Bretford TC15SAFF, TC15SA Assembly Instructions Manual
TC15SA / TC15SAFF
19” RACK PRESENTATION CART
WITH & WITHOUT POWER
Assembly Instructions
PARTS LIST
Qty Part# Description
1 022-2820 Welded Body Assembly
2 022-2697 Left Door Assembly**
2 022-2698 Right Door Assembly**
2 010-1188 Door Stop Brackets**
1 022-2695 Top Shelf w/Grommet Hole
2 010-4785 Slide Brackets
2 030-1191 14” Full Extension Slides
2 010-4780 Keyboard Shelves
1 030-1206 Rack Rail Pair
4 010-4799 Rail Brackets
2 010-4867 Utility Shelves
2 015-0002 4” Casters w/o Brake
2 015-0003 4” Casters w/ Brake
1 UCSE10 Electrical Unit - TC15SAFF ONLY
** Doors and stop brackets are attached to body assembly at
the factory prior to shipping.
HARDWARE LIST
Ref Qty Part# Description
AA 14 030-0325 1/4-20 x 1/2” Combo Screws
BB 8 030-0256 1/4-20 Flange Nuts
CC 16 030-1228 8-32 x 1/4” Combo Truss Hd Screws
DD 8 030-1203 #8-32 Acorn Nuts
EE 16 030-0240 1/4” External Lockwashers
FF 10 02236 8-32 Hex Flange Nuts
GG 8 030-0300-10T 5/8” Square Head Bolts
HH 8 030-0002 5/16-18 Hex Serrated Nuts
II 2 030-0302 #8-32 x 3/8” Screws - TC15FF ONLY
JJ 8 030-0402 #10-32 x 5/8” Combo Screws
KK 8 030-0383 #10 x 1/2” “AB” Truss Hd Screws
1 010-1106 Hex Wrench
4 012-0286 Plastic Door Handles
TOOLS REQUIRED
Hex Wrench (Provided)
Phillips Screwdriver
Rubber Mallet
Insert each caster into the bottom of each leg. If caster does not insert easily,
use a rubber mallet to tap caster in place. Once caster are SECURELY in
place, stand unit upright.
STEP 1
1
MIDDLE SHELF ATTACHMENT
BOTTOM SHELF ATTACHMENT
STEP 2
Attach L-brackets to one side of the cart. These should be mounted on the side that you wish the 19”
rack rails to be installed on. Attach each bracket (2 per shelf) with screws (AA) and nuts (BB) as shown.
NOTE: Screws are only used on the bottom shelf. Middle shelf has screws already welded in place.
BB
AA
2
STEP 3
MIDDLE SHELF ATTACHMENT
BOTTOM SHELF ATTACHMENT
Attach the rack rails to the L-brackets with screws (AA) and nuts (BB) as shown.
The threaded holes (smaller) are facing out.
NOTE, THE RACK RAIL MUST BE INSTALLED AS SHOWN.
TOP DOWN VIEW OF INSIDE CART
BB
AA
INCORRECTCORRECT
3
Loading...