Breville VBL067 Instruction Manual
™
pick and mix
glass blender
®
2
product safety
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children without
supervision.
Always disconnect the appliance from the mains supply socket
if it is left unattended and before assembling, disassembling or
cleaning.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualied persons in
order to avoid a hazard.
! Never use this appliance for anything other than its intended use. This appliance is for
household use only. Do not use this appliance outdoors.
! Always ensure that hands are dry before handling the plug or switching on the
appliance.
! Always use the appliance on a stable, secure, dry and level surface.
! This appliance must not be placed on or near any potentially hot surfaces (such as a
gas or electric hob).
! Never immerse any part of the appliance or power cord and plug in water or any other
liquid.
! Never let the power cord hang over the edge of a work top, touch hot surfaces or
become knotted, trapped or pinched.
! Do not use the appliance if it has been dropped or if there are any visible signs of
damage.
! Never use any accessory or attachment not recommended by the manufacturer.
! Make sure that all attachments are securely and correctly tted before operating the
appliance.
! The blades and cutting accessories have very sharp edges. Take care when handling
or cleaning them.
! Allow moving parts to come to a stop before changing or cleaning accessories.
! Never process hot or boiling liquids. Allow them to cool before processing.
3
• Motor unit
• Jug
• Lid
• Stopper
Ensure that the appliance is switched off and unplugged from the supply socket
if it is left unattended and before assembling, disassembling or cleaning.
The blades have very sharp edges. Take care when handling or cleaning them.
Never immerse any part of the appliance or power cord and plug in water or any
other liquid.
Never use harsh, abrasive or caustic cleaners to clean this appliance.
1. Remove your blender carefully from the packaging. You may wish to store the
packaging for future use.
2. Check the contents:
3. Wash all parts that will come into contact with food. Use warm soapy water then rinse
and dry thoroughly.
4. Using a mild detergent solution, wipe the motor unit with a damp cloth. Dry
thoroughly.
before using your blender
4
features
1 Stopper
Removable stopper allows you to add ingredients whilst continuing to blend
2 Jug lid
3 Glass jug
4 Base unit
5 Speed control
Illuminated speed control with two speeds plus ice crush
6 Pulse button
The Pulse button allows precise control of the duration and speed of blending. Press
and hold the pulse button to start processing, and release it to stop.
5
Due to our policy of continuous improvement, the actual product may differ slightly from the one illustrated in these instructions.
6
using your blender
Make sure the unit is switched off and unplugged from the mains supply socket
before assembly.
Make sure that the speed control is set to the off (0) position before plugging your
blender in to the mains supply.
Never place your ngers inside the jug during operation or when adding
ingredients.
1. Place the jug onto the base by lining up the recesses on the jug with the lugs on the
base. Make sure that the jug is seated squarely and securely on the base.
2. Add the ingredients to the blending jug. Don’t overll the jug.
3. Fit the lid onto the jug. Make sure that the spout cover on the lid aligns with the spout
on the jug. Push down until the lid is securely tted.
4. Fit the stopper. Line up the lugs on the stopper with the slots in the lid.Push the
stopper down and twist it clockwise to lock it into position.
5. During processing, further ingredients can be added by twisting and removing the
stopper in the lid. Ret the stopper after adding any ingredients.
Blending
Do not operate your blender continuously for more than one minute without
giving it a rest period of two minutes.
Place one hand on top of the lid to steady your blender during processing.
To start blending, set the speed control to 1. To blend at a higher speed, set the speed
control to 2.
Alternatively, blend food using the pulse button. Set the speed control to the off (0)
position then blend in short bursts by pressing and releasing the pulse button.
During blending the stopper can be removed to feed ingredients into the jug.
Using your blender to crush ice
For best results defrost ice cubes slightly before crushing. To crush home made (small)
ice cubes ll the jug to 750ml and add 200ml water. To crush shop-bought (large) ice
cubes add 15 ice cubes to the blender jug and add 200ml of water.
1. Place the ice cubes and water inside the jug.
2. Fit the lid and stopper. Set the speed control to the off (0) position before plugging the
blender in to the mains supply.
3. Blend in short bursts by holding then releasing the speed control in the ICE CRUSH
position.
Loading...