Briggs & Stratton 30676, 30680, 030711-00 Operator's Manual

Not for
Reproduction
Outdoor Portable Generator
Operator’s Manual
Model Number _____________________________ Revision __________________________________ Serial Number ______________________________ Date Purchased ____________________________
BRIGGSandSTRATTON.COM
Manual No. 80015888 Revision -
Not for
Reproduction
Equipment Description
Table of Contents
Equipment Description.........................2
Features and Controls .........................4
Operation....................................6
Maintenance ................................11
Storage ....................................14
Troubleshooting/Specifications .................15
Warranty ...................................16
Register Your Product
To ensure prompt and complete warranty coverage, register your product online at www.onlineproductregistration.com.
Symbols and Meanings
Signal Meaning
DANGER
WARNING
CAUTION
NOTICE
Symbol Name Explanation
Indicates a hazard which, if not avoided, will result in death or serious injury.
Indicates a hazard which, if not avoided, could result in death or serious injury.
Indicates a hazard which, if not avoided, could result in minor or moderate injury.
Addresses practices not related to personal injury.
Safety Alert Symbol
Operator’s Manual
Toxic Fumes
Fire
Indicates a potential personal injury hazard.
Failure to follow warnings, instructions and operator’s manual could result in death or serious injury.
Engine exhaust contains carbon monoxide, a poisonous gas that could kill you in minutes. You cannot smell it or see it.
Fuel and its vapors are extremely flammable which could cause burns or fire resulting in death or serious injury.
Engine exhaust could cause fire resulting in death or serious injury.
WARNING! The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
WARNING! Certain components in this product and related accessories contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Wash hands after handling.
Equipment Description
Read this manual carefully and become familiar
with your outdoor generator. Know its applications, its limitations, and any hazards involved. Save these instructions for future reference.
The outdoor generator is an engine-driven, revolving field, alternating current (AC) generator equipped with a voltage regulator. The generator is designed to supply electrical power for operating compatible electrical lighting, appliances, tools and motor loads. The voltage regulator within the generator is designed to automatically maintain output voltage level.
The portable generator produces power that can be used for outdoor items using extension cords or for providing power to your travel trailer/recreational vehicle (RV). This portable
generator is not intended to restore power to a home. cords running directly into the home increase your risk of carbon monoxide poisoning through openings. Install carbon monoxide alarm(s).
Every effort has been made to ensure that the information in this manual is both accurate and current. However, the manufacturer reserves the right to change, alter or otherwise improve the generator and this documentation at any time without prior notice.
NOTICE If you have questions about intended use, contact an authorized service dealer. This equipment is designed to be used with Briggs & Stratton Power Products authorized parts only.
System Ground
The generator has a system ground that connects the generator frame components to the ground terminals on the AC output receptacles. The system ground is connected to the AC neutral wire (the neutral is bonded to the generator frame).
Special Requirements
There may be Federal or State regulations, local codes, or ordinances that apply to the intended use of the generator. Please consult a qualified electrician, the local agency having jurisdiction.
This generator is not intended to be used at a construction site or similar activity as defined by NFPA 70-2014 (NEC) section 590.6.
electrical inspector, or
Extension
Electric Shock
Hot Surface
2 BRIGGSandSTRATTON.COM
Generator could cause electrical shock resulting in death or serious injury.
Muffler could cause burns or resulting in serious injury.
Not for
Reproduction
Engine Identification Oil Fill Cap/Dipstick
Oil Drain Plug
Grounding Fastener
Equipment Description
Fuel Cap
Identification Label Spark Arrester Muffler Fuel Valve
Choke Lever Recoil Starter
Air Cleaner
Air Cleaner — Filters engine intake air. Choke Lever — Used when starting a cold engine. Engine Identification — Provides model, type and code of engine. Fuel Cap — Add unleaded fuel here. Fuel Valve — Used to turn fuel supply on and off to engine. Grounding Fastener — Consult your local agency having
jurisdiction for grounding requirements in your area.
Identification Label — Provides model and serial number of generator.
Oil Drain Plug — Drain engine oil here. Oil Fill Cap/Dipstick — Check and add engine oil here. Recoil Starter — Used to start the engine manually. Spark Arrester Muffler — Exhaust muffler lowers engine noise and
is equipped with a spark arrester screen.
3
Not for
Reproduction
Features and Controls
Compare the illustrations with your generator to familiarize yourself with the locations of various controls and product warnings.
Engine Switch
Circuit Breakers
202997
120 Volt AC, 30 Amp Travel Trailer Receptacle
Low Oil Shutdown
120 Volt AC, 20 Amp, Duplex Receptacle — Used to supply 120 Volt AC, single phase, 60 Hz power for electrical lighting, appliance, tool and motor loads.
120 Volt AC, 30 Amp Travel Trailer Receptacle — May be used to supply electrical power for the operation of 120 Volt AC, 30 Amp, single phase, 60 Hz electrical, travel trailer loads.
4 BRIGGSandSTRATTON.COM
120 Volt AC, 20 Amp Duplex Receptacle
Circuit Breakers (AC) — Push-to-reset circuit breakers are provided to protect the generator against electrical overload.
Engine Switch — Set this switch to on (I) before starting engine. Set switch to off (0) to shut off engine.
Low Oil Shutdown — This unit is equipped with a low oil protection device. Oil must be at proper level for engine to run. If the engine oil drops below a preset level, an oil switch will stop the engine. Check oil level with dipstick.
Not for
Reproduction
Features and Controls
Features and Controls
Muffler
Point away from home
5
Not for
Reproduction
Operation
Operation
Step 1: Safe Location
Before starting the portable generator there are two equally important safety concerns regarding carbon monoxide poisoning and fire that must be addressed.
Operation Location to Reduce the Risk of Carbon Monoxide Poisoning
The engine exhaust of all fossil fuel burning equipment, such as a portable generator, contains carbon monoxide, a poisonous gas that could kill you in minutes. You cannot smell it, see it, or taste it. Even if you do not smell exhaust fumes, you could still be exposed to carbon monoxide gas.
By law it is required in many states to have a carbon monoxide alarm in operating condition in your home. A carbon monoxide alarm is an electronic device that detects hazardous levels of carbon monoxide. When there is a buildup of carbon monoxide, the alarm will alert the occupants by flashing visual indicator light and alarm. Smoke alarms cannot detect carbon monoxide gas.
Carbon monoxide alarm
DANGER! Engine exhaust contains carbon monoxide, a poisonous gas that could kill you in
minutes. You cannot smell it, see it, or taste it. Even if you do not smell exhaust fumes, you could still be exposed to carbon monoxide gas.
• Operate this product only outdoors far away from windows, doors and vents to reduce the risk of carbon monoxide gas from accumulating and potentially being drawn towards occupied spaces.
• Install battery-operated carbon monoxide alarms or plug-in carbon monoxide alarms with battery back-up according to the manufacturer’s instructions. Smoke alarms cannot detect carbon monoxide gas.
• Do not run this product inside homes, garages, basements, crawlspaces, sheds, or other partially­enclosed spaces even if using fans or opening doors and windows for ventilation. Carbon monoxide can quickly build up in these spaces and can linger for hours, even after this product has shut off.
• Always place this product downwind and point the engine exhaust away from occupied spaces.
If you start to feel sick, dizzy, or weak while using this product, get to fresh air right away. See a doctor. You may have carbon monoxide poisoning.
USE OUTDOORS - AVOID CARBON MONOXIDE POISONING
MUFFLER
point away from home
CARBON MONOXIDE ALARM(S)
Install carbon monoxide alarms inside your home. Without working carbon monoxide alarms, you will not realize you are getting sick and dying from carbon monoxide poisoning.
6 BRIGGSandSTRATTON.COM
Not for
Reproduction
Operation
Operation Location to Reduce the Risk of Fire
WARNING!
combustibles, structures or damage fuel tank causing a fire, resulting in death or serious injury.
• Portable generator must be at least 5 ft. (1.5 m) from any structure, overhang, trees, windows, doors, any wall opening, shrubs, or vegetation over 12 in. (30.5 cm) in height.
Exhaust heat/gases could ignite
• Do not place portable generator under a deck or other type of structure that may confine airflow. Smoke alarm(s) must be installed and maintained indoors according to the manufacturer’s instructions/recommendations.
• Carbon monoxide alarms cannot detect smoke.
• Do not place portable generator in manner other than shown.
5 ft. (1.5 m) min.
5 ft. (1.5 m) min.
MUFFLER
7
Not for
Reproduction
Operation
Step 2: Oil and Fuel
Fuel must meet these requirements:
• Clean, fresh, unleaded fuel with a minimum of 87 octane.
• Gasoline with an ethanol content up to 10% is acceptable.
E10
NOTICE Do not mix oil in fuel or modify engine to run on alternate fuels. Use of unapproved fuels could damage engine and will not be covered under warranty.
See High Altitude for 5,000 ft. and above.
• Do not refuel during operation.
• Turn engine off and let it cool at least 2 minutes before removing fuel cap.
• Fill fuel tank outdoors. Keep fuel away from sparks, open flames, pilot lights, heat, and other ignition sources. Check fuel lines, tank, cap and fittings frequently for cracks or leaks. Replace if necessary.
1. Move generator outdoors to a flat, level surface.
2. Clean area around oil fill and remove oil fill cap/
3. Slowly pour contents of oil bottle into oil fill opening.
E15
WARNING! Fuel and its vapors are extremely
flammable which could cause burns or fire resulting in death or serious injury.
dipstick.
Checking oil level frequently, fill to point of overflowing.
7. Install fuel cap and let any spilled fuel evaporate before starting engine.
High Altitude
At altitudes over 5,000 ft. (1524 m), a minimum 85 octane fuel is acceptable. To remain emissions compliant, high altitude adjustment is required. Operation without this adjustment will cause decreased performance, increased fuel consumption,
See an authorized Briggs & Stratton dealer for high altitude adjustment information. Operation of the engine at altitudes below 2,500 ft. (762 m) with the high altitude kit is not recommended.
Transporting
When transporting equipment with a vehicle or trailer, turn fuel shutoff valve to off (0) position. Do not tip engine or equipment at an angle which causes fuel to spill.
and increased emissions.
Step 3: Generator Start Up
Disconnect all electrical loads from the generator. Use the following start instructions:
1. Make sure unit is outdoors on a level surface.
NOTICE Failure to operate the unit on a level surface may cause the unit to shut down.
2. Turn the fuel valve to the on (I) position.
Fuel Valve
NOTICE Pause to permit oil to settle. Wipe dipstick clean each time oil level is checked. DO NOT overfill.
4. Replace and fully tighten oil fill cap/dipstick.
5. Slowly remove fuel cap to relieve pressure in tank.
6. Slowly add unleaded fuel to fuel tank. Be careful not to fill above lip. This allows adequate space for fuel expansion.
3. Push choke lever to choke ( ) position.
Choke Lever
4. Set engine switch to on (I) position.
Engine Switch
5. Grasp recoil handle and pull slowly until slight resistance is felt. Then pull rapidly to start engine.
6. Slowly move choke lever to run ( ) position. If engine falters, move choke lever to half choke position until engine runs smoothly, and then to run ( ) position.
NOTICE If engine starts but fails to run, see Low Oil Shutdown in Features and Controls.
8 BRIGGSandSTRATTON.COM
Not for
Reproduction
Operation
Step 4: Connecting Electrical Loads
Using Extension Cords
Use only grounded extension cords marked for outdoor use rated for your loads. Follow cord safety instructions.
To Temporarily provide power
Total
Amperage
Up to 13A
Up to 15A
Up to 20A
Up to 30A
WARNING! Damaged or overloaded extension cords could overheat, arc, and burn resulting in death or serious injury.
using extension cords
Minimum Guage, Outdoor Rated
Up to 50 FT (15 M) Up to 100 FT (30 M)
16
14
12
10
14
12
10
8
120 Volt AC, 20 Amp, Duplex Receptacle
Use receptacle to operate 120 Volt AC, single-phase, 60 Hz electrical loads requiring up to 2,400 Watts (2.4 kW) at 20 Amps of current.
120 Volt AC, 30 Amp, Travel Trailer Receptacle
Use a NEMA TT–30 plug with this receptacle. Connect a 3–wire travel trailer cord set rated for 125 Volt AC loads at 30 Amps to the plug.
NEMA TT-30
Ground (Green)
NOTICE For generator output required see Generator Capacity. Connect electrical loads in off position then turn
on for operation.
Hot 120V
This receptacle powers 120 Volt AC, 60 Hz, single phase travel trailer loads requiring up to 3,500 watts (3.5 kW) of power at 29.1 Amps.
Neutral
9
Not for
Reproduction
Operation
Generator Capacity
To make sure your generator can supply enough running watts and starting watts for the items you will power at the same time, follow these simple steps:
1. Select the items you will power at the same time. See following list for typical wattages.
Tool or Appliance
Light Bulb - 75 Watt 75 ­Pump 800 1200
Refrigerator/Freezer 800 2000 Water Pump - 1/3 HP 1000 2000 Air Conditioner- 13,500 BTU 1200 1800 Furnace Fan Blower - 1/2 HP 800 1300 Microwave Oven - 1000 Watt 1000 ­Color Television - 42” 280 -
Personal Computer w/17” monitor 800 -
* Typical wattages listed are approximate only. Check tool
or appliance for actual wattage.
2. Total the running watts. This is the amount of power your generator must produce to keep your items running. See following example:
Example
Running
Watts*
Starting
Watts
Power Management
To manage generator power, sequentially add loads as follows:
1. With nothing connected to generator, start the engine outdoors.
2. Plug in and turn on the first load, preferably the largest load you have.
3. Permit the generator output to stabilize (engine runs smoothly and attached device operates properly).
4. Plug in and turn on the next load.
5. Again, permit the generator to stabilize.
6. Repeat steps 4 and 5 for each additional load.
Never add more loads than the generator capacity. Take special care to consider surge loads in generator capacity.
Step 6: Generator Shutdown
1. Turn off and unplug all electrical loads from generator panel receptacles. Never stop engine with electrical devices plugged in and turned on.
2. Let engine run at no-load for one minute to stabilize internal temperatures of engine and generator.
3. Push engine switch to off (0) position.
4. Move fuel valve to off (0) position.
Tool or Appliance
Air Conditioner
Refrigerator 800 2000 Television 280 — Light (75 Watts) 75
Total running watts = 2355 Highest starting watts = 2000 Total generator watts required = 4355
3. Estimate the starting watts you will need. Because not all motors start at the same time, total starting watts can be estimated by adding only the item with the highest additional starting watts requirements to the total running watts from step 2.
Running Watts Starting Watts
1200 1800
2355 Total
Running Watts
2000 Highest
Starting Watts
10 BRIGGSandSTRATTON.COM
Loading...
+ 22 hidden pages