Bretford CFPS Assembly Instructions Manual

CFPS

Surge Protected Electrical Unit

Assembly Instructions

PARTS LIST

Qty Part# Description
1 CFPS 4 Outlet Electrical Unit

TOOLS REQUIRED

Phillips Screwdriver
Electric Drill (if necessary)
7/64" Drill Bit (if necessary)

HARDWARE LIST

Ref Qty Part# Description
AA 2 02112 #8 x 3/8" Sheet Metal Screws
BB 2 02236 #8-32 Hex Lock Nuts

(use when necessary)

CC 2 030-0302 #8-32 x 3/8" Combo Truss Screws

(use when necessary)

OPTION 1

Lay unit down and locate pre-drilled
holes. Attach E-unit through holes
using screws (AA).

Bretford
11000 Seymour Avenue
Franklin Park, IL 60131
TEL: [phone]

FAX: [phone]

If there are not pre-drilled holes, mark holes with a
pencil in desired location. Drill a 1/2" deep hole with
a 7/64" drill bit and attach E-unit with screws (AA).

800.521.9614

800.343.1779 www.bretford.com

OPTION 2

Turn unit over and locate pre-drilled
holes on wood top. Attach E-unit
through holes using screws (AA).

NOTE:

Part #031-1523
Rev. 04.22.08 CZ