Page 1
B rie n z a
by I TALI A
INSTALLATION
TOOLS:
Adjustable Wrench
Pliers
Pipe Wrench
Screwdriver
Teflon Tape
Moncalieri
Vessel Sink Filler Faucet
BRN-MCRVF
BRN-MCRVFD
Shut off water supplies. Remove old faucet. Clean
sink/counter surface in preparation for new faucet
Screw the mounting stud into the body. Secure the
faucet to sink/counter by installing steel washer and
nut. Tighten with wrench.
Place flange on bottom of new faucet, the position
faucet through mounting hole.
Apply pipe tape onto threads of water supplies. Use
wrench when tightening the hose connection. Do not
overtighten.
IMPORTANT: After installation is complete, remove
aerator and turn on water supply and allow both hot
and cold water to run for at least one minute each.
While water is running check for leaks; make
adjustments if necessary. Reinstall aerator. Your new
faucet is now ready for use.
MAINTENANCE:
Your new vessel sink faucet is desgined for years of trouble-free
performance. Keep it looking new by cleaning it periodically with a soft
cloth. Avoid abrasive cleaners, steel wool and harsh chemicals as these
will dull the finish and void your waranty.
ITALIA FAUCETS, INC.| 877-ITALIA-2 (877-482-5422) | [email protected]
Page 2
B rie n za
by I TALI A
Moncalieri
SINGLE HANDLE 1-HOLE MOUNT VESSEL SINK FAUCET
LIMITED LIFETIME WARRANTY
Italia Faucets, Inc. warrants to the original purchaser that their
products will be free from defects in workmanship and materials. All
Italia faucets are provided with a limited lifetime warranty. This
warranty does not cover any other labor or service charges
associated with the removal, repair, or reinstallation of Italia Faucets
products. This express warranty does not apply to products that have
been damaged as a result of misuse, abuse, negligence, accident,
faulty installation or maintenance practices and/or used in any
manner contrary to those recommened by the manufacturer.
© 201 5 I T A L I A F A U C E T S , I N C .
Loading...