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

18

TP 400-7168-11-5Z-F

Instrument & Control Panel Group

(

(

PART NO. DESCRIPTIONREF NO. QTY.

1 5049178A 1 CONTROL PANEL-RH

2 25179-6 2 SCREW, #10-24 x 3/4

3 5022883X4 1 INDICATOR, Glow Plug

4 5022180 1 SWITCH, PTO

5 5022883X1 1 SWITCH, Ignition, Complete (Includes Ref No. 3 & 4)

6 5022883X2 1 KEY, Ignition (Set of 2)

7 5022883X3 1 COVER PLATE

8 5025299X4 8 SCREW, Allen Head, 1/4-20 x 1/2

9 5048475 1 THROTTLE STOP PLATE (CE models only)
10 5046392 1 CABLE, Throttle Control, 47-1/2"
11 5025271 2 NUT, #10-24 Hex Nylon Lock
12 5046360 1 HANDLE, Throttle Control, Complete (with knob)
13 5046360X1 1 KNOB
14 5022917 1 FUEL GAUGE
15 5022917X1 1 GROMMET
16 5049177A 1 CONTROL PANEL-LH
17 5023244 1 HOURMETER, Digital
18 5022387 1 GAUGE, Voltmeter
19 5022483 1 GAUGE, Water Temperature
20 5046473 1 GAUGE, Warning, Oil/Temp

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

19

TP 400-7168-11-5Z-F

Engine Accessories & Service Parts Group

(

(

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

20

TP 400-7168-11-5Z-F

Engine Accessories & Service Parts Group

(

(

PART NO. DESCRIPTIONREF NO. QTY.

1 5022883X33 1 AIR INLET HOSE

2 5022883X45 1 AIR CLEANER INDICATOR

3 5022591 1 PRE-CLEANER

4 5022883X44 1 AIR CLEANER BRACKET

5 5022883X29 1 AIR CLEANER ASSEMBLY, Complete (Includes Ref No. 6 - 9)

6 5022883X46 1 AIR CLEANER HOUSING ASSEMBLY

7 5022883X31 1 AIR CLEANER ELEMENT

8 5022883X32 1 AIR CLEANER DUST VALVE

9 5022883X30 1 AIR CLEANER COVER
10 5022883X7 1 OIL FILL CAP
11 5022883X8 2 OIL FILL O-RING SEAL
12 5022883X6 1 OIL FILL EXTENSION
13 5047650 1 BARREL CLAMP
14 25179-6 2 SCREW, #10-24 x 3/4
15 5025169 2 WASHER, 1/4" Lock
16 5025248 2 BOLT, M6 x 10MM
17 5022901 1 CLAMP
18 5047392 1 THROTTLE BRACKET
19 5025271 1 NUT, #10-24 Hex Nylon Lock
20 5022883X11 1 OIL FILTER
21 5022883X20 1 DIPSTICK
22 5022883X19B 1 FUEL FILTER ASSEMBLY, Complete (Includes 22883-19C)
23 5022883X19C 1 FILTER ELEMENT
24 5047306 1 STUB SHAFT & FLYWHEEL PLATE ASSEMBLY
25 5025011X10 8 BOLT, 5/16-18 x 1-1/4
26 5025170 12 WASHER, 5/16" Lock
27 5025155 18 WASHER, 5/16" SAE
28 5022883X21 1 OIL PAN PLUG
29 5022883X22 1 WASHER, Oil Pan Plug
30 5025128 2 NUT, 3/8-16 Hex Serrated Flange
31 5025011X8 2 BOLT, 5/16-18 x 1
32 5048600B 1 MUFFLER SUPPORT
33 5025013X14 2 BOLT, 3/8-16 x 1-3/4
34 5023125 1 MUFFLER
35 5023126 1 WIRE GUARD (Export models only)
36 5022308 1 BODY CLIP, 5/16-18
37 5025127 2 NUT, 5/16-18 Hex Small Serrated Flange
38 25237 4 BOLT, M8 x 25MM
39 5022883X36 1 GASKET, Exhaust Manifold
40 5022883X9 1 FUEL SOLENOID (Not an illustrated part)
41 5022883X10 1 WASHER, Fuel Solenoid (Not an illustrated part)

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

21

TP 400-7168-11-5Z-F

Engine Accessories & Service Parts Group

(

(

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

22

TP 400-7168-11-5Z-F

Engine Accessories & Service Parts Group

(

(

PART NO. DESCRIPTIONREF NO. QTY.

42 5022883X12 1 WATER PUMP (Not an illustrated part)
43 5022883X14 1 WATER HOSE-UPPER (Not an illustrated part)
44 5022883X15 1 WATER HOSE-LOWER (Not an illustrated part)
45 5022883X16 1 GASKET, Water Pump (Not an illustrated part)
46 5022883X17 1 THERMOSTAT (Not an illustrated part)
47 5022883X18 1 GASKET, Thermostat (Not an illustrated part)
48 5022883X23 1 STARTER MOTOR (Not an illustrated part)
49 5022883X24 1 ALTERNATOR (Not an illustrated part)
50 5022883X25 1 BELT (Not an illustrated part)
51 5022883X26 1 FUEL PUMP (Not an illustrated part)
52 5022883X27 1 GASKET, Fuel Pump (Not an illustrated part)
53 5022883X28 3 GLOW PLUG (Not an illustrated part)
54 5022883X38 1 RADIATOR (Not an illustrated part)
55 5022883X39 1 SWITCH, Oil Pressure (Not an illustrated part)
56 5022883X40 1 SWITCH, Water Temperature (Not an illustrated part)
57 5022883X41 1 STARTER SOLENOID (Not an illustrated part)
58 5022883X42 1 SEAL, Rear Main (Not an illustrated part)
59 5022883X43 1 SEAL, Front Main (Not an illustrated part)
60 5022883X47 3 INJECTOR ASSEMBLY (Not an illustrated part)
61 5022883X48 3 WASHER, 4-HOLE (Not an illustrated part)
62 5022883X49 3 WASHER, SEALING (Not an illustrated part)
63 5022883X50 3 WASHER, CRUSH (Not an illustrated part)

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

23

TP 400-7168-11-5Z-F

Engine & Mount Group

(

(

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

24

TP 400-7168-11-5Z-F

Engine & Mount Group

(

(

PART NO. DESCRIPTIONREF NO. QTY.

1 5022883 1 ENGINE, Caterpillar 31.5 HP Diesel

2 5025013X20 2 BOLT, 3/8-16 x 2-1/2

3 5025156 5 WASHER, 3/8" SAE

4 5047364B 1 MOTOR MOUNT - RH

5 25357 4 BOLT, M14 x 3 0MM

6 5025013X8 4 BOLT, 3/8-16 x 1

7 5022896 2 ISO MOUNT, Front

8 5044959 2 SPACER, .38 x .50 x 1.00

9 5025013X24 1 BOLT, 3/8-16 x 3
10 5047381 4 WASHER, 3/8 x 2-1/2
11 5022897 1 ISO MOUNT, Rear (2 piece)
12 5047360B 1 MOTOR MOUNT - Upper
13 5025155 2 WASHER, 5/16" SAE
14 5025249 2 BOLT, M8 x 20MM
15 5025171 2 WASHER, 3/8" Lock
16 5025333 2 BOLT, M10 x 30MM
17 5047380 1 SPACER, .38 x .62 x 1.62
18 5025096 3 NUT, 3/8-16 Hex Nylon Lock
19 5025128 4 NUT, 3/8-16 Hex Serrated Flange
20 5047365B 1 MOTOR MOUNT - LH

Footnotes

- See your local Caterpillar engine dealer for parts & service.

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

25

TP 400-7168-11-5Z-F

PTO Clutch & Anchor Group

(

(

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

26

TP 400-7168-11-5Z-F

PTO Clutch & Anchor Group

(

(

PART NO. DESCRIPTIONREF NO. QTY.

1 5025011X8 5 BOLT, 5/16-18 x 1

2 5047563B 1 CLUTCH ANCHOR

3 5021030 1 TIE WRAP, 5-1/2"

4 5025127 2 NUT, 5/16-18 Hex Small Serrated Flange

5 5025045 3 NUT, 5/16-24, Hex Nylon Lock

6 5025155 2 WASHER, 5/16" SAE

7 5044617 3 WASHER, Clutch Anchor

8 5043636 1 C LUTCH ANCHOR PAD

9 5050407X2 1 KEY, 1/4 SQ. X 3
10 5022575 1 BELT, Clutch Drive (set of 2)
11 5045473 1 CRANKSHAFT BOLT, 7/16 x 1-1/2
12 5045475 1 SPACER, .45 x 1.88 x .38
13 5022884 1 PTO CLUTCH
14 5025013X24 1 BOLT, 3/8-16 x 3
15 5025156 4 WASHER, 3/8" SAE
16 5022797 1 PULLEY, Idler
17 5025128 2 NUT, 3/8-16 Hex Serrated Flange
18 1608395 1 SPRING, Extension
19 5025100 1 NUT, 3/8-16 Hex Side Lock
20 5046916 1 SPACER, .51 x 1.75 x .75
21 5022250 2 BUSHING, Flange
22 5020095 1 GREASE FITTING
23 5046565B 1 CLUTCH DRIVE IDLER ARM
24 5045305 1 PIVOT SLEEVE, Long
25 5025158 1 WASHER, 1/2" SAE
26 5025056 1 NUT, 1/2-13 Hex Nylon Lock
27 5025321 1 SCREW HOOK, 3/8-16 x 4-1/4
28 5025096 1 NUT, 3/8-16 Hex Nylon Lock

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

27

TP 400-7168-11-5Z-F

Pump Mount & Drive Group

(

(

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

28

TP 400-7168-11-5Z-F

Pump Mount & Drive Group

(

(

PART NO. DESCRIPTIONREF NO. QTY.

1 5025098 4 NUT, 1/2-20 Hex Nylon Lock

2 5044913 4 WASHER, Frame Retaining

3 5047361B 1 PUMP MOUNT PLATE

4 5025018X14 4 BOLT, 1/2-20 x 1-3/4

5 5022382 2 PULLEY, Pump Drive

6 5022383 2 HUB, Taper Lock

7 5023254 2 KEY, 5MM SQ. x 25MM w/ Round Ends

8 5025010X8 4 BOLT, 1/4-20 x 1

9 5022899 1 PULLEY, Pump Drive
10 5050404X4 1 KEY, 5/16 SQ. X 1-1/4
11 5022314 1 BELT, Pump Drive (set of 2)
12 5025017X40 1 BOLT, 1/2-13 x 5
13 5022847 1 SPRING, Extension, Swivel End
14 5025158 1 WASHER, 1/2" SAE
15 5050857X3P25 1 HOSE, 3-1/4
16 5025301 1 NUT, 1/2-13 Hex Jam
17 5025013X36 1 BOLT, 3/8-16 x 4-1/2
18 5042142B 1 SPRING ANCHOR
19 5044933 2 SPACER, .39 x .75 x .38
20 5025305 1 WASHER, 3/8 x 1-3/4
21 5025100 1 NUT, 3/8-16 Hex Side Lock
22 5025156 8 WASHER, 3/8" SAE
23 5047199 1 SPACER, .38 x .50 x .75
24 5022373 1 PULLEY, Idler, Flat
25 5022157 2 BUSHING, Brass
26 5046574B 1 PUMP DRIVE IDLER ARM
27 5045135 1 SPACER, .39 X 1.00 X 2.55
28 5045475 1 SPACER, .45 x 1.88 x .38
29 5025013X24 1 BOLT, 3/8-16 x 3
30 5025056 1 NUT, 1/2-13 Hex Nylon Lock
31 5025013X8 6 BOLT, 3/8-16 x 1
32 5025128 6 NUT, 3/8-16 Hex Serrated Flange
33 5025096 1 NUT, 3/8-16 Hex Nylon Lock

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

29

TP 400-7168-11-5Z-F

Motion Control Group - Lower

(

(

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

30

TP 400-7168-11-5Z-F

Motion Control Group - Lower

(

(

PART NO. DESCRIPTIONREF NO. QTY.

1 5046393B 2 CONTROL ROD

2 5025035 2 NUT, 3/8-24 Hex

3 5047589 2 LINK, Neutral Adjust

4 25317 2 NUT, 3/8-24 Hex, LH

5 5025013X16 2 BOLT, 3/8-16 x 2

6 5025156 2 WASHER, 3/8" SAE

7 5022392 2 BALL JOINT, 3/8-24 LH, Female

8 5025126 2 NUT, 1/4-20 Hex Serrated Flange

9 5044933 2 SPACER, .39 x .75 x .38
10 5045863 2 CONTROL ARM
11 5025010X14 2 BOLT, 1/4-20 x 1-3/4
12 5025096 2 NUT, 3/8-16 Hex Nylon Lock

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

31

TP 400-7168-11-5Z-F

Motion Control Group - Upper

(

(

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

32

TP 400-7168-11-5Z-F

Motion Control Group - Upper

(

(

PART NO. DESCRIPTIONREF NO. QTY.

1 5047410B 1 CONTROL HANDLE - LH

2 5047411B 1 CONTROL HANDLE - RH (Not Shown)

3 5022068 2 GRIP, Foam

4 5025011X6 6 BOLT, 5/16-18 x 3/4

5 5047137 2 REVERSE RETURN BOLT

6 5047401B 1 NEUTRAL RETURN PLATE

7 5022645 2 SPRING, Compression

8 5025155 6 WASHER, 5/16" SAE

9 5025139 6 NUT, 5/16-18 Hex Large Serrated Flange
10 5025045 2 NUT, 5/16-24, Hex Nylon Lock
11 5025033 2 NUT, 5/16-24 Hex
12 5025211 2 HAIRPIN CLIP
13 5020979 2 CLEVIS, 5/16-24, Plastic
14 5025213X8 2 CLEVIS PIN, 5/16 x 1
15 5025127 6 NUT, 5/16-18 Hex Small Serrated Flange
16 5025055X10 2 BOLT, 5/16-18 x 1-1/4 TFL
17 5025013X14 6 BOLT, 3/8-16 x 1-3/4
18 5047375B 1 MOTION CONTROL SHAFT - LH
19 5047374B 1 MOTION CONTROL SHAFT - RH (Not Shown)
20 5025096 14 NUT, 3/8-16 Hex Nylon Lock
21 5021098 2 BEARING, Flange
22 5025013X8 2 BOLT, 3/8-16 x 1
23 5025128 4 NUT, 3/8-16 Hex Serrated Flange
24 5022912 2 DAMPENER
25 5025013X20 2 BOLT, 3/8-16 x 2-1/2
26 5025165 4 WASHER, 3/8" Fender
27 5047408 2 SPACER, .39 x .75 x .50
28 5025013X18 2 BOLT, 3/8-16 x 2-1/4
29 5046393B 2 CONTROL ROD
30 5025035 2 NUT, 3/8-24 Hex
31 5025156 4 WASHER, 3/8" SAE
32 5021124 2 BALL JOINT, 3/8-24 Male
33 5021499 2 BEARING, Flange
34 5025013X10 4 BOLT, 3/8-16 x 1-1/4
35 5025055X16 4 BOLT, 5/16-18 x 2 TFL
36 5048531B 2 NEUTRAL LOCK PLATE
37 5021379 2 GROMMET, 7/8"
38 5025270 4 SCREW, #10-24 x 1
39 5022438 2 SWITCH, Plunger, NO/NO
40 25029 4 NUT, #10-24 Hex
41 5047004 2 CONTROL LEVER BASE

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

33

TP 400-7168-11-5Z-F

Motion Control Group - Upper

(

(

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

34

TP 400-7168-11-5Z-F

Motion Control Group - Upper

(

(

PART NO. DESCRIPTIONREF NO. QTY.

42 5025170 4 WASHER, 5/16" Lock
43 5025011X6 4 BOLT, 5/16-18 x 3/4

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

35

TP 400-7168-11-5Z-F

Hydraulic Group

(

(

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

36

TP 400-7168-11-5Z-F

Hydraulic Group

(

(

PART NO. DESCRIPTIONREF NO. QTY.

1 5022437 1 CAP, Reservoir

2 5045872 1 HYDRAULIC OIL RESERVOIR

3 5022601 5 FITTING, NPT - JIC #8

4 5048573 1 HOSE ASSEMBLY (24")

5 5022377 1 OIL COOLER

6 5022604 1 FITTING, TEE, JIC #8

7 5048574 1 HOSE ASSEMBLY (13-1/2")

8 5048576 1 HOSE ASSEMBLY (25")

9 5048575 1 HOSE ASSEMBLY (29")
10 5047612 1 HOSE ASSEMBLY (10")
11 5020986 1 PLUG, 1/2" NPT
12 5021356 1 FILTER HEAD
13 5021357 1 FILTER
14 5022602 1 FITTING, TEE, JIC #8, NPT
15 5047611 1 HOSE ASSEMBLY (24")
16 5047610 1 HOSE ASSEMBLY (40")
17 5022368 2 HYDRAULIC WHEEL MOTOR, Complete (Includes Ref No. 18 & 19)
18 5022042X2 2 KEY
19 5022042X3 2 NUT, CASTLE, 1-20
20 5022914 4 HYDRAULIC HOSE ASSEMBLY
21 5022599 4 FITTING, O-Ring, 90 Deg.
22 5022375 1 HYDRAULIC PUMP - LH
23 5022376 1 HYDRAULIC PUMP - RH
24 5025203X16 2 PIN, COTTER, 1/8" X 2"

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

37

TP 400-7168-11-5Z-F

Parking Brake Group - Lower

(

(

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

38

TP 400-7168-11-5Z-F

Parking Brake Group - Lower

(

(

PART NO. DESCRIPTIONREF NO. QTY.

1 5025013X18 2 BOLT, 3/8-16 x 2-1/4

2 5025156 6 WASHER, 3/8" SAE

3 5047125 2 SPACER, .39 x 1.00 x .88

4 5041930 2 SPACER, .38 x .50 x .27

5 5025096 2 NUT, 3/8-16 Hex Nylon Lock

6 5025045 2 NUT, 5/16-24, Hex Nylon Lock

7 5025155 2 WASHER, 5/16" SAE

8 5022361 2 SPRING, Compression

9 5047382B 2 LINK, Brake Lock
10 5023324 2 CABLE, Brake
11 5049388B 1 BRACKET, Cable Mount-LH
12 5049389B 1 BRACKET, Cable Mount-RH (Not Shown)
13 5023320 2 SPRING, Compression
14 5025164 2 WASHER, 5/16" Fender
15 5025033 2 NUT, 5/16-24 Hex
16 5025213X8 2 CLEVIS PIN, 5/16 x 1
17 5023323 2 CLEVIS, Steel, 5/16-24
18 5025203X10 2 COTTER PIN, 1/8" X 1-1/4"
19 25400 4 SHOULDER BOLT, 1/2" x 2-3/4"
20 5023300 2 BRAKE HUB
21 5023299 2 BRAKE CALIPER
22 5049391A 2 BRAKE CALIPER MOUNT
23 5025128 4 NUT, 3/8-16 Hex Serrated Flange

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

39

TP 400-7168-11-5Z-F

Parking Brake Group - Upper

(

(

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

40

TP 400-7168-11-5Z-F

Parking Brake Group - Upper

(

(

PART NO. DESCRIPTIONREF NO. QTY.

1 1722302 1 G R I P

2 5045619B 1 BRAKE HANDLE

3 5025095 2 NUT, 1/4-20 Hex Nylon Lock

4 5025011X8 2 BOLT, 5/16-18 x 1

5 5025127 2 NUT, 5/16-18 Hex Small Serrated Flange

6 5045616B 1 BRAKE HANDLE MOUNT

7 5025010X14 2 BOLT, 1/4-20 x 1-3/4

8 5025128 6 NUT, 3/8-16 Hex Serrated Flange

9 5025013X6 4 BOLT, 3/8-16 x 3/4
10 5021098 2 BEARING, Flange
11 5045610B 1 BRAKE HANDLE SHAFT
12 5045618B 1 BRAKE LINKAGE PIVOT
13 5025010X6 2 BOLT, 1/4-20 x 3/4
14 5025154 2 WASHER, 1/4" SAE
15 5025058X14 1 BOLT, 3/8-16 x 1-3/4 TFL
16 5045621B 1 SWITCH MOUNT BRACKET
17 5025126 2 NUT, 1/4-20 Hex Serrated Flange
18 5022182 2 SWITCH, Plunger, Snap-In, NO/NC

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

41

TP 400-7168-11-5Z-F

Rear Suspension Group

(

(

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

42

TP 400-7168-11-5Z-F

Rear Suspension Group

(

(

PART NO. DESCRIPTIONREF NO. QTY.

1 5025298 2 SET SCREW, Square Head, 1/2-13 x 3

2 5025301 2 NUT, 1/2-13 Hex Jam

3 5025056 12 NUT, 1/2-13 Hex Nylon Lock

4 5025394 4 NUT, 3/8-1 6 Hex Nylock Flange

5 5043815 2 SPACER, .39 x 1.00 x .75

6 5025165 8 WASHER, 3/8" Fender

7 5025013X22 2 BOLT, 3/8-16 x 2-3/4

8 5022912 2 DAMPENER

9 5025013X16 2 BOLT, 3/8-16 x 2
10 5045904 2 SPRING COMPRESSION PLATE
11 5045898 2 SPRING RETAINER
12 5061181 2 SPRING, Compression
13 5045601B 1 SPRING SADDLE-LH
14 5045602B 1 SPRING SADDLE-RH (Not Shown)
15 5045588B 2 WHEEL MOTOR MOUNT
16 5025018X24 4 BOLT, 1/2-20 x 3
17 5025018X20 4 BOLT, 1/2-20 x 2-1/2
18 5046059B 2 SPACER PLATE
19 5025017X52 2 BOLT, 1/2-13 x 6-1/2
20 5025017X60 2 BOLT, 1/2-13 x 7-1/2
21 5025098 8 NUT, 1/2-20 Hex Nylon Lock
22 5061178 4 CAST A-ARM
23 5025294 8 BOLT, Allen Head, 1/2-13 x 3

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

43

TP 400-7168-11-5Z-F

Deck Lift Group

(

(

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

44

TP 400-7168-11-5Z-F

Deck Lift Group

(

(

PART NO. DESCRIPTIONREF NO. QTY.

1 5061232B 1 DECK LIFT LOCK

2 5025158 2 WASHER, 1/2" SAE

3 5025210 1 HAIRPIN CLIP

4 5045058B 1 DECK LIFT PEDAL

5 5022044 1 PIN, Clevis, 1/2 x 2-1/2

6 5025010X6 1 BOLT, 1/4-20 x 3/4

7 5020639 1 S P RING, Exte ns i o n

8 5025126 2 NUT, 1/4-20 Hex Serrated Flange

9 5023241 1 C OLLAR, Split, 1/2
10 5025096 10 NUT, 3/8-16 Hex Nylon Lock
11 5022097 1 CAP
12 5044987B 1 ARM, Deck Lift Pivot
13 5061307B 1 DECK HEIGHT PLATE
14 5044992 4 SPACER, .38 x .50 x 1.56
15 5025013X22 4 BOLT, 3/8-16 x 2-3/4
16 5023082 1 PIN, 1/2 x 3-1/2 w/ Lanyard
17 5044993 1 LIFT PIVOT BOLT
18 5025013X10 4 BOLT, 3/8-16 x 1-1/4
19 5025018X24 2 BOLT, 1/2-20 x 3
20 5044994B 2 DECK LIFT LINK
21 5025098 2 NUT, 1/2-20 Hex Nylon Lock
22 5025282 1 NUT, 5/8-11 Hex Jam Nylon Lock
23 5025392 2 NUT, 5/16-18 Hex Nylock Flange
24 5061355B 2 EYEBOLT ANCHOR
25 5025034 4 NUT, 3/8-16 Hex
26 5025011X8 2 BOLT, 5/16-18 x 1
27 5025516 4 PIN, Roll, 3/16 x 1-1/2
28 5021253 4 SHIM
29 5023343 4 BUSHING, Flange
30 5020095 6 GREASE FITTING
31 5061354 1 LIFT FRAME ASSEMBLY - LH, Complete (Includes Ref No. 27)
32 5061353 1 LIFT FRAME ASSEMBLY - RH, Complete (Includes Ref No. 27, Not Shown)
33 5025056 6 NUT, 1/2-13 Hex Nylon Lock
34 5022434 8 BALL JOINT, 1/2-20 Male
35 5047027 4 SPACER, .51 X .75 X .56
36 5061358B 2 DECK LIFT PIVOT - LH
37 5061357B 2 DECK LIFT PIVOT - RH (Not Shown)
38 5049777 2 SPACER, .52 x 1.00 x 1.00
39 5025158 4 WASHER, 1/2" SAE
40 5025017X32 4 BOLT, 1/2-13 x 4
41 - 8 NUT, 1/2-20 Hex

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

45

TP 400-7168-11-5Z-F

Deck Lift Group

(

(

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

46

TP 400-7168-11-5Z-F

Deck Lift Group

(

(

PART NO. DESCRIPTIONREF NO. QTY.

42 5061350 2 DECK LIFT ROD - OUTER
43 5043607 2 SPACER, .50 x 1.00 x 2.00
44 5061349 2 DECK LIFT ROD - INNER
45 5021811 2 EYEBOLT, 3/8" x 8"
46 5023392 2 DECK LIFT SPRING
47 25017-18 2 BOLT, 1/2-13 x 2-1/4
48 5025013X16 2 BOLT, 3/8-16 x 2
49 5025156 2 WASHER, 3/8" SAE
50 5061227 2 DECK PIVOT BUSHING
51 5061224B 2 SPRING LINK
52 5025326 2 WASHER, 3/8 x 2
53 5061348B 1 DECK LIFT SHAFT & MOUNT ASSEMBLY

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

47

TP 400-7168-11-5Z-F

Radiator Mount & Service Parts Group

(

(

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

48

TP 400-7168-11-5Z-F

Radiator Mount & Service Parts Group

(

(

PART NO. DESCRIPTIONREF NO. QTY.

1 5023129 1 SCREEN

2 5023150 1 PRESSURE CAP

3 5023127 1 RADIATOR

4 5048534B 1 SCREEN BRACKET-RH

5 5023128 1 FAN SHROUD

6 5023158 20 BOLT, Flange Head, 5/16-18 x 1/2

7 5023134 1 F INGER GUARD - R H

8 5025057 4 NUT, 5/16-18 Hex Nylon Lock

9 5025155 7 WASHER, 5/16" SAE
10 5048578B 1 RADIATOR MOUNT PLATE
11 5025249 2 BOLT, M8 x 20MM
12 5025170 3 WASHER, 5/16" Lock
13 5025337 2 WASHER, 5/16" USS
14 5025011X6 1 BOLT, 5/16-18 x 3/4
15 5048579B 1 RADIATOR MOUNT BRACKET
16 5023130 1 ISO-MOUNT, Top
17 5023135 1 FINGER GUARD-LH
18 5023131 2 ISO-MOUNT, Bottom (2 piece)
19 5025305 2 WASHER, 3/8 x 1-3/4
20 5025096 2 NUT, 3/8-16 Hex Nylon Lock
21 5048503B 1 RADIATOR MOUNT
22 25197 8 WASHER, 1/2" USS
23 5025383 4 BOLT, M14 x 25MM
24 5025382 4 BOLT, M14 x 35MM
25 5022308 2 BODY CLIP, 5/16-18
26 5048565B 1 RETAINING PLATE
27 5048563 1 LOWER SEAL
28 5048564B 1 RETAINING PLATE, Outer
29 5025011X8 5 BOLT, 5/16-18 x 1
30 5023151 1 PETCOCK VALVE
31 5048533B 1 SCREEN BRACKET-LH
32 5061419 1 OVERFLOW HOSE

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

49

TP 400-7168-11-5Z-F

Gearbox & Mount Group

(

(

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

50

TP 400-7168-11-5Z-F

Gearbox & Mount Group

(

(

PART NO. DESCRIPTIONREF NO. QTY.

1 5022378 1 GEARBOX

2 5046349B 2 GEARBOX MOUNT BRACKET

3 5022908 1 PULLEY, Gearbox Input

4 5100039 2 KEY, 1/4 SQ. X 1

5 5025010X8 4 BOLT, 1/4-20 x 1

6 5020819 2 BUSHING, Tapered Hub

7 5022794 1 PULLEY, Spindle

8 5025038 3 NUT, 1/2-13 Hex

9 5044913 3 WASHER, Frame Retaining
10 25324-16 3 CARRIAGE BOLT, 1/2-13 x 2
11 5025334 1 CARRIAGE BOLT, 1/2-13 x 7
12 5025011X8 8 BOLT, 5/16-18 x 1
13 5025170 8 WASHER, 5/16" Lock
14 5025155 8 WASHER, 5/16" SAE

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

51

TP 400-7168-11-5Z-F

Wheels & Tires Group

(

(

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

52

TP 400-7168-11-5Z-F

Wheels & Tires Group

(

(

PART NO. DESCRIPTIONREF NO. QTY.

1 5023136 2 WHEEL & TIRE ASSEMBLY, 13 x 6.5 x 6, Complete (Includes Ref No. 2 - 5)

2 5022577 2 TIRE, Front, 13 x 6.5 x 6

3 5023136X1 2 WHEEL ASSEMBLY, for 13 x 6.5 x 6 Tires, Complete (Includes Ref No. 4 & 5)

4 5022631SX2 4 BEARING, Taper Roller (2 per tire)

5 5022631SX3 4 GREASE SEAL (2 per tire)

6 5047103 4 ADAPTER, Caster Wheel (2 per tire)

7 5025017X72 2 BOLT, 1/2-13 x 9

8 5025056 2 NUT, 1/2-13 Hex Nylon Lock

9 5023363 2 WHEEL & TIRE ASSEMBLY, 26 x 12 x 12, Complete (Includes Ref No. 10 & 11)
10 5023152X1 2 TIRE, Rear, 26 x 12 x 12
11 5023364 2 WHEEL ASSEMBLY, 12 x 8.5
12 5022215 10 WHEEL LUG, 1/2 x 1-5/8

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

53

TP 400-7168-11-5Z-F

Decals - Brand & Model

(

(

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

54

TP 400-7168-11-5Z-F

Decals - Brand & Model

(

(

PART NO. DESCRIPTIONREF NO. QTY.

1 5022227 1 DECAL, Ferris Logo, 6-3/8"

2 5022556 1 DECAL, Ferris Logo, 5"

3 5022239 1 DECAL, First w/ Independent Suspension

4 5022555 1 DECAL, IS Independent Suspension

5 5022929 2 DECAL, CAT Diesel Power

6 5022813 1 D E CAL, 61"

7 5022814 1 D E CAL, 72"

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

55

TP 400-7168-11-5Z-F

Decals - Safety & Operation - CE Models

(

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3

2007

56

TP 400-7168-11-5Z-F

Decals - Safety & Operation - CE Models

(

PART NO. DESCRIPTIONREF NO. QTY.

1 5049200 1 DECAL, Control Panel

2 5061108 1 DECAL, Main, CE

3 5061217 1 DECAL, Danger, Open Flame

4 5061042 3 DECAL, Warning, Hand In Belt (Two on deck, one under rear belt guard)

5 1720389 2 DECAL, Warning, Mower

6 5061246 2 DECAL, Pinch Point, CE

7 1725941 1 DECAL, CZT Hydro Release

8 1704473 1 DECAL, Hot Surface

9 5047696 1 DECAL, Priming Instructions
10 5022063 1 DECAL, Deck Height
11 5045923 1 DECAL, Oil Reservoir
12 5047554 1 DECAL, Fuse Location
13 5021036 2 DECAL, Grease Daily

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3

2007

57

TP 400-7168-11-5Z-F

Decals - Safety & Operation - North American Models

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5901070 (S/N: 1226 & above) (IS5000Z/C3

© Copyright Briggs and Stratton. All Rights Reserved.

2007

58

TP 400-7168-11-5Z-F

Decals - Safety & Operation - North American Models

PART NO. DESCRIPTIONREF NO. QTY.

1 5049200 1 DECAL, Control Panel

2 5061106 1 DE CA L , M a in

3 5049658 1 D E CAL, Danger

4 5020337 2 DE CA L , Warning

5 5061245 2 DECAL, Pinch Point

6 1704277 1 DECAL, Danger (Chute In Place)

7 1704276 1 DECAL, Danger (Hand Under Deck)

8 5047696 1 DECAL, Priming Instructions

9 5022063 1 DECAL, Deck Height
10 5045923 1 DECAL, Oil Reservoir
11 5047554 1 DECAL, Fuse Location
12 5021036 2 DECAL, Grease Daily

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901070 (S/N: 1226 & above) (IS5000Z/C3

© Copyright Briggs and Stratton. All Rights Reserved.

2007

59

TP 400-7168-11-5Z-F

Oil Cooler, Mount & Radiator Expansion Tank Group

(

(

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

60

TP 400-7168-11-5Z-F

Oil Cooler, Mount & Radiator Expansion Tank Group

(

(

PART NO. DESCRIPTIONREF NO. QTY.

1 5025011X8 5 BOLT, 5/16-18 x 1

2 5025155 5 WASHER, 5/16" SAE

3 5048577B 2 OIL COOLER PIVOT PLATE

4 48582 1 OVERFLOW HOSE

5 5020835 1 CLAMP, Hos e

6 5022883X34 1 EXPANSION TANK, Complete (Includes Ref No. 7)

7 5022883X35 1 CAP

8 5025010X8 2 BOLT, 1/4-20 x 1

9 5025154 2 WASHER, 1/4" SAE
10 5025095 3 NUT, 1/4-20 Hex Nylon Lock
11 5025139 4 NUT, 5/16-18 Hex Large Serrated Flange
12 5022308 2 BODY CLIP, 5/16-18
13 5048580B 1 COOLER PIVOT ANCHOR
14 5025299X4 5 SCREW, Allen Head, 1/4-20 x 1/2
15 5048581B 1 COOLER LOCK BRACKET
16 5020602 2 COLLAR, 1" Split
17 5022319 1 KNOB
18 5025126 4 NUT, 1/4-20 Hex Serrated Flange
19 5022377 1 OIL COOLER
20 5048562B 1 OIL COOLER MOUNT

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

61

TP 400-7168-11-5Z-F

61" & 72" Mower Decks - Hanger Chains

)

)

(

)

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5900203 (S/N: 1210 & above) (5000/72
5900204 (S/N: 1210 & above) (5000/72R
5900205 (S/N: 1210 & above) (5000/72RC
5900201
5900202 (S/N: 1210 & above) (5000/61RC

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1210 & above) (5000/61R

2007

62

TP 400-7168-11-5Z-F

61" & 72" Mower Decks - Hanger Chains

)

)

(

)

PART NO. DESCRIPTIONREF NO. QTY.

1 5025096 4 NUT, 3/8-16 Hex Nylon Lock

2 5025084 4 NUT, 3/8-16 Hex Jam

3 5025156 12 WASHER, 3/8" SAE

4 5050878X3 2 CHAIN, 3 LINKS

5 5025013X14 6 BOLT, 3/8-16 x 1-3/4

6 5025128 4 NUT, 3/8-16 Hex Serrated Flange

7 5045026 2 FRONT DECK HANGER

8 5025038 2 NUT, 1/2-13 Hex

9 5025158 4 WASHER, 1/2" SAE
10 5025056 2 NUT, 1/2-13 Hex Nylon Lock
11 5050878X5 2 CHAIN, 5 LINKS

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900203 (S/N: 1210 & above) (5000/72
5900204 (S/N: 1210 & above) (5000/72R
5900205 (S/N: 1210 & above) (5000/72RC
5900201
5900202 (S/N: 1210 & above) (5000/61RC

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1210 & above) (5000/61R

2007

63

TP 400-7168-11-5Z-F

61" Mower Deck - Deflector & Shield

)

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5900201 (S/N: 1210 & above) (5000/61R
5900202 (S/N: 1210 & above) (5000/61RC

© Copyright Briggs and Stratton. All Rights Reserved.

2007

64

TP 400-7168-11-5Z-F

61" Mower Deck - Deflector & Shield

)

PART NO. DESCRIPTIONREF NO. QTY.

1 5025057 11 NUT, 5/16-18 Hex Nylon Lock

2 5048418B 1 SHIELD

3 5025011X8 7 BOLT, 5/16-18 x 1

4 5025145X8 4 CARRIAGE BOLT, 5/16-18 x 1

5 5048244B 1 DEFECTOR MOUNT

6 5048243 1 RUBBER DEFLECTOR

7 5048245B 1 RETAINING PLATE

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900201 (S/N: 1210 & above) (5000/61R
5900202 (S/N: 1210 & above) (5000/61RC

© Copyright Briggs and Stratton. All Rights Reserved.

2007

65

TP 400-7168-11-5Z-F

61" Mower Deck - Housing, Covers, Spindles & Blades

)

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5900201 (S/N: 1210 & above) (5000/61R
5900202 (S/N: 1210 & above) (5000/61RC

© Copyright Briggs and Stratton. All Rights Reserved.

2007

66

TP 400-7168-11-5Z-F

61" Mower Deck - Housing, Covers, Spindles & Blades

)

PART NO. DESCRIPTIONREF NO. QTY.

1 5300066 1 ASSM, MOWER DECK 61" REAR DISCHARGE (Includes safety decals.)

2 5061157B 1 DECK SHIELD - RH

3 5061156B 1 DECK SHIELD - LH

4 5022308 6 BODY CLIP, 5/16-18

5 5025155 6 WASHER, 5/16" SAE

6 5025011X6 6 BOLT, 5/16-18 x 3/4

7 5025394 18 NUT, 3/8-16 Hex Nylock Flange

8 5049438 3 SPINDLE ASSEMBLY, Complete

9 5025390X10 18 BOLT, Flange Head, 3/8-16 x 1-1/4
10 5020842 3 MOWER BLADE, 21"
11 5023272 3 MOWER BLADE, SAND, 21" (Applies to CE model only)
12 5025159 3 WASHER, 5/8" USS
13 5025320X14 3 BOLT, 5/8-11 x 1-3/4
14 5023156 12 BOLT, Flange Head, 5/16-18 x 1-1/4 (Applies to CE model only)
15 5047408 8 SPACER, .39 x .75 x .50 (Applies to CE model only)
16 5025392 12 NUT, 5/16-18 Hex Nylock Flange (Applies to CE model only)
17 5061412B 1 BLOWOUT BAFFLE - LH (Applies to CE model only)
18 5061413B 1 BAFFLE REINFORCEMENT (Applies to CE model only)
19 5061411B 1 BLOWOUT BAFFLE - RH (Applies to CE model only)

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900201 (S/N: 1210 & above) (5000/61R
5900202 (S/N: 1210 & above) (5000/61RC

© Copyright Briggs and Stratton. All Rights Reserved.

2007

67

TP 400-7168-11-5Z-F

61" Mower Deck - Pulleys, Belt & Idler Arm

)

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5900201 (S/N: 1210 & above) (5000/61R
5900202 (S/N: 1210 & above) (5000/61RC

© Copyright Briggs and Stratton. All Rights Reserved.

2007

68

TP 400-7168-11-5Z-F

61" Mower Deck - Pulleys, Belt & Idler Arm

)

PART NO. DESCRIPTIONREF NO. QTY.

1 5023123 1 BELT

2 5025017X36 1 BOLT, 1/2-13 x 4-1/2

3 5025150 2 WASHER, 1/2" USS

4 5045022 1 SPACER, .52 x 1.00 x 3.50

5 5021541 2 BUSHING, Flange

6 5020095 1 GREASE FITTING

7 5045019B 1 IDLER ARM

8 5025018X24 1 BOLT, 1/2-20 x 3

9 5025098 2 NUT, 1/2-20 Hex Nylon Lock
10 5025158 4 WASHER, 1/2" SAE
11 5021976 4 PULLEY, Idler
12 5045023 2 SPACER, .52 x 1.00 x .44
13 5023340 1 SPRING, Extension, Swivel End
14 5025096 1 NUT, 3/8-16 Hex Nylon Lock
15 5025128 1 NUT, 3/8-16 Hex Serrated Flange
16 5025056 1 NUT, 1/2-13 Hex Nylon Lock
17 5022800 1 HOLE PLUG
18 5025018X28 3 BOLT, 1/2-20 x 3-1/2
19 5025058X14 1 BOLT, 3/8-16 x 1-3/4 TFL
20 5045024B 3 IDLER PULLEY MOUNT
21 5020815 3 PULLEY, Spindle
22 5022726 3 KEY, 1/4 SQ. X 1-1/2
23 5020819 3 BUSHING, Tapered Hub
24 5025010X8 6 BOLT, 1/4-20 x 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900201 (S/N: 1210 & above) (5000/61R
5900202 (S/N: 1210 & above) (5000/61RC

© Copyright Briggs and Stratton. All Rights Reserved.

2007

69

TP 400-7168-11-5Z-F

61" Mower Deck - Rollers & Casters

)

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5900201 (S/N: 1210 & above) (5000/61R
5900202 (S/N: 1210 & above) (5000/61RC

© Copyright Briggs and Stratton. All Rights Reserved.

2007

70

TP 400-7168-11-5Z-F

61" Mower Deck - Rollers & Casters

)

PART NO. DESCRIPTIONREF NO. QTY.

1 5020785 1 ROLLER

2 5041655B 1 PIN, Roller Mount

3 5025155 1 WASHER, 5/16" SAE

4 5025011X8 1 BOLT, 5/16-18 x 1

5 5025139 1 NUT, 5/16-18 Hex Large Serrated Flange

6 5025128 4 NUT, 3/8-16 Hex Serrated Flange

7 5025013X8 4 BOLT, 3/8-16 x 1

8 5048537B 1 CASTER MOUNT-LH

9 5048536B 1 CASTER MOUNT-RH
10 5025013X36 2 BOLT, 3/8-16 x 4-1/2
11 5045992 2 SPACER, .39 x .63 x 2.56
12 1716353 2 GAUGE WHEEL
13 5046446 2 SPACER, .39 x 1.00 x .79
14 5025096 2 NUT, 3/8-16 Hex Nylon Lock

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900201 (S/N: 1210 & above) (5000/61R
5900202 (S/N: 1210 & above) (5000/61RC

© Copyright Briggs and Stratton. All Rights Reserved.

2007

71

TP 400-7168-11-5Z-F

72" Mower Deck - Deflector & Shield - Rear Discharge

)

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5900204 (S/N: 1210 & above) (5000/72R
5900205 (S/N: 1210 & above) (5000/72RC

© Copyright Briggs and Stratton. All Rights Reserved.

2007

72

TP 400-7168-11-5Z-F

72" Mower Deck - Deflector & Shield - Rear Discharge

)

PART NO. DESCRIPTIONREF NO. QTY.

1 5025145X6 3 CARRIAGE BOLT, 5/16-18 x 3/4

2 5048418B 1 SHIELD

3 5025057 9 NUT, 5/16-18 Hex Nylon Lock

4 5025011X8 9 BOLT, 5/16-18 x 1

5 5048469B 1 DEFLECTOR MOUNT

6 5025155 3 WASHER, 5/16" SAE

7 5025170 3 WASHER, 5/16" Lock

8 5048470 1 RUBBER DEFLECTOR

9 5048471B 1 RETAINING PLATE

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900204 (S/N: 1210 & above) (5000/72R
5900205 (S/N: 1210 & above) (5000/72RC

© Copyright Briggs and Stratton. All Rights Reserved.

2007

73

TP 400-7168-11-5Z-F

72" Mower Deck - Housing, Covers, Spindles & Blades

)

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5900203 (S/N: 1210 & above) (5000/72

© Copyright Briggs and Stratton. All Rights Reserved.

2007

74

TP 400-7168-11-5Z-F

72" Mower Deck - Housing, Covers, Spindles & Blades

)

PART NO. DESCRIPTIONREF NO. QTY.

1 5061288 1 RUBBER CHUTE ASSEMBLY, Complete (Includes Ref No. 2 - 6)

2 5025394 3 NUT, 3/8-1 6 Hex Nylock Flange

3 5061293B 1 C HUTE FRAME

4 5402403 1 RUBBER CHUTE

5 5061290B 1 CHUTE SUPPORT

6 5025013X10 3 BOLT, 3/8-16 x 1-1/4

7 5025045 2 NUT, 5/16-24, Hex Nylon Lock

8 5061300 1 CHUTE MOUNT ROD

9 5025392 13 NUT, 5/16-18 Hex Nylock Flange
10 5025411 1 BOLT, Flange Head, 5/16-18 x 3/4
11 5061213B 1 SPINDLE COVER - RH
12 5061214B 1 SPINDLE COVER - LH
13 5300062 1 ASSM, MOWER DECK, 72" SIDE DISCHARGE (Includes safety decals.)
14 5022308 6 BODY CLIP, 5/16-18
15 5025155 6 WASHER, 5/16" SAE
16 5025011X6 6 BOLT, 5/16-18 x 3/4
17 5025394 18 NUT, 3/8-16 Hex Nylock Flange
18 5049438 3 SPINDLE ASSEMBLY, Complete
19 5025390X10 18 BOLT, Flange Head, 3/8-16 x 1-1/4
20 5022476 3 MOWER BLADE, 25"
21 5025159 3 WASHER, 5/8" USS
22 5025320X14 3 BOLT, 5/8-11 x 1-3/4

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900203 (S/N: 1210 & above) (5000/72

© Copyright Briggs and Stratton. All Rights Reserved.

2007

75

TP 400-7168-11-5Z-F

72" Mower Deck - Housing, Covers, Spindles & Blades - Rear Discharge

)

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5900204 (S/N: 1210 & above) (5000/72R
5900205 (S/N: 1210 & above) (5000/72RC

© Copyright Briggs and Stratton. All Rights Reserved.

2007

76

TP 400-7168-11-5Z-F

72" Mower Deck - Housing, Covers, Spindles & Blades - Rear Discharge

)

PART NO. DESCRIPTIONREF NO. QTY.

1 5300068 1 ASSM, MOWER DECK 72 RD (Includes safety decals.)

2 5061213B 1 SPINDLE C OVER - RH

3 5061214B 1 SPINDLE C OVER - LH

4 5022308 6 BODY CLIP, 5/16-18

5 5025155 6 WASHER, 5/16" SAE

6 5025011X6 6 BOLT, 5/16-18 x 3/4

7 5025394 18 NUT, 3/8-16 Hex Nylock Flange

8 5049438 3 SPINDLE ASSEMBLY, Complete

9 5025390X10 18 BOLT, Flange Head, 3/8-16 x 1-1/4
10 5022476 3 MOWER BLADE, 25"
11 5023273 3 MOWER BLADE, SAND, 25" (Applies to CE model only)
12 5025159 3 WASHER, 5/8" USS
13 5025320X14 3 BOLT, 5/8-11 x 1-3/4
14 5023156 12 BOLT, Flange Head, 5/16-18 x 1-1/4 (Applies to CE model only)
15 5047408 8 SPACER, .39 x .75 x .50 (Applies to CE model only)
16 5025392 12 NUT, 5/16-18 Hex Nylock Flange (Applies to CE model only)
17 5061409B 1 BLOWOUT BAFFLE - LH (Applies to CE model only)
18 5061413B 1 BAFFLE REINFORCEMENT (Applies to CE model only)
19 5061408B 1 BLOWOUT BAFFLE - RH (Applies to CE model only)

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900204 (S/N: 1210 & above) (5000/72R
5900205 (S/N: 1210 & above) (5000/72RC

© Copyright Briggs and Stratton. All Rights Reserved.

2007

77

TP 400-7168-11-5Z-F

72" Mower Deck - Belt, Pulleys & Idler Arm

)

)

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5900203 (S/N: 1210 & above) (5000/72
5900204 (S/N: 1210 & above) (5000/72R
5900205 (S/N: 1210 & above) (5000/72RC

© Copyright Briggs and Stratton. All Rights Reserved.

2007

78

TP 400-7168-11-5Z-F

72" Mower Deck - Belt, Pulleys & Idler Arm

)

)

PART NO. DESCRIPTIONREF NO. QTY.

1 5022439 1 BELT

2 5025017X36 1 BOLT, 1/2-13 x 4-1/2

3 5025150 2 WASHER, 1/2" USS

4 5045022 1 SPACER, .52 x 1.00 x 3.50

5 5021541 2 BUSHING, Flange

6 5020095 1 GREASE FITTING

7 5045019B 1 IDLER ARM

8 5025018X24 1 BOLT, 1/2-20 x 3

9 5025098 2 NUT, 1/2-20 Hex Nylon Lock
10 5025158 4 WASHER, 1/2" SAE
11 5021976 4 PULLEY, Idler
12 5045023 2 SPACER, .52 x 1.00 x .44
13 5023340 1 SPRING, Extension, Swivel End
14 5025096 1 NUT, 3/8-16 Hex Nylon Lock
15 5025128 1 NUT, 3/8-16 Hex Serrated Flange
16 5025056 1 NUT, 1/2-13 Hex Nylon Lock
17 5025058X14 1 BOLT, 3/8-16 x 1-3/4 TFL
18 5025018X28 3 BOLT, 1/2-20 x 3-1/2
19 5045024B 3 IDLER PULLEY MOUNT
20 5022794 3 PULLEY, Spindle
21 5022726 3 KEY, 1/4 SQ. X 1-1/2
22 5020819 3 BUSHING, Tapered Hub
23 5025010X8 6 BOLT, 1/4-20 x 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900203 (S/N: 1210 & above) (5000/72
5900204 (S/N: 1210 & above) (5000/72R
5900205 (S/N: 1210 & above) (5000/72RC

© Copyright Briggs and Stratton. All Rights Reserved.

2007

79

TP 400-7168-11-5Z-F

72" Mower Deck - Rollers & Casters

)

)

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5900203 (S/N: 1210 & above) (5000/72
5900204 (S/N: 1210 & above) (5000/72R
5900205 (S/N: 1210 & above) (5000/72RC

© Copyright Briggs and Stratton. All Rights Reserved.

2007

80

TP 400-7168-11-5Z-F

72" Mower Deck - Rollers & Casters

)

)

PART NO. DESCRIPTIONREF NO. QTY.

1 5020785 1 ROLLER

2 5041655B 1 PIN, Roller Mount

3 5025156 1 WASHER, 3/8" SAE

4 5025013X8 1 BOLT, 3/8-16 x 1

5 5025128 5 NUT, 3/8-16 Hex Serrated Flange

6 5020655 2 P I N , Ly nch

7 5041476 6 SPACER, 1.02 x 1.56 x .50

8 5021541 4 BUSHING, Flange

9 5046965B 2 CASTER MOUNT ARM
10 5020095 2 GREASE FITTING
11 5025013X6 4 BOLT, 3/8-16 x 3/4
12 5022098 2 CAP, Plastic
13 5045034B 2 CASTER ROLLER PIN
14 5045188B 2 CASTER YOKE
15 5022060 2 ROLLER, Caster
16 5025011X6 2 BOLT, 5/16-18 x 3/4
17 5025127 2 NUT, 5/16-18 Hex Small Serrated Flange
18 5025292 2 WASHER, 5/16" GD9

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900203 (S/N: 1210 & above) (5000/72
5900204 (S/N: 1210 & above) (5000/72R
5900205 (S/N: 1210 & above) (5000/72RC

© Copyright Briggs and Stratton. All Rights Reserved.

2007

81

TP 400-7168-11-5Z-F

61" & 72" Mower Decks - Rear Mount Bars

)

)

(

)

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:

5900203 (S/N: 1210 & above) (5000/72
5900204 (S/N: 1210 & above) (5000/72R
5900205 (S/N: 1210 & above) (5000/72RC
5900201
5900202 (S/N: 1210 & above) (5000/61RC

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1210 & above) (5000/61R

2007

82

TP 400-7168-11-5Z-F

61" & 72" Mower Decks - Rear Mount Bars

)

)

(

)

PART NO. DESCRIPTIONREF NO. QTY.

1 5045009 2 DECK PUSHER BAR, Complete (Includes Ref No. 13)

2 5020095 2 GREASE FITTING

3 5025093 2 NUT, 3/4-16 Hex Jam

4 5025265X24 2 BOLT, 3/4-16 x 3

5 5022111 4 ROD END SEAL

6 5022039 2 BALL JOINT, 3/4-16 Male

7 5025160 2 WASHER, 3/4" SAE

8 5025284 2 NUT, 3/4-16 Hex Nylon Lock

9 5025096 2 NUT, 3/8-16 Hex Nylon Lock
10 5045037B 2 PUSHER BAR MOUNT PIN
11 5025013X10 2 BOLT, 3/8-16 x 1-1/4
12 5025156 4 WASHER, 3/8" SAE
13 5023344 8 BUSHING (Qty. (4) per pusher bar)

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900203 (S/N: 1210 & above) (5000/72
5900204 (S/N: 1210 & above) (5000/72R
5900205 (S/N: 1210 & above) (5000/72RC
5900201
5900202 (S/N: 1210 & above) (5000/61RC

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1210 & above) (5000/61R

2007

83

TP 400-7168-11-5Z-F

Electrical Schematic - Charging Circuit

(

(

(S/N: 1290 & below)

168escc0

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

84

TP 400-7168-11-5Z-F

Electrical Schematic - Cranking Circuit

(

(

(S/N: 1290 & below)

168escr0

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

85

TP 400-7168-11-5Z-F

Electrical Schematic - Operator Presence/Safety Circuit

(

(

(S/N: 1290 & below)

168esci0

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

86

TP 400-7168-11-5Z-F

Electrical Schematic - PTO & Hourmeter Circuit

(

(

(S/N: 1290 & below)

168escp0

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

87

TP 400-7168-11-5Z-F

Electrical Schematic - Gauges & Alarm Circuit

(

(

(S/N: 1290 & below)

168escg0

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

88

TP 400-7168-11-5Z-F

Electrical Schematic - Glow Plug Heat Circuit

(

(

(S/N: 1290 & below)

168esch0

The above parts group applies to the following Mfg. Nos.:

5901074 (S/N: 1226 & above) (IS5000Z/C3
5901071
5901070

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

89

TP 400-7168-11-5Z-F

Electrical Schematic - Charging Circuit

(

(

(S/N: 1291 & above)

168escc1

The above parts group applies to the following Mfg. Nos.:

5901070 (S/N: 1226 & above) (IS5000Z/C3
5901074
5901071

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

90

TP 400-7168-11-5Z-F

Electrical Schematic - Cranking Circuit

(

(

(S/N: 1291 & above)

168escr1

The above parts group applies to the following Mfg. Nos.:

5901070 (S/N: 1226 & above) (IS5000Z/C3
5901074
5901071

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

91

TP 400-7168-11-5Z-F

Electrical Schematic - Operator Presence/Safety Circuit

(

(

(S/N: 1291 & above)

168esci1

The above parts group applies to the following Mfg. Nos.:

5901070 (S/N: 1226 & above) (IS5000Z/C3
5901074
5901071

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

92

TP 400-7168-11-5Z-F

Electrical Schematic - PTO & Hourmeter Circuit

(

(

(S/N: 1291 & above)

168escp1

The above parts group applies to the following Mfg. Nos.:

5901070 (S/N: 1226 & above) (IS5000Z/C3
5901074
5901071

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

93

TP 400-7168-11-5Z-F

Electrical Schematic - Gauges & Alarm Circuit

(

(

(S/N: 1291 & above)

168escg1

The above parts group applies to the following Mfg. Nos.:

5901070 (S/N: 1226 & above) (IS5000Z/C3
5901074
5901071

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

94

TP 400-7168-11-5Z-F

Electrical Schematic - Glow Plug Heat Circuit

(

(

(S/N: 1291 & above)

168esch1

The above parts group applies to the following Mfg. Nos.:

5901070 (S/N: 1226 & above) (IS5000Z/C3
5901074
5901071

© Copyright Briggs and Stratton. All Rights Reserved.

S/N: 1226 & above) (IS5000Z/C3
S/N: 1226 & above) (IS5000Z/C3

2007

95

TP 400-7168-11-5Z-F

Hardware Identification & Torque Specifications

Common Hardware Types

Hex Head Capscrew

Carriage Bolt

Standard Hardware Sizing

When a washer or nut is identified as 1/2”, this is the

Nominal size

second number is present it represent the
When bolt or capscrew is identified as 1/2 - 16 x 2”, this

means the
second number represents the
example, and the final number is the
bolt or screw (in this example 2 inches long).

, meaning the

Nominal size

inside diameter

, or

body diameter

threads per inch

body length

Washer

Lockwasher

Hex Nut

is 1/2 inch; if a

threads per inch

is 1/2 inch; the

(16 in this

of the

The guides and ruler furnished below are designed to
help you select the appropriate hardware and tools.

0

1/4 3/4

1/2

Nut, 1/2”

Inside
Diameter

1

1/4 3/4

1/2

Screw, 1/2 x 2

2

1/4 3/4

1/2

3

1/4 3/4

1/2

4

Body

Diameter

Body

Length

Torque Specification Chart

FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)

Hardware
Grade

Size Of
Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.

8-32
8-36
10-24
10-32
1/4-20
1/4-28
5/16-18 11 15.0 17 23.1 25 34.0
5/16-24 12 16.3 19 25.8 27 34.0
3/8-16 20 27.2 30 40.8 45 61.2
3/8-24 23 31.3 35 47.6 50 68.0
7/16-14 30 40.8 50 68.0 70 95.2
7/16-20 35 47.6 55 74.8 80 108.8
1/2-13 50 68.0 75 102.0 110 149.6
1/2-20 55 74.8 90 122.4 120 163.2
9/16-12 65 88.4 110 149.6 150 204.0
9/16-18 75 102.0 120 163.2 170 231.2
5/8-11 90 122.4 150 204.0 220 299.2
5/8-18 100 136 180 244.8 240 326.4
3/4-10 160 217.6 260 353.6 386 525.0
3/4-16 180 244.8 300 408.0
7/8-9 140 190.4 400 544.0 600 816.0
7/8-14 155 210.8 440 598.4 660 897.6
1-8 220 299.2 580 788.8 900 1,244.0
1-12 240 326.4 640 870.4 1,000 1,360.0

1. These torque values are to be used for all hardware
excluding: locknuts, self-tapping screws, thread forming
screws, sheet metal screws and socket head setscrews.

2. Recommended seating torque values for locknuts:

a. for prevailing torque locknuts - use 65% of grade 5

torques.

b. for flange whizlock nuts and screws - use 135% of

grade 5 torques.

3. Unless otherwise noted on assembly drawings, all torque
values must meet this specification.

No

Marks

SAE Grade 2 SAE Grade 5 SAE Grade 8

in/lbs in/lbs

19
20
27
31
66
76

2.1

2.3

3.1

3.5

7.6 8 10.9 12 16.3

8.6 10 13.6 14 19.0

30
31
43
49

NOTES

3.4

3.5

4.9

5.5

in/lbs

41
43
60
68

420 571.2

4.6

4.9

6.8

7.7

Wrench & Fastener Size Guide

1/4

1/4” Bolt or Nut

Wrench—7/16”

5/16

5/16” Bolt or Nut

Wrench—1/2”

3/8

3/8” Bolt or Nut

Wrench—9/16”

7/16
DIA.

7/16” Bolt or Nut

Wrench (Bolt)—5/8”

Wrench (Nut)—11/16”

1/2

DIA.

1/2” Bolt or Nut

Wrench—3/4”

Parts
Manual

IS5000Z Series

Zero-Turn Riding Mower

S/N: 1226 & Above (Tractor) 1210 & Above (Mower)

IT IS THE POLICY OF FERRIS INDUSTRIES TO IMPROVE ITS PRODUCTS WHENEVER IT
IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE
CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY
OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS MANUFACTURED

Briggs and Stratton Yard Power Products Group

5375 North Main Street
Munnsville, NY 13409 USA
800-933-6175

www.ferrisindustries.com

© Copyright Briggs and Stratton Corporation
All Rights Reserved. Printed In USA.

2007