Breville the Skillet TF20 Instruction Booklet

www.breville.com.au
Breville is a registered trademark of Breville Pty. Ltd. A.B.N. 98 000 092 928.
Copyright Breville Pty. Ltd. 2010.
Due to continued product improvement, the products illustrated/photographed
in this booklet may vary slightly from the actual product.
TF20 Issue - A10
Breville Customer Service Centre
Botany NSW 2019 AUSTRALIA
Phone: 1300 139 798 Fax: (02) 9384 9601 Email:
Customer Service:
askus@breville.com.au
New Zealand Customers Mail: Private Bag 94411
Botany Manukau 2163 Auckland NEW ZEALAND
Phone:
0800 273 845
Fax: 0800 288 513 Email:
Customer Service:
askus@breville.com.au
TF20
the Skillet
Instruction Booklet
CONGRATULATIONS
on the purchase of your new
Breville Skillet
3
CONTENTS
4 Breville recommends safety first
6 Know your
Breville Skillet
8 Operating your
Breville Skillet
10 Care & cleaning for your
Breville Skillet
14 Cooking techniques
18 Recipes
4
BREVILLE RECOMMENDS SAFETY FIRST
At Breville we are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions.
READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE REFERENCE
Carefully read all instructions before
operation and save for future reference.
Remove and safely discard any
packaging material and promotional stickers before using the frypan for the first time.
To eliminate a choking hazard for young
children, remove and safely discard the protective cover that is fitted to the power plug of the frypan.
Do not place the frypan near the edge
of a bench or table during operation. Ensure that the surface is level, clean and free of water.
Keep the frypan clear of walls, curtains
and other heat or steam sensitive materials. Minimum 200mm distance.
Do not place on or near a gas
burner, electric element or in or near a heated oven.
Do not use on a sink drain board.
Always insert Temperature Control Probe
into probe socket before inserting power plug into power outlet and switching on appliance. Ensure the probe socket is completely dry before inserting the Temperature Control Probe.
The frypan must be used with the
Temperature Control Probe provided. Do not use any other probe or connector.
To protect against electric shock, do not
immerse power cord or Temperature Control Probe in water or any other liquid, or allow moisture to come in contact with these parts.
Ensure the Temperature Control
Probe has cooled before removing from the appliance.
Always remove Temperature Control
Probe before cleaning the appliance.
If using plastic utensils, do not leave in
frypan when hot.
Do not place hot glass lid under cold
water.
Always have the glass lid positioned
correctly on the frypan throughout operation of the appliance unless stated in the recipe to have it removed.
The glass lid has been specially treated
to make it stronger, more durable and safer than ordinary glass, however it is not unbreakable. If struck extremely hard, it may break or weaken and could at a later date shatter into many small pieces without apparent cause.
Extreme caution must be used when
the appliance contains hot oil or other liquid. Do not move the appliance during cooking. Allow the frypan to cool before removing oil or other liquid.
Do not touch hot surfaces. Use the
handles for lifting and carrying the frypan.
Do not leave the appliance unattended
when in use.
IMPORTANT SAFEGUARDS
5
BREVILLE RECOMMENDS SAFETY FIRST
5
The appliance is not intended to be
operated by means of an external timer or a separate remote control system.
Always turn the Temperature Control
Probe to ‘MIN’, then switch off at the power outlet and allow probe to cool, then remove probe and unplug, if appliance is to be left unattended, if not in use before attempting to move appliance and before cleaning.
Keep the appliance clean. Refer to care
and cleaning (page 10).
Do not place anything on top of the
frypan when the lid is in position, when in use and when stored.
IMPORTANT SAFEGUARDS FOR ALL ELECTRICAL APPLIANCES
Fully unwind the power cord before use.
Do not let the power cord hang over
the edge of a bench or table, touch hot surfaces or become knotted.
To protect against electric shock do not
immerse the power cord, power plug or appliance in water or any other liquid.
The appliance is not intended for use
by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure
that they do not play with the appliance.
It is recommended to regularly inspect
the appliance. To avoid a hazard do not use the appliance if power cord, power plug, temperature control probe, or appliance becomes damaged in any way. Return the entire appliance to the nearest authorised Breville Service Centre for examination and/or repair.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Any maintenance other than cleaning
should be performed at an authorised Breville Service Centre.
This appliance is for household use only.
Do not use this appliance for anything other than its intended use. Do not use in moving vehicles or boats. Do not use outdoors. Misuse may cause injury.
The installation of a residual current
device (safety switch is recommended to provide additional safety protection when using electrical appliances. It is advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit supplying the appliance. See your electrician for professional advice.
WARNING
Do not operate the frypan on an inclined surface. Do not move the frypan while it is switched on.
SAVE THESE INSTRUCTIONS
KNOW
your Breville Skillet
7
KNOW YOUR BREVILLE SKILLET
A. 24cm skillet B. Premium non-stick
cooking surface
C. Powerful 1100W die-cast element
D. Toughened glass lid E. Cool-touch handle F. Temperature control probe
with 10 heat settings
C
F
ED
A B
Loading...
+ 16 hidden pages