Bretford FP42MUL, FP42UL, FP60MUL, FP60UL, FP42ULC User Manual

FP42UL FP42MUL
FP60UL FP60MUL

FLAT PANEL CART WITH OR
WITHOUT A PULL OUT SHELF

WARNING: FP42 carts are intended to hold monitors up to 75 lbs and FP60 carts
are intended to hold monitors up to 100 lbs. The use of a TV monitor weighing more
than that may result in instability causing possible injury. The top, middle and bottom
shelves are intended to hold equipment up to 50 lbs. on each shelf. The pull out
shelf on FP42MUL and FP60MUL is intended to support equipment up to 15 lbs.

PARTS LIST

Cart Models: FP42UL, FP42MUL, FP60UL & FP60MUL
Qty Part# Description
1 022-3065 Right Rear Leg Assembly
1 022-3066 Left Rear Leg Assembly
2 022-3067 Front Leg Assemblies
1 010-5778 Top Shelf - FP42 Models
010-5794 Top Shelf - FP60 Models
1 010-5135 Middle Shelf - FP42 Models
010-5795 Middle Shelf - FP60 Models
1 010-1892 Bottom Shelf - FP42 Models
010-5796 Bottom Shelf - FP60 Models
1 022-2827 Handle Assembly
1 022-3068 Monitor Bracket - FP42 Models
022-3091 Monitor Bracket - FP60 Models
2 010-4953 Hook Bars
2 010-4956 Stop Brackets
2 015-0017 5” Stem Casters w/o Lock
2 015-0018 5” Stem Casters with Lock

Pull Out Shelf Models : FP42MUL & FP60MUL
Qty Part# Description
2 010-5783 Shelf Brackets - FP42 Models
010-5784 Shelf Brackets - FP60 Models
1 010-5782 Pull Out Shelf
1 030-1468 Left Outer Slide
1 030-1470 Right Outer Slide
2 030-1471 Inner Slides

HARDWARE LIST

Ref Qty Part# Description
AA 22 030-0300-10T 5/8” Square Head Bolts
BB 24 030-0002 5/16-18 Hex Serrated Nuts
CC 2 030-1349 5/16-18 x 3/4” Hex Hd Screws
DD 2 SC1048B 1/4-20 x 45mm Bolts
EE 2 030-0207 1/4-20 Serrated Flange Nuts
FF 4 030-0401 5/8-18 x 1 1/2” Hex Head Screws
GG 4 030-0411 5/16-18 Serrated Nuts
HH 8 030-0304 1/4-20 X 5/8” Combo Truss Hd Screws
II 4 030-0865 #6 x 1/2” Button Pin-In Hd Screws
JJ 2 030-0354 10-32 x 1 1/2” Button Sockets Screws
1 010-1106 Hex Wrench
1 030-1352 1/8” Security Pin-In Driver Bit

1 044-2124 Courtesy Hardware Pack
This Pack Consists of:
(4) Metric M4 x 12 Screws
(4) Metric M4 x 30 Screws
(4) Metric M5 x 12 Screws
(4) Metric M5 x 30 Screws
(4) Metric M6 x 12 Screws
(4) Metric M6 x 35 Screws
(8) Small Washers
(20) Large Washers
(4) 5/8” Large Spacers

Electrical Unit Models : FP42UL-E5BK, FP42MUL-EBK,
FP60UL-E5BK & FP60MUL-E5BK
Qty Part# Description
1 E6 UNIT 6-Outlet Electrical Unit

1

STEP 1

Position the top shelf onto the rear legs making sure the leg brackets are to inside of
the shelf. LOOSELY secure the shelf to the legs using screws (AA) and bolts (BB).

These side holes are used for
installing the handle. Leave one of
the sides open to install the handle.

AA

BRACKET TO THE INSIDE

BB

2

STEP 2

Slide the middle and bottom shelves onto the rear legs. Slide the front legs on. LOOSELY
install hardware to each corner, remembering to leave access for the handle.

Slide on middle shelf.

Slide on bottom shelf.

Slide on front legs.

AA

AA

BB

INSTALL HARDWARE TO EACH
CORNER, OMIT HANDLE SIDE

BB

3