Breville BSG520, BSG540 User Manual
BSG520
BSG540
Sandwich Press
Instructions
2
Contents
Page
Breville recommends safety first 4
Know your Breville ikon™ Sandwich Press - BSG520 6
Know your Breville ikon™ Sandwich Press - BSG540 7
Operating your Breville ikon™ Sandwich Press 8
Toasting Open Sandwich ‘Melts’ 9
Hints for Best Results 10
Care, Cleaning and Storage 11
Recipes R1
Notes R10
Congratulations
on the purchase of your new Breville ikon™ Sandwich Press
3
4
Breville recommends safety first
We at Breville are very safety conscious. We design and manufacture consumer products with the
safety of you, our valued customer, foremost in mind. In addition, we ask that you exercise a degree
of care when using any electrical appliance and adhere to the following precautions:
Important safeguards for your Breville ikon™ Sandwich Press
Carefully read all instructions before operation
•
and save for future reference.
Remove any packaging material and
•
promotional stickers before using the Breville
ikon™ Sandwich Press for the first time.
To eliminate a choking hazard for young
•
children, remove and safely discard the
protective cover fitted to the power plug of
this appliance.
Do not place the Breville ikon™ Sandwich
•
Press near the edge of a bench or table during
operation. Ensure that the surface is level,
clean and free of water.
Keep the ikon™ Sandwich Press clear of
•
walls, curtains and other heat or steam
sensitive materials.
Do not place the Breville ikon™ Sandwich
•
Press on or near a hot gas or electric burner,
or where it could touch a heated oven. Use
the ikon™ Sandwich Press well away from
walls.
Provide adequate space above and on all
•
sides for air circulation around the Breville
ikon™ Sandwich Press.
Do not place the Breville ikon™ Sandwich
•
Press on any surface that may be affected
by heat. The use of a heat resistant matt is
recommended on these surfaces.
Do not use on a sink drain board.
•
•
Always use the ikon™ Sandwich Press on a
dry, level surface.
Do not touch hot surfaces. Use the handles
•
to lift and open the top plate. Take care when
using the Adjustable Grilling Height Control.
•
Do not leave the Breville ikon™ Sandwich
Press unattended when in use.
Do not place anything on top of the Breville
•
ikon™ Sandwich Press when the lid is closed,
when in use and when stored.
Always switch the ikon™ Sandwich Press
•
off at the power outlet, then unplug the cord
and to allow to cool, if appliance is not in use,
before cleaning, before attempting to move
the appliance, disassembling, assembling and
when storing the appliance.
Do not use harsh abrasives, caustic cleaners
•
or oven cleaners when cleaning the ikon™
Sandwich Press.
Keep the exterior housing and the non-stick
•
cooking plates clean. Follow the cleaning
instructions provided in this book. Refer to
Care, Cleaning and Storage (Page 11).
Breville recommends safety first continued
Important safeguards for all electrical appliances
Fully unwind the cord before use.
•
To protect against electric shock, do not
•
immerse the cord, plug or appliance in water
or any other liquid.
Do not allow the cord to hang over the edge
•
of a table or bench, touch hot surfaces or
become knotted.
This appliance is not intended for use by
•
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure that
•
they do not play with the appliance.
It is recommended to regularly inspect
•
the appliance. Do not use the appliance if
the power supply cord, plug or appliance
becomes damaged in any way. Return the
entire appliance to the nearest authorised
Breville Service Centre for examination
and/or repair.
Any maintenance other than cleaning should
•
be performed at an authorised Breville
Service Centre.
This appliance is for household use only. Do
•
not use in moving vehicles or boats. Do not
use outdoors. Do not use this appliance for
anything other than its intended use. Misuse
may cause injury.
Do not use harsh abrasives, caustic cleaners
•
or oven cleaners when cleaning this
appliance.
The installation of a residual current device
•
(safety switch) is recommended to provide
additional safety protection when using
electrical appliances. It is advisable that a
safety switch with a rated residual operating
current not exceeding 30mA be installed in
the electrical circuit supplying the appliance.
See your electrician for professional advice.
FULLY UNWIND THE CORD FROM THE CORD STORAGE FACILITY BEFORE USE.
5
6
Know your Breville ikon™ Sandwich Press
BSG520 2 Slice Sandwich Press
‘Warm Up’ and ‘Ready’ lights
2000 watt of power
for fast heat up and quick toasting.
indicate when the ikon™ Sandwich Press
is heating or ready to use.
Heavy duty die-cast arms
for durability, strength and
style.
Floating top plate
automatically adjusts to
thick or thin sandwiches.
Flat cooking plates
for extra crispy
toasted results.
Non-stick cooking plates
Convenient cord wrap in base
Stylish brushed stainless steel design
Adjustable Height Control clip
for cooking open sandwich
‘melts’ with 4 settings.
Safety locking storage clip
to lock plates closed for
upright storage.
Non-slip feet
Know your Breville ikon™ Sandwich Press continued
BSG540 4 Slice Sandwich Press
‘Warm Up’ and ‘Ready’ lights
2200 watt of power
for fast heat up and quick toasting.
indicate when the ikon™ Sandwich Press
is heating or ready to use.
Heavy duty die-cast arms
for durability, strength and
style.
Floating top plate
automatically adjusts
to thick or thin
sandwiches.
Flat cooking plates
for extra crispy
toasted results.
Non-stick cooking plates
Convenient cord wrap in base
Stylish brushed stainless steel design
Adjustable Height Control clip
for cooking open sandwich
‘melts’ with 7 settings.
Safety locking storage clip
to lock plates closed for
upright storage.
Non-slip feet
7
8
Operating your Breville ikon™ Sandwich Press
Toasting should take approximately 5-8
Before first use
Remove any promotional materials and
packaging materials before use. Check that
the cooking plates are clean and free of dust. If
necessary, wipe over with a damp cloth.
When using the Breville ikon™ Sandwich Press
for the first time you may notice a fine smoke
haze. This is caused by the heating of some of
the components. There is no need for concern.
To use as a grill
Insert the power plug into a 230/240 volt
1.
power outlet and then turn the power ON.
The red power ‘On’ light will illuminate.
Allow the ikon™ Sandwich Press to
2.
pre-heat with the top cooking plate in the
closed position until the green ‘READY’ light
illuminates.
During this time, prepare the sandwich.
3.
When the ikon™ Sandwich Press has preheated, place the sandwich onto the bottom
cooking plate. Always place sandwiches
towards the rear of the bottom cooking
plate.
Close the top cooking plate. The top cooking
4.
plate has a floating hinge that is designed to
evenly press down on the sandwich
(see Fig 1).
5.
minutes. Exact toasting time will be a matter
of taste. It will also depend on the type of
bread and type of filling used.
When the sandwich is cooked, use the
6.
handle to open the ikon™ Sandwich Press
and raise the top cooking plate. Remove
sandwich with the help of a plastic or
wooden spatula. Never use metal tongs or
a knife as these can cause damage to the
non-stick coating.
Always allow the ikon™ Sandwich Press
to pre-heat until the green ‘READY’ light
illuminates.
The safety locking storage clip should not
be used to clamp down the top cooking
plate when the sandwiches are in the
ikon™ Sandwich Press. The weight of the
top cooking plate will gradually press down
the sandwich during the cooking process.
When using the ikon™ Sandwich Press for
the first time you may notice a fine smoke
haze. This is caused by the heating of some
of the components. There is no need for
concern.
CAUTION: HOT SURFACE - THE
TEMPERATURE OF ACCESSIBLE
SURFACES MAY BE HIGH WHEN THE
APPLIANCE IS OPERATING.
FULLY UNWIND THE CORD FROM THE
Fig 1
CORD STORAGE FACILITY BEFORE USE.
Loading...