Breville VCF011 Quick Start Quide

FRONT

quick start

Initial Cleaning

*It is important to clean the product before

using for the first time and after each use.

step 1: fill with water step 2: turn on

If the water tank
is empty fill with
300ml of water,
making sure the
cap is tightly
closed.

Plug in and
switch on.
The orange
Power On light
will illuminate
followed by
the green light
when ready
to use.

step 3: flush with water step 4: clean

Fill the milk
tank with water.

Place the
Cleaning jug on
the drip tray.

CLEAN
WATER

It is important
to do this the
first time and
after each use

CLEAN GO!

STOP

Turn the dial
anti-clockwise to
CLEAN/GO.

When all the
water has flushed
through the Instant
Cappuccino, turn
the dial to STOP.

Instant Cappuccino is now ready
to use. Please follow the making
a cappuccino instructions on the
reverse of this card...

Milk and instant
coffee granules

left in the machine

will damage

the internal

mechanism.

!

IMPORTANT!

Always follow the

cleaning instructions

BACK

92833-0

VCF011_QSG_Iss_1 02/09

quick start

Making Cappuccino

step 5: add ingredients-------------------------

step 6: start

step 7: stop

Milk and instant
coffee granules

left in the machine

will damage

the internal
mechanism

!

IMPORTANT!

Always follow the

cleaning instructions

Add instant
coffee. Only
add enough
coffee to brew
ONE cup at a
time.
Close the coffee
chamber cover by
turning the control
dial towards
STOP.

Turn the dial to
CLEAN/GO and
your cappuccino
maker will start
to dispense
cappuccino

CLEAN GO!

STOP

CLEAN GO!

STOP

When the cup is
full, turn the dial
to STOP

When the
green light
illuminates, Instant
Cappuccino
is ready to make the
next drink
Add other shot of
instant coffee.

Open the coffee
chamber cover by
pushing the dial
locking button and
turning the control
dial towards the
INSTANT COFFEE
position. Make sure
that the coffee
funnel dispenser
is in place.

If the water tank
is empty fill with
300ml of water,
making sure the
cap is tightly
closed.

dial

locking

button

Fill the milk tank
with milk up to
the level required
(number of mugs
/cups).

Plug in and
switch on.

It is ready to use
when the green
light illuminates.

Place a mug or
cup under the
nozzle

It is important to clean after use.