Bretford UNI1 User Manual

UNI1

PRINTER STAND

Assembly Instructions

PARTS LIST

Qty Part# Description
2 010-1627 Machine Rests
4 010-1629 Extender Brackets
1 010-1630 Modesty Panel
1 014-0166 Wire Basket
1 022-1324 Right Pedestal Assembly
1 022-1325 Left Pedestal Assembly

TOOLS REQUIRED

Phillips Screwdriver
Adjustable Wrench

HARDWARE LIST

Ref Qty Part# Description
AA 4 015-0045 Floor Glides
BB 16 030-0325 1/4-20 x 1/2” Truss Screws
CC 12 030-0207 1/4-20 Flanged Hex Nuts
DD 4 030-0313-901 Machine Rest Cups
EE 4 030-0272 1/4-20 x 1/2” Carriage Bolts
FF 4 030-0274 Lock Washers
GG 4 030-0006 1/4-20 Wing Nuts

1 018-0034 13” Ground Wire

STEP 1

Twist on the floor glides (AA) onto
the bottom of both pedestals.

AA

STEP 2

Lay one pedestal on a flat surface with holes facing
upward. Position modesty panel on pedestal panel and
attach with screws (BB). Position other pedestal on
modesty panel and attach with screws. Stand unit upright.

BB

STEP 3

Attach machine rests between pedestals
using screws (BB) and flange nuts (CC) as
shown. The spacing of the machine rests is
determined by your printer size.

CC

STEP 4

If printer is larger than printer stand, use the

extender brackets to give you additional length.
Place extender brackets on machine rests and
fasten with screws (BB) and flange nuts (CC) as
shown. Slide extender brackets out to desired size.

STEP 5 STEP 6

Fasten machine rest cups (DD) onto machine rests OR
extender brackets (if used) using carriage bolts (EE),
washer (FF) and wing nut (GG) as shown. The location of
machine rest cups is determined by the printer size.
Once everything is attached, place your printer on stand.

GG

www.bretford.com

DD

EE

FF

Bretford Bretford Ltd.

11000 Seymour Avenue Technology House
Franklin Park, IL 60131 7 Lake End Court, Taplow
TEL: [phone] Bucks SL6 0JQ England

800.521.9614 TEL: [phone]

FAX: [phone] FAX: [phone]

800.343.1779

Hook wire basket into the slots
on the back of the unit.

NOTE: Included in your hardware
pack is ground wire. Consult your
printer manual for proper procedures.

Part# 031-0661-C
Rev. 09.24.97