BRAYER BR1245 User Manual [ru]

BRAYER BR1245 User Manual

brayer.su

Instruction manual Инструкция по эксплуатации

Blender BR1245

Блендер BR1245

СОДЕРЖАНИЕ

EN......................................................................................................................................

3

DE....................................................................................................................................

10

RU....................................................................................................................................

19

KZ.....................................................................................................................................

28

BLENDER BR1245

The blender set includes the blender attachment and the bottle. The blender attachment is used for mixing, chopping or whipping products. You can make liquid fruit or vegetable blends in the bottle. You can use the bottle with installed lid any time.

DESCRIPTION

1.Blender attachment

2.Motor unit

3.Maximal speed button “TURBO”

4.On/off button

5.Knife block

6.Bottle lid

7.Bottle

4

3

2

1

ENEN 3

6

5

7

4 EN

SAFETY MEASURES AND OPERATION RECOMMENDATIONS

Read the operation instructions carefully before using the unit, after reading keep them for future reference.

Use the unit for its intended purpose only, as it is stated in this manual.

Mishandling the unit can lead to its breakage and cause harm to the user or damage to the user’s property, which is not covered by warranty.

Make sure that the operating voltage of the unit indicated on the label corresponds to your home mains voltage.

ATTENTION! Continuous operation time should not exceed 30 seconds while using the blender attachment and 30 seconds while using the bottle attachment. Make at least 3 minutes break between the operation cycles.

Do not use the unit outdoors.

It is recommended not to use the unit during lightning storms.

Place and use the unit on a flat dry and steady surface.

Protect the unit from impacts, falling, vibrations and other mechanical stress.

Never leave the unit connected to the mains unattended.

Do not use the unit near heating appliances, heat sources or open flame.

Do not use the unit in places where aerosols are used or sprayed, and in proximity to inflammable liquids.

Do not use the unit in proximity to the kitchen sink, in bathrooms, near swimming pools or other containers filled with water.

If the unit is dropped into water, unplug it immediately, and only then you can take the unit out of water. Apply to the authorized service center for testing or repairing the unit.

Do not let the power cord hang over the edge of the table or touch hot surfaces and sharp edges of furniture.

Unplug the unit after usage or before cleaning. When unplugging the unit, hold the power plug and carefully remove it from the mains socket, do not pull the power cord, as this can lead to its damage and cause a short circuit.

Do not touch the unit body, the power cord and the power plug with wet hands.

Before using the unit for the first time, wash all the removable parts that will contact food thoroughly.

Use only the parts supplied.

Do not touch rotating parts of the unit. Do not let hair or free hanging clothes get into the rotation area of the blender attachment knife.

Before switching the unit on, make sure that the knife

block and the bottle are installed properly and fixed.

Put the products into the bottle before switching the unit on. Do not switch the unit on if the bottle is empty.

Cool down hot products before putting them into the bottle.

Watch the amount of products put in the bottle and the level of poured liquids.

The cutting edges of the knife block are sharp and dangerous, handle the knife block carefully.

If the knife block stops rotating during the unit operation, unplug the unit, remove the bottle, remove the knife block and remove the product which is hindering the knife block rotation. Always add enough water or juice into the bottle.

Remove the bottle from the motor unit only after disconnecting the motor unit from the mains.

Do not put the bottle into a microwave oven.

Do not wash the removable parts of the blender in a dishwashing machine.

For children safety reasons do not leave polyethylene

bags used as a packaging unattended. ATTENTION! Do not allow children to play with polyethylene bags or packaging film. Danger of

suffocation!

The unit is not intended for usage by children.

Do not leave children unattended to prevent using

EN 5

the unit as a toy.

Do not allow children to touch the operating surface, the unit body, the power cord or the power plug during operation of the unit.

Be especially careful if children or disabled persons are near the operating unit.

During the unit operation and breaks between operation cycles, place the unit out of reach of children.

The unit is not intended for usage by physically or mentally disabled persons (including children) or by persons lacking experience or knowledge if they are not under supervision of a person who is responsible for their safety or if they are not instructed by this person on the usage of the unit.

From time to time check the power cord integrity.

If the power cord is damaged, it should be replaced by the manufacturer, a maintenance service or similar qualified personnel to avoid danger.

Do not repair the unit by yourself. Do not disassemble the unit by yourself, if any malfunction is detected, and after the unit was dropped, unplug it and apply to the service center.

To avoid damages, transport the unit in the original package.

Keep the unit in a dry cool place out of reach of children and disabled persons.

6 EN

THE UNIT IS INTENDED FOR HOUSEHOLD USE ONLY, DO NOT USE THE UNIT FOR COMMERCIAL OR LABORATORY PURPOSES.

BEFORE THE FIRST USE

After the unit’s transportation or storage at negative temperature, unpack it and wait for at least 3 hours before using it.

Unpack the unit and remove all the packaging materials.

Keep the original package.

Read the safety measures and operating recommendations.

Check the delivery set.

Examine the unit for damages, in case of damage do not plug it into the mains.

Make sure that specified specifications of power supply voltage of the unit correspond to the specifications of your mains. When using the unit in the mains with 60 Hz frequency, the unit does not need any additional settings.

Before using the unit, wash the lid (6) and the bottle

(7) with warm water and a neutral detergent, then rinse and dry.

Wash only the lower part of the blender attachment (1), clean the outer surface with a slightly damp cloth. Never immerse the blender attachment (1) into water or any other liquids completely.

Wash the knife block (5) (only from the knives side) with warm water and neutral detergent, rinse and dry.

The cutting edges of the knife block (5) are sharp and can be dangerous, handle the knife block (5) carefully.

Clean the motor unit (2) body with a soft, slightly damp cloth, and then wipe it dry.

Do not immerse the blender attachment (1), the motor unit (2), the knife block (5), the power cord and the power plug into water or any other liquids.

USING THE BLENDER ATTACHMENT

Continuous operation time should not exceed 30 seconds while using the blender attachment (1). Make at least a 3 minutes break between the operation cycles.

Before installing the blender attachment (1), make sure that the power plug is not inserted into the mains socket.

Insert the blender attachment (1) into the motor unit (2), and turn it counterclockwise as far as it will go, make sure that the attachment is fixed properly (pic. 1).

Insert the power plug into the mains socket.

Immerse the blender attachment (1) into the bowl with products that you want to chop/mix.

ATTENTION! Hold the motor unit (2) with the blender attachment (1) vertically while processing the food.

Press and hold down the button (4) to switch on, use this operating mode for mixing liquid products.

When you press and hold down the button (3) «TURBO», the blender will switch on at the maximal rotation speed. Use this mode to process liquid and hard products.

Notes:

products should be put into a suitable bowl before the blender is switched on. The amount of products to be processed should not exceed 2/3 of the capacity of the bowl in which they are processed.

before chopping and mixing peel the fruit or vegetables, remove inedible parts, such as stones, and cut the fruit or vegetables into 15x15x15 mm cubes. Put them into a bowl and add some juice or water.

do not chop or mix frozen food.

ATTENTION!

When chopping hard vegetables, for example, carrots

— cut the carrot into small 15x15x15 mm pieces and put them into a suitable bowl. The maximal weight of the carrot should not exceed 250 g. Add 350 ml of water.

Release the button (3 or 4) to switch the blender off.

After you finish the unit operation, take the power plug out of the mains socket and remove the blender attachment (1), turning it clockwise.

ATTENTION!

– Do not remove the blender attachment (1) during the unit operation.

EN 7

To avoid damaging the knives of the blender attachment (1) do not process very hard products, such as cereals, rice, coffee beans, hard cheese, frozen food etc.

If the foodstuffs are hard to chop with the blender attachment (1), add some water, juice, liquor etc.

COOKING FOOD IN THE BOTTLE (7)

Continuous operation time should not exceed 30 seconds while using the bottle attachment (7). Make at least a 3 minutes break between the operation cycles.

Use the bottle (7) attachment for making fruit and berry or vegetable mixes containing enough juice.

ATTENTION! Do not process very hard products, such as nutmegs, coffee beans, cereals, frozen food or ice.

Notes:

before chopping and mixing peel the fruit or vegetables, remove inedible parts, such as stones, and cut the fruit or vegetables into 15x15x15 mm cubes. Put them into the bottle (7) and add some juice or water.

do not chop or mix frozen food.

Before installing the motor unit (2), make sure that the power plug is not inserted into the mains socket.

8EN

Put the necessary ingredients in the bottle (7) (pic. 2).

Install the knife block (5) on the bottle (7) and turn it clockwise (pic. 3). Do not make excessive efforts while turning the knife block (5).

Install the motor unit (2) in the knife block (5), turn the motor unit (2) clockwise until bumping (pic. 4), make sure that the motor unit (2) is fixed properly.

Insert the power plug into the mains socket.

Turn the blender with the bottle (7) up.

ATTENTION! Do not process the products if you hold the unit with the bottle down! (pic. 7)

Press and hold down the button (4) to switch on, use this operating mode for mixing liquid products.

When you press and hold down the button (3) «TURBO», the blender will switch on at the maximal rotation speed. Use this mode to process liquid and hard products.

Note: do not switch the unit on when the bottle (7) is empty.

Release the button (3 or 4) to switch the blender off.

Unplug the unit after you finish using it.

After you finish cooking, turn the unit with the bottle

(7) down.

Remove the motor unit (2) turning it counterclockwise.

Remove the knife block (5) from the bottle (7) turning the knife block (5) counterclockwise.

Pour the prepared products from the bottle (7) to a suitable container.

Wash the bottle (7) and the knife block (5) (only from the knives side).

ATTENTION: The knife block (5) cutting edges are very sharp and dangerous. Handle the knife block

(5) carefully.

You can keep the ready food in the bottle (7). Remove the knife block (5) from the bottle (7) turning it counterclockwise, take the lid (6) and thread it rotating clockwise on the bottle (7).

When you use the lid (6), open the valve, pour the necessary amount of liquid and close the valve.

Wash the bottle (7) and the lid (6) after the use.

CLEANING

Unplug the unit after you finish using it.

Wash the lid (6) and the bottle (7) with warm water and neutral detergent and dry them.

Wash only the lower part of the blender attachment (1), clean the outer surface with a slightly damp cloth. Never immerse the blender attachment (1) into water or any other liquids completely.

Wash the knife block (5) (only from the knives side) with warm water and neutral detergent, rinse and dry.

Clean the motor unit (2) with a soft, slightly damp cloth and then wipe it dry.

Do not immerse the motor unit (2), the blender

attachment (1), the knife block (5) into any liquids, do not wash them under water jet or in a dishwashing machine.

Do not use abrasives and solvents to clean the motor unit body (2) and the removable parts.

STORAGE

Clean the unit parts before taking it away for long storage.

Do not wind the power cord around the motor unit

(2).

Keep the unit in a dry cool place out of reach of children and disabled persons.

DELIVERY SET

1.Motor unit – 1 pc.

2.Blender attachment – 1 pc.

3.Knife block – 1 pc.

4.Bottle – 1 pc.

5.Manual – 1 pc.

TECHNICAL SPECIFICATIONS

Power supply: 220-240 V ~ 50/60 Hz

Rated input power: 600 W

Bottle capacity: - 0,6 l

Maximal operation time: - 30 seconds

EN 9

RECYCLING

To prevent possible damage to the environment or harm to the health of people by uncontrolled waste disposal,

after expiration of the service life of the

unit or the batteries (if included), do not discard them with usual household waste,

but take the unit and the batteries to specialized stations for further recycling.

The waste generated during the disposal of the unit is subject to mandatory collection and consequent disposal in the prescribed manner.

For further information about recycling of this product apply to a local municipal administration, a disposal service or to the shop where you purchased this product.

The manufacturer reserves the right to change the appearance, design and specifications not affecting general operation principles of the unit, without prior notice.

The unit operating life is 3 years

The manufacturing date is specified in the serial number.

In case of any malfunctions promptly apply to the authorized service center.

10 DEDE

BLENDER BR1245

Der Mixer-Satz enthält einen Stabmixeraufsatz und einen Der Flasche. Der Stabmixeraufsatz wird zum Mixen, Zerkleinern oder Schlagen von

Nahrungsmitteln verwendet. Im Der Flasche können

Sie flüssige Obstoder Gemüsemischungen zubereiten, mit aufgesetztem Deckel können Sie den Der Flasche jederzeit verwenden.

BESCHREIBUNG

1.Stabmixeraufsatz

2.Motoreinheit

3.Maximalgeschwindigkeitseinschalttaste «TURBO»

4.Einschalttaste

5.Messereinheit

6.Flaschenverschluss

7.Der Flasche

4 6 3

2

1

5

7

SICHERHEITSHINWEISE UND BEDIENUNGSANLEITUNG

Bevor Sie das Gerät benutzen, lesen Sie zuerst die Bedienungsanleitung aufmerksam durch und bewahren Sie sie zum späteren Gebrauch auf.

Benutzen Sie das Gerät nur bestimmungsmäßig und laut dieser Bedienungsanleitung.

Missbrauch des Geräts kann zu seiner Störung führen, den Benutzer oder sein Eigentum beschädigen und ist kein Garantiefall.

Vergewissern Sie sich, dass die auf dem Bezeichnungszettel angegebene Betriebsspannung und die Netzspannung übereinstimmen.

ACHTUNG! Der Betrieb soll 15 Sekunden mit dem Stabmixeraufsatz und 30 Sekunden mit dem Der

Flascheaufsatz nicht überschreiten. Machen Sie eine mindestens 3-Minuten-Betriebszyklenpause.

Es ist nicht gestattet, das Gerät draußen zu benutzen.

Es ist nicht empfohlen, das Gerät bei Gewitter zu benutzen.

Installieren und verwenden Sie das Gerät auf einer ebenen, trockenen und standfesten Oberfläche.

Schützen Sie das Gerät vor Stößen, Stürzen, Vibrationen und anderen mechanischen Einwirkungen.

Lassen Sie das ans Stromnetz angeschlossene Gerät nie unbeaufsichtigt.

DE 11

Benutzen Sie das Gerät in direkter Nähe von

Heizgeräten, Wärmequellen oder offenem Feuer nicht.

Es ist verboten, das Gerät an den Orten, wo Sprays verwendet werden, sowie in der Nähe von leichtentzündbaren Flüssigkeiten zu benutzen.

Benutzen Sie das Gerät in der Nähe von Spülbecken, in Badezimmern und neben den Wasserbecken oder anderen mit Wasser gefüllten Behältern nicht.

Falls das Gerät ins Wasser gefallen ist, ziehen Sie den Netzstecker aus der Steckdose sofort heraus, erst danach holen Sie das Gerät aus dem Wasser heraus. Wenden Sie sich an einen autorisierten Kundendienst, um das Gerät prüfen oder reparieren zu lassen.

Lassen Sie das Netzkabel von der Tischkante nicht herabhängen, heiße Oberflächen und scharfe

Möbelkanten nicht berühren.

Trennen Sie das Gerät nach dem Gebrauch oder vor der Reinigung vom Stromnetz ab. Wenn Sie das Gerät vom Stromnetz abtrennen, halten Sie den Netzstecker fest und ziehen Sie ihn aus der Steckdose vorsichtig heraus; ziehen Sie das Netzkabel nicht, da es zu seiner Beschädigung und einem Kurzschluss führen kann.

Berühren Sie das Gerätegehäuse, das Netzkabel und den Netzstecker mit nassen Händen nicht.

Vor dem ersten Gerätebetrieb spülen Sie alle mit den Nahrungsmitteln zu kontaktierenden abnehmbaren Teile sorgfältig durch.

Loading...
+ 13 hidden pages