Breezer Oasys AB10-A-OO-G, ABT10-A-OO-G, AB10-A-OO-B, AB20-A-OO-G, ABT10-A-OO-B User Manual

USER MANUAL

This manual covers

the following models:

AB10-A-00-G ABT10-A-00-G
AB10-A-00-B ABT10-A-00-B
AB20-A-00-G ABT20-A-00-G
AB20-A-00-B ABT20-A-00-B

Firmware v3.4

The Breezer Oasys

The Breezer Oasys is an outdoor cooling
device engineered to create luxuriously
cool environments outdoors. To get the
most out of your Breezer Oasys, become
familiar with its features and functions as
described in this manual.

SAVE THIS MANUAL

CONTENTS

The Breezer Oasys 2

Warnings 3

Breezer Oasys Overview 4

Breezer Oasys Reservoir 6

Breezer Oasys Operation 8

Maintenance 11

Troubleshooting 13

Helpful Tips 14

2

ENGLISH

Warnings

– This unit is intended for use only as

specified in this manual. If you have
questions about its use, please contact
Breezer Mobile Cooling.

1-844-233-5673

[e-mail]

– Use only on a circuit protected by a

ground-fault circuit-interrupter (GFCI).

– Avoid using extension cords

– Do not allow plug to become wet.

Do not plug in while hands are wet.
Doing so causes risk of electric shock.

– Do not alter the plug in any way.

– If the power cord is damaged, do not

attempt to repair it yourself.
Contact Breezer Mobile Cooling
customer service for assistance.

1-844-233-5673

[e-mail]

– Turn off and unplug the unit prior to

filling or emptying water reservoir.

– Turn off and unplug the unit prior to

moving.

– Turn off and unplug the unit prior to

cleaning it.

– Always unplug the unit by pulling on the

plug and never on the cord.

– Do not insert fingers or other objects

inside the fan head, doing so may cause
bodily injury.

– Children can fall into open water

reservoir and drown, even in a small
amount of water.
Keep children away from reservoir.
Keep reservoir lid on at all times.

– Closely supervise nearby children and

pets when using this unit. Do not leave
unit unattended.

– Children shall not play with the unit.

– Cleaning and user maintenance shall

not be made by children without
supervision.

– The unit is not to be used by persons

(including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision
or instruction.

– This unit can be used by children aged

from 8 years and above and persons
with reduced physical, sensory or
mental capabilities or lack of experience
and knowledge if they have been given
supervision or instruction concerning
use of the unit in a safe way and
understand the hazards involved.

– When operating unit, use common

sense. Stay clear of moving parts and
only use water that is safe for drinking.

– If the unit becomes damaged or

malfunctions, do not attempt to repair
the unit. Doing so will void the warranty.
Contact Breezer Mobile Cooling
customer service for repair assistance.

1-844-233-5673

[e-mail]

– The appliance is not to be used by

persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction” or equivalent.

– This unit is suitable for use as a fan for

tropical climates.

– This unit is suitable for use outdoors.

– Do not throw away this user manual,

keep it for reference.

ENGLISH

3

Breezer Oasys
Overview

FRONT

Atomizing

Disc

Fan
Head

Handle

Reservoir

Front

Casters

4

Reservoir
Cover

Caster
Lock

ENGLISH

REAR

Hand

Guard

Handle

Control

Panel

Power Cord

Storage

ENGLISH

5

Breezer Oasys
Reservoir

Filling the reservoir

Your Breezer Oasys’ reservoir holds up to 19 gallons of water which can cool
for up to 18 hours of use. When filling your Breezer Oasys’ reservoir, be careful
not to fill it past the max fill line.

1. Open reservoir. Hold reservoir
cover from slots on the sides and
pull u p and towards you with both
hands. Set reservoir cover aside.



Note: Do not lift reservoir cover
from the front. Doing so may
damage the cover.



6

ENGLISH

2. Prior to filling the reservoir,
ensure that the drain plug
is securely seating in the
drain hole.

3. Fill reservoir to desired level,
do not fill past the max fill line.
If the reservoir is filled past the
max fill line, water may leak out.

4. The water valve output may be
adjusted for optimal comfort
according to climate.

5. Once the reservoir has been
filled to desired level and water
valve output has been adjusted,
place reservoir cover back on
the reservoir. Gently tap reservoir
cover back in place.

Draining the reservoir

Depending on volume of water to be
drained, you may want to move your
Breezer Oasys to a suitable location
prior to draining.

1. To drain the reservoir, remove
reservoir cover. Reach into the
reservoir and pull the drain plug.

2. We recommend draining the
reservoir and wiping down reservoir
at least once a week to ensure
water is fresh and reservoir
remains clean.

ENGLISH

7

Breezer Oasys
Operation

BREEZER OASYS CONTROL PANEL

Oscillation
Button

Power

Button

Fan Speed

Buttons

Turning ON Your Breezer Oasys:

1. Press the power button and
hold for one second. The LED
light for the power button will be
lit and the fan blades will begin to
slowly rotate to indicate the unit is
powered on.

2. Press the fan speed button to
increase the fan speed.
Adjust the fan speed by pressing
the or buttons.

3. Press the oscillation button
once to activate the oscillation
feature.

4. Press the atomizer button once
to activate the misting feature.

Mist
Button

Turning OFF your Breezer Oasys:

1. Press the power button and
hold for one second.

2. The power button’s light will blink
as the unit turns off.

3. Your Breezer Oasys will memorize
your settings until the next time it
is turned on.

Adjusting the Fan Settings:

The Breezer Oasys of fers variable
fan speed for optimal comfort. Adjust
the fan speed to your comfort and
according to how large an area you
would like to cool.

1. Push the and buttons on
the control panel to adjust the
fan speed.

2. Your Breezer Oasys will memorize
these settings when turned off,
unless it is unplugged.

8

ENGLISH

Oscillation:

To cool a wide area, use your Breezer
Oasys’ oscillation feature. This
feature can also be used to point the
fan head towards a different location
without moving the entire unit.

1. Push the Oscillation button on
the control panel to turn the
oscillation feature on and of f.
When turned on, the oscillation
button’s LED light will be lit.

2. When the oscillation is turned off,
the fan head will stop rotating at
its current location. Your Breezer
Oasys will remember your settings
until the next time it is turned on,
unless it is unplugged.

Adjusting Mist Settings:

The mist setting is controlled by the water valve output located inside the
reservoir tank. Your Breezer Oasys will be shipped with the water valve

output pre-set at a low setting.

WATER

VALVE

CLOSED

To increase mist produced turn
the water valve output lever counter
clo ck wise.

To decrease mist produced turn the
water valve output lever clockwise.

WATER

VALVE

OPEN

Flow
Direction

Water
Valve
Lever

Water
Valve

Misting Feature:

The misting feature may be turned on
and off so that your Breezer Oasys
may be used as a misting fan.

1. Ensure your Breezer Oasys has
water in the reservoir tank.

2. Push the Mist button on the
control panel once to turn the
mist feature on. The mist button’s
LED light will turn on.

3. Wait a few seconds to allow
the water flow to travel to the
fan head.

4. To turn the mist feature off,
press the mist button again.

Adjusting Your Breezer Oasys for
Your Environment:

The optimal setting will vary depending
on your climate. Dryer climates will
require a higher water valve output
while humid climates will require a
lower water valve output. The mist
setting will be optimal when you can
stand about 6 feet from your Breezer
Oasys and not fog up your sunglasses.

Follow the instructions outlined
below to change the water valve
output to optimize the mist setting
for your climate:

1. Turn the Breezer Oasys on and let
it run for 10 seconds to allow the
water flow to start.

2. After 10 seconds, start the atomizer.
Do not turn the oscillation on.

a. If there is a strong mist at 6 feet

away such that your glasses
are getting fogged, then the
moisture setting is too high for
conditions.

ENGLISH

9

To decrease misting, turn the

water valve clockwise and back
towards the 3 o’clock position.

b. If there is not enough mist,

the water valve output is not
open enough. Turn the water
valve counter clockwise by a
few degrees until the cooling
and misting are ideal.

Control panel – Locking feature:

When the locking feature is activated
only the power button will function,
all other features will be locked.

1. To activate the locking feature
hold down the fan speed and
buttons for 5 seconds until the
LED lights begin to blink.

2. The locking feature is now activated,
the lights will continue to blink to
indicate that the locking feature
is on.

3. This will lock: oscillation, atomizer,
and fan speed. Power button
will still function.

4. To unlock the controls, hold down
the fan speed and buttons
for 5 seconds until the LED lights
stop blinking.

Control panel – Memory feature:

The Breezer Oasys control panel is
equipped with a memory feature.
When it is powered off it will
remember the settings of its last use.

When powered back on, it will
resume the same oscillation,
atomizer, and fan speed settings of
its last use.

Control panel – Dim/Brighten
LED lights:

The Power Breezer is equipped with
a feature to dim/brighten the control
panel’s LED lights:

To dim/brighten the control panel
LED lights:

1. Press and hold the atomizer
button for one second
then release.

2. The atomizer button’s LED
light will blink indicating you have
initiated the dim/brightening
feature.

3. To dim, repeatedly press the fan
speed button until the LED lights
are dimmed to the desired level.

NOTE: The dimming feature’s lowest
level will turn off the LED lights.

1. To brighten, repeatedly press the
fan speed button until the LED
lights are brightened to the desired
level.

2. Press atomizer button once
to exit dim/brightening feature.
Current settings are set and saved.

10

ENGLISH

Maintenance

The Breezer Oasys was designed with easy maintenance in mind. Below are a
few steps to follow to keep your Breezer Oasys performing at its best.

Cleaning the water pump:

It is important to occasionally
clean the water pump to maintain
its proper function and to avoid
damage.

1. Gently pull front cover off to
remove it.

2. Remove locking ring by turning it
counter clockwise.

3. Gently pull impeller assembly to
remove it.

5. Reassemble water pump.

6. Gently pull back cover off to
remove it.

Clean sensors with a brush and
water, use a mild soap if necessary.

7. Reassemble water pump.

4. Clean parts and pump with
soap and water.

11

ENGLISH

Cleaning the water system:

For optimal performance of the water
system, we recommend the following
maintenance be performed monthly.

WARNING: Once the cleaning process
is started, it must be run through
all steps including rinse to avoid
atomizing the cleaning solution and
blowing it out of the unit.

1. Following de calcification product
manufacturer’s safety guidelines,
fill a bucket with a calcium and
lime remover diluted with water
following the de calcification
product manufacturer’s
recommendation. Fill the bucket
deeply enough to completely
submerge the water pump.

2. Place the bucket in the tank, and
place the water pump into the
bucket/mixture. Position the drain
tube so that it drains into the
bucket as well.

3. Ensure the atomizer water valve is
fully open, in line with the tubing.

4. Power on the unit.

5. Press the atomizer and oscillation
buttons at the same time
and hold them for 5 seconds. This
will immediately enter the cleaning
mode and water should start
circulating but the fan, atomizer
and oscillation will remain OFF.
The LED lights for the atomizer and
oscillation will be ON, indicating
cleaning mode.

6. Allow the cleaning mode to run for
about 15 minutes.

7. Power off the unit.

8. Dispose of the diluted calcium
and lime remover solution
following de calcification product
manufacturer’s recommendation.
Replace the cleaning mixture
with clean water and repeat steps
2 through 6 above to flush the
system with clean water.

WARNING: Failure to flush the system
with clean water will result in some
cleaning solution being atomized and
blown out of the unit while in use.

9. IMPORTANT: After completing the
rinse and powering off the unit,

UNPLUG the unit and wait
10 seconds. This is the ONLY way
to exit the cleaning mode.

WARNING: If you encounter a unit

in cleaning mode, flush with clean
water (return to step 7) prior using
the system.

Caring for the reservoir:

1. Once a week drain the reservoir
and allow for it to dry overnight.

2. If the inside of the reservoir
becomes slippery or slimy to the
touch, drain the reservoir and
clean it with mild soapy water.

Do not use bleach, chemicals or
harsh detergents. Rinse well with a

hose and drain. Allow reservoir to
fully air dry before storing.

Storing your Breezer Oasys:

1. During daily use, you may store
your Breezer Oasys outside. We
recommend storing it in the shade
or in a protected area.

2. For long term storage, ensure the
reservoir is fully dry and cover your
Breezer Oasys to protect it f ro m
dust. We recommend purchasing
a Breezer Oasys Waterproof Cover.

Caring for the exterior:

1. Occasionally wipe the exterior with
a cloth moistened with water.

2. For cleaning dirt use only mild
soapy water. Do not use bleach,

chemicals or harsh detergents.

12

ENGLISH

Troubleshooting

Before contacting the Customer Care Center, please locate your
Breezer Oasys’ serial number inside the reservoir and have it ready.

Atomizing disk is spinning,
but there is no mist:

1. Verify that there is water in the
rese r voir.

2. Verify that the water pump is
running. Water pump should
vibrate when running.

3. If water pump is running but there
is no water flowing, check that the
water valve output is open and
that the water valve output is
open enough for your climate
(See page 9).

4. Clean water pump. See cleaning
the water pump (Page 11).

5. If the above steps fail, the water
pump may need to be replaced.
Please contact our customer
care center at:

[e-mail]
or 844-233-5673.

Your Breezer Oasys shuts off:

1. Unplug your Breezer Oasys.

2. Wait 10 seconds, then plug it
back in.

3. Restart your Breezer Oasys.

Your Breezer Oasys will not roll
when pushed:

1. Ensure wheel brakes are in the
OFF position.

Misting output is too high and
droplets are creating excessive
moisture:

1. Reduce mist output setting.
See adjusting your Breezer Oasys
for your environment (Page 9).

Unit is plugged in, and powered on,
but the LED lights are off:

1. The LED lights dimming feature
may have been activated. The LED
lights may have to be brightened
(See Page 10).

ENGLISH

13

Helpful Tips

1. Do not store water in reservoir
for long periods of time. Keep the
water in your Breezer Oasys fresh.
If you fill your reservoir but do
not use it within a week, drain the
reservoir, rinse it, and refill it with
fresh water.

2. Your Breezer Oasys is designed
for daily outdoor use. When used
regularly, you may store your
Breezer Oasys outdoors. We
recommend placing it under a
covered area. During periods of
long storage, storing your Breezer
Oasys indoors and under cover is
preferred.

3. Do not use bleach, chemicals or
harsh detergents for cleaning, this
may damage your Breezer Oasys.

4. Your Breezer Oasys has the power
to cool 1, 500 square feet. Use the
oscillation feature to cool a wide
area.

5. Your Breezer Oasys is designed
to create cool comfortable
environments using water to
cool down air, but never get you
wet. To set your Breezer Oasys’s
mist to the perfect setting, see

adjusting your Breezer Oasys
for your environment section of

this manual. To enjoy the most
comfortable environment provided
by your Breezer Oasys, observe the
following placement guidelines:
a. In moist climates, place your

Breezer Oasys about six feet
from entertainment areas for
optimal performance.
(High Humidity)

b. In dryer climates, your Breezer

Oasys may be placed four feet
from entertainment area for
optimal performance.
(Low Humidity)

6. Your Breezer Oasys was specially
designed to cool outdoor and
partially covered spaces. It was
engineered to cool well ventilated
areas. We do not recommend using
the Breezer Oasys to cool indoor
spaces. Doing so may cause
excess moisture buildup in the
indoor space.

7. Do not attempt to repair your
Breezer Oasys yourself, doing so
will void the warranty.

14

ENGLISH

WARRANTY

For one ( 1) yea r from date of shipment to the fir st purchase r, Breeze r Hold ings LLC (“Ma nufa ctur er” )
warra nts the f an, f an bla des, f an moto r, air stra ighte ners , and pump of the Breeze r® Oa sys uni t to be
free from defects in materials and/or workmanship. Those components found, upon examination
by facto ry-a uthorized pe rson nel, to b e defe ctive in materi al and /or workm anship will be repai red or
repla ced with new or re manufact ured pa rts a t Manu facturer ’s or authorize d deal er’s o ption and without
charg e. All other Breezer ® Oasy s component s have a ninety day (90 day) war rant y from th e shipment
date aga inst d efec ts in ma terials and/or workma nshi p. Transp ortation ch arge s on par ts submitted for
repla ceme nt or rep air un der th is warranty shall be b orne by the purchase r. Unles s spec ific ally au thorized
in writing by an authorize d represent ative of M anuf actu rer, any and all rep airs a nd repl acem ents m ust be
perf orme d by Manufacturer o r an auth orize d Breezer® Oa sys dealer or representa tive. War ranty claim s
must be made a s soon as reaso nably possi ble af ter a defect is discove red, b ut befo re the end of the
warra nty coverage period o n the pa rticu lar pa rt. W hen a warrant y repa ir or rep lace ment is need ed, th e
Breeze r® Oa sys mus t be brought to th e Manu facturer ’s or authorize d deal er’s place of b usine ss dur ing
normal busi ness h ours . A reas onab le time m ust be a llowed for the p erfo rman ce of rep airs o r repla ceme nts .

THES E EXP RES S WARRA NTIE S ARE T HE ON LY WARRANTIES BY MA NUFAC TUR ER ON TH E BRE EZER ®
OASYS. THES E WARR ANTI ES ARE LIMI TED IN D URATION TO THE T IME P ERIO D(S) OF THES E WRITTEN
WARRA NTIE S. TH ESE WAR RAN TIES ARE IN L IEU OF ALL OTHER OBL IGATIONS, LI ABI LITI ES OR
WARRA NTIE S, WH ETH ER EXPRES S OR IM PLI ED. THESE WARRANTIES D O NOT COVER:

1. NORMAL DETERIORATION OR FADING OF COLOR, COSMETIC OR APPEARANCE ITEMS;

2. DAMAGE OR MA LFUNCTI ON DU E TO IMP ROPER REPAI R DUE TO ANY UNAUTHO RIZED
ALTERATIO N OR MODIFI CATION M ADE TO TH E BRE EZER ® OASYS;

3. DAMAG E OR MALFUN CTI ON DU E TO ABUS E, NE GLEC T, ACCIDE NT OR FI RE;

4. DAMAGE CAUSED BY A N ON- COVE RED, U NAUTH ORIZ ED PART;

5. FAILURE TO FOLLOW MANUFACTURER’S CLEANING AND MAINTENANCE GUIDELINES;

6. USE OF CIVI LIAN/IND USTRIAL M ODELS IN MILITARY AP PLICATIONS OR ON/AT MILI TARY
INSTALLATIONS; AND

7. SC RATCHES OR DEN TS TO THE O UTER S URFACE /SKIN ARE N OT COVER ED.

MANU FACTU RER AN D ITS AUT HOR IZED DE ALE RS AND DISTRIBUTORS S HALL N OT BE LIA BLE FOR
ANY LOS S OF USE O F THE B REE ZER® OASYS, FO R ANY A LTERNATE EQU IPM ENT, FOR A NY DAMAG E
TO GOODS, COM MER CIAL LOSS, LOS S OF TI ME OR I NCON VENIENC E, OR FOR ANY OTHER IN CID ENTAL
OR CONSEQUENTIAL DAMAGES.

For more information, please go to www.breezeroasys.com.

CUSTOMER / TECHNICAL SUPPORT

Phone: [phone]

[e-mail]

www.BreezerOasys.com

SOCIAL MEDIA

Follow us and share your Breezer Oasys pictures on Social Media

#BreezerOasys

Facebook: facebook.com/BreezerOasys

Twitter: twitter.com/BreezerOasys

Instagram: @breezeroasys

Houzz: http://www.houzz.com/pro/breezeroasys/breezer-oasys

ENGLISH

15

550 SW 12th Avenue, Suite 550, Deerfield Beach, Florida, 33442

©2016 Breezer Holdings, LLC. All Rights Reserved.

Breezer® is licensed under U.S. Patent No. 6,789,787.