Breville the Kinetix BBL800 Instruction Booklet

BBL800

the Kinetix® Pro Blender

Instruction Booklet

CONGRATULATIONS

on the purchase of your new

Breville product

3

CONTENTS

4 Breville recommends safety first

6 Know your Breville product

8 Assembling your Breville product

10 Operating your Breville product

13 Disassembling your

Breville product

15 Care & cleaning

20 Troubleshooting

22 Recipes

4

BREVILLE RECOMMENDS SAFETY FIRST

At Breville we are very safety conscious. We design and manufacture consumer products with
the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise
a degree of care when using any electrical appliance and adhere to the following precautions.

READ ALL INSTRUCTIONS
BEFORE USE AND SAVE FOR
FUTURE REFERENCE

• Remove any packaging material and

promotional labels before using the
Kinetix® Pro Blender for the first time.

• To eliminate a choking hazard to young

children, remove and safely discard the
protective cover fitted to the power plug
of the appliance.

• Do not place the Kinetix® Pro Blenderg

operation. Ensure that the surface is
level, clean and free of water, flour and
other substances. Vibration during
operation may cause the appliance to
move.

• Do not place the Kinetix® Pro Blender

on or near a hot gas or electric burner, or
where it could touch a heated oven.

• Do not use the Kinetix® Pro Blender on

uneven metal surfaces for example, a
sink drain board.

• Always ensure the Kinetix® Pro Blender

is properly assembled before use. Refer
to Assembling your Breville Blender.

• Use only the blender jug and lid

supplied with the Kinetix® Pro Blender.

• Always ensure the blender lid is firmly

positioned on the blender jug before
operating.

• Do not leave the Kinetix® Pro Blender

unattended when in use.

• Always ensure the Kinetix® Pro Blender

is turned off by pressing the POWER
button on the control panel. Then
switch the appliance off at the power
outlet and unplug the cord. Make sure
the motor and blades have completely
stopped before attempting to move the
appliance, or when the Blender is not in
use and before disassembling, cleaning
and storing.

• If food becomes lodged around the

blending blade, turn the Kinetix® Pro
Blender off by pressing the POWER
button on the control panel. Then switch
the appliance off at the power outlet
and unplug the cord. Make sure the
motor and blades have stopped before
removing the jug from the motor base.
Use a spatula to dislodge or stir the food
before continuing. Do not use fingers as
the blades are sharp.

• Keep hands, fingers, hair, clothing, as

well as spatulas and other utensils away
from the blender jug during operation.
Never place your fingers, hands or
utensils inside the blender jug without
unplugging the appliance from the
power outlet.

• In the unlikely event of an excessive

load, the blender is equipped with
electronic protection which will safely
shut down the unit. If this occurs, unplug
the blender and allow it to rest for 30
minutes. None of the recipes in this
instruction book are considered a
heavy load.

IMPORTANT SAFEGUARDS

5

BREVILLE RECOMMENDS SAFETY FIRST

5

• Be careful when handling the blending

blade assembly as the blades are very
sharp. Be careful when emptying
the blender jug and during cleaning.
Mishandling of the blades may cause
injury.

• Do not remove the blender jug from the

motor base whilst in operation.

• Do not use the Kinetix® Pro Ble

n

der
for anything other than food and/or
beverage preparation.

• Do not operate the Kinetix® Pro Ble

n

der
without food or liquid in
the blender jug.

• Do not process hot or boiling liquids.

Allow to cool before placing into the
blender jug.

• Do not subject the blender jug to

extremes of hot or cold, for example
placing a cold jug in hot water or vice
versa.

• Always visually inspect the blade

assembly before each use. If the
blades appear bent or damaged, or
if discoloration of the plastics noted,
please contact your Breville service
centre.

• Keep the appliance clean. Refer to care

and cleaning.

• The motor is protected from burning

out by an automatic, temperature
operated, cut-out switch. If the blender
is overloaded or operated continuously
for too long, the motor may overheat. If
this happens, the buttons will start to
flash and the safety cut-out switch will
prevent the blender from operating. To
operate the blender again, you must
switch off at the power outlet, unplug
and allow to cool for approximately
30 minutes. Once the motor has fully
cooled, it is ready for use again.

IMPORTANT SAFEGUARDS FOR
ALL ELECTRICAL APPLIANCES

• Fully unwind the power cord before use.

• Do not let the power cord hang over

the edge of a bench or table, touch hot
surfaces or become knotted.

• To protect against electric shock do not

immerse the power cord, power plug or
appliance in water or any other liquid.

• The appliance is not intended for use

by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning
use of the appliance by a person
responsible for their safety.

• Children should be supervised to ensure

that they do not play with the appliance.

• It is recommended to regularly inspect

the appliance. To avoid a hazard do not
use the appliance if power cord, power
plug or appliance becomes damaged in
any way. Return the entire appliance to
the nearest authorised Breville Service
Centre for examination and/or repair.

• Any maintenance other than cleaning

should be performed at an authorised
Breville Service Centre.

• This appliance is for household use only.

Do not use this appliance for anything
other than its intended use. Do not use
in moving vehicles or boats. Do not use
outdoors. Misuse may cause injury.

• The installation of a residual current

device (safety switch is recommended
to provide additional safety protection
when using electrical appliances. It
is advisable that a safety switch with
a rated residual operating current
not exceeding 30mA be installed in
the electrical circuit supplying the
appliance. See your electrician for
professional advice.

SAVE THESE
INSTRUCTIONS

KNOW

your Breville product

7

KNOW YOUR BREVILLE PRODUCT

A. Easy One Finger Removal

Breville Assist™ Lid for easy handling.

B. Light Weight Jug

2 litre jug is remarkably strong
and lightweight.

C. Dishwasher Safe

The one-piece blade is ergonomically
designed for ease of cleaning. Both jug
and blade are dishwasher safe.

B

A

C

D

E

D. Premium Materials

Stainless steel and die-cast
construction for durability.

E. Intelligent engineering

Powerful 2000 watt motor and
highly efficient blades results in quiet
operation.

Surgical Grade Stainless Steel Blades

To ensure the blades stay sharp longer they
are made from surgical grade stainless steel.
The central blades are serrated for extra
cutting performance.

Blade removal

The one piece blade removal system is
ergonomically designed for ease of cleaning.

ASSEMBLING

your Breville product

9

ASSEMBLING YOUR BREVILLE PRODUCT

BEFORE FIRST USE

Before using your Breville product for
the first time, remove any packaging
material and promotional labels. Ensure the
appliance is switched off at the power outlet
and the power cord is unplugged.

Wash the lid, inner lid, blender jug and
blade assembly (refer to Disassembling the
blender) of the Breville product in warm,
soapy water with a soft cloth. Rinse and dry
thoroughly. The motor base can be wiped
with a damp cloth. Dry thoroughly.

The lid, inner lid, blade assembly and silicon
seal may be washed in the dishwasher in the
top shelf only on a standard wash.
The blender jug may be placed in the
bottom shelf.

NOTE

Ensure that the silicon seal is carefully
placed completely around the blade
assembly, prior to inserting into the
jug, as this will prevent leakages.

1. To assemble the blender jug, place the

silicon seal onto the blade assembly

2. Upturn the blender jug and insert the

blade assembly into the jug base.

3. Turn the blade removal system

anticlockwise until firmly screwed into
position.

4. Place the motor base on a flat, dry

surface such as a bench top. Ensure
that the motor base is switched off at
the power outlet and the power cord
is unplugged. Turn the blender jug
upright and insert onto the motor base.
The handle of the blender jug can be
positioned to the left or right hand side
of the appliance.

5. Plug the power cord into a 230/240v

power outlet and switch on.

OPERATING

your Breville product

11

OPERATING YOUR BREVILLE PRODUCT

1. To turn the blender on press the

POWER button on the far left of the
control panel. The POWER button
will illuminate and flash indicating
the blender is powered on. When the
jug is placed on the base all lights will
illuminate signalling the blender is
ready for use.

NOTE

When using your for the first time,
you may notice an odour coming from
the motor. This is normal and will
dissipate with use.

2. Add food or liquid into the blender jug

ensuring not to exceed the MAX mark.

3. Place the blender lid firmly into position

on the top of the blender jug. If not
already in place, insert the clear inner lid
into the blender lid and turn clockwise
or anticlockwise to lock into position.

NOTE

When the blender jug is filled at or
near the MAX line, place one hand on
the blender lid to avoid displacement
of the lid during operation. Do not
blend hot ingredients, allow to cool
before placing into the blender jug.

4. The Blender features a Breville Assist

Lid™ for easy handling. This allows the
lid to fit tightly onto the blender jug,
avoiding displacement during operation.
The ring pull design allows the user
to easily remove the lid with a simple
leverage action.

5. Select the required function (BLEND,

SMOOTHIE or ICE/AUTO PULSE) by
pressing the corresponding function
button. The blender will start to operate
and only the selected function button
will illuminate. The POWER button
will continue to flash. The speed can be
changed at any time during the blending
process. Each time a new function
is selected its button will illuminate
and the previous function button
illumination will go out.

6. For ice-crushing or ingredients that

require short bursts of power, select the
ICE/AUTO PULSE button. The blender
will start to operate and the ICE/AUTO
PULSE button will illuminate. The
POWER button will continue to flash.
The pre-programmed functions have
been designed to run for a specific time.
To operate these functions simply press
desired function button once only and
release — automatically preprogrammed
function will begin.