Mounting Hardware Included
Attaching the Head Rail
to
the Brackets
~
f1f1
Two L-brackets and four screws
Mounting the Brackets for your Shade:
OUTSIDE MOUNT
Place the bracket above the window as shown
least 3" away from the end
at
Repeat this step
to
install the bracket on the other side.
of
the headrail. Screw
in
the diagram and
in
the bracket.
1. Slide back rail (B) onto
@ @
0
the back catch
bracket (A) which has been
mounted to the window
frame.
2.
Roll the front rail (D)
the shade up to the front
of
catch
Push
in
and then
rail is
in
of
the
the bracket (C).
the plastic piece
release once the
place .
SHADE
SIDE
Adjusting the Tension
You
can adjust your Roman Shade if it has too much tension
(springs up too
slowly). For your convenience 2 dials have been incorporated
into the
If
when you turn the dial down towards the floor
speed
it will decrease the speed
headrail.
you use the dial on the left as shown
of
quickly) or too little tension (reaches the top too
the shade and if you turn the dial up towards the ceiling
of
the shade.
On
Your Shade:
in
the below illustration,
it
will increase the
of
INSIDE MOUNT
Place the bracket inside the window frame as shown
diagram and at
in
the bracket. Repeat this step
side.
least 3" away from the end
to
install the bracket
of
the headrail. Screw
in
the
on
the other
If you use the dial on the right side, when you turn the dial down
towards the
turning the
the shade .
floor
it
will decrease the speed
dial up towards the ceiling will increase the speed
0
Rotate dial down for faster
Rotate
of
the shade and
dial up for slower
of
SPEED ADJUSTMENT DIAL
Loading...