PowerSync Station 20
HE406LL/A
for iPad and iPad mini
®
Charge your devices
1. Place one iPad in each slot of the PowerSync Station, and attach
the included Lightning cable.
2. Unwind the power cord for the PowerSync Station and plug it into a
power outlet.
3. Turn the PowerSync Station on.
Your iPad and iPad mini devices will begin charging.
Configure your Devices
To configure multiple iPad devices, we recommend using Apple
Configurator. Apple Configurator works with Apps from the App store,
and allows you to install those apps, along with settings specific for your
organization, to multiple devices simultaneously.
1. Connect your devices to the PowerSync Station 20 for iPad.
2. Connect your PowerSync Station 20 for iPad to your Mac.
3. Launch Apple Configurator (Available for free on the Mac App
Store.)
4. In Apple Configurator, enter your settings, configure your profiles,
and import your Apps. Click “Prepare”
To help our customers with Apple Configurator, Bretford has written an
eBook entitled “iOS Deployment: A guide for managing iPad, iPhone,
and iPod touch in your organization”. Get this free resource on our
website at bretford.com/apple/deployment.
Understanding LED Status Lights
The PowerSync Station 20 features LED status indicators above each
slot to let you know when your devices are ready:
Light Description
Off Device is not connected.
Amber
Green
Flashing Amber
Flashing Amber and Green
Device is charging.
OK to disconnect.
Device is fully charged.
OK to disconnect
Device is charging & syncing.
Do not disconnect.
Device is fully charged, but still syncing.
Do not disconnect.
Monitor Your Station
The PowerSync Station 20 allows you to remotely monitor the status of
the iOS devices connected to your station. With the PowerSync+ app,
you can:
Check Charge Status Receive Notifications Receive Reporting
®
PowerSync+
All devices are fully
charged
View
OK
To get started, download PowerSync+ from the App Store, or visit
powersyncplus.com.
Configure the Station to Join a Wi-Fi Network
To configure the PowerSync Station to join a Wi-Fi network, you’ll use
your iOS device’s bluetooth connection to share it’s Wi-Fi network
information with the station.
1. Make sure your iOS device is connected to the Wi-Fi network you
want to share with your station.
2. Turn the PowerSync Station power switch to OFF, then back to ON.
After turning on, if you haven’t already configured your PowerSync
Station, your station will be discoverable via Bluetooth for one minute.
3. On your iOS device, open the Settings app, and navigate to
Bluetooth.
4. Choose to pair with “PowerSync+”
5. When prompted to “Share Wi-Fi Settings”, tap the “Allow” button.
Your PowerSync Station will join your WiFi Network. Use the
PowerSync+ App to add this station to your account.
Technical Specifications
Model Number: HE406LL/A
Dimensions: 28.7 in wide x 15.0 in deep x 14.7 in high
Capacity: 20 iPad or iPad mini devices
Weight without devices: 49 lbs
Rating: 125VAC, 3A Max. 60Hz
Max Charge Current: 2.4A for each device
Cord: Certified Power Supply Input Cord with IEC plug C13
Approval: USA and Canada
Assembly: Ships fully assembled
Warranty: 12 years on cart, 2 years on electrical
Electrical
The socket-outlet shall be installed near the equipment and shall be easily accessible!
Avoid sparks. Avoid arcing. Always turn OFF the power to the unit before plugging IN or
OUT! Be sure each device is turned OFF before plugging into the station.
For Safety Purposes, make sure all electrical components do not exceed the maximum
load rating of 5 amps.
Risk of electrical shock. Do not plug the power cord into another extension cord or
relocatable power tap.
The Power Module inside the station is only for charging & syncing Apple iPad devices.
Do not unplug this product from the outlet when your hands are wet.
Do not plug the unit in if the switch, receptacle(s) or power cord has been damaged.
Contact Bretford before attempting to make any type of electrical repair or parts
replacement.
Caution
Ventilation is critical for PowerSync products to operate correctly, Do not block the
ventilation holes on the unit. Proper air flow is required for safe operation of equipment.
Arranging devices in the station should be such that a hazardous condition is not achieved
due to uneven mechanical loading.
Install and operate the cart in an environment compatible with the maximum ambient
temperature of 25° C or 77° F.
This station is not designed to be operated by a child or student. Adult operation and
supervision is recommended at all times.
Do not place a TV or monitor on top of the station. The total weight of accessories on top
of the cart should be less than 25 lbs.
This cart it is not designed for outdoor use.
Liquids should not be stored in, set on or placed inside this unit.
FCC Note:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS OR CHANGE TO THIS EQUIPMENT.
SUCH MODIFICATIONS OR CHANGE COULD VOID AND CHANGE ANTENNA WHICH
THE MANUFACTURER PROVIDES. IT IS THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF exposure guidelines, this equipment should be
installed and operated with a minimum distance of 20cm between the radiator and your
body.
IC Note:
This device complies with Industry Canada license-exempt RSS standard(s). operation is
subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Note: Cet appareil est conforme a la partie 15 des reglements de la FCC st aux nomes
RSS de l’Industrie du Canada. Son fonctionnement est soumis aux deux conditions
suivantes: (1) cet appareil ne doit pas causer des interferences nuisibles, et (2) cet appareil
doit accepter toute interference recue, y compris les interferences qui peuvent provoquer
un functionnement indesirable.
Le fabricant n’est pas responsible des toutes interferences radio ou television causes par
des modifications non autorisees a cet appareil. De tells modifications peuvent empecher
l’utilisateur d’utiliser l’appareil.
Loading...