Breville CITRUS PRESS Service Manual

Breville Customer Service Center

CITRUS PRESS

Model 800CPXL

Issue 1/05

US Customers

Mail: 2851 E. Las Hermanas

Street Rancho Dominguez CA 90221-5507

Phone: Customer Service:

1(866) BREVILLE

Email Customer Service

askus@brevilleUSA.com

Canada Customers

Mail: Anglo Canadian

2555, Avenue l’aviation Pointe-Claire (Montreal) Quebec H9P 2Z2

Phone: Customer Service:

1(866) BREVILLE

Email Customer Service

askus@breville.ca

www.brevilleusa.com www.breville.com

2851 E. Las Hermanas Street, Rancho Dominguez, CA 90221-5507 USA Tel 1866 BREVILLE 2555, Avenue Aviation, Pointe-Claire (Montreal)Quebec, H9P 2Z2 CANADA Tel 1866 BREVILLE

one illustrated in this booklet.

is a registered trademark of Breville Pty Ltd. A.B.N. 98 000 092 928

CONTENTS

4 Congratulations

5 About your Breville Die Cast Series™ Citrus Press

6 Breville recommends safety first

8 Know your Breville Die Cast Series™ Citrus Press

9 Assembling your Breville Die Cast Series™ Citrus Press

1 3 Operating your Breville Die Cast Series™ Press

CITRUS PRESS

1 6 Disassembling your Breville Die Cast Series™ Citrus Press

1 9 Care and cleaning

2 0 Trouble shooting guide

2 1 Tips on juicing

Congratulations

on the purchase of your new Breville Die Cast Series™ Citrus Press

From its superbly crafted and ultra-quiet motor right through to its professionally styled casing, your Die Class Series Citrus Press represents a perfect balance of functionality, reliability and absolute style.

In developing this booklet our goal was to provide you with the perfect point from which you can start exploring the fabulous benefits of the innovative 800CPXL. We hope each page of this booklet helps you gain enormous pleasure from a new world of fresh citrus juicing.

We would just like to say thank you and…

enjoy.

BREVILLE RECOMMENDS SAFETY FIRST

IMPORTANT SAFEGUARDS

We at Breville are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer foremost in mind. In addition we ask that you exercise a degree of care when using any electrical appliance and adhere to the

• Carefully read all instructions before

operating and save for future reference.

• Remove any promotional stickers before

using the Citrus Press.

• Always make sure the Die cast Series

Citrus Press is properly and completely assembled before connecting to power outlet and operating. The unit will not turn ‘ON’ unless properly assembled.

• Always use the Die Cast Series Citrus

Press on a dry, level surface.

• Always switch the Die Cast Series Citrus

Press ‘OFF’, then unplug from the power outlet if the appliance - is to be left unattended, - if not in use, - before cleaning, - before attempting to move the appliance, disassembling, assembling and when storing the appliance.

• Regularly inspect the supply cord, plug

and actual appliance for any damage. If found damaged in any way, immediately cease use of the appliance and call Breville Customer Service at 1-866BREVILLE.

• The use of accessory attachments not

recommended by Breville may cause a risk of injury to persons, fire or electric shock.

• When using this appliance, provide

adequate air space above and on all sides for circulation.

• If the appliance is of the grounded type,

the extension cord should be a grounded type and its electrical rating must be the same or more wattage as the appliance.

• To protect against fire, electrical shock

and injury to persons do not immerse the appliance, motor base, cord or plug in water or any other liquid. Do not use a water jet to clean the power cord or motor base.

• Do not leave the appliance unattended

when in use.

• Close supervision if necessary when any

appliance is used by or near children.

SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE

• Do not let the cord hang over the edge

of a table or counter, or touch hot surfaces or become knotted.

• Do not place this appliance on or near a

hot gas or electric burner, or where it could touch a heated oven.

• For any maintenance other than cleaning,

call Breville Customer Service at 1-866BREVILLE.

• Do not use this appliance for anything

other than its intended use. Do not use in moving vehicles or boats. Do not use outdoors.

• Strictly follow cleaning and care

instructions.

• To disconnect, turn all controls to ‘OFF’,

then remove plug from power outlet.

• Use caution when operating the

appliance – do not place hands or fingers near moving or rotating parts.

WARNING: AVOID PLACING HANDS OR FINGERS NEAR JUICING PRESS ARM MECHANISM AT REAR OF

MOTOR BASE WHEN MOVING JUICING PRESS ARM INTO THE UPRIGHT POSITION

• Portable – Unplug from outlet when not

in use before putting on or taking off parts. Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or is dropped or damaged in any manner. Return appliance to the nearest authorized service center/facility for examination, repair, electrical or mechanical adjustment.

• Avoid contact with moving parts.

ELECTRIC CORD STATEMENT Your Die Cast Series Citrus Press has a short cord as a safety precaution to prevent personal injury or property damage resulting from pulling, tripping or becoming entangled with the cord. Do not allow children to be near or use this appliance without close adult supervision. If you must use a longer cord or an extension cord when using the appliance, the cord must be arranged so it will not drape or hang over the edge of a countertop, tabletop or surface area where it can be pulled on by young children or tripped over. To prevent electric shock, personal injury or fire, the electrical rating of the extension cord if you must use one must be the same or more than the wattage of the appliance (wattage is marked on the underside of the appliance).

BREVILLE RECOMMENDS SAFETY FIRST

KNOW YOUR BREVILLE DIE CAST SERIES™ CITRUS PRESS

ASSEMBLING YOUR BREVILLE DIE CAST SERIES™ CITRUS PRESS

Juicing Press Arm

patented juicing action ensures the

Fruit Dome comes straight down over

the fruit and swings back for easy access. Makes juicing and cleaning

Dust cover

for hassle-free storage

(not shown in picture)

2 Stainless Steel Filters

(dishwasher safe) allow the juice

to flow through while straining the

pulp and seeds. Control the amount of

pulp

in your juice by selecting either the

Powerful Motor

automatically starts when pressure

is applied to the Juicing Cone

Illuminated “ON/OFF” Button

Cord Storage

wraps around and clips into position

under Motor Base (not shown in

Soft Grip Handle

makes juicing easy

Fruit Dome

(dishwasher safe) is easily removed for cleaning

Die Cast Stainless Steel Juicing Cone

(dishwasher safe) extracts the maximum juice from all sized citrus

Juice Collector

(dishwasher safe) collects the juice to flow out the Juice Spout

Juice Spout

opens all the way for cleaning with anti-drip stop function

Double Stage Switching System

juicer will NOT operate unless it is correctly assembled for safety and performance

Step 1. Pull the Juicer Press Arm up and backwards, away from the Motor Base, until fully extended.

Step 2. Place the Juice Collector onto the Drive Shaft on top of the Motor Base. Ensure the Juice Spout fits into the semi-circular groove at the front of the Motor Base.

Step 3. Insert the selected Stainless Steel Filter (fine or coarse) into the Juice Collector, aligning the indent with arrow in the bottom of the Filter over the corresponding tab with arrow in the Juice Collector. Use the Coarse Filter for maximum pulp content in the juice and

KNOW YOUR BREVILLE DIE CAST SERIES CITRUS PRESS

ASSEMBLING YOUR BREVILLE DIE CAST SERIES CITRUS PRESS

the Fine Filter to decrease the pulp content in the juice.

Step 4.

Place the Juicing Cone onto the Drive Shaft and press down lightly to lock the Cone into position.

Step 5. Insert the Fruit Dome onto the underside of the Juicing Press Arm by aligning the tab on top of the Fruit Dome with the hole in the Juicing Press Arm. Hold onto the Juicing Press Arm and press the Fruit Dome up and backwards until the Dome locks into position.

Note: The Fruit Dome is keyed,

and can only be inserted in one way (this will ensure that it does not rotate

Step 6. Ensure the Anti-drip Juice Spout is pushed down into the pouring position.

Step 7. Place a suitable sized glass or jug underneath the Juice Spout.

ASSEMBLING YOUR BREVILLE DIE CAST SERIES CITRUS PRESS

OPERATING YOUR BREVILLE DIE CAST SERIES™ CITRUS PRESS

Operating

Step 1. Ensure the Die Cast Series Citrus Press is correctly assembled with a glass or jug, placed under the Juice Spout before juicing commences.

Step 2. Cut the citrus fruit in half by cutting across the fruit segments, rather than across the tip ends, to ensure more efficient juicing.

For the best contact with the Fruit Dome, smooth the outside of the fruit by trimming any knobbly tip ends such as the ends of a lemon or tangelo.

Step 3. Plug the power cord into a 120v power outlet and then switch the On/Off button to ON. This begins operation of the Citrus Press.

OPERATING YOUR BREVILLE DIE CAST SERIES CITRUS PRESS

NOTE:The Stainless Steel Filter

should be emptied when full with pulp and seeds. The Filter can be emptied during juicing by switching the Citrus Press “OFF” at the On/Off button and carefully removing the Juicing Cone and Filter. Clean and replace Stainless Steel Filter and Juicing Cone before continuing to juice.

Do not allow the Stainless Steel Filter to overfill as this may prevent correct operation or damage the

Step 4. Place a citrus fruit half, cut side down, onto the Juice Cone.

Step 5. Grasp the Soft Grip Handle and slowly lower the Juicing Press Arm and press down firmly until the Fruit Dome is in contact with the fruit skin. The motor will automatically start and the Juicing Cone will begin to rotate. The juice will be extracted from the fruit and flow through the Juice Spout into the glass. The pulp and seeds will collect in the Stainless Steel

Filter.

Step 6. The Die Cast Series Citrus Press juices very quickly so each fruit half will be juiced in a few seconds. To automatically stop the motor, lift the Juicing Press Arm up and backwards to its extended position.

Step 7. Remove the used fruit from the Juicing Cone. Empty excess pulp and seeds from Stainless Steel Filter as required.

Repeat Steps 4-7 to continue juicing.

OPERATING YOUR BREVILLE DIE CAST SERIES CITRUS PRESSOPERATING YOUR BREVILLE DIE CAST SERIES CITRUS PRESS

DISASSEMBLING YOUR BREVILLE DIE CAST SERIES™ CITRUS PRESS

Step 1. Switch the Citrus Press “OFF” at the On/Off button and unplug the unit from the power outlet.

DISASSEMBLING YOUR BREVILLE DIE CAST SERIES CITRUS PRESS

Step 2.1 Pull the Juicing Press Arm up and backwards, away from the Motor Base, until fully extended.

Step 2.2 Close the anti drip spout by pulling to upper position.

Step 3. Remove the Fruit Dome by pressing the button marked “PRESS” on the Juicing Press Arm.

Step 4. Lift the Juice Collector from the Motor Body with the Stainless Steel Filter and Juicing Cone still in place. Remove the Cone and Filter from the Juice Collector over a sink for easier cleaning.

Step 5. Follow recommended Care and Cleaning guidelines and insert the Dust Cover before storing.

DISASSEMBLING YOUR BREVILLE DIE CAST SERIES CITRUS PRESS

CARE, CLEANING AND STORAGE

• Always ensure that the Die Cast Series Citrus Press is switched OFF at the On/Off button and the plug is removed from the power outlet before cleaning, disassembling, assembling and storing the appliance.

• Follow these instructions to clean all surfaces or parts that come into contact with food during juicing:-

1. For easy cleaning – immediately after each use rinse removable parts under warm water to remove wet pulp. Allow parts to air dry before reassembling.

2. For thorough cleaning - after disassembling the appliance, all removable parts should be washed in hot soapy water or on the top shelf of the dishwasher. The Motor Base and Juicing Press Arm should be wiped with a soft, damp cloth. All parts should be dried thoroughly before reassembling.

• Store the cleaned and reassembled Citrus Press in an upright position in a cool, dry place. Never place any items on top of the Citrus Press.

NOTE:Rinse or wash all

removable parts immediately after use. Dried citrus pulp is difficult to remove and may stain. If any staining does occur, wipe the affected part/s with undiluted dishwashing

NOTE:Do not soak the Stainless

Steel Filters or other removable parts in bleach.

Never immerse the motor base in water or any other liquid.

Cleaning

CARE AND CLEANING

TROUBLE SHOOTING GUIDE

TIPS ON JUICING

POSSIBLE PROBLEM EASY SOLUTION

Machine will not work Switch not ‘On’

Arm not lowered

Cone or Dome not assembled properly

THE INSIDE INFORMATION ON JUICE Although juice drinks are usually developed with flavor, texture and aroma at the forefront, the health benefits certainly add to the pleasurable taste experience.

95% of the nutrient content of fruit and vegetables is found in the juice. Liquids are an important part of a well balanced diet. Fresh juice is an easy source of vitamins and minerals. Juices are rapidly absorbed into the blood stream therefore being the quickest way in which the body can digest nutrients.

Citrus juice is renowned for its high content of Vitamin C and cold and flu fighting capabilities.

Freshly extracted juices should be consumed just after they have been made to avoid vitamin content loss.

PURCHASING AND STORAGE OF FRUIT AND VEGETABLES

• Always use fresh fruit for juicing.

• Select fruit with firm, smooth skins and free of blemishes.

• Valencia oranges are ideal for juicing.

• Select medium sized grapefruits, lemons and limes for easier juicing.

• Other citrus fruits such as mandarins, also known as tangerines, and grapefruit will yield very little juice.

• Citrus fruits can be stored at room temperature in a dry area.

• More juice is obtained from fruit stored at room temperature.

TROUBLE SHOOTING GUIDE

TIPS ON JUICING

+ 23 hidden pages